kc3-lang/SDL/src/render/software

src/render/software

Log

Author Commit Date CI Message
Misa 3bf7994f 2021-09-27T14:38:12 Add and use `SDL_FALLTHROUGH` for fallthroughs Case fallthrough warnings can be suppressed using the __fallthrough__ compiler attribute. Unfortunately, not all compilers have this attribute, or even have __has_attribute to check if they have the __fallthrough__ attribute. [[fallthrough]] is also available in C++17 and the next C2x, but not everyone uses C++17 or C2x. So define the SDL_FALLTHROUGH macro to deal with those problems - if we are using C++17 or C2x, it expands to [[fallthrough]]; else if the compiler has __has_attribute and has the __fallthrough__ attribute, then it expands to __attribute__((__fallthrough__)); else it expands to an empty statement, with a /* fallthrough */ comment (it's a do {} while (0) statement, because users of this macro need to use a semicolon, because [[fallthrough]] and __attribute__((__fallthrough__)) require a semicolon). Clang before Clang 10 and GCC before GCC 7 have problems with using __attribute__ as a sole statement and warn about a "declaration not declaring anything", so fall back to using the /* fallthrough */ comment if we are using those older compiler versions. Applications using SDL are also free to use this macro (because it is defined in begin_code.h). All existing /* fallthrough */ comments have been replaced with this macro. Some of them were unnecessary because they were the last case in a switch; using SDL_FALLTHROUGH in those cases would result in a compile error on compilers that support __fallthrough__, for having a __attribute__((__fallthrough__)) statement that didn't immediately precede a case label.
Sam Lantinga abc12a83 2021-11-11T15:58:44 Revert "Add and use `SDL_FALLTHROUGH` for fallthroughs" This reverts commit 66a08aa3914a98667f212e79b4f0b9453203d656. This causes problems with older compilers: https://github.com/libsdl-org/SDL/pull/4791#issuecomment-966630997
Misa 66a08aa3 2021-09-27T14:38:12 Add and use `SDL_FALLTHROUGH` for fallthroughs Case fallthrough warnings can be suppressed using the __fallthrough__ compiler attribute. Unfortunately, not all compilers have this attribute, or even have __has_attribute to check if they have the __fallthrough__ attribute. [[fallthrough]] is also available in C++17 and the next C2x, but not everyone uses C++17 or C2x. So define the SDL_FALLTHROUGH macro to deal with those problems - if we are using C++17 or C2x, it expands to [[fallthrough]]; else if the compiler has __has_attribute and has the __fallthrough__ attribute, then it expands to __attribute__((__fallthrough__)); else it expands to an empty statement, with a /* fallthrough */ comment (it's a do {} while (0) statement, because users of this macro need to use a semicolon, because [[fallthrough]] and __attribute__((__fallthrough__)) require a semicolon). Applications using SDL are also free to use this macro (because it is defined in begin_code.h). All existing /* fallthrough */ comments have been replaced with this macro. Some of them were unnecessary because they were the last case in a switch; using SDL_FALLTHROUGH in those cases would result in a compile error on compilers that support __fallthrough__, for having a __attribute__((__fallthrough__)) statement that didn't immediately precede a case label.
Sylvain 502e9c3b 2021-10-24T17:16:49 SDL_Renderer simplifications: - Factorize PrepQueueCmdDraw{,DrawTexture,Solid) into one single function - Change SDL_Texture/Renderer r,g,b,a Uint8 into an SDL_Color, so that it can be passed directly to RenderGeometry - Don't automatically queue a SET_DRAW_COLOR cmd for RenderGeometry (and update GLES2 renderer)
Sylvain c27e1249 2021-09-20T17:17:34 Remove SDL_HAVE_RENDER_GEOMETRY define
Sylvain 54ca1d19 2021-08-27T07:44:03 SW_RenderGeometry: add a redundant check to clear static analysis (see bug #4600)
Ozkan Sezer 8270172e 2021-08-19T12:11:10 fix -Wshorten-64-to-32 warnings in android builds. see: https://github.com/libsdl-org/SDL/pull/4195#issuecomment-901506386
Sylvain a8f89a01 2021-04-23T12:00:14 Change 'size_indice' to 'size_indices'
Sylvain 47db47c1 2021-04-06T21:32:02 Add SDL_HAVE_RENDER_GEOMETRY to compile or not with RenderGeometry support
Sylvain 6e47f538 2021-04-01T20:18:05 Fix warnings
Sylvain cd0663e0 2021-04-01T11:47:45 Fix declaration-after-statement and remove tabs
Sylvain e4812611 2021-04-01T09:49:16 Move to SDL_RenderGeometryRaw prototype with separate xy/uv/color pointer parameters
Sylvain 111c70e1 2021-03-26T09:09:08 Use 64 bits precision to prevent overflow when interpolating color / texture with wide triangles
Sylvain f73c1eff 2021-03-17T09:58:49 Use normalized texture coordinates
Sylvain 3ee511d7 2021-03-16T15:14:58 Add software renderer implementation
Sam Lantinga fcfd19db 2021-08-10T12:02:17 Added support for SDL_RENDERER_PRESENTVSYNC to the software renderer This fixes https://github.com/libsdl-org/SDL/issues/4612
Sam Lantinga 9130f7c3 2021-01-02T10:25:38 Updated copyright for 2021
Sylvain Becker f9b5f6cc 2020-12-27T20:28:24 Forward scale mode to SW renderer (Bug 5313)
Sam Lantinga cb361896 2020-12-09T07:16:22 Fixed bug 5235 - All internal sources should include SDL_assert.h Ryan C. Gordon We should really stick this in SDL_internal.h or something so it's always available.
Sam Lantinga b5e3d264 2020-01-23T01:00:52 Added a single SDL_LEAN_AND_MEAN define to turn on minimal SDL builds Protected more code with #ifdefs to reduce the size of minimal shared library builds
Sam Lantinga a8780c6a 2020-01-16T20:49:25 Updated copyright date for 2020
Sam Lantinga 981e0d36 2020-01-16T08:52:59 Fixed bug 4903 - Lack of color multiply with alpha (SDL_BLENDMODE_MOD + SDL_BLENDMODE_BLEND) blending mode for all renderers Konrad This kind of blending is rather quite useful and in my opinion should be available for all renderers. I do need it myself, but since I didn't want to use a custom blending mode which is supported only by certain renderers (e.g. not in software which is quite important for me) I did write implementation of SDL_BLENDMODE_MUL for all renderers altogether. SDL_BLENDMODE_MUL implements following equation: dstRGB = (srcRGB * dstRGB) + (dstRGB * (1-srcA)) dstA = (srcA * dstA) + (dstA * (1-srcA)) Background: https://i.imgur.com/UsYhydP.png Blended texture: https://i.imgur.com/0juXQcV.png Result for SDL_BLENDMODE_MOD: https://i.imgur.com/wgNSgUl.png Result for SDL_BLENDMODE_MUL: https://i.imgur.com/Veokzim.png I think I did cover all possibilities within included patch, but I didn't write any tests for SDL_BLENDMODE_MUL, so it would be lovely if someone could do it.
Sam Lantinga 5e19e66c 2019-12-22T13:39:44 Fixed bug 4914 - Expose SDL_ScaleMode and add SDL_SetTextureScaleMode/SDL_GetTextureScaleMode Konrad This was something rather trivial to add, but asked at least several times before (I did google about it as well). It should be possible to dynamically change scaling mode of the texture. It is actually trivial task, but until now it was only possible with a hint before creating a texture. I needed it for my game as well, so I took the liberty of writing it myself. This patch adds following functions: SDL_SetTextureScaleMode(SDL_Texture * texture, SDL_ScaleMode scaleMode); SDL_GetTextureScaleMode(SDL_Texture * texture, SDL_ScaleMode *scaleMode); That way you can change texture scaling on the fly.
Sam Lantinga 5dcac4cc 2019-06-18T10:08:19 Fixed 4669 - Using the software SDL_Renderer on Android leads to GL errors & black screen when window resizes Sylvain I think what happening with the software renderer is: * you're somehow in background (so texture creation is not possible) * it resizes and wants to push a SDL_WINDOWEVENT_SIZE_CHANGED It call: https://hg.libsdl.org/SDL/file/a010811d40dd/src/render/SDL_render.c#l683 * GetOutputSize * SW_GetOutputSize * SW_ActivateRenderer * SDL_GetWindowSurface * SDL_CreateWindowFramebuffer which is mapped to SDL_CreateWindowTexture and it ends up re-creating the surface/a texture, while being in background
Sylvain Becker e96d4760 2019-06-18T18:53:58 Android: resize with software rendering, reverted again (Bug 4669)
Sylvain Becker 12b92260 2019-06-18T18:40:40 Android: try to fix resize with software rendering (bug 4669)
Sylvain Becker 8a20d40d 2019-06-18T18:22:18 Android: revert commit SW_GetOutputSize, again (Bug 4669)
Sylvain Becker 98cc7589 2019-06-18T10:41:11 Android: prevent using SW_GetOutputSize with software renderer (Bug 4669)
Ryan C. Gordon 3e9bf284 2019-06-11T15:06:35 software: Fixed compiler warning and dos2unix'd the endlines.
Ryan C. Gordon 04fedce0 2019-06-11T14:09:53 software: Correctly track viewport and cliprect. Fixes Bugzilla #4457.
Sam Lantinga b2e76d86 2019-03-19T16:52:09 Fixed Windows RT build
Sam Lantinga 5e13087b 2019-01-04T22:01:14 Updated copyright for 2019
Sylvain Becker 6259a726 2018-12-05T16:13:12 Warnings: fix a documentation warning and missing prototypes
Ryan C. Gordon 782f1685 2018-11-17T14:37:51 Fixed a few compiler warnings.
Ryan C. Gordon 9262c0de 2018-11-14T22:38:58 software: fix blits with color mods that change during a command queue run.
Ozkan Sezer 0d79a8a1 2018-11-01T20:04:24 fix build using Watcom : ./src/render/SDL_render.c(2168): Error! E1054: Expression must be constant ./src/render/SDL_render.c(2168): Error! E1054: Expression must be constant ./src/render/SDL_render.c(2175): Error! E1054: Expression must be constant ./src/render/SDL_render.c(2175): Error! E1054: Expression must be constant ./src/render/SDL_render.c(2322): Error! E1054: Expression must be constant ./src/render/SDL_render.c(2322): Error! E1054: Expression must be constant ./src/render/SDL_render.c(2322): Error! E1054: Expression must be constant ./src/render/SDL_render.c(2322): Error! E1054: Expression must be constant ./src/render/SDL_render.c(2329): Error! E1054: Expression must be constant ./src/render/SDL_render.c(2329): Error! E1054: Expression must be constant ./src/render/SDL_render.c(2329): Error! E1054: Expression must be constant ./src/render/SDL_render.c(2329): Error! E1054: Expression must be constant ./src/render/software/SDL_render_sw.c(602): Error! E1054: Expression must be constant ./src/render/software/SDL_render_sw.c(602): Error! E1054: Expression must be constant ./src/render/software/SDL_render_sw.c(602): Error! E1054: Expression must be constant ./src/render/software/SDL_render_sw.c(602): Error! E1054: Expression must be constant
Ryan C. Gordon 62494a2e 2018-10-31T15:03:41 Merge SDL-ryan-batching-renderer branch to default.
Sam Lantinga da56cefa 2018-10-30T07:00:03 Fixed bug 4188 - Software renderer SDL_RenderCopyEx blits corrupt image under certain cases Sylvain Re-opening this issue. It fixes the test-case, but it introduces a regression with another bug (bug #4313). So here's a new patch that activate cropping of the source surface to solve the issue. It also reverts the wrong changeset. It prevents unneeded colorkey error message.
Micha? Janiszewski 91820998 2018-10-28T21:36:48 Add and update include guards Include guards in most changed files were missing, I added them keeping the same style as other SDL files. In some cases I moved the include guards around to be the first thing the header has to take advantage of any possible improvements compiler may have for inclusion guards.
Sam Lantinga 82c2f04e 2018-10-09T17:41:40 Fixed bug 4188 - Software renderer SDL_RenderCopyEx blits corrupt image under certain cases duckgrease SDL_RenderCopyEx blits wrong image (in some cases it's bunch of alternating horizontal lines, some cases it's image from the wrong coordinate, and in some cases it's just a bunch of garbled pixels), when the following conditions are met: - Use software renderer. - Enable either horizontal or vertical flip. - source and destination rectangles must have same width and height, and must be smaller than the size of the texture. - source rectangle's X and Y coordinates must be 0.
Ryan C. Gordon 9fedff99 2018-10-03T23:37:29 render: moved software renderer to new interface.
Sam Lantinga eb14b635 2018-05-07T19:52:25 Fixed bug 4134 - Render targets lose scale quality after minimizing a fullscreen window Olli-Samuli Lehmus If one creates a window with the SDL_WINDOW_FULLSCREEN_DESKTOP flag, and creates a render target with SDL_SetHint(SDL_HINT_RENDER_SCALE_QUALITY, "linear"), and afterwards sets SDL_SetHint(SDL_HINT_RENDER_SCALE_QUALITY, "nearest"), after minimizing the window, the scale quality hint is lost on the render target. Textures however do keep their interpolation modes.
Sam Lantinga e3cc5b2c 2018-01-03T10:03:25 Updated copyright for 2018
Sam Lantinga 5ae90ef6 2017-09-21T01:22:40 Fixed bug 3788 - software renderer crashes in SDL_RenderCopyEx with rotation and dstrect w or h is 0 Anthony This is what's making the software renderer crash with rotated destination rectangles of w or h = 0: SDL_SetHint(SDL_HINT_RENDER_SCALE_QUALITY, "2");
Sam Lantinga e98fc897 2017-09-10T12:54:40 Fixed bug 3812 - Fallthrough warnings gcc-7
Sam Lantinga f8e1874d 2017-08-13T22:50:23 Fixed bug 2646 - Problems with software renderer when SDL_SetRenderLogicalSize set Fixed setting the software renderer clip rectangle when a viewport is set
Sam Lantinga 6de66e98 2017-08-11T11:54:24 Fixed bug 3324 - SDL_RenderReadPixels: Wrong rect coordinates with software renderer Daniel SDL_RenderReadPixels with SDL_RENDERER_SOFTWARE reads pixels from wrong coordinates. SW_RenderReadPixels adjusts the rect coordinates according to the viewport. But since this is already done by SDL_RenderReadPixels, the final rect has x2 bigger X and Y.
Sam Lantinga 45b774e3 2017-01-01T18:33:28 Updated copyright for 2017
Sam Lantinga 0d24495b 2016-11-15T01:24:58 Removed unused constants Except for SDL_bmp.c where they are historically interesting and I've left them in.
Sam Lantinga ab8bd3d9 2016-11-15T01:12:27 Fixed bug 3359 - Software renderer does incorrect blending with SDL_RenderCopyEx Simon Hug The software renderer produces incorrect results when blending textures at an angle with certain blend modes. It seems that there were some edge cases that weren't considered when the SW_RenderCopyEx function was last changed. Or another bug possibly covered up the problem. (More on that in another bug report.) Most of the issues come from the fact that the rotating function sets a black colorkey. This is problematic because black is most likely appearing in the surface and the final blit will ignore these pixels. Unless a colorkey is already set (the software renderer currently never sets one), it's very hard to find a free color. Of course it could scan over the whole image until one is found, but that seems inefficient. The following blend modes have issues when drawn at an angle. NONE: The black pixels get ignored, making them essentially transparent. This breaks the 'dstRGBA = srcRGBA' definition of the NONE blend mode. MOD: Again, the black pixels get ignored. This also breaks the 'dstRGB = dstRGB * srcRGB' definition of the MOD blend mode, where black pixels would make the destination black as well. A white colorkey will work though, with some preparations. BLEND: There are some issues when blending a texture with a translucent RGBA target texture. I - uh - forgot what the problem here exactly is. This patch fixes the issues mentioned above. It mainly changes the code so it tries to do things without the colorkey and removes the automatic format conversion part from the SDLgfx_rotateSurface function. Getting the format right is something the caller has to do now and the required code has been added to the SW_RenderCopyEx function. There's a small change to the SW_CreateTexture function. RLE encoding a surface with an alpha mask can be a lossy process. Depending on how the user uses the RGBA channels, this may be undesired. The change that surfaces with an alpha mask don't get encoded makes the software renderer consistent with the other renderers. The SW_RenderCopyEx function now does these steps: Lock the source surface if necessary. Create a clone of the source by using the pixel buffer directly. Check the format and set a flag if a conversion is necessary. Check if scaling or cropping is necessary and set the flag for that as well. Check if color and alpha modulation has to be done before the rotate. Check if the source is an opaque surface. If not, it creates a mask surface that is necessary for the NONE blend mode. If any of the flags were set, a new surface is created and the source will be converted, scaled, cropped, and modulated. The rest of the function stays somewhat the same. The mask also needs to be rotated of course and then there is the NONE blend mode... It's surprisingly hard to get the pixel from a rotated surface to the destination buffer without affecting the pixel outside the rotated area. I found a way to do this with three blits which is pretty hard on the performance. Perhaps someone has an idea how to do this faster? As mentioned above, the SDLgfx_rotateSurface now only takes 8-bit paletted or 32-bit with alpha mask surfaces. It additionally sets the new surfaces up for the MOD blend mode. I shortly tested the 8-bit path of SDLgfx_rotateSurface and it seemed to work so far. This path is not used by the software renderer anyway.
Sam Lantinga 57d01d7d 2016-11-13T22:57:41 Patch from Sylvain to fix clang warnings
Sam Lantinga 77000ff8 2016-11-11T13:38:39 Fixed bug 1822 - Inconsistent renderer behaviour on rotation Sylvain 2016-11-07 08:49:34 UTC when rotated +90 or -90, some transparent lines appears, though there is no Alpha or ColorKey. if you set a dummy colorkey, it will remove the line ... if you set a some alpha mod, the +90/-90 get transparent but not the 0/180 ...
Sam Lantinga 36e40d30 2016-10-11T23:19:05 Fixed bug 2923 - Add SDL_PIXELFORMAT_RGBA32 for byte-wise 32bit RGBA data Daniel Gibson Ok, I followed the simple approach of just making SDL_PIXELFORMAT_RGBA32 an alias of SDL_PIXELFORMAT_RGBA8888/SDL_PIXELFORMAT_ABGR8888, depending on endianess. And I did the same for SDL_PIXELFORMAT_ARGB32, .._BGRA, .._ABGR. SDL_GetPixelFormatName() will of course return SDL_PIXELFORMAT_RGBA8888 (or SDL_PIXELFORMAT_ABGR8888) instead of SDL_PIXELFORMAT_RGBA32, but as long as that's mentioned in the docs it shouldn't be a problem.
Sam Lantinga 9c483655 2016-10-07T18:00:30 Fixed bug 3029 - software renderer cuts off edges when rotate-blitting with a multiple of 90 degrees Adam M. When doing a rotated texture copy with the software renderer, where the angle is a multiple of 90 degrees, one or two edges of the image get cut off. This is because of the following line in sw_rotate.c: if ((unsigned)dx < (unsigned)sw && (unsigned)dy < (unsigned)sh) { which is effectively saying: if (dx >= 0 && dx < src->w-1 && dy >= 0 && dy < src->h-1) { As a result, it doesn't process pixels in the right column or bottom row of the source image (except when they're accessed as part of the bilinear filtering for nearby pixels). This causes it to look like the edges are cut off, and it's especially obvious with an exact multiple of 90 degrees.
Sam Lantinga bf076c22 2016-10-07T17:30:21 Fixed bug 2957 - De-reference rz_src without NULL check in SDLgfx_rotateSurface function Nitz In function SDLgfx_rotateSurface: rz_dst = SDL_CreateRGBSurface(SDL_SWSURFACE, dstwidth, dstheight + GUARD_ROWS, rz_src->format->Rmask, rz_src->format->Gmask, rz_src->format->Bmask, rz_src->format->Amask); Here rz_src get De-referenced without NULL check, which is risky.
Sam Lantinga 86d4b099 2016-09-13T18:44:28 Fixed spacing
Alex Szpakowski f0505766 2016-09-13T22:18:06 Initial Apple TV / tvOS support. The Apple TV remote is currently exposed as a joystick with its touch surface treated as two axes. Key presses are also generated when its buttons and touch surface are used. A new hint has been added to help deal with deciding whether to background the app when the remote's menu button is pressed: SDL_HINT_APPLE_TV_CONTROLLER_UI_EVENTS.
Sam Lantinga 42065e78 2016-01-02T10:10:34 Updated copyright to 2016
Ryan C. Gordon ded3a16e 2015-06-23T01:44:44 Fixed compiler warning about shadowed local variables.
Philipp Wiesemann 0e45984f 2015-06-21T17:33:46 Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
Sam Lantinga d763a9f6 2015-06-19T23:22:53 Fixed bug 2538 - SDL_SetTextureAlphaMod does not work with SDL_FlipMode or rotation in the software renderer Adam M. When setting a texture alpha mod other than 255 and also specifying a flip mode in the software renderer, the rendering fails. When the texture has an alpha channel, it becomes invisible when flipped. When the texture does not have an alpha channel, it is flipped but the colors are wrong: the alpha mod makes the texture darker rather than more translucent. 0) Initialize a software renderer. 1) Load 16-bit 565 or 32-bit texture. 2) Set texture blend mode to BLEND. 3) Set texture alpha mod to 150. 4) Draw the texture flipped horizontally and/or vertically.
Sam Lantinga b7ede6cc 2015-06-19T23:20:43 Fixed bug 1550 - SDL_RenderCopy/CopyEx in software should optionally render 8bit alpha Adam M. There are three problems in the code that I see. 1. SW_RenderCopyEx enables a color key on surface_scaled even if the source surface didn't have a color key. 2. SW_RenderCopyEx doesn't copy blend mode, color mod, or alpha mod from src to surface_scaled. 3. When SDL_BlitScaled(src, srcrect, surface_scaled, &tmp_rect) is called, it blends the src pixels into surface_scaled instead of overwriting them (if src has blending, etc. enabled). I've attached a patch that 1) fixes the three problems that I mentioned, 2) adds the requested performance improvement of using the regular blit function if no rotation or flipping is needed, 3) avoids cloning the source surface if no stretching is required, and simplifies the rotation code slightly.
Sam Lantinga 82ae4f6f 2015-06-19T22:12:47 [mq]: 3027_rleperf.diff
Sam Lantinga 2c4a6ea0 2015-05-26T06:27:46 Updated the copyright year to 2015
Ryan C. Gordon b72938c8 2015-04-20T12:22:44 Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.
Alex Szpakowski fe6c797c 2015-04-10T23:30:31 Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.
Edward Rudd b88ca1b4 2015-02-10T16:28:56 the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802
Philipp Wiesemann b48e54aa 2015-01-26T22:00:29 Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.
David Ludwig 70438be2 2014-12-03T10:55:23 WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!
Philipp Wiesemann 9c398852 2014-11-22T22:20:40 Corrected header file documentation comment.
Pierre-Loup A. Griffais 24c86b55 2014-09-11T19:24:42 [X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam
Sam Lantinga 5c6c8691 2014-07-27T17:43:36 Fixed uninitialized variable in some cases
Sam Lantinga 96b613ea 2014-07-13T09:04:55 Fixed bug 2640 - Unable to SDL_SetRenderTarget to original surface for software renderer without a window Damian Kaczmarek Basically this bug is probably not a common use case. My goal is to allow rendering totally without a window, for example to a screenshot and I need to rely on SDL_SetRenderTarget to properly work for a purely software renderer created by SDL_CreateSoftwareRenderer.
Sam Lantinga fd1da994 2014-07-12T16:21:56 Fixed bug 2639 - SDL_BLENDMODE_BLEND not working properly for software renderer, thanks to Melker Narikka
Sam Lantinga 1b3d4e6d 2014-06-22T09:42:43 565 textures have higher priority than 555 textures
Sam Lantinga 5df11f8a 2014-06-21T21:46:42 Made SDL_PIXELFORMAT_ARGB8888 the default texture format for consistency across renderer implementations.
J?rgen P. Tjern? defd90b6 2014-04-19T13:15:41 Render: Allow empty cliprect. This fixes an issue where an empty cliprect is treated the same as a NULL cliprect, causing the render backends to disable clipping. Also adds a new API, SDL_RenderIsClipEnabled(render) that allows you to differentiate between: - SDL_RenderSetClipRect(render, NULL) - SDL_Rect r = {0,0,0,0}; SDL_RenderSetClipRect(render, &r); Fixes https://bugzilla.libsdl.org/show_bug.cgi?id=2504
David Ludwig 3dcb451f 2014-04-09T21:29:19 Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.
Philipp Wiesemann 83200a32 2014-04-05T23:50:09 Removed empty statements.
Sam Lantinga f9a58968 2014-03-13T21:21:26 Added missing copyright notices
Sam Lantinga 58edac3e 2014-02-02T00:53:27 Fixed bug 2374 - Update copyright for 2014... Is it that time already??
Gabriel Jacobo f848adff 2013-11-29T10:06:08 Improve Android pause/resume behavior.
Ryan C. Gordon 7e1289af 2013-11-24T23:56:17 Make internal SDL sources include SDL_internal.h instead of SDL_config.h The new header will include SDL_config.h, but allows for other global stuff.
Sam Lantinga 4ca34ad4 2013-10-20T21:34:38 Prevent conflicts when linking both SDL2 and SDL2_gfx
Sam Lantinga 12ca3ce3 2013-10-17T23:02:29 Fixed building using MinGW Our SDL_windows.h needed to be included before anything else so UNICODE is defined.
Sam Lantinga f79fc33a 2013-08-29T08:29:21 Christoph Mallon: Remove pointless if (x) before SDL_free(x)
Gabriel Jacobo 1e49b1ed 2013-08-21T09:47:10 OCD fixes: Adds a space after /* (glory to regular expressions!)
Gabriel Jacobo 695344d1 2013-08-21T09:43:09 OCD fixes: Adds a space before */
Gabriel Jacobo dad42067 2013-08-12T11:13:50 Fixes #2022, do not resume on Android when surfaceChanged If the app is in landscape mode and the user presses the power button, a pause is followed immediately by a surfaceChanged event because the lock screen is shown in portrait mode. This triggers a "false" resume. So, we just pause and resume following the onWindowFocusChanged events. Also, wait for SDL_APP_WILLENTERBACKGROUND and SDL_APP_DIDENTERBACKGROUND before blocking the event pump.
Sam Lantinga 1ad936eb 2013-08-11T19:56:43 Fixed bug 2027 - Full-screen appears to be broken - hang in SDL_DestroyWindow() Rainer Deyke I'm running Linux Mint 15 with the Cinnamon window manager. SDL_DestroyWindow consistently locks up for me when the window if fullscreen.
kmx.io     mail     discord kmxgit v0.4.0