kmx git

Commit	Date	Message
2b441ec6	2018-02-05T11:40:39	SDL Changes to support clean reads CR: saml
e3cc5b2c	2018-01-03T10:03:25	Updated copyright for 2018
c49fa37c	2017-08-09T11:59:29	Added SDL hints to filter the set of game controllers reported by SDL
ca89d9b5	2017-01-25T22:22:05	Darwin: fix detection of Xbox One S controller Firmware revision 3.1.1221.0 changes the mapping of the Xbox One S controller in Bluetooth mode. Aside from changing the layout of other buttons, this revision also changes the triggers to act as Accelerator and Brake axes from the simulation controls page. The Darwin sysjoystick code didn't previously map anything at these axes, making it impossible to detect input on these two buttons.
61a3ba30	2017-01-07T17:09:14	Replaced a few single-line "//" comments.
082132a7	2017-01-03T23:39:28	Fixed binding the D-pad on some Super NES style controllers Fixed a case where partial trigger pull could be bound to another button There is a fundamental problem not resolved by this commit: Some controllers have axes (triggers, pedals, etc.) that don't start at zero, but we're guaranteed that if we get a value that it's correct. For these controllers, the current code works, where we take the first value we get and use that as the zero point and generate axis motion starting from that point on. Other controllers have digital axes (D-pad) that assume a zero starting point, and the first value we get is the min or max axis value when the D-pad is moved. For these controllers, the current code thinks that the zero point is the axis value after the D-pad motion and this doesn't work. My hypothesis is that the first class of devices is more common and that we should solve for that, and add an exception to SDL_JoystickAxesCenteredAtZero() as needed for the second class of devices.
45b774e3	2017-01-01T18:33:28	Updated copyright for 2017
4fc0fe1f	2016-12-23T02:23:44	Removed debug print statements
ad26769c	2016-12-22T18:43:00	Fixed compile errors on various platforms
97aa5775	2016-11-16T22:08:51	Fixed empty parameter list in signatures of internal functions.
801a9eaf	2016-11-11T04:06:00	Updated Mac OS X game controller support
ac74e16c	2016-11-10T17:19:34	Standardized the format of the SDL joystick GUID and added functions to retrieve the USB VID/PID from a joystick and game controller.
ad1bfea5	2016-08-26T12:18:08	Added SDL_PrivateJoystickAdded() and SDL_PrivateJoystickRemoved() Updated the removal code to iterate over all joystick add messages instead of just the first one.
8097f272	2016-08-08T12:17:53	[ OSX ] enables Xbox One S Guide (System Main Menu) button detection. the one possible impact is that since button identifiers on OSX are just their sequence in the HID report descriptor we might change the button order, and any existing/saved mappings may get their order changed.
4a468739	2016-05-21T00:20:52	Removed Mac OS 10.5 support (bug #3137). Also fixed a warning about deprecated Carbon code when using SDL_audio (bug #3127, thanks Dominik!)
42065e78	2016-01-02T10:10:34	Updated copyright to 2016
4ae69e32	2015-12-28T15:44:09	Mac: expose joystick buttons that report themselves as having 'Start' and 'Select' HID usages. I don't know if any joysticks report those usages for any buttons in practice, but other prominent Mac gaming software exposes them, so we might as well too.
9c51c4a6	2015-11-12T22:44:32	Mac: Detect the d-pad and pause buttons on Steelseries MFi gamepads (bug #3124.)
76fc3788	2015-09-14T22:44:20	Fixed the header guard in the darwin SDL_sysjoystick_c.h file.
4295a6fe	2015-09-13T11:29:45	Mac: Fixed off-by-one bug when plugging in a joystick (thanks, Konstantin!).
0e45984f	2015-06-21T17:33:46	Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
d1980b93	2015-05-26T12:52:28	Mac: Fix compiler warning when building with a min target >= 10.6.
52306459	2015-05-26T08:52:02	Fixed bug 2869 - Controllers connected on launch are reported twice. Since all device detection/removal happens on the main thread now, post events inline with when the status changes occur. Also fixed rare cases when joystick API functions could return data about removed joysticks when called with a device index.
2c4a6ea0	2015-05-26T06:27:46	Updated the copyright year to 2015
b72938c8	2015-04-20T12:22:44	Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.
fe6c797c	2015-04-10T23:30:31	Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.
162ef5ea	2015-03-24T13:52:01	Cleanups in the joystick code. Removed some redundant state and other confusions. Fixes Bugzilla #2738.
4a071b31	2015-03-24T03:24:57	Mac: patched to compile with haptic subsystem disabled (thanks, Rodrigo!). Fixes Bugzilla #2717.
da843f6a	2015-03-11T21:14:21	Updated internal documentation comments.
d34d608e	2015-03-02T11:43:24	SDL - fix crash on OSX when removing a device. If the remove happened due to the CFRunLoopRunInMode call in SDL_SYS_JoystickDetect then we would delete the device right away, before SDL_SYS_JoystickUpdate could clean it up. So move the CFRunLoopRunInMode to after the cleanup logic, preventing this case. This does mean that adds and removes of joysticks now take 1 extra frame to show up.
20186815	2015-02-19T23:52:10	Mac OS X: Better way to stop duplicate joystick reports (thanks, Kyungdahm!). Fixes Bugzilla #2822.
b88ca1b4	2015-02-10T16:28:56	the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802
b48e54aa	2015-01-26T22:00:29	Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.
70438be2	2014-12-03T10:55:23	WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!
9c398852	2014-11-22T22:20:40	Corrected header file documentation comment.
24c86b55	2014-09-11T19:24:42	[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam
724d24d9	2014-08-31T11:21:10	Mac: Don't add the same joystick twice if IOKit reports a duplicate device. Fixes Bugzilla #2704.
fc4e798d	2014-07-07T12:48:25	Fixed bug 2631 - Mac: minor code cleanup Alex Szpakowski Some minor changes to the Mac-specific backend code: - Fixed up some code style issues (mostly brace style inconsistencies). - Fixed a compiler warning in SDL_cocoaevents.m. - Removed some useless code now that the 10.7 SDK is required to build SDL. - Removed Gestalt(gestaltSystemVersion, ...) call and switched to NSAppKitVersionNumber for version checking code. Using Gestalt with gestaltSystemVersion will give 0x1090 in Mac OS 10.10+, and the whole Gestalt function was deprecated in Mac OS 10.8.
446d19c4	2014-06-14T23:31:23	Removed SDL_SYS_JoystickNeedsPolling(). It was simpler to just have the polling (actually: hotplug detection) functions return immediately if it's not an appropriate time to poll. Note that previously, if any joystick/controller was opened, we would poll every time anyhow, skipping this function.
9e5504f8	2014-06-13T14:52:26	Mac: Run the CFRunLoop in joystick mode during SDL_SYS_JoystickNeedsPolling(). This fixes hotplugging failing to detect devices.
8c2c744a	2014-06-13T10:50:24	- fixed crash if you removed a device twice, the deviceRef is invalid if removed from the removed device callback (added in http://hg.libsdl.org/SDL/rev/d4e4d0fcda03 ).
5d7562c7	2014-04-24T23:24:48	Mac OS X: Look for joystick hotplug in its own CFRunLoop. This allows the joystick hotplug to function without the main event loop (specifically: without SDL_INIT_VIDEO), and moves explicit polling for joysticks where it belongs at the low-level: in SDL_SYS_JoystickDetect(). This lets apps call SDL_JoystickUpdate() to get hotplug events and keep SDL_NumJoysticks() correct, as expected. As SDL_PumpEvents() (and SDL_PollEvents, etc) calls SDL_JoystickUpdate(), existing apps will function as before. Thanks to "raskie" on the forums for pointing this out!
3dcb451f	2014-04-09T21:29:19	Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.
96f09df7	2014-02-23T01:24:46	Free the correct variable.
b67b970d	2014-02-22T21:15:34	Mac joystick: ignore duplicate HID elements. The DualShock 4 has all elements listed twice: once in the top-level list of elements, and once in an "Application Collection" element at the top-level. Each element has a proper cookie with a unique value, so now we descend into each element collections, but before we add an element to the device's list, we make sure we don't already have one with that cookie, probably from another collection or a buggy device.
0deb54c0	2014-02-22T00:55:28	Reworked Mac OS X joystick code to use the 10.5+ HID Manager API. Besides being a little more simple to use than the earlier IOKit HID API, and less likely to be deprecated, it also has the added benefit of working with the Sony DualShock 4 controller in Bluetooth mode out of the box, whereas the previous API has a bug that makes it report bad data for the controller. Cleaned up several other things in this code, having gone over every line of it. The remaining deprecated calls are also gone.
7f942688	2014-02-05T01:02:09	Cleanup some vi footer comments, rename new PRIVATE_* funcs to MacHaptic_*.
b352698d	2014-02-04T18:17:16	Implement new backend methods for haptic and hot plugging on OS X
58edac3e	2014-02-02T00:53:27	Fixed bug 2374 - Update copyright for 2014... Is it that time already??
f848adff	2013-11-29T10:06:08	Improve Android pause/resume behavior.
7e1289af	2013-11-24T23:56:17	Make internal SDL sources include SDL_internal.h instead of SDL_config.h The new header will include SDL_config.h, but allows for other global stuff.
b30e396b	2013-11-10T17:56:07	Fixed bug 1965 - Mac: dead code for supporting OS 10.4 Alex Szpakowski The new patch removes all the truly obsolete code I could find. I tested on OS 10.8 and OS 10.5.
cca09422	2013-10-06T20:39:23	Only allocate a joystick instance ID once we know it's a joystick. This fixes compatibility with code that assumes 0 based joystick instance IDs.
5f8de2b9	2013-08-21T10:27:39	Patched to compile on Darwin
695344d1	2013-08-21T09:43:09	OCD fixes: Adds a space before */
dad42067	2013-08-12T11:13:50	Fixes #2022, do not resume on Android when surfaceChanged If the app is in landscape mode and the user presses the power button, a pause is followed immediately by a surfaceChanged event because the lock screen is shown in portrait mode. This triggers a "false" resume. So, we just pause and resume following the onWindowFocusChanged events. Also, wait for SDL_APP_WILLENTERBACKGROUND and SDL_APP_DIDENTERBACKGROUND before blocking the event pump.
1ad936eb	2013-08-11T19:56:43	Fixed bug 2027 - Full-screen appears to be broken - hang in SDL_DestroyWindow() Rainer Deyke I'm running Linux Mint 15 with the Cinnamon window manager. SDL_DestroyWindow consistently locks up for me when the window if fullscreen.

2b441ec6

2018-02-05T11:40:39

SDL Changes to support clean reads CR: saml

e3cc5b2c

2018-01-03T10:03:25

Updated copyright for 2018

c49fa37c

2017-08-09T11:59:29

Added SDL hints to filter the set of game controllers reported by SDL

ca89d9b5

2017-01-25T22:22:05

Darwin: fix detection of Xbox One S controller Firmware revision 3.1.1221.0 changes the mapping of the Xbox One S controller in Bluetooth mode. Aside from changing the layout of other buttons, this revision also changes the triggers to act as Accelerator and Brake axes from the simulation controls page. The Darwin sysjoystick code didn't previously map anything at these axes, making it impossible to detect input on these two buttons.

61a3ba30

2017-01-07T17:09:14

Replaced a few single-line "//" comments.

082132a7

2017-01-03T23:39:28

Fixed binding the D-pad on some Super NES style controllers Fixed a case where partial trigger pull could be bound to another button There is a fundamental problem not resolved by this commit: Some controllers have axes (triggers, pedals, etc.) that don't start at zero, but we're guaranteed that if we get a value that it's correct. For these controllers, the current code works, where we take the first value we get and use that as the zero point and generate axis motion starting from that point on. Other controllers have digital axes (D-pad) that assume a zero starting point, and the first value we get is the min or max axis value when the D-pad is moved. For these controllers, the current code thinks that the zero point is the axis value after the D-pad motion and this doesn't work. My hypothesis is that the first class of devices is more common and that we should solve for that, and add an exception to SDL_JoystickAxesCenteredAtZero() as needed for the second class of devices.

45b774e3

2017-01-01T18:33:28

Updated copyright for 2017

4fc0fe1f

2016-12-23T02:23:44

Removed debug print statements

ad26769c

2016-12-22T18:43:00

Fixed compile errors on various platforms

97aa5775

2016-11-16T22:08:51

Fixed empty parameter list in signatures of internal functions.

801a9eaf

2016-11-11T04:06:00

Updated Mac OS X game controller support

ac74e16c

2016-11-10T17:19:34

Standardized the format of the SDL joystick GUID and added functions to retrieve the USB VID/PID from a joystick and game controller.

ad1bfea5

2016-08-26T12:18:08

Added SDL_PrivateJoystickAdded() and SDL_PrivateJoystickRemoved() Updated the removal code to iterate over all joystick add messages instead of just the first one.

8097f272

2016-08-08T12:17:53

[ OSX ] enables Xbox One S Guide (System Main Menu) button detection. the one possible impact is that since button identifiers on OSX are just their sequence in the HID report descriptor we might change the button order, and any existing/saved mappings may get their order changed.

4a468739

2016-05-21T00:20:52

Removed Mac OS 10.5 support (bug #3137). Also fixed a warning about deprecated Carbon code when using SDL_audio (bug #3127, thanks Dominik!)

42065e78

2016-01-02T10:10:34

Updated copyright to 2016

4ae69e32

2015-12-28T15:44:09

Mac: expose joystick buttons that report themselves as having 'Start' and 'Select' HID usages. I don't know if any joysticks report those usages for any buttons in practice, but other prominent Mac gaming software exposes them, so we might as well too.

9c51c4a6

2015-11-12T22:44:32

Mac: Detect the d-pad and pause buttons on Steelseries MFi gamepads (bug #3124.)

76fc3788

2015-09-14T22:44:20

Fixed the header guard in the darwin SDL_sysjoystick_c.h file.

4295a6fe

2015-09-13T11:29:45

Mac: Fixed off-by-one bug when plugging in a joystick (thanks, Konstantin!).

0e45984f

2015-06-21T17:33:46

Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().

d1980b93

2015-05-26T12:52:28

Mac: Fix compiler warning when building with a min target >= 10.6.

52306459

2015-05-26T08:52:02

Fixed bug 2869 - Controllers connected on launch are reported twice. Since all device detection/removal happens on the main thread now, post events inline with when the status changes occur. Also fixed rare cases when joystick API functions could return data about removed joysticks when called with a device index.

2c4a6ea0

2015-05-26T06:27:46

Updated the copyright year to 2015

b72938c8

2015-04-20T12:22:44

Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.

fe6c797c

2015-04-10T23:30:31

Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.

162ef5ea

2015-03-24T13:52:01

Cleanups in the joystick code. Removed some redundant state and other confusions. Fixes Bugzilla #2738.

4a071b31

2015-03-24T03:24:57

Mac: patched to compile with haptic subsystem disabled (thanks, Rodrigo!). Fixes Bugzilla #2717.

da843f6a

2015-03-11T21:14:21

Updated internal documentation comments.

d34d608e

2015-03-02T11:43:24

SDL - fix crash on OSX when removing a device. If the remove happened due to the CFRunLoopRunInMode call in SDL_SYS_JoystickDetect then we would delete the device right away, before SDL_SYS_JoystickUpdate could clean it up. So move the CFRunLoopRunInMode to after the cleanup logic, preventing this case. This does mean that adds and removes of joysticks now take 1 extra frame to show up.

20186815

2015-02-19T23:52:10

Mac OS X: Better way to stop duplicate joystick reports (thanks, Kyungdahm!). Fixes Bugzilla #2822.

b88ca1b4

2015-02-10T16:28:56

the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802

b48e54aa

2015-01-26T22:00:29

Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.

70438be2

2014-12-03T10:55:23

WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!

9c398852

2014-11-22T22:20:40

Corrected header file documentation comment.

24c86b55

2014-09-11T19:24:42

[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam

724d24d9

2014-08-31T11:21:10

Mac: Don't add the same joystick twice if IOKit reports a duplicate device. Fixes Bugzilla #2704.

fc4e798d

2014-07-07T12:48:25

Fixed bug 2631 - Mac: minor code cleanup Alex Szpakowski Some minor changes to the Mac-specific backend code: - Fixed up some code style issues (mostly brace style inconsistencies). - Fixed a compiler warning in SDL_cocoaevents.m. - Removed some useless code now that the 10.7 SDK is required to build SDL. - Removed Gestalt(gestaltSystemVersion, ...) call and switched to NSAppKitVersionNumber for version checking code. Using Gestalt with gestaltSystemVersion will give 0x1090 in Mac OS 10.10+, and the whole Gestalt function was deprecated in Mac OS 10.8.

446d19c4

2014-06-14T23:31:23

Removed SDL_SYS_JoystickNeedsPolling(). It was simpler to just have the polling (actually: hotplug detection) functions return immediately if it's not an appropriate time to poll. Note that previously, if any joystick/controller was opened, we would poll every time anyhow, skipping this function.

9e5504f8

2014-06-13T14:52:26

Mac: Run the CFRunLoop in joystick mode during SDL_SYS_JoystickNeedsPolling(). This fixes hotplugging failing to detect devices.

8c2c744a

2014-06-13T10:50:24

- fixed crash if you removed a device twice, the deviceRef is invalid if removed from the removed device callback (added in http://hg.libsdl.org/SDL/rev/d4e4d0fcda03 ).

5d7562c7

2014-04-24T23:24:48

Mac OS X: Look for joystick hotplug in its own CFRunLoop. This allows the joystick hotplug to function without the main event loop (specifically: without SDL_INIT_VIDEO), and moves explicit polling for joysticks where it belongs at the low-level: in SDL_SYS_JoystickDetect(). This lets apps call SDL_JoystickUpdate() to get hotplug events and keep SDL_NumJoysticks() correct, as expected. As SDL_PumpEvents() (and SDL_PollEvents, etc) calls SDL_JoystickUpdate(), existing apps will function as before. Thanks to "raskie" on the forums for pointing this out!

3dcb451f

2014-04-09T21:29:19

Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.

96f09df7

2014-02-23T01:24:46

Free the correct variable.

b67b970d

2014-02-22T21:15:34

Mac joystick: ignore duplicate HID elements. The DualShock 4 has all elements listed twice: once in the top-level list of elements, and once in an "Application Collection" element at the top-level. Each element has a proper cookie with a unique value, so now we descend into each element collections, but before we add an element to the device's list, we make sure we don't already have one with that cookie, probably from another collection or a buggy device.

0deb54c0

2014-02-22T00:55:28

Reworked Mac OS X joystick code to use the 10.5+ HID Manager API. Besides being a little more simple to use than the earlier IOKit HID API, and less likely to be deprecated, it also has the added benefit of working with the Sony DualShock 4 controller in Bluetooth mode out of the box, whereas the previous API has a bug that makes it report bad data for the controller. Cleaned up several other things in this code, having gone over every line of it. The remaining deprecated calls are also gone.

7f942688

2014-02-05T01:02:09

Cleanup some vi footer comments, rename new PRIVATE_* funcs to MacHaptic_*.

b352698d

2014-02-04T18:17:16

Implement new backend methods for haptic and hot plugging on OS X

58edac3e

2014-02-02T00:53:27

f848adff

2013-11-29T10:06:08

Improve Android pause/resume behavior.

7e1289af

2013-11-24T23:56:17

Make internal SDL sources include SDL_internal.h instead of SDL_config.h The new header will include SDL_config.h, but allows for other global stuff.

b30e396b

2013-11-10T17:56:07

Fixed bug 1965 - Mac: dead code for supporting OS 10.4 Alex Szpakowski The new patch removes all the truly obsolete code I could find. I tested on OS 10.8 and OS 10.5.

cca09422

2013-10-06T20:39:23

Only allocate a joystick instance ID once we know it's a joystick. This fixes compatibility with code that assumes 0 based joystick instance IDs.

5f8de2b9

2013-08-21T10:27:39

Patched to compile on Darwin

695344d1

2013-08-21T09:43:09

OCD fixes: Adds a space before */

dad42067

2013-08-12T11:13:50

Fixes #2022, do not resume on Android when surfaceChanged If the app is in landscape mode and the user presses the power button, a pause is followed immediately by a surfaceChanged event because the lock screen is shown in portrait mode. This triggers a "false" resume. So, we just pause and resume following the onWindowFocusChanged events. Also, wait for SDL_APP_WILLENTERBACKGROUND and SDL_APP_DIDENTERBACKGROUND before blocking the event pump.

1ad936eb

2013-08-11T19:56:43

Fixed bug 2027 - Full-screen appears to be broken - hang in SDL_DestroyWindow() Rainer Deyke I'm running Linux Mint 15 with the Cinnamon window manager. SDL_DestroyWindow consistently locks up for me when the window if fullscreen.

kc3-lang/SDL/src/joystick/darwin

src/joystick/darwin

Log