|
4d99c4cf
|
2016-11-23T18:32:48
|
|
Allow for caching of submodules.
Added `git_repository_submodule_cache_all` to initialze a cache of
submodules on the repository so that operations looking up N
submodules are O(N) and not O(N^2). Added a
`git_repository_submodule_cache_clear` function to remove the cache.
Also optimized the function that loads all submodules as it was itself
O(N^2) w.r.t the number of submodules, having to loop through the
`.gitmodules` file once per submodule. I changed it to process the
`.gitmodules` file once, into a map.
Signed-off-by: David Turner <dturner@twosigma.com>
|
|
909d5494
|
2016-12-29T12:25:15
|
|
giterr_set: consistent error messages
Error messages should be sentence fragments, and therefore:
1. Should not begin with a capital letter,
2. Should not conclude with punctuation, and
3. Should not end a sentence and begin a new one
|
|
0f316096
|
2016-11-11T16:55:33
|
|
repository: do not interpret all files as gitlinks in discovery
When trying to find a discovery, we walk up the directory
structure checking if there is a ".git" file or directory and, if
so, check its validity. But in the case that we've got a ".git"
file, we do not want to unconditionally assume that the file is
in fact a ".git" file and treat it as such, as we would error out
if it is not.
Fix the issue by only treating a file as a gitlink file if it
ends with "/.git". This allows users of the function to discover
a repository by handing in any path contained inside of a git
repository.
|
|
c9e967a1
|
2016-11-10T03:51:12
|
|
git_repository_open_ext: fix handling of $GIT_NAMESPACE
The existing code would set a namespace of "" (empty string) with
GIT_NAMESPACE unset. In a repository where refs/heads/namespaces/
exists, that can produce incorrect results. Detect that case and avoid
setting the namespace at all.
Since that makes the last assignment to error conditional, and the
previous assignment can potentially get GIT_ENOTFOUND, set error to 0
explicitly to prevent the call from incorrectly failing with
GIT_ENOTFOUND.
|
|
|
b118f647
|
2016-07-22T14:02:00
|
|
repository: don't cast to `int` for no reason
And give it a default so that some compilers don't (unnecessarily)
complain.
|
|
|
2b490284
|
2016-06-24T15:59:37
|
|
find_repo: Clean up and simplify logic
find_repo had a complex loop and heavily nested conditionals, making it
difficult to follow. Simplify this as much as possible:
- Separate assignments from conditionals.
- Check the complex loop condition in the only place it can change.
- Break out of the loop on error, rather than going through the rest of
the loop body first.
- Handle error cases by immediately breaking, rather than nesting
conditionals.
- Free repo_link unconditionally on the way out of the function, rather
than in multiple places.
- Add more comments on the remaining complex steps.
|
|
|
0dd98b69
|
2016-04-03T17:22:07
|
|
Add GIT_REPOSITORY_OPEN_FROM_ENV flag to respect $GIT_* environment vars
git_repository_open_ext provides parameters for the start path, whether
to search across filesystems, and what ceiling directories to stop at.
git commands have standard environment variables and defaults for each
of those, as well as various other parameters of the repository. To
avoid duplicate environment variable handling in users of libgit2, add a
GIT_REPOSITORY_OPEN_FROM_ENV flag, which makes git_repository_open_ext
automatically handle the appropriate environment variables. Commands
that intend to act just like those built into git itself can use this
flag to get the expected default behavior.
git_repository_open_ext with the GIT_REPOSITORY_OPEN_FROM_ENV flag
respects $GIT_DIR, $GIT_DISCOVERY_ACROSS_FILESYSTEM,
$GIT_CEILING_DIRECTORIES, $GIT_INDEX_FILE, $GIT_NAMESPACE,
$GIT_OBJECT_DIRECTORY, and $GIT_ALTERNATE_OBJECT_DIRECTORIES. In the
future, when libgit2 gets worktree support, git_repository_open_env will
also respect $GIT_WORK_TREE and $GIT_COMMON_DIR; until then,
git_repository_open_ext with this flag will error out if either
$GIT_WORK_TREE or $GIT_COMMON_DIR is set.
|
|
|
39c6fca3
|
2016-04-03T16:01:01
|
|
Add GIT_REPOSITORY_OPEN_NO_DOTGIT flag to avoid appending /.git
GIT_REPOSITORY_OPEN_NO_SEARCH does not search up through parent
directories, but still tries the specified path both directly and with
/.git appended. GIT_REPOSITORY_OPEN_BARE avoids appending /.git, but
opens the repository in bare mode even if it has a working directory.
To support the semantics git uses when given $GIT_DIR in the
environment, provide a new GIT_REPOSITORY_OPEN_NO_DOTGIT flag to not try
appending /.git.
|
|
|
ed577134
|
2016-04-03T19:24:15
|
|
Fix repository discovery with ceiling_dirs at current directory
git only checks ceiling directories when its search ascends to a parent
directory. A ceiling directory matching the starting directory will not
prevent git from finding a repository in the starting directory or a
parent directory. libgit2 handled the former case correctly, but
differed from git in the latter case: given a ceiling directory matching
the starting directory, but no repository at the starting directory,
libgit2 would stop the search at that point rather than finding a
repository in a parent directory.
Test case using git command-line tools:
/tmp$ git init x
Initialized empty Git repository in /tmp/x/.git/
/tmp$ cd x/
/tmp/x$ mkdir subdir
/tmp/x$ cd subdir/
/tmp/x/subdir$ GIT_CEILING_DIRECTORIES=/tmp/x git rev-parse --git-dir
fatal: Not a git repository (or any of the parent directories): .git
/tmp/x/subdir$ GIT_CEILING_DIRECTORIES=/tmp/x/subdir git rev-parse --git-dir
/tmp/x/.git
Fix the testsuite to test this case (in one case fixing a test that
depended on the current behavior), and then fix find_repo to handle this
case correctly.
In the process, simplify and document the logic in find_repo():
- Separate the concepts of "currently checking a .git directory" and
"number of iterations left before going further counts as a search"
into two separate variables, in_dot_git and min_iterations.
- Move the logic to handle in_dot_git and append /.git to the top of the
loop.
- Only search ceiling_dirs and find ceiling_offset after running out of
min_iterations; since ceiling_offset only tracks the longest matching
ceiling directory, if ceiling_dirs contained both the current
directory and a parent directory, this change makes find_repo stop the
search at the parent directory.
|
|
|
d5592378
|
2016-04-26T11:39:53
|
|
annotated_commit: provide refs and description
Differentiate between the ref_name used to create an annotated_commit
(that can subsequently be used to look up the reference) and the
description that we resolved this with (which _cannot_ be looked up).
The description is used for things like reflogs (and may be a ref name,
and ID something that we revparsed to get here), while the ref name must
actually be a reference name, and is used for things like rebase to
return to the initial branch.
|
|
62602547
|
2015-12-26T22:39:22
|
|
git_repository_init: include dotfiles when copying templates
Include dotfiles when copying template directory, which will handle
both a template directory itself that begins with a dotfile, and
any dotfiles inside the directory.
|
|
2ea40fda
|
2015-11-20T13:19:23
|
|
repository: distinguish sequencer cherry-pick and revert
These are not quite like their plain counterparts and require special handling.
|
|
4f971852
|
2015-10-28T10:15:24
|
|
repository: plug memory leak
cc @carlosmn
|
|
|
8c7c5fa5
|
2015-10-20T17:42:42
|
|
config: add a ProgramData level
This is where portable git stores the global configuration which we can
use to adhere to it even though git isn't quite installed on the system.
|
|
|
aebddbe7
|
2015-09-21T06:01:03
|
|
Merge pull request #3434 from ethomson/reservednames
Win32 Reserved names: don't reserve names outside the working directory
|
|
538dfc88
|
2015-09-17T18:12:05
|
|
repository: only reserve repo dirs in the workdir
Check that the repository directory is beneath the workdir before
adding it to the list of reserved paths. If it is not, then there
is no possibility of checking out files into it, and it should not
be a reserved word.
This is a particular problem with submodules where the repo directory
may be in the super's .git directory.
|
|
|
ac2fba0e
|
2015-09-16T15:07:27
|
|
git_futils_mkdir_*: make a relative-to-base mkdir
Untangle git_futils_mkdir from git_futils_mkdir_ext - the latter
assumes that we own everything beneath the base, as if it were
being called with a base of the repository or working directory,
and is tailored towards checkout and ensuring that there is no
bogosity beneath the base that must be cleaned up.
This is (at best) slow and (at worst) unsafe in the larger context
of a filesystem where we do not own things and cannot do things like
unlink symlinks that are in our way.
|
|
|
bdec3363
|
2015-08-03T17:48:33
|
|
win32: ensure hidden files can be staged
|
|
526f91f5
|
2015-07-01T14:58:13
|
|
Fix 8.3 filename tests failure when 8.3 is disabled
|
|
|
daacf96d
|
2015-06-24T23:34:40
|
|
Merge pull request #3097 from libgit2/cmn/submodule-config-state
Remove run-time configuration settings from submodules
|
|
6a8f3fa8
|
2015-06-23T20:59:03
|
|
Fixed invalid error handling in git_repository_open_ext()
|
|
|
16c73d38
|
2015-06-23T20:44:27
|
|
repository: check the format version
This is something we do on re-init but not when opening a
repository. This hasn't particularly mattered up to now as the version
has been 0 ever since the first release of git, but the times, they're
a-changing and we will soon see version 1 in the wild. We need to make
sure we don't open those.
|
|
|
99e11cdd
|
2015-06-23T20:43:49
|
|
repository: don't error out if there is no version
git will assume the repository format version is 0 if the value is not
there. Do the same.
|
|
|
dfda2f68
|
2015-04-27T19:27:29
|
|
submodule: remove the per-repo cache
Having this cache and giving them out goes against our multithreading
guarantees and it makes it impossible to use submodules in a
multi-threaded environment, as any thread can ask for a refresh which
may reallocate some string in the submodule struct which we've accessed
in a different one via a getter.
This makes the submodules behave more like remotes, where each object is
created upon request and not shared except explicitly by the user. This
means that some tests won't pass yet, as they assume they can affect the
submodule objects in the cache and that will affect later operations.
|
|
|
63af449e
|
2015-04-10T11:33:14
|
|
Merge pull request #3030 from linquize/symlink_supported
If work_dir is not specified, use repo_dir to test if symlink is supported
|
|
|
466d2e7a
|
2015-04-03T19:01:20
|
|
For bare repository, use repo_dir to test if symlinks are supported
|
|
|
78db0239
|
2015-03-24T20:58:00
|
|
squash some leaks
|
|
|
83ad46f7
|
2015-03-18T04:59:16
|
|
Merge remote-tracking branch 'ethomson/submodule_8dot3'
|
|
|
62d38a1d
|
2015-03-06T23:51:40
|
|
Add annotated commit versions of reflog-modifying functions
We do not always want to put the id directly into the reflog, but we
want to speicfy what a user typed. For this use-case we provide
annotated version of a few functions which let the caller specify what
user-friendly name was used when asking for the operation.
|
|
|
770aca94
|
2015-03-10T15:02:02
|
|
repository: in-memory repos are bare by default
|
|
|
fe21d708
|
2015-03-04T00:29:37
|
|
Plug a few leaks
|
|
|
9a97f49e
|
2014-12-21T15:31:03
|
|
config: borrow refcounted references
This changes the get_entry() method to return a refcounted version of
the config entry, which you have to free when you're done.
This allows us to avoid freeing the memory in which the entry is stored
on a refresh, which may happen at any time for a live config.
For this reason, get_string() has been forbidden on live configs and a
new function get_string_buf() has been added, which stores the string in
a git_buf which the user then owns.
The functions which parse the string value takea advantage of the
borrowing to parse safely and then release the entry.
|
|
|
4e498646
|
2015-01-15T16:50:31
|
|
repository: remove log message override for switching the active branch
We want to use the "checkout: moving from ..." message in order to let
git know when a change of branch has happened. Make the convenience
functions for this goal write this message.
|
|
|
659cf202
|
2015-01-07T12:23:05
|
|
Remove the signature from ref-modifying functions
The signature for the reflog is not something which changes
dynamically. Almost all uses will be NULL, since we want for the
repository's default identity to be used, making it noise.
In order to allow for changing the identity, we instead provide
git_repository_set_ident() and git_repository_ident() which allow a user
to override the choice of signature.
|
|
|
4196dd8e
|
2015-02-26T15:33:58
|
|
repository: Introduce "reserved names"
A repository can have multiple "reserved names" now, not just
a single "short name" for the repository folder itself. Refactor
to include a git_repository__reserved_names that returns all the
reserved names for a repository.
|
|
|
795eaccd
|
2015-02-19T11:09:54
|
|
git_filter_opt_t -> git_filter_flag_t
For consistency with the rest of the library, where an opt is an
options *structure*.
|
|
|
cc36f424
|
2015-02-06T01:09:26
|
|
repository: parse init.templatedir as a path
This is a path so we must use the path getter so we get the tilde
expansion done.
|
|
|
5f28ec84
|
2015-02-03T12:16:11
|
|
win32: cleanup 8.3 disabled tests
|
|
|
9dcc4a36
|
2015-01-28T23:04:50
|
|
Fix test failures when 8.3 is disabled
|
|
|
27242199
|
2015-01-26T11:27:09
|
|
Merge pull request #2837 from swisspol/set_index
Allow passing a NULL index to git_repository_set_index()
|
|
|
b2a7bcdb
|
2015-01-23T20:57:13
|
|
Fixed git_repository_set_bare() not setting "core.bare" correctly
|
|
|
fa8ca519
|
2015-01-23T15:35:29
|
|
Allow passing a NULL index to git_repository_set_index()
This is supported by the underlying set_index() implementation
and setting the repository index to NULL is recommended by the
git_repository_set_bare() documentation.
|
|
526182d2
|
2015-01-20T23:24:32
|
|
Remove logically dead code (we're already asserting)
|
|
|
3dbd9a0e
|
2014-12-24T11:43:38
|
|
Check the result of git_buf_joinpath
|
|
|
a64119e3
|
2014-11-25T18:13:00
|
|
checkout: disallow bad paths on win32
Disallow:
1. paths with trailing dot
2. paths with trailing space
3. paths with trailing colon
4. paths that are 8.3 short names of .git folders ("GIT~1")
5. paths that are reserved path names (COM1, LPT1, etc).
6. paths with reserved DOS characters (colons, asterisks, etc)
These paths would (without \\?\ syntax) be elided to other paths - for
example, ".git." would be written as ".git". As a result, writing these
paths literally (using \\?\ syntax) makes them hard to operate with from
the shell, Windows Explorer or other tools. Disallow these.
|
|
|
867a36f3
|
2014-07-14T14:35:01
|
|
Introduce git_rebase to set up a rebase session
Introduce `git_rebase` to set up a rebase session that can
then be continued. Immediately, only merge-type rebase is
supported.
|
|
|
7c9bf891
|
2014-10-03T19:34:37
|
|
repository_head_unborn: clear error when HEAD is unborn
|
|
|
74240afb
|
2014-09-17T15:35:50
|
|
repository: Do not double-free config
|
|
1fbeb2f0
|
2014-09-15T21:59:23
|
|
Fix attribute lookup in index for bare repos
When using a bare repo with an index, libgit2 attempts to read
files from the index. It caches those files based on the path
to the file, specifically the path to the directory that contains
the file.
If there is no working directory, we use `git_path_dirname_r` to
get the path to the containing directory. However, for the
`.gitattributes` file in the root of the repository, this ends up
normalizing the containing path to `"."` instead of the empty
string and the lookup the `.gitattributes` data fails.
This adds a test of attribute lookups on bare repos and also
fixes the problem by simply rewriting `"."` to be `""`.
|
|
bc737620
|
2014-08-20T10:24:41
|
|
Introduce option to use relative paths for repository work directory
Teach git_repository_init_ext to use relative paths for the gitlink
to the work directory. This is used when creating a sub repository
where the sub repository resides in the parent repository's
.git directory.
|
|
|
0ba4dca5
|
2014-07-22T10:40:23
|
|
git_cherry_pick -> git_cherrypick
|
|
517341c5
|
2014-05-23T22:41:35
|
|
Address style concerns in setting mkdir/copy flags.
|
|
|
bafaf790
|
2014-05-16T08:09:20
|
|
Fixed permissions on template directories.
|
|
|
2b52a0bf
|
2014-05-13T16:32:27
|
|
Increase use of config snapshots
And decrease extra reload checks of config data.
|
|
|
df341926
|
2014-05-12T10:51:56
|
|
Merge pull request #2336 from libgit2/rb/unicode-branch-names
Pass unconverted Unicode path data when iconv doesn't like it
|
|
|
b1914c36
|
2014-05-12T10:24:46
|
|
Minor fixes for warnings and error propagation
|
|
|
d2c4d1c6
|
2014-05-12T10:04:52
|
|
Merge pull request #2188 from libgit2/cmn/config-snapshot
Configuration snapshotting
|
|
|
43a04135
|
2014-05-08T13:52:46
|
|
Pass unconverted data when iconv doesn't like it
When using Iconv to convert unicode data and iconv doesn't like
the source data (because it thinks that it's not actual UTF-8),
instead of stopping the operation, just use the unconverted data.
This will generally do the right thing on the filesystem, since
that is the source of the non-UTF-8 path data anyhow.
This adds some tests for creating and looking up branches with
messy Unicode names. Also, this takes the helper function that
was previously internal to `git_repository_init` and makes it
into `git_path_does_fs_decompose_unicode` which is a useful in
tests to understand what the expected results should be.
|
|
|
ac99d86b
|
2014-05-07T11:34:32
|
|
repository: introduce a convenience config snapshot method
Accessing the repository's config and immediately taking a snapshot of
it is a common operation, so let's provide a convenience function for
it.
|
|
|
5269008c
|
2014-05-06T16:01:49
|
|
Add filter options and ALLOW_UNSAFE
Diff and status do not want core.safecrlf to actually raise an
error regardless of the setting, so this extends the filter API
with an additional options flags parameter and adds a flag so that
filters can be applied with GIT_FILTER_OPT_ALLOW_UNSAFE, indicating
that unsafe filter application should be downgraded from a failure
to a warning.
|
|
|
702efc89
|
2014-04-30T10:57:42
|
|
Make init_options fns use unsigned ints and macro
Use an unsigned int for the version and add a helper macro so the
code is simplified (and so the error message is a common string).
|
|
c2c81615
|
2014-04-19T18:05:31
|
|
Win32: UTF-8 <-> WCHAR conversion overhaul
|
|
|
29c4cb09
|
2014-03-15T03:53:36
|
|
Use config snapshotting
This way we can assume we have a consistent view of the config situation
when we're looking up remote, branch, pack-objects, etc.
|
|
|
c3dcbe84
|
2014-04-09T12:43:27
|
|
Rewrite `git_repository__cleanup_files`
|
|
|
c0311295
|
2014-04-07T17:32:23
|
|
git_repository_state_cleanup() should remove rebase-merge/, rebase-apply/ and BISECT_LOG
|
|
|
69b6ffc4
|
2014-03-28T14:02:21
|
|
Make a real submodule cache object
This takes the old submodule cache which was just a git_strmap
and makes a real git_submodule_cache object that can contain other
things like a lock and timestamp-ish data to control refreshing of
submodule info.
|
|
b9f81997
|
2014-03-05T21:49:23
|
|
Added function-based initializers for every options struct.
The basic structure of each function is courtesy of arrbee.
|
|
cb81c3a7
|
2014-02-25T10:46:41
|
|
Merge pull request #2138 from ethomson/sysdir
Move system directory cache out of utils
|
|
|
4f46a98b
|
2014-02-24T23:32:25
|
|
Remove now-duplicated stdarg.h include
|
|
|
83634d38
|
2014-02-24T17:43:10
|
|
Move system directory cache out of utils
|
|
864535cf
|
2014-02-18T14:07:42
|
|
Readability
|
|
|
9bda5fb8
|
2014-02-18T14:05:30
|
|
Improve error propagation in shallow call
|
|
|
2d929194
|
2014-02-07T16:14:17
|
|
Merge pull request #2099 from libgit2/bs/more-reflog-stuff
More reflogness
|
|
|
3158e2fe
|
2014-02-07T15:24:39
|
|
Fix some Windows warnings
This fixes a number of warnings with the Windows 64-bit build
including a test failure in test_repo_message__message where an
invalid pointer to a git_buf was being used.
|
|
|
010cec3a
|
2014-02-04T20:50:40
|
|
Add reflog params to git_repository_detach_head
|
|
|
94f263f5
|
2014-01-25T08:04:49
|
|
Add reflog params to set-head calls
|
|
|
ee550477
|
2014-01-26T16:11:18
|
|
config: use git_buf for returning paths
Again, we already did this internally, so simply remove the conversions.
|
|
|
7a3bd1e7
|
2014-01-26T15:35:17
|
|
repository: move to use a git_buf for outputting strings
Since we now export that type, we can avoid making the user guess a
size.
|
|
|
6b415f62
|
2014-01-17T13:46:44
|
|
Convert gitdir paths to posix on Windows
Apparently, a .git file with "gitdir: path" link on Windows is
allowed to use backslashes in the path. Who knew?
|
|
|
0b28217b
|
2014-01-15T12:51:31
|
|
refs: remove the _with_log differentiation
Any well-behaved program should write a descriptive message to the
reflog whenever it updates a reference. Let's make this more prominent
by removing the version without the reflog parameters.
|
|
|
25e0b157
|
2013-12-06T15:07:57
|
|
Remove converting user error to GIT_EUSER
This changes the behavior of callbacks so that the callback error
code is not converted into GIT_EUSER and instead we propagate the
return value through to the caller. Instead of using the
giterr_capture and giterr_restore functions, we now rely on all
functions to pass back the return value from a callback.
To avoid having a return value with no error message, the user
can call the public giterr_set_str or some such function to set
an error message. There is a new helper 'giterr_set_callback'
that functions can invoke after making a callback which ensures
that some error message was set in case the callback did not set
one.
In places where the sign of the callback return value is
meaningful (e.g. positive to skip, negative to abort), only the
negative values are returned back to the caller, obviously, since
the other values allow for continuing the loop.
The hardest parts of this were in the checkout code where positive
return values were overloaded as meaningful values for checkout.
I fixed this by adding an output parameter to many of the internal
checkout functions and removing the overload. This added some
code, but it is probably a better implementation.
There is some funkiness in the network code where user provided
callbacks could be returning a positive or a negative value and
we want to rely on that to cancel the loop. There are still a
couple places where an user error might get turned into GIT_EUSER
there, I think, though none exercised by the tests.
|
|
|
9f77b3f6
|
2013-11-25T14:21:34
|
|
Add config read fns with controlled error behavior
This adds `git_config__lookup_entry` which will look up a key in
a config and return either the entry or NULL if the key was not
present. Optionally, it can either suppress all errors or can
return them (although not finding the key is not an error for this
function). Unlike other accessors, this does not normalize the
config key string, so it must only be used when the key is known
to be in normalized form (i.e. all lower-case before the first dot
and after the last dot, with no invalid characters).
This also adds three high-level helper functions to look up config
values with no errors and a fallback value. The three functions
are for string, bool, and int values, and will resort to the
fallback value for any error that arises. They are:
* `git_config__get_string_force`
* `git_config__get_bool_force`
* `git_config__get_int_force`
None of them normalize the config `key` either, so they can only
be used for internal cases where the key is known to be in normal
format.
|
|
|
bab0b9f2
|
2013-11-22T18:02:12
|
|
clean up state metadata more consistently
|
|
40b99d05
|
2013-11-08T12:14:31
|
|
splitting funcionality in two methods to avoid ambiguity with NULL
|
|
|
0fe522d1
|
2013-11-07T14:16:20
|
|
allowing create remote with custom fetch spec
|
|
|
1d3a8aeb
|
2013-11-04T18:28:57
|
|
move mode_t to filebuf_open instead of _commit
|
|
|
867f7c9b
|
2013-10-08T16:59:59
|
|
Rename new fn to git_repository_reinit_filesystem
|
|
|
14997dc5
|
2013-10-08T12:45:43
|
|
More filemode cleanups for FAT on MacOS
This cleans up some additional issues. The main change is that
on a filesystem that doesn't support mode bits, libgit2 will now
create new blobs with GIT_FILEMODE_BLOB always instead of being
at the mercy to the filesystem driver to report executable or not.
This means that if "core.filemode" lies and claims that filemode
is not supported, then we will ignore the executable bit from the
filesystem. Previously we would have allowed it.
This adds an option to the new git_repository_reset_filesystem to
recurse through submodules if desired. There may be other types
of APIs that would like a "recurse submodules" option, but this
one is particularly useful.
This also has a number of cleanups, etc., for related things
including trying to give better error messages when problems come
up from the filesystem. For example, the FAT filesystem driver on
MacOS appears to return errno EINVAL if you attempt to write a
filename with invalid UTF-8 in it. We try to capture that with a
better error message now.
|
|
|
5173ea92
|
2013-10-04T16:32:16
|
|
Add git_repository_reset_filesystem and fix tests
When a repository is transferred from one file system to another,
many of the config settings that represent the properties of the
file system may be wrong. This adds a new public API that will
refresh the config settings of the repository to account for the
change of file system. This doesn't do a full "reinitialize" and
operates on a existing git_repository object refreshing the config
when done.
This commit then makes use of the new API in clar as each test
repository is set up.
This commit also has a number of other clar test fixes where we
were making assumptions about the type of filesystem, either based
on outdated config data or based on the OS instead of the FS.
|
|
|
840fb4fc
|
2013-10-03T14:42:37
|
|
Update repo init with fewer platform assumptions
The repo init code was assuming Windows == no filemode, and
Mac or Windows == no case sensitivity. Those assumptions are not
consistently true depending on the mounted file system. This is a
first step to removing those assumptions. It focuses on the repo
init code and the tests of that code. There are still many other
tests that are broken when those assumptions don't hold true, but
this clears up one area of the code.
Also, this moves the core.precomposeunicode logic to be closer to
the current logic in core Git where it will be set to true on any
filesystem where composed unicode is decomposed when read back.
|
|
|
af302aca
|
2013-10-02T14:13:11
|
|
Clean up annoying warnings
The indexer code was generating warnings on Windows 64-bit. I
looked closely at the logic and was able to simplify it a bit.
Also this fixes some other Windows and Linux warnings.
|
|
|
6b7991e2
|
2013-09-30T16:13:53
|
|
Add check if we need to precompose unicode on Mac
This adds initialization of core.precomposeunicode to repo init
on Mac. This is necessary because when a Mac accesses a repo on
a VFAT or SAMBA file system, it will return directory entries in
decomposed unicode even if the filesystem entry is precomposed.
This also removes caching of a number of repo properties from the
repo init pipeline because these are properties of the specific
filesystem on which the repo is created, not of the system as a
whole.
|
|
|
1ca3e49f
|
2013-09-23T13:34:01
|
|
Clean up newly introduced warnings
The attempt to "clean up warnings" seems to have introduced some
new warnings on compliant compilers. This fixes those in a way
that I suspect will also be okay for the non-compliant compilers.
Also this fixes what appears to be an extra semicolon in the
repo initialization template dir handling (and as part of that
fix, handles the case where an error occurs correctly).
|
|
|
417472e3
|
2013-09-20T09:02:58
|
|
Check error value from git_futils_find_template_dir
|
|
|
0cd1c3bb
|
2013-09-18T23:06:10
|
|
Make init.templatedir work
|
|
|
3d4f1698
|
2013-09-17T10:21:22
|
|
Merge pull request #1858 from linquize/win32-template-dir
Configurable template dir for Win32
|
|
|
4b11f25a
|
2013-09-11T16:38:33
|
|
Add ident filter
This adds the ident filter (that knows how to replace $Id$) and
tweaks the filter APIs and code so that git_filter_source objects
actually have the updated OID of the object being filtered when
it is a known value.
|
|
|
85d54812
|
2013-08-28T16:44:04
|
|
Create public filter object and use it
This creates include/sys/filter.h with a basic definition of a
git_filter and then converts the internal code to use it. There
are related internal objects (git_filter_list) that we will want
to publish at some point, but this is a first step.
|
|
|
a025907e
|
2013-09-17T23:55:11
|
|
Can load default template directory
|
|
|
605da51a
|
2013-09-17T09:50:30
|
|
No such thing as an orphan branch
Unfortunately git-core uses the term "unborn branch" and "orphan
branch" interchangeably. However, "orphan" is only really there for
the checkout command, which has the `--orphan` option so it doesn't
actually create the branch.
Branches never have parents, so the distinction of a branch with no
parents is odd to begin with. Crucially, the error messages deal with
unborn branches, so let's use that.
|