kmx git

Commit	Date	Message
25f54f0f	2016-11-26T10:26:26	tap should default to disabled, not enabled
354a8f27	2016-11-26T10:26:22	SDL for Mac - only enable global event tap when actually necessary (app has focus and has requested relative mouse mode or has asked for a mouse grab). in other situations the event tap impacts system performance and battery life with no benefit.
ff56c7b3	2016-11-25T14:16:27	checker-buildbot.sh: Disable warnings that aren't explicitly static analysis.
d1c35feb	2016-11-25T00:13:13	macOS: removed deprecated UpdateSystemActivity() call. The non-deprecated approach (IOPMAssertion) already exists in SDL, and is available in Mac OS X 10.6 and later (although it was incorrectly listed as 10.7 and later in SDL). Since SDL now requires 10.6 or later, this is no longer conditionally used.
fb5fd67c	2016-11-24T21:41:09	Fixed all known static analysis bugs, with checker-279 on macOS.
fd250bd6	2016-11-24T21:13:23	checker-buildbot.sh: Upgraded to checker-279, deal with zero bugs detected.
2f6ba615	2016-11-24T12:24:22	Guess the USB VID/PID of XInput devices
e9983c7b	2016-11-24T11:53:23	We are comparing 16-bit values
e93e91f0	2016-11-23T21:52:48	Pacify some GCC strict-aliasing compiler warnings.
232ae688	2016-11-23T17:20:28	Still more compiler warning fixes for various platforms.
40c2a6fb	2016-11-23T11:49:26	Fixed more compiler warnings.
52827361	2016-11-23T10:51:44	directsound: fixed compiler warnings.
5232b8e9	2016-11-23T06:54:19	Fixed XBox One S controller mapping for firmware revision 3.1.1221.0, including back and guide buttons
aa03b9d7	2016-11-22T22:14:28	The XBox One S controller sends keys outside the standard joystick button range
6558ecdb	2016-11-22T04:42:07	Added mapping for XBox One S controller firmware version 3.1.1221.0
a949882a	2016-11-21T20:35:59	cpuinfo: fix SDL_HasNEON() on older iOS devices, fixed C++ comment.
36156335	2016-11-20T21:34:54	Renaming of guard header names to quiet -Wreserved-id-macro Patch contributed by Sylvain
abe92710	2016-11-20T21:29:27	Fixed warning building under mingw, patch contributed by Sylvain
c7351c2d	2016-11-20T21:26:56	Fixed a few warnings that show up with -Wdocumentation and -Wdocumentation-unknown-command, patch contributed by Sylvain
eaca3958	2016-11-20T21:24:09	Fixed bug 3494 - SDL_test_fuzzer.c fails compile since r10604 Ozkan Sezer As of hg rev. 10604 (http://hg.libsdl.org/SDL/rev/4fe01fd25855), SDL_test_fuzzer.c fails to build again
4a089ca1	2016-11-20T21:18:55	Fixed bug 3486 - Can't get HINSTANCE of my window realitix SDL2 allows to create widow and to get information through SDL_SysWMinfo. But it misses something, with Vulkan, you need the HWND and HINSTANCE of the window for Win32 system. Sadly, SDL2 provides only HWND but not HINSTANCE. In some context, it can be difficult to get the HINSTANCE, indeed, I'm using pySDL2 (Python) and I can only access properties that SDL2 gives me. I have to use a dirty trick like that to get the HINSTANCE: (https://raw.githubusercontent.com/bglgwyng/pyVulkan/master/examples/win32misc.py)
2a5fab63	2016-11-19T23:27:51	Updated configure script.
eb9cc030	2016-11-19T23:27:37	Fixed two memory leaks if added game controller mapping has lower priority. Found by buildbot.
a49ac09c	2016-11-18T00:06:09	Windows: Fixed crash if using current SDL_GetWindowWMInfo() from older programs.
d05a39d0	2016-11-18T00:05:54	Wayland: Fixed file descriptor leaks if device was not initialized.
c3451262	2016-11-18T00:05:28	Emscripten: Fixed handling of deactivated mouse events. SDL_GetEventState() was called with a button state instead of an event type.
32cb3494	2016-11-17T17:03:43	cpuinfo: patched to compile for getauxval() path.
0b33a118	2016-11-17T16:10:32	cpuinfo: more patching for Android. Legacy platform targets are a pain.
a298e563	2016-11-17T16:04:00	cpuinfo: Patched to compile on Android, Linux.
e8f4b7c4	2016-11-17T16:01:59	cpuinfo: patched to compile. Nothing quite like experimentation via Buildbot! :/
74eb78dc	2016-11-17T15:57:58	cpuinfo: more work on SDL_HasNEON().
db97c3d3	2016-11-17T01:41:56	cpuinfo: silence compiler warnings on non-Intel CPU architectures.
66a36d56	2016-11-17T01:34:18	cpuinfo: disable NEON detection on Android for now. Will fix this properly soon.
5c6b2ebf	2016-11-17T01:26:56	cpuinfo: more robust ARM preprocessor checks.
35430a73	2016-11-17T01:15:16	cpuinfo: first attempt at SDL_HasNEON() implementation.
7592b40b	2016-11-16T22:49:04	cpuinfo: Removed code duplication, cached CPUID details.
6fe15d63	2016-11-16T22:09:40	Wayland: Fixed memory leak if output retrieval failed. Found by Cppcheck.
97aa5775	2016-11-16T22:08:51	Fixed empty parameter list in signatures of internal functions.
818d1d3e	2016-11-15T01:30:08	Fixed bug 1646 - Warnings from clang with -Weverything
0d24495b	2016-11-15T01:24:58	Removed unused constants Except for SDL_bmp.c where they are historically interesting and I've left them in.
009a3f5a	2016-11-15T01:14:30	Fixed bug 3490 - Build failure with --enable-video-directfb felix Building SDL 2.0.5, or even the Mercurial snapshot (r10608) with GCC 6.2.1 and --enable-video-directfb generates a number of compiler diagnostics and fails.
ab8bd3d9	2016-11-15T01:12:27	Fixed bug 3359 - Software renderer does incorrect blending with SDL_RenderCopyEx Simon Hug The software renderer produces incorrect results when blending textures at an angle with certain blend modes. It seems that there were some edge cases that weren't considered when the SW_RenderCopyEx function was last changed. Or another bug possibly covered up the problem. (More on that in another bug report.) Most of the issues come from the fact that the rotating function sets a black colorkey. This is problematic because black is most likely appearing in the surface and the final blit will ignore these pixels. Unless a colorkey is already set (the software renderer currently never sets one), it's very hard to find a free color. Of course it could scan over the whole image until one is found, but that seems inefficient. The following blend modes have issues when drawn at an angle. NONE: The black pixels get ignored, making them essentially transparent. This breaks the 'dstRGBA = srcRGBA' definition of the NONE blend mode. MOD: Again, the black pixels get ignored. This also breaks the 'dstRGB = dstRGB * srcRGB' definition of the MOD blend mode, where black pixels would make the destination black as well. A white colorkey will work though, with some preparations. BLEND: There are some issues when blending a texture with a translucent RGBA target texture. I - uh - forgot what the problem here exactly is. This patch fixes the issues mentioned above. It mainly changes the code so it tries to do things without the colorkey and removes the automatic format conversion part from the SDLgfx_rotateSurface function. Getting the format right is something the caller has to do now and the required code has been added to the SW_RenderCopyEx function. There's a small change to the SW_CreateTexture function. RLE encoding a surface with an alpha mask can be a lossy process. Depending on how the user uses the RGBA channels, this may be undesired. The change that surfaces with an alpha mask don't get encoded makes the software renderer consistent with the other renderers. The SW_RenderCopyEx function now does these steps: Lock the source surface if necessary. Create a clone of the source by using the pixel buffer directly. Check the format and set a flag if a conversion is necessary. Check if scaling or cropping is necessary and set the flag for that as well. Check if color and alpha modulation has to be done before the rotate. Check if the source is an opaque surface. If not, it creates a mask surface that is necessary for the NONE blend mode. If any of the flags were set, a new surface is created and the source will be converted, scaled, cropped, and modulated. The rest of the function stays somewhat the same. The mask also needs to be rotated of course and then there is the NONE blend mode... It's surprisingly hard to get the pixel from a rotated surface to the destination buffer without affecting the pixel outside the rotated area. I found a way to do this with three blits which is pretty hard on the performance. Perhaps someone has an idea how to do this faster? As mentioned above, the SDLgfx_rotateSurface now only takes 8-bit paletted or 32-bit with alpha mask surfaces. It additionally sets the new surfaces up for the MOD blend mode. I shortly tested the 8-bit path of SDLgfx_rotateSurface and it seemed to work so far. This path is not used by the software renderer anyway.
c1e292fc	2016-11-13T23:09:42	Fixed build error with missing function prototype in the SDL_test_harness.h header
c2837ef6	2016-11-13T23:04:47	Fixed unresolved symbol on Visual Studio
57d01d7d	2016-11-13T22:57:41	Patch from Sylvain to fix clang warnings
acce8659	2016-11-13T10:39:04	[qtwayland] Set orientation and window flags via SDL hints
c13a077d	2016-11-13T00:09:02	Fixed bug 3488 - Random crashes (because Memory overlap in audio converters detected by Valgrind) Vitaly Novichkov Okay, when I researched code and algorithm, I tried to replace condition "while(dst >= target)" with "while(dst > target)" and crashes are gone. Seems on some moments it tries to write into the place before memory block begin, therefore phantom crashes appearing after some moments.
37696150	2016-11-11T13:47:40	Fixed build on various platforms
77000ff8	2016-11-11T13:38:39	Fixed bug 1822 - Inconsistent renderer behaviour on rotation Sylvain 2016-11-07 08:49:34 UTC when rotated +90 or -90, some transparent lines appears, though there is no Alpha or ColorKey. if you set a dummy colorkey, it will remove the line ... if you set a some alpha mod, the +90/-90 get transparent but not the 0/180 ...
23c01c18	2016-11-11T13:29:23	Fixed bug 3079 - Allow non destructive SDL_GameControllerAddMappingsFromFile x414e54 It is a bit of a pain to update the library or rely on whatever version the user has on their computer for default mappings. So providing an easily updatable text file via SDL_GameControllerAddMappingsFromFile is still currently the most viable way. However using this replaces all mappings provided by the SDL_HINT_GAMECONTROLLERCONFIG environment variable which may have come from the user's custom Steam mapping. There should be an easy way for games to supply extra game controller mappings to fill in the differences between SDL versions without it clobbering the SDL_HINT_GAMECONTROLLERCONFIG environment variable. Internally the mappings could use a priority system and if the priority is lower then it will not overwrite the mappings. For now it just assumes SDL_HINT_GAMECONTROLLERCONFIG is the highest priority, the default hardcoded are the lowest and anything set via the API is medium.
74e1dd4c	2016-11-11T13:14:00	Define _GNU_SOURCE when building SDL
302a6e62	2016-11-11T12:41:06	Fixed bug 3484 - DSP driver does not detect /dev/dsp0 Tobias Kortkamp using SDL 2.0.5 (and a repository checkout) on FreeBSD 11.0 I get this output from testaudioinfo with SDL_AUDIODRIVER=dsp: INFO: Found 8 output devices: INFO: 0: /dev/dsp INFO: 1: /dev/dsp1 INFO: 2: /dev/dsp2 INFO: 3: /dev/dsp3 INFO: 4: /dev/dsp4 INFO: 5: /dev/dsp5 INFO: 6: /dev/dsp6 INFO: 7: /dev/dsp7 INFO: INFO: Found 3 capture devices: INFO: 0: /dev/dsp INFO: 1: /dev/dsp4 INFO: 2: /dev/dsp5 INFO: This is /dev/sndstat: Installed devices: pcm0: <NVIDIA (0x0040) (HDMI/DP 8ch)> (play) pcm1: <NVIDIA (0x0040) (HDMI/DP 8ch)> (play) pcm2: <NVIDIA (0x0040) (HDMI/DP 8ch)> (play) pcm3: <NVIDIA (0x0040) (HDMI/DP 8ch)> (play) pcm4: <Realtek ALC887 (Rear Analog 7.1/2.0)> (play/rec) pcm5: <Realtek ALC887 (Front Analog)> (play/rec) default pcm6: <Realtek ALC887 (Rear Digital)> (play) pcm7: <Realtek ALC887 (Onboard Digital)> (play) No devices installed from userspace. I'd expect to find /dev/dsp0 in the output device list. It's not detected because of a a small logic error in SDL_audiodev.c (see attached patch). With the patch applied I get this which is what I'd expect: INFO: Found 9 output devices: INFO: 0: /dev/dsp INFO: 1: /dev/dsp0 INFO: 2: /dev/dsp1 INFO: 3: /dev/dsp2 INFO: 4: /dev/dsp3 INFO: 5: /dev/dsp4 INFO: 6: /dev/dsp5 INFO: 7: /dev/dsp6 INFO: 8: /dev/dsp7
160e7194	2016-11-11T04:35:06	Fixed whitespace and added code to support older game controller GUIDs
b6542ab2	2016-11-11T04:30:09	Fixed whitespace
47418f2d	2016-11-11T03:35:37	Updated Windows game controller support
79f6ba5a	2016-11-11T03:18:16	Fixed signed/unsigned comparison warnings in Visual Studio
801a9eaf	2016-11-11T04:06:00	Updated Mac OS X game controller support
c406f649	2016-11-10T18:53:50	Added USB VID/PID information to the SDL test programs
0cc6207c	2016-11-10T18:53:29	Added Linux entries for the Logitech Dual Action game controller
ac74e16c	2016-11-10T17:19:34	Standardized the format of the SDL joystick GUID and added functions to retrieve the USB VID/PID from a joystick and game controller.
2898ada3	2016-11-10T12:07:34	wayland: fixed compiler warning about pipe2().
0a294a7b	2016-11-10T11:26:44	nacl: pepper_49 SDK apparently has problems, move buildbot back to pepper_47. (this is still a big leap forward from the previous buildbot target of pepper_35!)
920bc237	2016-11-08T01:12:54	Upgraded buildbot to NaCL SDK pepper_49 (the current stable release).
6380d5c2	2016-11-07T21:10:01	Fixed audio conversion for unsigned 16 bit data.
37d991d7	2016-11-06T20:26:48	Fixed bug 3481 - Configure fails to detect dynamic library support on powerpc64le Sam I've discovered that when building on powerpc64le (and probably powerpc64) SDL's configure script fails to detect dynamic library support, causing it to build a static library. This causes link failures due to undefined symbols later when packages link with -lSDL. This seems to be because the included autotools package is too old to detect powerpc64le. This change corrects the problem for me but newer versions of autotools should handle it without a patch
057bca8a	2016-11-06T15:15:32	Better fix for last point in D3D11 renderer, thanks to Nader Golbaz
0396af65	2016-11-06T14:13:28	Shifting a value by more than its bits isn't defined and has varying behavior depending on compiler and platform
40b571c9	2016-11-06T10:01:08	Fixed bug 3468 - _allshr in SDL_stdlib.c is not working properly Mark Pizzolato On Windows with Visual Studio, when building SDL as a static library using the x86 (32bit) mode, several intrinsic operations are implemented in code in SDL_stdlib.c. One of these, _allshr() is not properly implemented and fails for some input. As a result, some operations on 64bit data elements (long long) don't always work. I classified this bug as a blocker since things absolutely don't work when the affected code is invoked. The affected code is only invoked when SDL is compiled in x86 mode on Visual Studio when building a SDL as a static library. This build environment isn't common, and hence the bug hasn't been noticed previously. I reopened #2537 and mentioned this problem and provided a fix. That fix is provided again here along with test code which could be added to some of the SDL test code. This test code verifies that the x86 intrinsic routines produce the same results as the native x64 instructions which these routines emulate under the Microsoft compiler. The point of the tests is to make sure that Visual Studio x86 code produces the same results as Visual Studio x64 code. Some of the arguments (or boundary conditions) may produce different results on other compiler environments, so the tests really shouldn't be run on all compilers. The test driver only actually exercised code when the compiler defines _MSC_VER, so the driver can generically be invoked without issue.
d7800312	2016-11-06T09:30:06	Fixed bug 3476 - round() needs _GNU_SOURCE on some old systems Ozkan Sezer On systems with old glibc, such mine with glibc-2.8, the following warning is issued and is fixed easily by defining _GNU_SOURCE: /home/me/SDL2-2.0.5/src/video/x11/SDL_x11modes.c: In function 'CalculateXRandRRefreshRate': /home/me/SDL2-2.0.5/src/video/x11/SDL_x11modes.c:263: warning: implicit declaration of function 'round' /home/me/SDL2-2.0.5/src/video/x11/SDL_x11modes.c:263: warning: incompatible implicit declaration of built-in function 'round'
330e2952	2016-11-06T08:47:40	Fixed bug 2421 for D3D11 - SDL_RenderCopyEx off by one when rotating by 90 and -90. Nader Golbaz Updated patch for direct3d renderers
4ed4997c	2016-11-06T08:42:46	Fixed bug 2421 for D3D9 - SDL_RenderCopyEx off by one when rotating by 90 and -90 Nader Golbaz Updated patch for direct3d renderers
d767a450	2016-11-06T08:34:27	Fixed 2942 - Wayland: Drag and Drop / Clipboard x414e54 I have implemented Drag and Drop and Clipboard support for Wayland. Drag and dropping files from nautilus to the testdropfile application seems to work and also copy and paste.
7ad3a46d	2016-11-05T21:23:17	ALSA: Fixed compile warning about unused function. Found by buildbot.
58199232	2016-11-05T21:22:58	WinRT: Corrected header file guard comment.
062ca2b2	2016-11-05T21:22:39	Removed empty statement.
6ed82130	2016-11-05T01:52:28	Fixed Windows build
52988309	2016-11-05T01:48:14	Fixed bug 3480 - minor update to NACL common.js Sylvain All latest official NACL examples have a slightly different 'common.js' file. It seems it has been updated in the meantime to fix a bug.
a17abf10	2016-11-05T03:56:55	Also patched to compile on C89 compilers.
067f0c84	2016-11-05T03:53:59	Patched to compile on C89 compilers.
f3456e9a	2016-11-05T02:34:38	Reworked audio converter code. This no longer uses a script to generate code for every possible type conversion or resampler. This caused a bloat in binary size and and compile times. Now we use a handful of more generic functions and assume staying in the CPU cache is the most important thing anyhow. This shrinks the size of the final build (in this case: macOS X amd64, -Os to optimize for size) by 15%. When compiling on a single core, build times drop by about 15% too (although the previous cost was largely hidden by multicore builds).
7e65d88f	2016-11-03T11:10:52	Removed premake build system.
0f83ae0f	2016-11-03T01:29:56	Added some debug logging to print out every event added to the SDL queue.
baadd546	2016-11-02T02:56:54	Fixed text input events with UIM Alex Baines I realized overnight that my patch probably broke text input events with UIM, and I confirmed that it does. Can't believe I overlooked that... I've been making stupid mistakes in these patches recently, sorry. Anyway, this one seems to fix it properly. Knowing my luck it probably breaks something else.
acae3ebf	2016-11-02T02:50:27	Added mapping for the PS3 controller in Bluetooth mode
d0c8bf7f	2016-11-01T10:48:59	Patch from Tapani P?lli to fix a memory leak in X11_InitKeyboard Patch uses XkbFreeKeyboard to free the memory returned by XkbGetMap. Earlier implementation called XkbFreeClientMap which frees all the maps but not data->xkb structure itself, XkbFreeKeyboard will free maps and the structure.
a1f42765	2016-11-01T10:46:47	Patch from Tapani P?lli to fix a memory leak in X11_GL_CreateContext
077d6e64	2016-11-01T10:42:35	Fixed bug with udev support reporting Joshua Bodine I'm going to reopen this because configure should still accurately report whether libudev will be used. Right now it just tests whether it's enabled as an argument, not whether configure was successful in finding it.
8eb76276	2016-11-01T17:38:05	Skip duplicate key events sent by IMEs like uim.
539afc5d	2016-11-01T10:33:44	Fixed bug 3473 - can't build on linux with an old kernel
9a8642bd	2016-11-01T10:30:46	Fixed bug 3478 - Patch Haiku to use dlopen instead of load_add_on Kai Sterker SDL2 on Haiku so far uses Haiku-specific APIs for loading dynamic objects as add-ons, instead of using dlopen to load them as libraries. This, for example, leads to SDL_mixer not being able to load its audio backends, when compiled with standard settings. As discussed at https://www.freelists.org/post/haikuports/SDL2-mixer-ogg-music-not-playing-and-other-stuff,2 , the best way to deal with this would be using dlopen instead of load_add_on. The following patch implements this change by dropping the Haiku-specific bits and using dlopen instead.
98d188f5	2016-10-30T21:01:46	Added call to SDL_HasAVX2() in platform test program.
6f1f77b2	2016-10-30T21:01:33	Fixed outdated info in README.
88f2d16e	2016-10-28T17:00:37	Fixed compiling on older versions of ALSA
fdcac1c2	2016-10-28T16:47:06	Fixed audio data swizzling when the device channel map already matches what SDL expects
5fe98497	2016-10-28T01:28:58	Fix double events / no repeat flag on key events when built withoutibus/fcitx Uses XkbSetDetectableKeyRepeat, and falls back to forcing @im=none if it's not supported.
39ba2ab8	2016-10-22T17:53:03	Fixed NULL pointer dereference, thanks Ozkan Sezer
5b14a943	2016-10-22T11:01:55	Fixed bug 3466 - Can't build 2.0.5 on ppc64 /home/fedora/SDL2-2.0.5/src/video/SDL_blit_N.c: In function 'calc_swizzle32': /home/fedora/SDL2-2.0.5/src/video/SDL_blit_N.c:127:5: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement] const vector unsigned char plus = VECUINT8_LITERAL(0x00, 0x00, 0x00, 0x00, ^
ebf07eb0	2016-10-19T21:22:42	Added tag release-2.0.5 for changeset 38318a3ae49a
54eb9067	2016-10-19T20:50:33	Fixed bug 3460 - docs/README-macosx.md: g++fat.sh should be g++-fat.sh in universal build command Elis?e Maurer I scratched my head for a while until I realized there's a typo in the command listed in the instructions for universal Mac builds: https://hg.libsdl.org/SDL/file/3a3a88db1fc2/docs/README-macosx.md#l24 It should say `g++-fat.sh` but instead it says `g++fat.sh`, which makes `./configure` fail with a C++ preprocessor error.
8a73f7e8	2016-10-19T20:42:22	Fixed bug 3461 - Implement TEXTINPUT events for Haiku Kai Sterker Apparently, SDL2 on Haiku does not generate SDL_TEXTINPUT events. Attached is a patch that adds this functionality. Tested with SDLs own checkkeys program and different keymaps as well as my own SDL application and German keyboard layout to verify it generates the expected input.

25f54f0f

2016-11-26T10:26:26

tap should default to disabled, not enabled

354a8f27

2016-11-26T10:26:22

SDL for Mac - only enable global event tap when actually necessary (app has focus and has requested relative mouse mode or has asked for a mouse grab). in other situations the event tap impacts system performance and battery life with no benefit.

ff56c7b3

2016-11-25T14:16:27

checker-buildbot.sh: Disable warnings that aren't explicitly static analysis.

d1c35feb

2016-11-25T00:13:13

macOS: removed deprecated UpdateSystemActivity() call. The non-deprecated approach (IOPMAssertion) already exists in SDL, and is available in Mac OS X 10.6 and later (although it was incorrectly listed as 10.7 and later in SDL). Since SDL now requires 10.6 or later, this is no longer conditionally used.

fb5fd67c

2016-11-24T21:41:09

Fixed all known static analysis bugs, with checker-279 on macOS.

fd250bd6

2016-11-24T21:13:23

checker-buildbot.sh: Upgraded to checker-279, deal with zero bugs detected.

2f6ba615

2016-11-24T12:24:22

Guess the USB VID/PID of XInput devices

e9983c7b

2016-11-24T11:53:23

We are comparing 16-bit values

e93e91f0

2016-11-23T21:52:48

Pacify some GCC strict-aliasing compiler warnings.

232ae688

2016-11-23T17:20:28

Still more compiler warning fixes for various platforms.

40c2a6fb

2016-11-23T11:49:26

Fixed more compiler warnings.

52827361

2016-11-23T10:51:44

directsound: fixed compiler warnings.

5232b8e9

2016-11-23T06:54:19

Fixed XBox One S controller mapping for firmware revision 3.1.1221.0, including back and guide buttons

aa03b9d7

2016-11-22T22:14:28

The XBox One S controller sends keys outside the standard joystick button range

6558ecdb

2016-11-22T04:42:07

Added mapping for XBox One S controller firmware version 3.1.1221.0

a949882a

2016-11-21T20:35:59

cpuinfo: fix SDL_HasNEON() on older iOS devices, fixed C++ comment.

36156335

2016-11-20T21:34:54

Renaming of guard header names to quiet -Wreserved-id-macro Patch contributed by Sylvain

abe92710

2016-11-20T21:29:27

Fixed warning building under mingw, patch contributed by Sylvain

c7351c2d

2016-11-20T21:26:56

Fixed a few warnings that show up with -Wdocumentation and -Wdocumentation-unknown-command, patch contributed by Sylvain

eaca3958

2016-11-20T21:24:09

Fixed bug 3494 - SDL_test_fuzzer.c fails compile since r10604 Ozkan Sezer As of hg rev. 10604 (http://hg.libsdl.org/SDL/rev/4fe01fd25855), SDL_test_fuzzer.c fails to build again

4a089ca1

2016-11-20T21:18:55

Fixed bug 3486 - Can't get HINSTANCE of my window realitix SDL2 allows to create widow and to get information through SDL_SysWMinfo. But it misses something, with Vulkan, you need the HWND and HINSTANCE of the window for Win32 system. Sadly, SDL2 provides only HWND but not HINSTANCE. In some context, it can be difficult to get the HINSTANCE, indeed, I'm using pySDL2 (Python) and I can only access properties that SDL2 gives me. I have to use a dirty trick like that to get the HINSTANCE: (https://raw.githubusercontent.com/bglgwyng/pyVulkan/master/examples/win32misc.py)

2a5fab63

2016-11-19T23:27:51

Updated configure script.

eb9cc030

2016-11-19T23:27:37

Fixed two memory leaks if added game controller mapping has lower priority. Found by buildbot.

a49ac09c

2016-11-18T00:06:09

Windows: Fixed crash if using current SDL_GetWindowWMInfo() from older programs.

d05a39d0

2016-11-18T00:05:54

Wayland: Fixed file descriptor leaks if device was not initialized.

c3451262

2016-11-18T00:05:28

Emscripten: Fixed handling of deactivated mouse events. SDL_GetEventState() was called with a button state instead of an event type.

32cb3494

2016-11-17T17:03:43

cpuinfo: patched to compile for getauxval() path.

0b33a118

2016-11-17T16:10:32

cpuinfo: more patching for Android. Legacy platform targets are a pain.

a298e563

2016-11-17T16:04:00

cpuinfo: Patched to compile on Android, Linux.

e8f4b7c4

2016-11-17T16:01:59

cpuinfo: patched to compile. Nothing quite like experimentation via Buildbot! :/

74eb78dc

2016-11-17T15:57:58

cpuinfo: more work on SDL_HasNEON().

db97c3d3

2016-11-17T01:41:56

cpuinfo: silence compiler warnings on non-Intel CPU architectures.

66a36d56

2016-11-17T01:34:18

cpuinfo: disable NEON detection on Android for now. Will fix this properly soon.

5c6b2ebf

2016-11-17T01:26:56

cpuinfo: more robust ARM preprocessor checks.

35430a73

2016-11-17T01:15:16

cpuinfo: first attempt at SDL_HasNEON() implementation.

7592b40b

2016-11-16T22:49:04

cpuinfo: Removed code duplication, cached CPUID details.

6fe15d63

2016-11-16T22:09:40

Wayland: Fixed memory leak if output retrieval failed. Found by Cppcheck.

97aa5775

2016-11-16T22:08:51

Fixed empty parameter list in signatures of internal functions.

818d1d3e

2016-11-15T01:30:08

Fixed bug 1646 - Warnings from clang with -Weverything

0d24495b

2016-11-15T01:24:58

Removed unused constants Except for SDL_bmp.c where they are historically interesting and I've left them in.

009a3f5a

2016-11-15T01:14:30

Fixed bug 3490 - Build failure with --enable-video-directfb felix Building SDL 2.0.5, or even the Mercurial snapshot (r10608) with GCC 6.2.1 and --enable-video-directfb generates a number of compiler diagnostics and fails.

ab8bd3d9

2016-11-15T01:12:27

Fixed bug 3359 - Software renderer does incorrect blending with SDL_RenderCopyEx Simon Hug The software renderer produces incorrect results when blending textures at an angle with certain blend modes. It seems that there were some edge cases that weren't considered when the SW_RenderCopyEx function was last changed. Or another bug possibly covered up the problem. (More on that in another bug report.) Most of the issues come from the fact that the rotating function sets a black colorkey. This is problematic because black is most likely appearing in the surface and the final blit will ignore these pixels. Unless a colorkey is already set (the software renderer currently never sets one), it's very hard to find a free color. Of course it could scan over the whole image until one is found, but that seems inefficient. The following blend modes have issues when drawn at an angle. NONE: The black pixels get ignored, making them essentially transparent. This breaks the 'dstRGBA = srcRGBA' definition of the NONE blend mode. MOD: Again, the black pixels get ignored. This also breaks the 'dstRGB = dstRGB * srcRGB' definition of the MOD blend mode, where black pixels would make the destination black as well. A white colorkey will work though, with some preparations. BLEND: There are some issues when blending a texture with a translucent RGBA target texture. I - uh - forgot what the problem here exactly is. This patch fixes the issues mentioned above. It mainly changes the code so it tries to do things without the colorkey and removes the automatic format conversion part from the SDLgfx_rotateSurface function. Getting the format right is something the caller has to do now and the required code has been added to the SW_RenderCopyEx function. There's a small change to the SW_CreateTexture function. RLE encoding a surface with an alpha mask can be a lossy process. Depending on how the user uses the RGBA channels, this may be undesired. The change that surfaces with an alpha mask don't get encoded makes the software renderer consistent with the other renderers. The SW_RenderCopyEx function now does these steps: Lock the source surface if necessary. Create a clone of the source by using the pixel buffer directly. Check the format and set a flag if a conversion is necessary. Check if scaling or cropping is necessary and set the flag for that as well. Check if color and alpha modulation has to be done before the rotate. Check if the source is an opaque surface. If not, it creates a mask surface that is necessary for the NONE blend mode. If any of the flags were set, a new surface is created and the source will be converted, scaled, cropped, and modulated. The rest of the function stays somewhat the same. The mask also needs to be rotated of course and then there is the NONE blend mode... It's surprisingly hard to get the pixel from a rotated surface to the destination buffer without affecting the pixel outside the rotated area. I found a way to do this with three blits which is pretty hard on the performance. Perhaps someone has an idea how to do this faster? As mentioned above, the SDLgfx_rotateSurface now only takes 8-bit paletted or 32-bit with alpha mask surfaces. It additionally sets the new surfaces up for the MOD blend mode. I shortly tested the 8-bit path of SDLgfx_rotateSurface and it seemed to work so far. This path is not used by the software renderer anyway.

c1e292fc

2016-11-13T23:09:42

Fixed build error with missing function prototype in the SDL_test_harness.h header

c2837ef6

2016-11-13T23:04:47

Fixed unresolved symbol on Visual Studio

57d01d7d

2016-11-13T22:57:41

Patch from Sylvain to fix clang warnings

acce8659

2016-11-13T10:39:04

[qtwayland] Set orientation and window flags via SDL hints

c13a077d

2016-11-13T00:09:02

Fixed bug 3488 - Random crashes (because Memory overlap in audio converters detected by Valgrind) Vitaly Novichkov Okay, when I researched code and algorithm, I tried to replace condition "while(dst >= target)" with "while(dst > target)" and crashes are gone. Seems on some moments it tries to write into the place before memory block begin, therefore phantom crashes appearing after some moments.

37696150

2016-11-11T13:47:40

Fixed build on various platforms

77000ff8

2016-11-11T13:38:39

Fixed bug 1822 - Inconsistent renderer behaviour on rotation Sylvain 2016-11-07 08:49:34 UTC when rotated +90 or -90, some transparent lines appears, though there is no Alpha or ColorKey. if you set a dummy colorkey, it will remove the line ... if you set a some alpha mod, the +90/-90 get transparent but not the 0/180 ...

23c01c18

2016-11-11T13:29:23

Fixed bug 3079 - Allow non destructive SDL_GameControllerAddMappingsFromFile x414e54 It is a bit of a pain to update the library or rely on whatever version the user has on their computer for default mappings. So providing an easily updatable text file via SDL_GameControllerAddMappingsFromFile is still currently the most viable way. However using this replaces all mappings provided by the SDL_HINT_GAMECONTROLLERCONFIG environment variable which may have come from the user's custom Steam mapping. There should be an easy way for games to supply extra game controller mappings to fill in the differences between SDL versions without it clobbering the SDL_HINT_GAMECONTROLLERCONFIG environment variable. Internally the mappings could use a priority system and if the priority is lower then it will not overwrite the mappings. For now it just assumes SDL_HINT_GAMECONTROLLERCONFIG is the highest priority, the default hardcoded are the lowest and anything set via the API is medium.

74e1dd4c

2016-11-11T13:14:00

Define _GNU_SOURCE when building SDL

302a6e62

2016-11-11T12:41:06

Fixed bug 3484 - DSP driver does not detect /dev/dsp0 Tobias Kortkamp using SDL 2.0.5 (and a repository checkout) on FreeBSD 11.0 I get this output from testaudioinfo with SDL_AUDIODRIVER=dsp: INFO: Found 8 output devices: INFO: 0: /dev/dsp INFO: 1: /dev/dsp1 INFO: 2: /dev/dsp2 INFO: 3: /dev/dsp3 INFO: 4: /dev/dsp4 INFO: 5: /dev/dsp5 INFO: 6: /dev/dsp6 INFO: 7: /dev/dsp7 INFO: INFO: Found 3 capture devices: INFO: 0: /dev/dsp INFO: 1: /dev/dsp4 INFO: 2: /dev/dsp5 INFO: This is /dev/sndstat: Installed devices: pcm0: <NVIDIA (0x0040) (HDMI/DP 8ch)> (play) pcm1: <NVIDIA (0x0040) (HDMI/DP 8ch)> (play) pcm2: <NVIDIA (0x0040) (HDMI/DP 8ch)> (play) pcm3: <NVIDIA (0x0040) (HDMI/DP 8ch)> (play) pcm4: <Realtek ALC887 (Rear Analog 7.1/2.0)> (play/rec) pcm5: <Realtek ALC887 (Front Analog)> (play/rec) default pcm6: <Realtek ALC887 (Rear Digital)> (play) pcm7: <Realtek ALC887 (Onboard Digital)> (play) No devices installed from userspace. I'd expect to find /dev/dsp0 in the output device list. It's not detected because of a a small logic error in SDL_audiodev.c (see attached patch). With the patch applied I get this which is what I'd expect: INFO: Found 9 output devices: INFO: 0: /dev/dsp INFO: 1: /dev/dsp0 INFO: 2: /dev/dsp1 INFO: 3: /dev/dsp2 INFO: 4: /dev/dsp3 INFO: 5: /dev/dsp4 INFO: 6: /dev/dsp5 INFO: 7: /dev/dsp6 INFO: 8: /dev/dsp7

160e7194

2016-11-11T04:35:06

Fixed whitespace and added code to support older game controller GUIDs

b6542ab2

2016-11-11T04:30:09

Fixed whitespace

47418f2d

2016-11-11T03:35:37

Updated Windows game controller support

79f6ba5a

2016-11-11T03:18:16

Fixed signed/unsigned comparison warnings in Visual Studio

801a9eaf

2016-11-11T04:06:00

Updated Mac OS X game controller support

c406f649

2016-11-10T18:53:50

Added USB VID/PID information to the SDL test programs

0cc6207c

2016-11-10T18:53:29

Added Linux entries for the Logitech Dual Action game controller

ac74e16c

2016-11-10T17:19:34

Standardized the format of the SDL joystick GUID and added functions to retrieve the USB VID/PID from a joystick and game controller.

2898ada3

2016-11-10T12:07:34

wayland: fixed compiler warning about pipe2().

0a294a7b

2016-11-10T11:26:44

nacl: pepper_49 SDK apparently has problems, move buildbot back to pepper_47. (this is still a big leap forward from the previous buildbot target of pepper_35!)

920bc237

2016-11-08T01:12:54

Upgraded buildbot to NaCL SDK pepper_49 (the current stable release).

6380d5c2

2016-11-07T21:10:01

Fixed audio conversion for unsigned 16 bit data.

37d991d7

2016-11-06T20:26:48

Fixed bug 3481 - Configure fails to detect dynamic library support on powerpc64le Sam I've discovered that when building on powerpc64le (and probably powerpc64) SDL's configure script fails to detect dynamic library support, causing it to build a static library. This causes link failures due to undefined symbols later when packages link with -lSDL. This seems to be because the included autotools package is too old to detect powerpc64le. This change corrects the problem for me but newer versions of autotools should handle it without a patch

057bca8a

2016-11-06T15:15:32

Better fix for last point in D3D11 renderer, thanks to Nader Golbaz

0396af65

2016-11-06T14:13:28

Shifting a value by more than its bits isn't defined and has varying behavior depending on compiler and platform

40b571c9

2016-11-06T10:01:08

Fixed bug 3468 - _allshr in SDL_stdlib.c is not working properly Mark Pizzolato On Windows with Visual Studio, when building SDL as a static library using the x86 (32bit) mode, several intrinsic operations are implemented in code in SDL_stdlib.c. One of these, _allshr() is not properly implemented and fails for some input. As a result, some operations on 64bit data elements (long long) don't always work. I classified this bug as a blocker since things absolutely don't work when the affected code is invoked. The affected code is only invoked when SDL is compiled in x86 mode on Visual Studio when building a SDL as a static library. This build environment isn't common, and hence the bug hasn't been noticed previously. I reopened #2537 and mentioned this problem and provided a fix. That fix is provided again here along with test code which could be added to some of the SDL test code. This test code verifies that the x86 intrinsic routines produce the same results as the native x64 instructions which these routines emulate under the Microsoft compiler. The point of the tests is to make sure that Visual Studio x86 code produces the same results as Visual Studio x64 code. Some of the arguments (or boundary conditions) may produce different results on other compiler environments, so the tests really shouldn't be run on all compilers. The test driver only actually exercised code when the compiler defines _MSC_VER, so the driver can generically be invoked without issue.

d7800312

2016-11-06T09:30:06

Fixed bug 3476 - round() needs _GNU_SOURCE on some old systems Ozkan Sezer On systems with old glibc, such mine with glibc-2.8, the following warning is issued and is fixed easily by defining _GNU_SOURCE: /home/me/SDL2-2.0.5/src/video/x11/SDL_x11modes.c: In function 'CalculateXRandRRefreshRate': /home/me/SDL2-2.0.5/src/video/x11/SDL_x11modes.c:263: warning: implicit declaration of function 'round' /home/me/SDL2-2.0.5/src/video/x11/SDL_x11modes.c:263: warning: incompatible implicit declaration of built-in function 'round'

330e2952

2016-11-06T08:47:40

Fixed bug 2421 for D3D11 - SDL_RenderCopyEx off by one when rotating by 90 and -90. Nader Golbaz Updated patch for direct3d renderers

4ed4997c

2016-11-06T08:42:46

Fixed bug 2421 for D3D9 - SDL_RenderCopyEx off by one when rotating by 90 and -90 Nader Golbaz Updated patch for direct3d renderers

d767a450

2016-11-06T08:34:27

Fixed 2942 - Wayland: Drag and Drop / Clipboard x414e54 I have implemented Drag and Drop and Clipboard support for Wayland. Drag and dropping files from nautilus to the testdropfile application seems to work and also copy and paste.

7ad3a46d

2016-11-05T21:23:17

ALSA: Fixed compile warning about unused function. Found by buildbot.

58199232

2016-11-05T21:22:58

WinRT: Corrected header file guard comment.

062ca2b2

2016-11-05T21:22:39

Removed empty statement.

6ed82130

2016-11-05T01:52:28

Fixed Windows build

52988309

2016-11-05T01:48:14

Fixed bug 3480 - minor update to NACL common.js Sylvain All latest official NACL examples have a slightly different 'common.js' file. It seems it has been updated in the meantime to fix a bug.

a17abf10

2016-11-05T03:56:55

Also patched to compile on C89 compilers.

067f0c84

2016-11-05T03:53:59

Patched to compile on C89 compilers.

f3456e9a

2016-11-05T02:34:38

Reworked audio converter code. This no longer uses a script to generate code for every possible type conversion or resampler. This caused a bloat in binary size and and compile times. Now we use a handful of more generic functions and assume staying in the CPU cache is the most important thing anyhow. This shrinks the size of the final build (in this case: macOS X amd64, -Os to optimize for size) by 15%. When compiling on a single core, build times drop by about 15% too (although the previous cost was largely hidden by multicore builds).

7e65d88f

2016-11-03T11:10:52

Removed premake build system.

0f83ae0f

2016-11-03T01:29:56

Added some debug logging to print out every event added to the SDL queue.

baadd546

2016-11-02T02:56:54

Fixed text input events with UIM Alex Baines I realized overnight that my patch probably broke text input events with UIM, and I confirmed that it does. Can't believe I overlooked that... I've been making stupid mistakes in these patches recently, sorry. Anyway, *this* one seems to fix it properly. Knowing my luck it probably breaks something else.

acae3ebf

2016-11-02T02:50:27

Added mapping for the PS3 controller in Bluetooth mode

d0c8bf7f

2016-11-01T10:48:59

Patch from Tapani P?lli to fix a memory leak in X11_InitKeyboard Patch uses XkbFreeKeyboard to free the memory returned by XkbGetMap. Earlier implementation called XkbFreeClientMap which frees all the maps but not data->xkb structure itself, XkbFreeKeyboard will free maps and the structure.

a1f42765

2016-11-01T10:46:47

Patch from Tapani P?lli to fix a memory leak in X11_GL_CreateContext

077d6e64

2016-11-01T10:42:35

Fixed bug with udev support reporting Joshua Bodine I'm going to reopen this because configure should still accurately report whether libudev will be used. Right now it just tests whether it's enabled as an argument, not whether configure was successful in finding it.

8eb76276

2016-11-01T17:38:05

Skip duplicate key events sent by IMEs like uim.

539afc5d

2016-11-01T10:33:44

Fixed bug 3473 - can't build on linux with an old kernel

9a8642bd

2016-11-01T10:30:46

Fixed bug 3478 - Patch Haiku to use dlopen instead of load_add_on Kai Sterker SDL2 on Haiku so far uses Haiku-specific APIs for loading dynamic objects as add-ons, instead of using dlopen to load them as libraries. This, for example, leads to SDL_mixer not being able to load its audio backends, when compiled with standard settings. As discussed at https://www.freelists.org/post/haikuports/SDL2-mixer-ogg-music-not-playing-and-other-stuff,2 , the best way to deal with this would be using dlopen instead of load_add_on. The following patch implements this change by dropping the Haiku-specific bits and using dlopen instead.

98d188f5

2016-10-30T21:01:46

Added call to SDL_HasAVX2() in platform test program.

6f1f77b2

2016-10-30T21:01:33

Fixed outdated info in README.

88f2d16e

2016-10-28T17:00:37

Fixed compiling on older versions of ALSA

fdcac1c2

2016-10-28T16:47:06

Fixed audio data swizzling when the device channel map already matches what SDL expects

5fe98497

2016-10-28T01:28:58

Fix double events / no repeat flag on key events when built withoutibus/fcitx Uses XkbSetDetectableKeyRepeat, and falls back to forcing @im=none if it's not supported.

39ba2ab8

2016-10-22T17:53:03

Fixed NULL pointer dereference, thanks Ozkan Sezer

5b14a943

2016-10-22T11:01:55

Fixed bug 3466 - Can't build 2.0.5 on ppc64 /home/fedora/SDL2-2.0.5/src/video/SDL_blit_N.c: In function 'calc_swizzle32': /home/fedora/SDL2-2.0.5/src/video/SDL_blit_N.c:127:5: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement] const vector unsigned char plus = VECUINT8_LITERAL(0x00, 0x00, 0x00, 0x00, ^

ebf07eb0

2016-10-19T21:22:42

Added tag release-2.0.5 for changeset 38318a3ae49a

54eb9067

2016-10-19T20:50:33

Fixed bug 3460 - docs/README-macosx.md: g++fat.sh should be g++-fat.sh in universal build command Elis?e Maurer I scratched my head for a while until I realized there's a typo in the command listed in the instructions for universal Mac builds: https://hg.libsdl.org/SDL/file/3a3a88db1fc2/docs/README-macosx.md#l24 It should say `g++-fat.sh` but instead it says `g++fat.sh`, which makes `./configure` fail with a C++ preprocessor error.

8a73f7e8

2016-10-19T20:42:22

Fixed bug 3461 - Implement TEXTINPUT events for Haiku Kai Sterker Apparently, SDL2 on Haiku does not generate SDL_TEXTINPUT events. Attached is a patch that adds this functionality. Tested with SDLs own checkkeys program and different keymaps as well as my own SDL application and German keyboard layout to verify it generates the expected input.

kc3-lang/SDL

Log