kmx git

Commit	Date	Message
3bf7994f	2021-09-27T14:38:12	Add and use `SDL_FALLTHROUGH` for fallthroughs Case fallthrough warnings can be suppressed using the __fallthrough__ compiler attribute. Unfortunately, not all compilers have this attribute, or even have __has_attribute to check if they have the __fallthrough__ attribute. [[fallthrough]] is also available in C++17 and the next C2x, but not everyone uses C++17 or C2x. So define the SDL_FALLTHROUGH macro to deal with those problems - if we are using C++17 or C2x, it expands to [[fallthrough]]; else if the compiler has __has_attribute and has the __fallthrough__ attribute, then it expands to __attribute__((__fallthrough__)); else it expands to an empty statement, with a /* fallthrough / comment (it's a do {} while (0) statement, because users of this macro need to use a semicolon, because [[fallthrough]] and __attribute__((__fallthrough__)) require a semicolon). Clang before Clang 10 and GCC before GCC 7 have problems with using __attribute__ as a sole statement and warn about a "declaration not declaring anything", so fall back to using the / fallthrough / comment if we are using those older compiler versions. Applications using SDL are also free to use this macro (because it is defined in begin_code.h). All existing / fallthrough */ comments have been replaced with this macro. Some of them were unnecessary because they were the last case in a switch; using SDL_FALLTHROUGH in those cases would result in a compile error on compilers that support __fallthrough__, for having a __attribute__((__fallthrough__)) statement that didn't immediately precede a case label.
abc12a83	2021-11-11T15:58:44	Revert "Add and use `SDL_FALLTHROUGH` for fallthroughs" This reverts commit 66a08aa3914a98667f212e79b4f0b9453203d656. This causes problems with older compilers: https://github.com/libsdl-org/SDL/pull/4791#issuecomment-966630997
66a08aa3	2021-09-27T14:38:12	Add and use `SDL_FALLTHROUGH` for fallthroughs Case fallthrough warnings can be suppressed using the __fallthrough__ compiler attribute. Unfortunately, not all compilers have this attribute, or even have __has_attribute to check if they have the __fallthrough__ attribute. [[fallthrough]] is also available in C++17 and the next C2x, but not everyone uses C++17 or C2x. So define the SDL_FALLTHROUGH macro to deal with those problems - if we are using C++17 or C2x, it expands to [[fallthrough]]; else if the compiler has __has_attribute and has the __fallthrough__ attribute, then it expands to __attribute__((__fallthrough__)); else it expands to an empty statement, with a /* fallthrough / comment (it's a do {} while (0) statement, because users of this macro need to use a semicolon, because [[fallthrough]] and __attribute__((__fallthrough__)) require a semicolon). Applications using SDL are also free to use this macro (because it is defined in begin_code.h). All existing / fallthrough */ comments have been replaced with this macro. Some of them were unnecessary because they were the last case in a switch; using SDL_FALLTHROUGH in those cases would result in a compile error on compilers that support __fallthrough__, for having a __attribute__((__fallthrough__)) statement that didn't immediately precede a case label.
3d747078	2021-08-03T01:25:54	Run the renderer so Steam can find the main window
8726f500	2021-08-03T01:10:48	Allow quitting controllermap if there are no controllers attached
8b87b438	2021-03-26T13:01:06	Don't try to map the touchpad button, since we don't have any art for that at the moment.
9130f7c3	2021-01-02T10:25:38	Updated copyright for 2021
ff4bc138	2020-11-23T14:28:16	Fixed mapping controllers after adding the touchpad button
009b62f1	2020-11-07T02:22:15	Be explicit about mapping the new game controller paddle buttons
5a92edee	2020-11-06T15:54:18	Don't try to map the accelerometer as a game controller
59a644fb	2020-11-06T14:44:26	iOS should use the same size window for the controller tests as other platforms Otherwise the position of the button and axis elements won't be correct
3a3aaac2	2020-11-06T11:30:52	Added 4 auxiliary buttons to the game controller API Xbox Elite controllers use AUX1-AUX4 to represent the paddle buttons when using the HIDAPI driver PS4 and PS5 controllers use AUX1 to represent the touchpad button Nintendo Switch Pro controllers use AUX1 to represent the capture button
aba27928	2020-04-18T21:41:37	Added a Windows Gaming Input joystick driver This driver supports the Razer Atrox Arcade Stick Some of the quirks of this driver, inherent in Windows Gaming Input: * There will never appear to be controllers connected at startup. You must support hot-plugging in order to see these controllers. * You can't read the state of the guide button * You can't get controller events in the background
de2001ee	2020-03-13T13:05:40	Fixed binding the D-PAD on the 8BitDo M30 controller
25061816	2020-03-02T10:58:08	Fixed compile warning
0a7fe18f	2020-01-17T11:06:02	On Mac OSX there are spurious hat events at program start, so skip these
a8780c6a	2020-01-16T20:49:25	Updated copyright date for 2020
8ce894a3	2019-12-05T13:18:56	Ignore axis jitter when mapping controllers
8aaf945b	2019-11-28T11:44:15	Fixed mapping controllers that have axes that start at -32768 and then snap to 0 at the first input report
c8896e46	2019-11-21T10:09:26	Turned on controllermap debug output by default
32bb8b4b	2019-09-10T10:03:20	test: replace some exit()s with returns.
5e13087b	2019-01-04T22:01:14	Updated copyright for 2019
e3cc5b2c	2018-01-03T10:03:25	Updated copyright for 2018
20c846eb	2017-03-04T23:05:47	Fixed warning about implicit conversion in controllermap program.
a395a907	2017-01-20T16:40:11	Fixed mapping the PG-9021 which, on Linux, emits a button partway through the trigger press along with axis motion all along the pull
4938c505	2017-01-04T10:28:07	Added SDL_JoystickGetAxisInitialState() to get a joystick axis' initial value. This is useful for controller mapping programs to determine an axis' zero state
1ddff75c	2017-01-04T05:09:02	Some controllers have trouble getting out to 20000
082132a7	2017-01-03T23:39:28	Fixed binding the D-pad on some Super NES style controllers Fixed a case where partial trigger pull could be bound to another button There is a fundamental problem not resolved by this commit: Some controllers have axes (triggers, pedals, etc.) that don't start at zero, but we're guaranteed that if we get a value that it's correct. For these controllers, the current code works, where we take the first value we get and use that as the zero point and generate axis motion starting from that point on. Other controllers have digital axes (D-pad) that assume a zero starting point, and the first value we get is the min or max axis value when the D-pad is moved. For these controllers, the current code thinks that the zero point is the axis value after the D-pad motion and this doesn't work. My hypothesis is that the first class of devices is more common and that we should solve for that, and add an exception to SDL_JoystickAxesCenteredAtZero() as needed for the second class of devices.
45b774e3	2017-01-01T18:33:28	Updated copyright for 2017
de79828b	2016-12-28T20:11:12	Fixed warning about unused variable in controllermap program.
21cb42d7	2016-12-27T09:51:58	Make sure we go all the way back (within the XBox controller dead zone) to prevent accidentally binding axes inverted
6d7da088	2016-12-27T01:39:07	Split controller axes into positive and negative sides so each can be bound independently. Using this a D-Pad can be mapped to a thumbstick and vice versa. Also added support for inverted axes, improving trigger binding support
0a3f9d0c	2016-12-16T22:58:16	Fixed warning about unused variable in controllermap program.
0c5e7a10	2016-12-15T14:27:22	Fixed handling joysticks that send multiple events for a single control, e.g. both a button and axis event for a trigger. Tested with the 8Bitdo NES30 Pro on Linux
c406f649	2016-11-10T18:53:50	Added USB VID/PID information to the SDL test programs
826508b6	2016-10-15T20:01:30	Removed unused constants in controllermap program.
cb7b823c	2016-10-13T02:09:37	Fixed black screen on Steam Link
929b965c	2016-09-21T23:06:38	Fixed compiling of three test programs with C++.
42065e78	2016-01-02T10:10:34	Updated copyright to 2016
7b680a2a	2015-12-18T18:49:23	Fixed mapping third party XBox controllers that have the trigger axis all the way in until they are pulled and get updated values.
11d98995	2015-11-25T21:39:28	Replaced tabs with spaces in test programs.
0e45984f	2015-06-21T17:33:46	Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2c4a6ea0	2015-05-26T06:27:46	Updated the copyright year to 2015
b72938c8	2015-04-20T12:22:44	Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.
fe6c797c	2015-04-10T23:30:31	Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.
b88ca1b4	2015-02-10T16:28:56	the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802
b48e54aa	2015-01-26T22:00:29	Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.
d9991154	2014-12-10T21:13:43	Fixed setting text to clipboard in controllermap program.
70438be2	2014-12-03T10:55:23	WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!
9c398852	2014-11-22T22:20:40	Corrected header file documentation comment.
24c86b55	2014-09-11T19:24:42	[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam
3a803358	2014-05-29T22:44:08	Fixed use of uninitialized variable warning in test program.
f565d81a	2014-05-10T15:57:09	A few more ANDROID for __ANDROID__ replacements
3dcb451f	2014-04-09T21:29:19	Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.
22a7dd0b	2014-03-24T11:42:09	Fixes #2456, controllermap's undo does not work correctly (by Bogdan Marinov)
1f45d4b6	2014-03-18T12:33:57	controllermap: Don't treat SDL_HAT_CENTERED as a valid input.
2d92a372	2014-02-10T11:29:48	Make controllermap, etc, work on platforms with hardcoded window sizes. This makes sure everything renders correctly, even if, say, an Android device gives you a certain "window" size no matter what you ask for.
9268c7a1	2014-02-10T09:26:22	Backed out 0869362ccc3c The render target usage in controllermap is required if you are forced to use the app at a different resolution than the one the art has been made for, for example on Android, where you don't control the resolution. (The coordinates for each button are hardcoded to the art size, and appear out of place otherwise)
f0aa97d2	2014-02-10T01:43:01	Removed unused function.
9a15da84	2014-02-09T15:20:41	No need to use a render target here.
58edac3e	2014-02-02T00:53:27	Fixed bug 2374 - Update copyright for 2014... Is it that time already??
65f0142f	2013-12-25T00:11:28	Fixed access of command line arguments on Android in two test programs.
36cbd506	2013-12-25T00:04:31	Fixed unused local variable warning in test program source.
77d2d55e	2013-12-05T10:51:38	[Android] Handle native thread finishing when not commanded from the Java side
5ac18134	2013-12-03T12:01:28	Adds SDL_GameControllerAddMappingsFromRW, updates controllermap SDL_GameControllerAddMappingsFromFile is now a convenience macro. controllermap can now skip bindings by pressing space or clicking/touching the screen.
95ec90aa	2013-12-02T19:35:04	Adds controllermap utility to test suite.

3bf7994f

2021-09-27T14:38:12

Add and use `SDL_FALLTHROUGH` for fallthroughs Case fallthrough warnings can be suppressed using the __fallthrough__ compiler attribute. Unfortunately, not all compilers have this attribute, or even have __has_attribute to check if they have the __fallthrough__ attribute. [[fallthrough]] is also available in C++17 and the next C2x, but not everyone uses C++17 or C2x. So define the SDL_FALLTHROUGH macro to deal with those problems - if we are using C++17 or C2x, it expands to [[fallthrough]]; else if the compiler has __has_attribute and has the __fallthrough__ attribute, then it expands to __attribute__((__fallthrough__)); else it expands to an empty statement, with a /* fallthrough */ comment (it's a do {} while (0) statement, because users of this macro need to use a semicolon, because [[fallthrough]] and __attribute__((__fallthrough__)) require a semicolon). Clang before Clang 10 and GCC before GCC 7 have problems with using __attribute__ as a sole statement and warn about a "declaration not declaring anything", so fall back to using the /* fallthrough */ comment if we are using those older compiler versions. Applications using SDL are also free to use this macro (because it is defined in begin_code.h). All existing /* fallthrough */ comments have been replaced with this macro. Some of them were unnecessary because they were the last case in a switch; using SDL_FALLTHROUGH in those cases would result in a compile error on compilers that support __fallthrough__, for having a __attribute__((__fallthrough__)) statement that didn't immediately precede a case label.

abc12a83

2021-11-11T15:58:44

Revert "Add and use `SDL_FALLTHROUGH` for fallthroughs" This reverts commit 66a08aa3914a98667f212e79b4f0b9453203d656. This causes problems with older compilers: https://github.com/libsdl-org/SDL/pull/4791#issuecomment-966630997

66a08aa3

2021-09-27T14:38:12

Add and use `SDL_FALLTHROUGH` for fallthroughs Case fallthrough warnings can be suppressed using the __fallthrough__ compiler attribute. Unfortunately, not all compilers have this attribute, or even have __has_attribute to check if they have the __fallthrough__ attribute. [[fallthrough]] is also available in C++17 and the next C2x, but not everyone uses C++17 or C2x. So define the SDL_FALLTHROUGH macro to deal with those problems - if we are using C++17 or C2x, it expands to [[fallthrough]]; else if the compiler has __has_attribute and has the __fallthrough__ attribute, then it expands to __attribute__((__fallthrough__)); else it expands to an empty statement, with a /* fallthrough */ comment (it's a do {} while (0) statement, because users of this macro need to use a semicolon, because [[fallthrough]] and __attribute__((__fallthrough__)) require a semicolon). Applications using SDL are also free to use this macro (because it is defined in begin_code.h). All existing /* fallthrough */ comments have been replaced with this macro. Some of them were unnecessary because they were the last case in a switch; using SDL_FALLTHROUGH in those cases would result in a compile error on compilers that support __fallthrough__, for having a __attribute__((__fallthrough__)) statement that didn't immediately precede a case label.

3d747078

2021-08-03T01:25:54

Run the renderer so Steam can find the main window

8726f500

2021-08-03T01:10:48

Allow quitting controllermap if there are no controllers attached

8b87b438

2021-03-26T13:01:06

Don't try to map the touchpad button, since we don't have any art for that at the moment.

9130f7c3

2021-01-02T10:25:38

Updated copyright for 2021

ff4bc138

2020-11-23T14:28:16

Fixed mapping controllers after adding the touchpad button

009b62f1

2020-11-07T02:22:15

Be explicit about mapping the new game controller paddle buttons

5a92edee

2020-11-06T15:54:18

Don't try to map the accelerometer as a game controller

59a644fb

2020-11-06T14:44:26

iOS should use the same size window for the controller tests as other platforms Otherwise the position of the button and axis elements won't be correct

3a3aaac2

2020-11-06T11:30:52

Added 4 auxiliary buttons to the game controller API Xbox Elite controllers use AUX1-AUX4 to represent the paddle buttons when using the HIDAPI driver PS4 and PS5 controllers use AUX1 to represent the touchpad button Nintendo Switch Pro controllers use AUX1 to represent the capture button

aba27928

2020-04-18T21:41:37

Added a Windows Gaming Input joystick driver This driver supports the Razer Atrox Arcade Stick Some of the quirks of this driver, inherent in Windows Gaming Input: * There will never appear to be controllers connected at startup. You must support hot-plugging in order to see these controllers. * You can't read the state of the guide button * You can't get controller events in the background

de2001ee

2020-03-13T13:05:40

Fixed binding the D-PAD on the 8BitDo M30 controller

25061816

2020-03-02T10:58:08

Fixed compile warning

0a7fe18f

2020-01-17T11:06:02

On Mac OSX there are spurious hat events at program start, so skip these

a8780c6a

2020-01-16T20:49:25

Updated copyright date for 2020

8ce894a3

2019-12-05T13:18:56

Ignore axis jitter when mapping controllers

8aaf945b

2019-11-28T11:44:15

Fixed mapping controllers that have axes that start at -32768 and then snap to 0 at the first input report

c8896e46

2019-11-21T10:09:26

Turned on controllermap debug output by default

32bb8b4b

2019-09-10T10:03:20

test: replace some exit()s with returns.

5e13087b

2019-01-04T22:01:14

Updated copyright for 2019

e3cc5b2c

2018-01-03T10:03:25

Updated copyright for 2018

20c846eb

2017-03-04T23:05:47

Fixed warning about implicit conversion in controllermap program.

a395a907

2017-01-20T16:40:11

Fixed mapping the PG-9021 which, on Linux, emits a button partway through the trigger press along with axis motion all along the pull

4938c505

2017-01-04T10:28:07

Added SDL_JoystickGetAxisInitialState() to get a joystick axis' initial value. This is useful for controller mapping programs to determine an axis' zero state

1ddff75c

2017-01-04T05:09:02

Some controllers have trouble getting out to 20000

082132a7

2017-01-03T23:39:28

Fixed binding the D-pad on some Super NES style controllers Fixed a case where partial trigger pull could be bound to another button There is a fundamental problem not resolved by this commit: Some controllers have axes (triggers, pedals, etc.) that don't start at zero, but we're guaranteed that if we get a value that it's correct. For these controllers, the current code works, where we take the first value we get and use that as the zero point and generate axis motion starting from that point on. Other controllers have digital axes (D-pad) that assume a zero starting point, and the first value we get is the min or max axis value when the D-pad is moved. For these controllers, the current code thinks that the zero point is the axis value after the D-pad motion and this doesn't work. My hypothesis is that the first class of devices is more common and that we should solve for that, and add an exception to SDL_JoystickAxesCenteredAtZero() as needed for the second class of devices.

45b774e3

2017-01-01T18:33:28

Updated copyright for 2017

de79828b

2016-12-28T20:11:12

Fixed warning about unused variable in controllermap program.

21cb42d7

2016-12-27T09:51:58

Make sure we go all the way back (within the XBox controller dead zone) to prevent accidentally binding axes inverted

6d7da088

2016-12-27T01:39:07

Split controller axes into positive and negative sides so each can be bound independently. Using this a D-Pad can be mapped to a thumbstick and vice versa. Also added support for inverted axes, improving trigger binding support

0a3f9d0c

2016-12-16T22:58:16

Fixed warning about unused variable in controllermap program.

0c5e7a10

2016-12-15T14:27:22

Fixed handling joysticks that send multiple events for a single control, e.g. both a button and axis event for a trigger. Tested with the 8Bitdo NES30 Pro on Linux

c406f649

2016-11-10T18:53:50

Added USB VID/PID information to the SDL test programs

826508b6

2016-10-15T20:01:30

Removed unused constants in controllermap program.

cb7b823c

2016-10-13T02:09:37

Fixed black screen on Steam Link

929b965c

2016-09-21T23:06:38

Fixed compiling of three test programs with C++.

42065e78

2016-01-02T10:10:34

Updated copyright to 2016

7b680a2a

2015-12-18T18:49:23

Fixed mapping third party XBox controllers that have the trigger axis all the way in until they are pulled and get updated values.

11d98995

2015-11-25T21:39:28

Replaced tabs with spaces in test programs.

0e45984f

2015-06-21T17:33:46

Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().

2c4a6ea0

2015-05-26T06:27:46

Updated the copyright year to 2015

b72938c8

2015-04-20T12:22:44

Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.

fe6c797c

2015-04-10T23:30:31

Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.

b88ca1b4

2015-02-10T16:28:56

the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802

b48e54aa

2015-01-26T22:00:29

Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.

d9991154

2014-12-10T21:13:43

Fixed setting text to clipboard in controllermap program.

70438be2

2014-12-03T10:55:23

WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!

9c398852

2014-11-22T22:20:40

Corrected header file documentation comment.

24c86b55

2014-09-11T19:24:42

[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam

3a803358

2014-05-29T22:44:08

Fixed use of uninitialized variable warning in test program.

f565d81a

2014-05-10T15:57:09

A few more ANDROID for __ANDROID__ replacements

3dcb451f

2014-04-09T21:29:19

Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.

22a7dd0b

2014-03-24T11:42:09

Fixes #2456, controllermap's undo does not work correctly (by Bogdan Marinov)

1f45d4b6

2014-03-18T12:33:57

controllermap: Don't treat SDL_HAT_CENTERED as a valid input.

2d92a372

2014-02-10T11:29:48

Make controllermap, etc, work on platforms with hardcoded window sizes. This makes sure everything renders correctly, even if, say, an Android device gives you a certain "window" size no matter what you ask for.

9268c7a1

2014-02-10T09:26:22

Backed out 0869362ccc3c The render target usage in controllermap is required if you are forced to use the app at a different resolution than the one the art has been made for, for example on Android, where you don't control the resolution. (The coordinates for each button are hardcoded to the art size, and appear out of place otherwise)

f0aa97d2

2014-02-10T01:43:01

Removed unused function.

9a15da84

2014-02-09T15:20:41

No need to use a render target here.

58edac3e

2014-02-02T00:53:27

65f0142f

2013-12-25T00:11:28

Fixed access of command line arguments on Android in two test programs.

36cbd506

2013-12-25T00:04:31

Fixed unused local variable warning in test program source.

77d2d55e

2013-12-05T10:51:38

[Android] Handle native thread finishing when not commanded from the Java side

5ac18134

2013-12-03T12:01:28

Adds SDL_GameControllerAddMappingsFromRW, updates controllermap SDL_GameControllerAddMappingsFromFile is now a convenience macro. controllermap can now skip bindings by pressing space or clicking/touching the screen.

95ec90aa

2013-12-02T19:35:04

Adds controllermap utility to test suite.

kc3-lang/SDL/test/controllermap.c

test/controllermap.c

Log