|
e499b13c
|
2016-08-24T01:20:39
|
|
git_checkout_tree options fix
According to the reference the git_checkout_tree and git_checkout_head
functions should accept NULL in the opts field
This was broken since the opts field was dereferenced and thus lead to a
crash.
|
|
0dea4299
|
2016-08-12T09:06:15
|
|
ignore: allow unignoring basenames in subdirectories
The .gitignore file allows for patterns which unignore previous
ignore patterns. When unignoring a previous pattern, there are
basically three cases how this is matched when no globbing is
used:
1. when a previous file has been ignored, it can be unignored by
using its exact name, e.g.
foo/bar
!foo/bar
2. when a file in a subdirectory has been ignored, it can be
unignored by using its basename, e.g.
foo/bar
!bar
3. when all files with a basename are ignored, a specific file
can be unignored again by specifying its path in a
subdirectory, e.g.
bar
!foo/bar
The first problem in libgit2 is that we did not correctly treat
the second case. While we verified that the negative pattern
matches the tail of the positive one, we did not verify if it
only matches the basename of the positive pattern. So e.g. we
would have also negated a pattern like
foo/fruz_bar
!bar
Furthermore, we did not check for the third case, where a
basename is being unignored in a certain subdirectory again.
Both issues are fixed with this commit.
|
|
|
12b73ff3
|
2016-08-17T11:00:05
|
|
transports: http: reset `connected` flag when re-connecting transport
When calling `http_connect` on a subtransport whose stream is already
connected, we first close the stream in case no keep-alive is in use.
When doing so, we do not reset the transport's connection state,
though. Usually, this will do no harm in case the subsequent connect
will succeed. But when the connection fails we are left with a
substransport which is tagged as connected but which has no valid
stream attached.
Fix the issue by resetting the subtransport's connected-state when
closing its stream in `http_connect`.
|
|
|
8f342c6d
|
2016-08-08T14:47:32
|
|
stransport: do not use `git_stream_free` on uninitialized stransport
When failing to initialize a new stransport stream, we try to
release already allocated memory by calling out to
`git_stream_free`, which in turn called out to the stream's
`free` function pointer. As we only initialize the function
pointer later on, this leads to a `NULL` pointer exception.
Furthermore, plug another memory leak when failing to create the
SSL context.
|
|
|
9aee7bc2
|
2016-08-08T13:49:17
|
|
stransport: make internal functions static
|
|
1fafead5
|
2016-07-29T12:59:42
|
|
sysdir: use the standard `init` pattern
Don't try to determine when sysdirs are uninitialized. Instead, simply
initialize them all at `git_libgit2_init` time and never try to
reinitialize, except when consumers explicitly call `git_sysdir_set`.
Looking at the buffer length is especially problematic, since there may
no appropriate path for that value. (For example, the Windows-specific
programdata directory has no value on non-Windows machines.)
Previously we would continually trying to re-lookup these values,
which could get racy if two different threads are each calling
`git_sysdir_get` and trying to lookup / clear the value simultaneously.
|
|
|
85addddf
|
2016-08-04T13:45:28
|
|
refspec: do not set empty rhs for fetch refspecs
According to git-fetch(1), "[t]he colon can be omitted when <dst>
is empty." So according to git, the refspec "refs/heads/master"
is the same as the refspec "refs/heads/master:" when fetching
changes. When trying to fetch from a remote with a trailing
colon with libgit2, though, the fetch actually fails while it
works when the trailing colon is left out. So obviously, libgit2
does _not_ treat these two refspec formats the same for fetches.
The problem results from parsing refspecs, where the resulting
refspec has its destination set to an empty string in the case of
a trailing colon and to a `NULL` pointer in the case of no
trailing colon. When passing this to our DWIM machinery, the
empty string gets translated to "refs/heads/", which is simply
wrong.
Fix the problem by having the parsing machinery treat both cases
the same for fetch refspecs.
|
|
|
d711165d
|
2016-07-22T14:02:00
|
|
repository: don't cast to `int` for no reason
And give it a default so that some compilers don't (unnecessarily)
complain.
|
|
9894c7dd
|
2016-07-15T13:32:23
|
|
remote: Handle missing config values when deleting a remote
Somehow I ended up with the following in my ~/.gitconfig:
[branch "master"]
remote = origin
merge = master
rebase = true
I assume something went crazy while I was running the git.git tests
some time ago, and that I never noticed until now.
This is not a good configuration, but it shouldn't cause problems. But
it does. Specifically, if you have this in your config, and you
perform the following set of actions:
create a remote
fetch from that remote
create a branch off of the remote master branch called "master"
delete the branch
delete the remote
The remote delete fails with the message "Could not find key
'branch.master.rebase' to delete". This is because it's iterating over
the config entries (including the ones in the global config) and
believes that there is a master branch which must therefore have these
config keys.
https://github.com/libgit2/libgit2/issues/3856
|
|
|
49188d2b
|
2016-06-27T15:20:20
|
|
blame: do not decrement commit refcount in make_origin
When we create a blame origin, we try to look up the blob that is
to be blamed at a certain revision. When this lookup fails, e.g.
because the file did not exist at that certain revision, we fail
to create the blame origin and return `NULL`. The blame origin
that we have just allocated is thereby free'd with
`origin_decref`.
The `origin_decref` function does not only decrement reference
counts for the blame origin, though, but also for its commit and
blob. When this is done in the error case, we will cause an
uneven reference count for these objects. This may result in
hard-to-debug failures at seemingly unrelated code paths, where
we try to access these objects when they in fact have already
been free'd.
Fix the issue by refactoring `make_origin` such that we only
allocate the object after the only function that may fail so that
we do not have to call `origin_decref` at all. Also fix the
`pass_blame` function, which indirectly calls `make_origin`, to
free the commit when `make_origin` failed.
|
|
b64722fd
|
2016-08-05T18:40:37
|
|
SecureTransport: handle NULL trust on success
The `SSLCopyPeerTrust` call can succeed but fail to return a trust
object if it can't load the certificate chain and thus cannot check the
validity of a certificate. This can lead to us calling `CFRelease` on a
`NULL` trust object, causing a crash.
Handle this by returning ECERTIFICATE.
|
|
|
bb582f07
|
2016-06-20T20:07:33
|
|
threads: add platform-independent thread initialization function
|
|
1edbfa1f
|
2016-06-28T20:19:52
|
|
Fixed bug while parsing INT64_MIN
|
|
a200dc9e
|
2016-04-03T19:24:15
|
|
Fix repository discovery with ceiling_dirs at current directory
git only checks ceiling directories when its search ascends to a parent
directory. A ceiling directory matching the starting directory will not
prevent git from finding a repository in the starting directory or a
parent directory. libgit2 handled the former case correctly, but
differed from git in the latter case: given a ceiling directory matching
the starting directory, but no repository at the starting directory,
libgit2 would stop the search at that point rather than finding a
repository in a parent directory.
Test case using git command-line tools:
/tmp$ git init x
Initialized empty Git repository in /tmp/x/.git/
/tmp$ cd x/
/tmp/x$ mkdir subdir
/tmp/x$ cd subdir/
/tmp/x/subdir$ GIT_CEILING_DIRECTORIES=/tmp/x git rev-parse --git-dir
fatal: Not a git repository (or any of the parent directories): .git
/tmp/x/subdir$ GIT_CEILING_DIRECTORIES=/tmp/x/subdir git rev-parse --git-dir
/tmp/x/.git
Fix the testsuite to test this case (in one case fixing a test that
depended on the current behavior), and then fix find_repo to handle this
case correctly.
In the process, simplify and document the logic in find_repo():
- Separate the concepts of "currently checking a .git directory" and
"number of iterations left before going further counts as a search"
into two separate variables, in_dot_git and min_iterations.
- Move the logic to handle in_dot_git and append /.git to the top of the
loop.
- Only search ceiling_dirs and find ceiling_offset after running out of
min_iterations; since ceiling_offset only tracks the longest matching
ceiling directory, if ceiling_dirs contained both the current
directory and a parent directory, this change makes find_repo stop the
search at the parent directory.
|
|
|
5d03db81
|
2016-06-20T18:21:42
|
|
win32: rename pthread.{c,h} to thread.{c,h}
The old pthread-file did re-implement the pthreads API with exact symbol
matching. As the thread-abstraction has now been split up between Unix- and
Windows-specific files within the `git_` namespace to avoid symbol-clashes
between libgit2 and pthreads, the rewritten wrappers have nothing to do with
pthreads anymore.
Rename the Windows-specific pthread-files to honor this change.
|
|
|
961bdbdf
|
2016-06-20T18:28:00
|
|
threads: remove now-useless typedefs
|
|
|
2aa5c6ff
|
2016-06-20T19:40:45
|
|
threads: remove unused function pthread_num_processors_np
The function pthread_num_processors_np is currently unused and superseded by the
function `git_online_cpus`. Remove the function.
|
|
|
68343f26
|
2016-06-20T17:49:47
|
|
threads: split up OS-dependent rwlock code
|
|
|
fabd4771
|
2016-06-20T17:20:13
|
|
threads: split up OS-dependent thread-condition code
|
|
|
1b825316
|
2016-06-20T19:48:19
|
|
threads: remove unused function pthread_cond_broadcast
|
|
|
40b243bf
|
2016-06-20T17:07:14
|
|
threads: split up OS-dependent mutex code
|
|
|
fc2b97dd
|
2016-06-20T17:44:04
|
|
threads: split up OS-dependent thread code
|
|
286e7dbd
|
2016-06-09T22:50:53
|
|
fix error message SHA truncation in git_odb__error_notfound()
|
|
4c06f3e7
|
2016-06-19T11:46:43
|
|
HTTP authentication scheme name is case insensitive.
|
|
|
ac44d354
|
2016-06-15T15:47:28
|
|
checkout: use empty baseline when no index
When no index file exists and a baseline is not explicitly provided, use
an empty baseline instead of trying to load `HEAD`.
|
|
27008e84
|
2016-06-14T14:46:12
|
|
fetch: Fixed spurious update callback for existing tags.
|
|
|
d1fb89dd
|
2016-06-07T12:55:17
|
|
global: clean up crt only after freeing tls data
The thread local storage is used to hold some global state that
is dynamically allocated and should be freed upon exit. On
Windows, we clean up the C run-time right after execution of
registered shutdown callbacks and before cleaning up the TLS.
When we clean up the CRT, we also cause it to analyze for memory
leaks. As we did not free the TLS yet this will lead to false
positives.
Fix the issue by first freeing the TLS and cleaning up the CRT
only afterwards.
|
|
|
246d25b3
|
2016-06-07T08:35:26
|
|
index: fix NULL pointer access in index_remove_entry
When removing an entry from the index by its position, we first
retrieve the position from the index's entries and then try to
remove the retrieved value from the index map with
`DELETE_IN_MAP`. When `index_remove_entry` returns `NULL` we try
to feed it into the `DELETE_IN_MAP` macro, which will
unconditionally call `idxentry_hash` and then happily dereference
the `NULL` entry pointer.
Fix the issue by not passing a `NULL` entry into `DELETE_IN_MAP`.
|
|
|
1a709604
|
2016-06-06T12:59:17
|
|
transports: smart: fix potential invalid memory dereferences
When we receive a packet of exactly four bytes encoding its
length as those four bytes it can be treated as an empty line.
While it is not really specified how those empty lines should be
treated, we currently ignore them and do not return an error when
trying to parse it but simply advance the data pointer.
Callers invoking `git_pkt_parse_line` are currently not prepared
to handle this case as they do not explicitly check this case.
While they could always reset the passed out-pointer to `NULL`
before calling `git_pkt_parse_line` and determine if the pointer
has been set afterwards, it makes more sense to update
`git_pkt_parse_line` to set the out-pointer to `NULL` itself when
it encounters such an empty packet. Like this it is guaranteed
that there will be no invalid memory references to free'd
pointers.
As such, the issue has been fixed such that `git_pkt_parse_line`
always sets the packet out pointer to `NULL` when an empty packet
has been received and callers check for this condition, skipping
such packets.
|
|
|
11408f0e
|
2016-06-02T02:34:03
|
|
index_read_index: invalidate new paths in tree cache
When adding a new entry to an existing index via `git_index_read_index`,
be sure to remove the tree cache entry for that new path. This will
mark all parent trees as dirty.
|
|
|
80745b12
|
2016-06-02T01:04:58
|
|
index_read_index: set flags for path_len correctly
Update the flags to reset the path_len (to emulate `index_insert`)
|
|
|
e755f79f
|
2016-06-02T00:47:51
|
|
index_read_index: differentiate on mode
Treat index entries with different modes as different, which they
are, at least for the purposes of up-to-date calculations.
|
|
|
e6a0a850
|
2016-06-01T14:56:27
|
|
index_read_index: reset error correctly
Clear any error state upon each iteration. If one of the iterations
ends (with an error of `GIT_ITEROVER`) we need to reset that error to 0,
lest we stop the whole process prematurely.
|
|
|
feea2849
|
2016-05-26T12:52:29
|
|
win32: clean up unused warnings in DllMain
|
|
|
efadf28d
|
2016-05-26T12:39:09
|
|
filebuf: fix uninitialized warning
|
|
|
85ef6ec5
|
2016-05-12T13:18:07
|
|
Ignore submodules when checking for merge conflicts in the workdir.
|
|
|
70681ff7
|
2016-02-16T21:02:41
|
|
checkout: handle dirty submodules correctly
Don't generate conflicts when checking out a modified submodule and the
submodule is dirty or modified in the workdir.
|
|
78b5702e
|
2016-05-18T16:00:01
|
|
Fix comment for GIT_FILEMODE_LINK
0120000 is symbolic link, not commit
|
|
849a1a43
|
2016-05-05T23:34:23
|
|
Fix unused variable 'message' warning
|
|
|
cf0396a5
|
2016-05-02T16:49:59
|
|
delta-apply: fix sign extension
We compute offsets by executing `off |= (*delta++ << 24)` for
multiple constants, where `off` is of type `size_t` and `delta`
is of type `unsigned char`. The usual arithmetic conversions (see
ISO C89 §3.2.1.5 "Usual arithmetic conversions") kick in here,
causing us to promote both operands to `int` and then extending
the result to an `unsigned long` when OR'ing it with `off`.
The integer promotion to `int` may result in wrong size
calculations for big values.
Fix the issue by making the constants `unsigned long`, causing both
operands to be promoted to `unsigned long`.
|
|
|
1fb8a951
|
2016-05-02T16:24:14
|
|
odb_loose: fix undefined behavior when computing size
An object's size is computed by reading the object header's size
field until the most significant bit is not set anymore. To get
the total size, we increase the shift on each iteration and add
the shifted value to the total size.
We read the current value into a variable of type `unsigned
char`, from which we then take all bits except the most
significant bit and shift the result. We will end up with a
maximum shift of 60, but this exceeds the width of the value's
type, resulting in undefined behavior.
Fix the issue by instead reading the values into a variable of
type `unsigned long`, which matches the required width. This is
equivalent to git.git, which uses an `unsigned long` as well.
|
|
|
f627e196
|
2016-05-02T15:47:54
|
|
checkout: set ignorecase=0 when config lookup fails
When `git_repository__cvar` fails we may end up with a
`ignorecase` value of `-1`. As we subsequently check if
`ignorecase` is non-zero, we may end up reporting that data
should be removed when in fact it should not.
Err on the safer side and set `ignorecase = 0` when
`git_repository__cvar` fails.
|
|
|
66633e83
|
2016-04-27T12:00:31
|
|
odb: avoid inflating the full delta to read the header
When we read the header, we want to know the size and type of the
object. We're currently inflating the full delta in order to read the
first few bytes. This can mean hundreds of kB needlessly inflated for
large objects.
Instead use a packfile stream to read just enough so we can read the two
varints in the header and avoid inflating most of the delta.
|
|
|
fc2ef514
|
2016-05-02T14:30:14
|
|
index: fix memory leak on error case
|
|
b726c539
|
2016-04-26T18:04:03
|
|
Fix return value of openssl_read (infinite loop)
openssl_read should return -1 in case of error.
SSL_read returns values <= 0 in case of error.
A return value of 0 can lead to an infinite loop, so the return value
of ssl_set_error will be returned if SSL_read is not successful (analog
to openssl_write).
|
|
|
16541b86
|
2016-04-25T12:16:05
|
|
tag: ignore extra header fields
While no extra header fields are defined for tags, git accepts them by
ignoring them and continuing the search for the message. There are a few
tags like this in the wild which git parses just fine, so we should do
the same.
|
|
|
ccfacb8b
|
2016-03-31T10:43:57
|
|
leaks: call `xdl_free_classifier`
|
|
|
2c1bc36d
|
2016-03-29T14:47:31
|
|
Plug a few leaks
|
|
|
af753aba
|
2016-03-22T00:18:44
|
|
tree: drop the now-unnecessary entries vector
Remove the now-unnecessary entries vector. Add `git_array_search`
to binary search through an array to accomplish this.
|
|
|
13ebf7bd
|
2016-03-20T12:01:45
|
|
tree: store the entries in a growable array
Take advantage of the constant size of tree-owned arrays and store them
in an array instead of a pool. This still lets us free them all at once
but lets the system allocator do the work of fitting them in.
|
|
|
26f2cefb
|
2016-03-20T11:00:12
|
|
tree: re-use the id and filename in the odb object
Instead of copying over the data into the individual entries, point to
the originals, which are already in a format we can use.
|
|
|
17789083
|
2016-04-01T14:33:42
|
|
ignore: don't use realpath to canonicalize path
If we're looking for a symlink, realpath will give us the resolved path,
which is not what we're after, but a canonicalized version of the path
the user asked for.
|
|
|
a13c1ec2
|
2016-03-28T11:13:51
|
|
config: don't write section header if we're in it
If we hit the EOF while trying to write a new value, it may be that
we're already in the section that we were looking for. If so, do not
write a (duplicate) section header, just write the value.
|
|
|
3e2e8240
|
2016-04-11T17:43:07
|
|
refs: provide a more general error message for dwim
If we cannot dwim the input, set the error message to be explicit about
that. Otherwise we leave the error for the last failed lookup, which
can be rather unexpected as it mentions a remote when the user thought
they were trying to look up a branch.
|
|
|
56da07cb
|
2016-03-31T11:32:36
|
|
xdiff/xprepare: fix a memory leak
The xdl_prepare_env() function may initialise an xdlclassifier_t
data structure via xdl_init_classifier(), which allocates memory
to several fields, for example 'rchash', 'rcrecs' and 'ncha'.
If this function later exits due to the failure of xdl_optimize_ctxs(),
then this xdlclassifier_t structure, and the memory allocated to it,
is not cleaned up.
In order to fix the memory leak, insert a call to xdl_free_classifier()
before returning.
This patch was originally written by Ramsay Jones (see commit
87f16258367a3b9a62663b11f898a4a6f3c19d31 in git.git).
|
|
|
3ec0f2e3
|
2016-03-31T11:30:31
|
|
xdiff/xprepare: use the XDF_DIFF_ALG() macro to access flag bits
Commit 307ab20b3 ("xdiff: PATIENCE/HISTOGRAM are not independent option
bits", 19-02-2012) introduced the XDF_DIFF_ALG() macro to access the
flag bits used to represent the diff algorithm requested. In addition,
code which had used explicit manipulation of the flag bits was changed
to use the macros.
However, one example of direct manipulation remains. Update this code to
use the XDF_DIFF_ALG() macro.
This patch was originally written by Ramsay Jones (see commit
5cd6978a9cfef58de061a9525f3678ade479564d in git.git).
|
|
|
c86a65be
|
2016-03-21T21:10:26
|
|
config: don't special-case multivars that don't exist yet
This special-casing ignores that we might have a locked file, so the
hashtable does not represent the contents of the file we want to
write. This causes multivar writes to overwrite entries instead of add
to them when under lock.
There is no need for this as the normal code-path will write to the file
just fine, so simply get rid of it.
|
|
|
a1cf2644
|
2016-03-18T13:00:27
|
|
win32: free thread-local data on thread exit
|
|
e97d2d70
|
2016-03-17T10:45:22
|
|
commit: fix extraction of single-line signatures
The function to extract signatures suffers from a similar bug to the
header field finding one by having an unecessary line feed check as a
break condition of its loop.
Fix that and add a test for this single-line signature situation.
|
|
|
d8fcafb2
|
2016-03-16T19:05:11
|
|
Split the page size from the mmap alignment
While often similar, these are not the same on Windows. We want to use the page
size on Windows for the pools, but for mmap we need to use the allocation
granularity as the alignment.
On the other platforms these values remain the same.
|
|
4e91020c
|
2016-03-14T12:41:12
|
|
Start error string with lower case character
|
|
|
c1ec732f
|
2016-03-14T12:02:00
|
|
Setup better defaults for OpenSSL ciphers
This ensures that when using OpenSSL a safe default set of ciphers
is selected. This is done so that the client communicates securely
and we don't accidentally enable unsafe ciphers like RC4, or even
worse some old export ciphers.
Implements the first part of https://github.com/libgit2/libgit2/issues/3682
|
|
|
89e7604c
|
2016-03-10T17:21:02
|
|
config_cache: check return value of `git_config__lookup_entry`
Callers of `git_config__cvar` already handle the case where the
function returns an error due to a failed configuration variable
lookup, but we are actually swallowing errors when calling
`git_config__lookup_entry` inside of the function.
Fix this by returning early when `git_config__lookup_entry`
returns an error. As we call `git_config__lookup_entry` with
`no_errors == false` which leads us to call `get_entry` with
`GET_NO_MISSING` we will not return early when the lookup fails
due to a missing entry. Like this we are still able to set the
default value of the cvar and exit successfully.
|
|
|
18c4ae70
|
2016-03-10T17:05:30
|
|
filebuf: handle write error in `lock_file`
When writing to a file with locking not check if writing the
locked file actually succeeds. Fix the issue by returning error
code and message when writing fails.
|
|
|
f17ed637
|
2016-03-10T16:42:55
|
|
blame: handle error when resoling HEAD in normalize_options
When normalizing options we try to look up HEAD's OID. While this
action may fail in malformed repositories we never check the
return value of the function.
Fix the issue by converting `normalize_options` to actually
return an error and handle the error in `git_blame_file`.
|
|
|
dd78d7d1
|
2016-03-10T16:33:49
|
|
blame_git: handle error returned by `git_commit_parent`
|
|
|
8d3ee96a
|
2016-03-10T16:11:51
|
|
refdb_fs: fail if refcache returns NULL pointer
We usually check entries returned by `git_sortedcache_entry` for
NULL pointers. As we have a write lock in `packed_write`, though,
it really should not happen that the function returns NULL.
Assert that ref is not NULL to silence a Coverity warning.
|
|
|
851c51ab
|
2016-03-10T10:40:47
|
|
diff_tform: fix potential NULL pointer access
When the user passes in a diff which has no repository associated
we may call `git_config__get_int_force` with a NULL-pointer
configuration. Even though `git_config__get_int_force` is
designed to swallow errors, it is not intended to be called with
a NULL pointer configuration.
Fix the issue by only calling `git_config__get_int_force` only
when configuration could be retrieved from the repository.
|
|
|
d96c0638
|
2016-03-01T19:11:33
|
|
submodule: avoid passing NULL pointers to strncmp
In C89 it is undefined behavior to pass `NULL` pointers to
`strncmp` and later on in C99 it has been explicitly stated that
functions with an argument declared as `size_t nmemb` specifying
the array length shall always have valid parameters, no matter if
`nmemb` is 0 or not (see ISO 9899 §7.21.1.2).
The function `str_equal_no_trailing_slash` always passes its
parameters to `strncmp` if their lengths match. This means if one
parameter is `NULL` and the other one either `NULL` or a string
with length 0 we will pass the pointers to `strncmp` and cause
undefined behavior.
Fix this by explicitly handling the case when both lengths are 0.
|
|
|
1a16e8b0
|
2016-03-01T17:55:40
|
|
pack-objects: fix memory leak on overflow
|
|
|
e114bbac
|
2016-03-01T16:00:49
|
|
index: assert required OID are non-NULL
|
|
|
d0780b81
|
2016-03-01T15:35:45
|
|
object: avoid call of memset with ouf of bounds pointer
When computing a short OID we do this by first copying the
leading parts into the new OID structure and then setting the
trailing part to zero. In the case of the desired length being
`GIT_OID_HEXSZ - 1` we will call `memset` with an out of bounds
pointer and a length of 0. While this seems to cause no problems
for common platforms the C89 standard does not explicitly state
that calling `memset` with an out of bounds pointer and
length of 0 is valid.
Fix the potential issue by using the newly introduced
`git_oid__cpy_prefix` function.
|
|
|
fa4b93a6
|
2016-04-11T15:57:23
|
|
backport git_oid__cpy_prefix
|
|
|
e39ad747
|
2016-03-01T14:40:17
|
|
config_file: handle missing quotation marks in section header
When parsing a section header we expect something along the
format of '[section "subsection"]'. When a section is
mal-formated and is entirely missing its quotation marks we catch
this case by observing that `strchr(line, '"') - strrchr(line,
'"') = NULL - NULL = 0` and error out. Unfortunately, the error
message is misleading though, as we state that we are missing the
closing quotation mark while we in fact miss both quotation
marks.
Improve the error message by explicitly checking if the first
quotation mark could be found and, if not, stating that quotation
marks are completely missing.
|
|
|
ffb1f419
|
2016-03-01T14:24:09
|
|
describe: handle error code returned by git_pqueue_insert
|
|
|
4ebf745f
|
2016-03-09T11:16:16
|
|
mwindow: free unused windows if we fail to mmap
The first time may be due to memory fragmentation or just bad luck on a
32-bit system. When we hit the mmap error for the first time, free up
the unused windows and try again.
|
|
9ee498e8
|
2016-03-08T10:16:37
|
|
Only buffer if necessary.
|
|
|
eb09ead2
|
2016-03-04T01:18:30
|
|
odb: improved not found error messages
When looking up an abbreviated oid, show the actual (abbreviated) oid
the caller passed instead of a full (but ambiguously truncated) oid.
|
|
cdded630
|
2016-01-13T11:07:14
|
|
Remove duplicated calls to git_mwindow_close
|
|
|
e3862c9f
|
2016-01-11T17:09:32
|
|
Buffer sideband packet data
The inner packet may be split across multiple sideband packets.
|
|
8ec3d88f
|
2015-12-24T10:04:44
|
|
Avoid subtraction overflow in git_indexer_commit
|
|
4a93a7fc
|
2015-12-28T11:37:39
|
|
Tabs
|
|
|
e44f6586
|
2015-12-28T07:43:24
|
|
Removing #define for SSH_PREFIX_COUNT and using ARRAY_SIZE instead
Also moving var declarations to top of blocks to support bad old compilers
|
|
|
ff8e3f0e
|
2015-12-22T10:38:31
|
|
Handle git+ssh:// and ssh+git:// protocols support
|
|
|
ea5bf6bb
|
2016-03-04T12:34:38
|
|
treebuilder: don't try to verify submodules exist in the odb
Submodules don't exist in the objectdb and the code is making us try to
look for a blob with its commit id, which is obviously not going to
work.
Skip the test if the user wants to insert a submodule.
|
|
|
22f3d3aa
|
2016-03-03T22:26:31
|
|
ssh: initialize libssh2
We should have been doing this, but it initializes itself upon first
use, which works as long as nobody's doing concurrent network
operations. Initialize it on our init to make sure it's not getting
initialized concurrently.
|
|
|
66a530eb
|
2016-03-03T20:11:18
|
|
Merge pull request #3648 from libgit2/cmn/auth-retry
test: make sure we retry the auth callback on all platforms
|
|
|
778fb695
|
2016-03-03T12:14:02
|
|
Merge pull request #3646 from pks-t/pks/xdiff-fix-from-upstream
xdiff: fix memleak on error case
|
|
|
a4cba9d4
|
2016-03-03T10:48:24
|
|
winhttp: retry authentication
If the caller has provided bad authentication, give them another
apportunity to get it right until they give up. This brings WinHTTP in
line with the other transports.
|
|
|
edaffe22
|
2016-03-01T17:16:27
|
|
Merge pull request #3633 from ethomson/safe_creation
Stricter object dependency checking during creation
|
|
|
a4ea7faa
|
2016-03-01T08:54:00
|
|
xdiff: fix memleak on error case
Commit 3d1abc5afce fixes a memory leak in the xdiff code. In the
process of upstreaming the fix it was pointed out by Johannes
Schindelin that there is another memory leak present (see [1]).
Fix the second memory leak by applying the upstream fix to our
code base.
[1]: http://thread.gmane.org/gmane.comp.version-control.git/287034
|
|
|
dbee6835
|
2016-02-28T20:13:24
|
|
Merge pull request #3567 from sba1/few-p_getaddrinfo-fixes
Few p_getaddrinfo fixes
|
|
|
f2dddf52
|
2016-02-28T15:51:38
|
|
turn on strict object validation by default
|
|
|
98c34149
|
2016-02-28T15:11:15
|
|
refs: honor strict object creation
|
|
|
3ef01e77
|
2016-02-28T14:37:37
|
|
git_object__is_valid: use `odb_read_header`
This allows lighter weight validation in `git_object__is_valid` that
does not require reading the entire object.
|
|
|
6ddf533a
|
2016-02-23T18:29:16
|
|
git_index_add: validate objects in index entries (optionally)
When `GIT_OPT_ENABLE_STRICT_OBJECT_CREATION` is turned on, validate
the index entries given to `git_index_add`.
|
|
|
2bbc7d3e
|
2016-02-23T15:00:27
|
|
treebuilder: validate tree entries (optionally)
When `GIT_OPT_ENABLE_STRICT_OBJECT_CREATION` is turned on, validate
the tree and parent ids given to treebuilder insertion.
|
|
|
ef63bab3
|
2016-02-23T13:34:35
|
|
git_commit: validate tree and parent ids
When `GIT_OPT_ENABLE_STRICT_OBJECT_CREATION` is turned on, validate
the tree and parent ids given to commit creation functions.
|
|
|
7565dc65
|
2016-02-23T13:33:10
|
|
git_object__is_valid: simple object validity test
|
|
|
22a19f5b
|
2016-02-22T23:46:50
|
|
git_libgit2_opts: introduce `GIT_OPT_ENABLE_STRICT_OBJECT_CREATION`
|