|
54fef6eb
|
2012-03-09T20:38:32
|
|
config: write out section headers with subsections correctly
write_section() mistakenly treated is input as the whole variable name
instead of simply the section (and possibly subsection) and would
confuse "section.subsection" as a section plus variable name and
produce a wrong section header.
Fix this and include a test for writing "section.subsection.var" and
reading it from the file.
|
|
854eccbb
|
2012-02-29T12:04:59
|
|
Clean up GIT_UNUSED macros on all platforms
It turns out that commit 31e9cfc4cbcaf1b38cdd3dbe3282a8f57e5366a5
did not fix the GIT_USUSED behavior on all platforms. This commit
walks through and really cleans things up more thoroughly, getting
rid of the unnecessary stuff.
To remove the use of some GIT_UNUSED, I ended up adding a couple
of new iterators for hashtables that allow you to iterator just
over keys or just over values.
In making this change, I found a bug in the clar tests (where we
were doing *count++ but meant to do (*count)++ to increment the
value). I fixed that but then found the test failing because it
was not really using an empty repo. So, I took some of the code
that I wrote for iterator testing and moved it to clar_helpers.c,
then made use of that to make it easier to open fixtures on a
per test basis even within a single test file.
|
|
13224ea4
|
2012-02-27T04:28:31
|
|
buffer: Unify `git_fbuffer` and `git_buf`
This makes so much sense that I can't believe it hasn't been done
before. Kill the old `git_fbuffer` and read files straight into
`git_buf` objects.
Also: In order to fully support 4GB files in 32-bit systems, the
`git_buf` implementation has been changed from using `ssize_t` for
storage and storing negative values on allocation failure, to using
`size_t` and changing the buffer pointer to a magical pointer on
allocation failure.
Hopefully this won't break anything.
|
|
|
0a43d7cb
|
2012-02-25T18:52:28
|
|
config: correctly deal with setting a multivar with regex where there are no matches
We used to erroneously consider "^$" as a special case for appending a
value to a multivar. This was a misunderstanding and we should always
append a value if there are no existing values that match.
While we're in the area, replace all the variables in-memory in one
swoop and then replace them on disk so as to avoid matching a value
we've just introduced.
|
|
|
3005855f
|
2012-02-05T00:29:26
|
|
Implement setting multivars
|
|
|
5e0dc4af
|
2012-02-04T23:18:30
|
|
Support getting multivars
|
|
|
0774d94d
|
2012-02-01T17:21:28
|
|
Store multivars in the multimap
|
|
|
fefd4551
|
2012-01-23T04:26:49
|
|
First round of config multimap changes
Move the configuration to use a multimap instead of a list. This
commit doesn't provide any functional changes but changes the support
structures.
|
|
5e0de328
|
2012-02-13T17:10:24
|
|
Update Copyright header
Signed-off-by: schu <schu-github@schulog.org>
|
|
|
15f52ae1
|
2011-12-19T15:59:13
|
|
config_file: fix clang sizeof-pointer-memaccess
|
|
|
a9fe8ae0
|
2012-01-23T22:14:04
|
|
config: don't use 'section "subsection"' internal form on config_set
This had been left over from a time when I believed what the git
documentation had to say about case-sensitivity. The rest of the code
doesn't recognize this form and we hadn't noticed because most tests
don't try to get a recently-set variable but free and reload the
configuration, causing the right format to be used.
|
|
|
c1c399cf
|
2012-01-13T19:33:54
|
|
config: handle EOF properly
In the main loop we peek to see what kind of line the next one is. If
there are multiple newlines before the end of the file, the eof marker
won't be set after we read the last line with data and we'll try to
peek again. This peek will return LF (as it pretends that we have a
newline at EOF so other function don't need any special handling).
Fix cfg_getchar so it doesn't try to read past the last character in
the file and config_parse so it considers LF as EOF on peek (as we're
ignoring spaces) and sets the reader's EOF flag to exit the parsing
loop.
|
|
|
9dd4c3e8
|
2011-12-31T05:56:39
|
|
config: Rename the `delete` callback name
`delete` is a reserved keyword in C++.
|
|
|
e95849c1
|
2011-12-16T11:39:21
|
|
config_file: honor error
Return an error if we can't write an updated version of the config file
after config_delete.
Along with that, fix an uninitialized warning.
Signed-off-by: schu <schu-github@schulog.org>
|
|
|
80a665aa
|
2011-12-16T02:28:39
|
|
config: really delete variables
Instead of just setting the value to NULL, which gives unwanted
results when asking for that variable after deleting it, delete the
variable from the list and re-write the file.
|
|
|
7b2b4adf
|
2011-12-16T01:39:28
|
|
Revert "config: Return ENOTFOUND when a variable was deleted"
This would make us think that config variables like
[core]
something
is missing.
|
|
|
2ea14da6
|
2011-12-15T18:14:41
|
|
config: Return ENOTFOUND when a variable was deleted
|
|
|
9462c471
|
2011-11-25T08:16:26
|
|
repository: Change ownership semantics
The ownership semantics have been changed all over the library to be
consistent. There are no more "borrowed" or duplicated references.
Main changes:
- `git_repository_open2` and `3` have been dropped.
- Added setters and getters to hotswap all the repository owned
objects:
`git_repository_index`
`git_repository_set_index`
`git_repository_odb`
`git_repository_set_odb`
`git_repository_config`
`git_repository_set_config`
`git_repository_workdir`
`git_repository_set_workdir`
Now working directories/index files/ODBs and so on can be
hot-swapped after creating a repository and between operations.
- All these objects now have proper ownership semantics with
refcounting: they all require freeing after they are no longer
needed (the repository always keeps its internal reference).
- Repository open and initialization has been updated to keep in
mind the configuration files. Bare repositories are now always
detected, and a default config file is created on init.
- All the tests affected by these changes have been dropped from the
old test suite and ported to the new one.
|
|
|
4e90a0a4
|
2011-11-26T01:54:12
|
|
config: allow to open and write to a new file
|
|
|
b762e576
|
2011-11-17T15:10:27
|
|
filebuf: add GIT_FILEBUF_INIT and protect multiple opens and cleanups
Update all stack allocations of git_filebuf to use GIT_FILEBUF_INIT
and make git_filebuf_open and git_filebuf_cleanup safe to be called
multiple times on the same buffer.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
89fb8f02
|
2011-10-28T19:04:23
|
|
Merge pull request #456 from brodie/perm-fixes
Create objects, indexes, and directories with the right file permissions
|
|
|
3286c408
|
2011-10-28T14:51:13
|
|
global: Properly use `git__` memory wrappers
Ensure that all memory related functions (malloc, calloc, strdup, free,
etc) are using their respective `git__` wrappers.
|
|
9f861826
|
2011-10-27T16:45:44
|
|
Fixed crash in config parser when empty value is encountered.
Example:
key1 = value1
key2 =
In this config the value will be a bad pointer which config object will attempt to free() causing a crash.
|
|
01ad7b3a
|
2011-09-06T15:48:45
|
|
*: correct and codify various file permissions
The following files now have 0444 permissions:
- loose objects
- pack indexes
- pack files
- packs downloaded by fetch
- packs downloaded by the HTTP transport
And the following files now have 0666 permissions:
- config files
- repository indexes
- reflogs
- refs
This brings libgit2 more in line with Git.
Note that git_filebuf_commit() and git_filebuf_commit_at() have both
gained a new mode parameter.
The latter change fixes an important issue where filebufs created with
GIT_FILEBUF_TEMPORARY received 0600 permissions (due to mkstemp(3)
usage). Now we chmod() the file before renaming it into place.
Tests have been added to confirm that new commit, tag, and tree
objects are created with the right permissions. I don't have access to
Windows, so for now I've guarded the tests with "#ifndef GIT_WIN32".
|
|
|
cd19ca95
|
2011-10-01T20:16:13
|
|
Squelch a couple of warnings
Signed-off-by: Carlos Martín Nieto <carlos@cmartin.tk>
|
|
|
9ac581bf
|
2011-10-01T19:56:04
|
|
config: behave like git with [section.subsection]
The documentation is a bit misleading. The subsection name is always
case-sensitive, but with a [section.subsection] header, the subsection
is transformed to lowercase when the configuration is parsed.
Signed-off-by: Carlos Martín Nieto <carlos@cmartin.tk>
|
|
|
71a4c1f1
|
2011-09-18T20:07:59
|
|
Merge pull request #384 from kiryl/warnings
Add more -W flags to CFLAGS
|
|
|
b6ed727a
|
2011-09-18T19:52:40
|
|
Merge pull request #392 from sschuberth/development
Fix a bug and GCC warning introduced in 932669b
|
|
|
87d9869f
|
2011-09-19T03:34:49
|
|
Tabify everything
There were quite a few places were spaces were being used instead of
tabs. Try to catch them all. This should hopefully not break anything.
Except for `git blame`. Oh well.
|
|
|
bb742ede
|
2011-09-19T01:54:32
|
|
Cleanup legal data
1. The license header is technically not valid if it doesn't have a
copyright signature.
2. The COPYING file has been updated with the different licenses used in
the project.
3. The full GPLv2 header in each file annoys me.
|
|
79a34396
|
2011-09-09T09:32:39
|
|
Fix a bug and GCC warning introduced in 932669b
For unsigned types, the comparison >= 0 is always true, so avoid it by using
a post-decrement and integrating the initial assigment into the loop body.
No change in behavior is intended.
|
|
|
45e93ef3
|
2011-09-08T14:22:29
|
|
Fix minor indentation issues (spaces to tabs)
|
|
|
26e74c6a
|
2011-09-08T14:21:17
|
|
Fix some random size_t vs. int conversion warnings
|
|
d568d585
|
2011-08-30T23:55:22
|
|
CMakefile: add -Wmissing-prototypes and fix warnings
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
|
|
|
932669b8
|
2011-08-25T14:22:57
|
|
Drop STRLEN() macros
There is no need in STRLEN macros. Compilers can do this trivial
optimization on its own.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
|
|
|
84dd3820
|
2011-08-18T02:13:51
|
|
posix: Properly handle `snprintf` in all platforms
|
|
|
5a0659fe
|
2011-08-17T14:05:41
|
|
config_file.c: fix memory leaks
Signed-off-by: schu <schu-github@schulog.org>
|
|
f58c53ce
|
2011-06-28T16:24:51
|
|
Correctly detect truncated input in header parsing
If the section header is the last line in the file,
parse_section_header would incorrectly decide that the input had been
truncated.
Fix this by checking whether the actual input line is correctly
formatted.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
|
6d4b6097
|
2011-06-28T15:20:42
|
|
Add git_config_del to delete a variable
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
|
f79026b4
|
2011-07-04T11:43:34
|
|
fileops: Cleanup
Cleaned up the structure of the whole OS-abstraction layer.
fileops.c now contains a set of utility methods for file management used
by the library. These are abstractions on top of the original POSIX
calls.
There's a new file called `posix.c` that contains
emulations/reimplementations of all the POSIX calls the library uses.
These are prefixed with `p_`. There's a specific posix file for each
platform (win32 and unix).
All the path-related methods have been moved from `utils.c` to `path.c`
and have their own prefix.
|
|
|
cfef5fb7
|
2011-06-29T15:09:21
|
|
config: `foreach` now returns variable values too
|
|
|
b76934de
|
2011-06-16T16:55:11
|
|
Remove double-space
Noticed by txdv
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
|
c716b187
|
2011-06-17T19:47:58
|
|
config: Fix unitialized variable warning
|
|
|
b2e361cc
|
2011-06-16T20:22:05
|
|
Plug two leaks in config writing
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
|
711b1096
|
2011-06-14T13:08:30
|
|
Indent config variables with tags
Confg variables are indended using tags and not four spaces as was
being done by the code.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
|
8bb198e6
|
2011-05-17T16:39:09
|
|
config: implement config writing
After each variable gets set, we store it in our list (not completely
in the right position, but the close enough). Then we write out the
new config file in the same way that git.git does it (keep the rest of
the file intact and insert or replace the variable in its line).
Overwriting variables and adding new ones is supported (even on new
sections), though deleting isn't yet.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
|
3b3577c7
|
2011-06-07T23:32:14
|
|
config: store new variables with the internal representation of the section
The section name should be stored in its case-sensitive variant when
we are adding a new variable. Use the internalize_section function to
do just that.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
|
5ab50417
|
2011-06-07T22:49:13
|
|
Remove an unfortunate optimisation from cvar_match_section
The (rather late) early-exit code, which provides a negligible
optimisation causes cvar_match_section to return false negatives when
it's called with a section name instead of a full variable name.
Remove this optimisation.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
|
c7e6e958
|
2011-05-31T17:44:55
|
|
Don't try to parse an empty config file
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
|
5892277c
|
2011-05-31T15:16:25
|
|
Config parse header ext: don't allow text after closing quote
Nothing is allowed betwen the closing quotation mark and the ] so
return an error if there is.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
|
7288d8b6
|
2011-05-31T15:11:49
|
|
Parse section header ext: don't leak on error
Also free the subsection if we find too many quotes
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
|
7bc9e2aa
|
2011-05-31T15:06:22
|
|
Guard against double-freeing the current section
If parse_section_header{,_ext} return an error, current_section
doesn't get allocated. Set it to NULL after freeing so we don't try to
free it again.
This fixes part 2-2 of Issue #210.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
|
f2abee47
|
2011-05-29T01:24:09
|
|
cfg_readline: really ignore empty lines
Simplify cfg_readline and at the same time fix it so that it does
really ignore empty lines.
This fixes point 2-1 of Issue #210
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
|
a5f43b95
|
2011-05-31T13:48:44
|
|
Config file open: don't free memory that doesn't belong to us
On error, it would free the configuration object even though it didn't
own that memory, which would cause a double-free.
This fixes the first part of Issue #210
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
3a1c4310
|
2011-05-24T18:55:35
|
|
Fix compilation warnings in MSVC
This allows to successfully build libgit2 with waf on Windows.
|
|
ec9edd56
|
2011-05-19T15:46:36
|
|
config_file.c: Move to new error handling mechanism
|
|
|
b0b527e0
|
2011-05-20T03:20:12
|
|
config: Cleanup & renaming of the external API
"git_config_backend" have been renamed to "git_config_file", which
implements a generic interface to access a configuration file -- be it
either on disk, from a DB or whatever mumbojumbo.
I think this makes more sense.
|
|
|
274f2c21
|
2011-05-19T14:18:57
|
|
Merge pull request #193 from carlosmn/config
A couple of config improvements
|
|
|
8133afef
|
2011-05-19T09:26:01
|
|
Fix a few minor typos in comments and error messages
Regarding "initialize" vs. "initialise", www.dict.cc says the first is American
English whereas the latter in British English. For consistency, we should
stick to American English.
|
|
|
765fdf4a
|
2011-05-18T17:19:38
|
|
Use "__inline" instead of "inline" with MSVC
MSVC supports "inline" only in C++ code, not in C code.
|
|
|
6421c49a
|
2011-05-17T18:55:52
|
|
Fix variable name normalization
When I changed it over to use different strings for the variable and
the name, cvar_name_normalize was left behind. Fix this and rename to
cvar_normalize_name to reflect the incompatible change.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
|
128d3731
|
2011-05-17T15:05:41
|
|
config_file: Fix compilation
|
|
|
29dca088
|
2011-05-17T13:38:19
|
|
Move config to the new error methods
Take this opportunity to fix an instance of returning
GIT_EOBJCORRUPTED when malloc failed.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
|
c0335005
|
2011-05-06T12:42:47
|
|
Move config to a backend structure
Configuration options can come from different sources. Currently,
there is only support for reading them from a flat file, but it might
make sense to read it from a database at some point.
Move the parsing code into src/config_file.c and create an include
file include/git2/config_backend.h to allow for other backends to be
developed.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|