kmx git

Commit	Date	Message
eb14b635	2018-05-07T19:52:25	Fixed bug 4134 - Render targets lose scale quality after minimizing a fullscreen window Olli-Samuli Lehmus If one creates a window with the SDL_WINDOW_FULLSCREEN_DESKTOP flag, and creates a render target with SDL_SetHint(SDL_HINT_RENDER_SCALE_QUALITY, "linear"), and afterwards sets SDL_SetHint(SDL_HINT_RENDER_SCALE_QUALITY, "nearest"), after minimizing the window, the scale quality hint is lost on the render target. Textures however do keep their interpolation modes.
e3cc5b2c	2018-01-03T10:03:25	Updated copyright for 2018
cac4e312	2017-12-08T11:34:32	Added check for failure of D3D_ActivateRenderer()
1a1cd8c1	2017-12-08T11:09:05	Fixed bug 1878 - Scaled texture draws with filtering produce wrapping artifacts. Yuri K. Schlesner When using texture filtering, there are filtering artifacts visible on the edges of scaled textures, where the texture filtering pulls in texels from the other side of the texture. Using clamping texture modes wouldn't completely fix this since source rectangles don't need to cover the whole texture. (See screenshot attached in next post.) The opengl driver uses clamping on textures and so avoid this at least in the cases where the source rect is the whole texture. The direct3d driver does not and so has problems in every case. I'm not sure if it can actually completely be fixed, but at least enabling clamping for direct3d would be one step in the right direction.
a6a4e27a	2017-11-12T22:51:12	Updated SDL's YUV support, many thanks to Adrien Descamps New functions get and set the YUV colorspace conversion mode: SDL_SetYUVConversionMode() SDL_GetYUVConversionMode() SDL_GetYUVConversionModeForResolution() SDL_ConvertPixels() converts between all supported RGB and YUV formats, with SSE acceleration for converting from planar YUV formats (YV12, NV12, etc) to common RGB/RGBA formats. Added a new test program, testyuv, to verify correctness and speed of YUV conversion functionality.
30d554e3	2017-08-19T03:07:44	Fixed building SDL applications with Visual Studio and the clang toolset Also fixed building 64-bit SDL with clang. 32-bit doesn't build because of the inline assembly for C runtime support.
c59d9923	2017-08-14T05:51:44	Implemented more flexible blending modes for accelerated renderers This fixes bug 2594 - Propose new blend mode, SDL_BLENDMODE_BLEND_DSTA blendMode = SDL_ComposeCustomBlendMode(SDL_BLENDFACTOR_SRC_ALPHA, SDL_BLENDFACTOR_ONE_MINUS_SRC_ALPHA, SDL_BLENDOPERATION_ADD, SDL_BLENDFACTOR_ZERO, SDL_BLENDFACTOR_ONE, SDL_BLENDOPERATION_ADD); This fixes bug 2828 - Subtractive Blending blendMode = SDL_ComposeCustomBlendMode(SDL_BLENDFACTOR_SRC_ALPHA, SDL_BLENDFACTOR_ONE, SDL_BLENDOPERATION_SUBTRACT, SDL_BLENDFACTOR_ZERO, SDL_BLENDFACTOR_ONE, SDL_BLENDOPERATION_SUBTRACT); This goes partway to fixing bug 3684 - Add support for a pre-multiplied alpha blending mode blendMode = SDL_ComposeCustomBlendMode(SDL_BLENDFACTOR_ONE, SDL_BLENDFACTOR_ONE_MINUS_SRC_ALPHA, SDL_BLENDOPERATION_ADD, SDL_BLENDFACTOR_ONE, SDL_BLENDFACTOR_ONE_MINUS_SRC_ALPHA, SDL_BLENDOPERATION_ADD);
45b774e3	2017-01-01T18:33:28	Updated copyright for 2017
4ed4997c	2016-11-06T08:42:46	Fixed bug 2421 for D3D9 - SDL_RenderCopyEx off by one when rotating by 90 and -90 Nader Golbaz Updated patch for direct3d renderers
27d4f099	2016-10-07T23:40:44	Implemented SDL_GetHintBoolean() to make it easier to check boolean hints
77305d47	2016-10-01T11:46:32	Fixed bug 3345 - SDL_RenderClear inconsistency with ClipRect Simon Hug The description of the SDL_RenderClear function in the SDL_render.h header says the following: "This function clears the entire rendering target, ignoring the viewport." The word "entire" implies that the clipping rectangle set with SDL_RenderSetClipRect also gets ignored. This is left somewhat ambiguous if only the viewport is mentioned. Minor thing, but let's see what the implementations actually do. The software renderer ignores the clipping rectangle when clearing. It even has a comment on this: /* By definition the clear ignores the clip rect */ Most other render drivers (opengl, opengles, opengles2, direct3d, and psp [I assume. Can't test it.]) use the scissor test for the ClipRect and don't disable it when clearing. Clearing will only happen within the clipping rectangle for these drivers. An exception is direct3d11 which uses a clear function that ignores the scissor test.
23af328b	2016-06-24T22:17:56	Fixed Bug 3147 - Windows: Crash when resizing Window since hg 1f9d57965528 Thanks for the fix, Gab!
42065e78	2016-01-02T10:10:34	Updated copyright to 2016
0e45984f	2015-06-21T17:33:46	Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
38549a7b	2015-06-04T00:56:11	Fixed bug 2625 - Direct3D9 with SDL_TEXTUREACCESS_TARGET textures causes an application crash Roberto I have debugged the code checking the function calls when Direct3D is the renderer, remember that with software and OpenGL renderers, this issue is not happening. - Create the texture: SDL_Texture *pTex = SDL_CreateTexture(pRenderer, iFormat, SDL_TEXTUREACCESS_TARGET, pSurf->w, pSurf->h); - Update the texture: SDL_UpdateTexture(pTex, NULL, pSurf->pixels, pSurf->pitch); SDL_render.c, SDL_UpdateTexture(): return renderer->UpdateTexture(renderer, texture, rect, pixels, pitch); SDL_render_d3d.c, D3D_UpdateTexture(): if (D3D_UpdateTextureRep(data->device, &texturedata->texture, texture->format, rect->x, rect->y, rect->w, rect->h, pixels, pitch) < 0) { SDL_render_d3d.c, D3D_UpdateTextureRep(): if (D3D_CreateStagingTexture(device, texture) < 0) { SDL_render_d3d.c, D3D_CreateStagingTexture(): result = IDirect3DDevice9_CreateTexture(..., D3DPOOL_SYSTEMMEM, ...) --> FAIL! with INVALIDCALL code After checking a bit the Microsoft documentation, I found this: D3DUSAGE_RENDERTARGET can only be used with D3DPOOL_DEFAULT. (https://msdn.microsoft.com/en-us/library/windows/desktop/bb172625%28v=vs.85%29.aspx) The call that fails, is using D3DUSAGE_RENDERTARGET with D3DPOOL_SYSTEMMEM which is unsupported, hence the INVALIDCALL return code.
da190975	2015-05-28T18:57:10	Fixed clip rectangle calculation when there is a viewport offset
2c4a6ea0	2015-05-26T06:27:46	Updated the copyright year to 2015
b72938c8	2015-04-20T12:22:44	Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.
fe6c797c	2015-04-10T23:30:31	Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.
b88ca1b4	2015-02-10T16:28:56	the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802
b48e54aa	2015-01-26T22:00:29	Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.
70438be2	2014-12-03T10:55:23	WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!
9c398852	2014-11-22T22:20:40	Corrected header file documentation comment.
24c86b55	2014-09-11T19:24:42	[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam
de3d381c	2014-08-17T14:44:53	Fixed bug 2685 - SDL_RenderReadPixels() doesn't work with offscreen targets Andreas Falkenhahn SDL_RenderReadPixels() doesn't seem to work when trying to read pixels from a texture that has been created using SDL_TEXTUREACCESS_TARGET and has been selected as the render target using SDL_SetRenderTarget(). I am attaching a small program that demonstrates the issue. I get the following result here: READ PIXEL RETURN: 0 --- COLOR CHECK: ff000000 But it should be: READ PIXEL RETURN: 0 --- COLOR CHECK: ffff0000 Tested with SDL 2.0.3 on Windows 7.
d673d8c3	2014-08-16T23:17:47	Fixed bugs 2677 and 2625, made it possible to lock render targets in D3D
1ee96bb9	2014-07-07T10:26:28	Fixed mingw64 build and warnings
2748e282	2014-07-03T10:22:12	The YUV offset is 16 / 255, not 16 / 256
4fd03b95	2014-06-04T10:57:52	Setting the window size changes the fullscreen display mode, unless a window display mode has been set. Testing: * Ran testsprite2 --fullscreen, used Ctrl+ and Ctrl- to change window sizes, verified that the display mode changed as well.
c15e26d7	2014-06-04T10:57:40	Fixed crash and lost pixel data when recovering from a lost device situation (e.g. alt-tab from fullscreen)
49c53fd2	2014-05-31T11:37:12	Use D3D9Ex when available This hopefully works around crashes in Intel D3D9 support in Windows 8.1.
9bc47465	2014-05-18T21:11:30	Changed C++ style comments.
defd90b6	2014-04-19T13:15:41	Render: Allow empty cliprect. This fixes an issue where an empty cliprect is treated the same as a NULL cliprect, causing the render backends to disable clipping. Also adds a new API, SDL_RenderIsClipEnabled(render) that allows you to differentiate between: - SDL_RenderSetClipRect(render, NULL) - SDL_Rect r = {0,0,0,0}; SDL_RenderSetClipRect(render, &r); Fixes https://bugzilla.libsdl.org/show_bug.cgi?id=2504
3dcb451f	2014-04-09T21:29:19	Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.
2c558ca2	2014-03-10T17:19:19	Fixed D3D9 initialization on Windows 8, which doesn't have D3DX
a8f540fe	2014-03-09T22:48:38	Fixed renderer flags to include support for target textures after the renderer is created.
8db4c5a9	2014-02-25T10:04:49	Fixed crash if the input data pitch is larger than the locked texture pitch
22e3217e	2014-02-20T21:07:56	Fixed infinite recursion in D3D_Reset()
6b33f2e8	2014-02-17T22:20:33	Fixed resetting the current render target if the D3D device is reset while using a non-default render target.
076a14b2	2014-02-10T13:40:02	Fixed crash if render target textures are used while the device is lost
ae05f178	2014-02-10T10:02:51	Recreate render target textures when the D3D device is being reset, and notify the application using the SDL_RENDER_TARGETS_RESET event when this happens.
3ab3ea64	2014-02-09T01:56:41	Fixed bug 2385 - error: unknown type name 'IDirect3DDevice9' Sandu Liviu Catalin I'm unable to compile the latest SDL (directly from the repository) even though I disabled every DirectX option since I don't need DirectX. I allways het these errors: D:\DevLibs\SDL\src\render\direct3d\SDL_render_d3d.c:1897:1: error: unknown type name 'IDirect3DDevice9' D:\DevLibs\SDL\src\render\direct3d\SDL_render_d3d.c:1898:25: error: unknown type name 'SDL_Renderer'
58edac3e	2014-02-02T00:53:27	Fixed bug 2374 - Update copyright for 2014... Is it that time already??
aff44ccd	2014-01-27T16:13:13	Patched to compile...uh, everywhere. :)
87cfee27	2014-01-27T16:10:15	Patched to compile on Windows when not supporting Direct3D.
f848adff	2013-11-29T10:06:08	Improve Android pause/resume behavior.
7e1289af	2013-11-24T23:56:17	Make internal SDL sources include SDL_internal.h instead of SDL_config.h The new header will include SDL_config.h, but allows for other global stuff.
ef97aab9	2013-11-14T21:39:54	Backed out changeset 6c59f7c8ec17 - it didn't actually do anything useful
b36d98bd	2013-11-13T21:50:59	Diagonal flipping with RenderCopyEx Ivan Rubinson As it turns out, it was impossible to render a texture flipped diagonally (both vertically and horizontally) with one RenderCopyEx call. With help from #SDL @ freenode, we came up with a fix.
2348e426	2013-10-21T22:08:56	Fixed whitespace
e343273a	2013-10-19T01:29:23	Fixed bug 2162 - SDL_RenderClear not clearing entire render target Kevin Wells Overview: SDL_RenderClear is only clearing part of a texture when it is the render target and a different size than the screen. Steps to Reproduce: 1) This only occurs with the render driver set to direct3d, so: SDL_SetHint(SDL_HINT_RENDER_DRIVER,"direct3d") Also, my window was 1280x720. 2) Create a texture for a render target with a resolution of 1024x1024: texture=SDL_CreateTexture(main_window.renderer,SDL_PIXELFORMAT_RGBA8888,SDL_TEXTUREACCESS_TARGET,1024,1024); SDL_SetTextureBlendMode(texture,SDL_BLENDMODE_BLEND); 3) Target the texture for rendering: SDL_SetRenderTarget(main_window.renderer,texture); 4) Set the draw color to whatever you want (problem occurs with both 0,0,0,0 and 0,0,0,255 among others) and then clear the render target: SDL_SetRenderDrawColor(main_window.renderer,0,0,0,0); SDL_RenderClear(main_window.renderer); Actual Results: Only about the top 3/4s of the texture gets cleared on calling SDL_RenderClear. The bottom 1/4 or so does not clear. Expected Results: Entire render target should be cleared.
12ca3ce3	2013-10-17T23:02:29	Fixed building using MinGW Our SDL_windows.h needed to be included before anything else so UNICODE is defined.
202528a4	2013-09-28T14:07:17	Call AddRef() on the device so it doesn't accidentally get released from underneath the caller.
25f607a3	2013-09-28T14:07:14	Make it clear we're just returning a D3D9 device, allowing for new functions to get other D3D versions
cf5e5a83	2013-09-28T14:07:08	Added a hint to create the D3D device in thread-safe mode: SDL_HINT_RENDER_DIRECT3D_THREADSAFE
803965bc	2013-09-28T14:07:05	Added platform specific call: SDL_RenderGetD3DDevice()
9f390e79	2013-09-28T14:06:59	Moved SDL_Direct3D9GetAdapterIndex() to SDL_windowsvideo.c since it doesn't belong in the window code.
89c31bb4	2013-09-28T14:06:55	Implemented SDL_UpdateYUVTexture() for Direct3D
b6be1435	2013-09-28T14:06:20	Moved D3D_LoadDLL and SDL_Direct3D9GetAdapterIndex to SDL_windowswindow.c at Jorgen's insistence. That file is wrapped in a more appropriate define check so it will work if somebody builds a binary without D3D support. Added a reference to SDL_Direct3D9GetAdapterIndex to SDL_test_common.c so SDL will fail to compile if the new symbol isn't included properly. CR: Jorgen
fae4190d	2013-09-13T17:42:46	Added SDL_Direct3D9GetAdapterIndex(), which returns the adapter index you would pass into CreateDevice to get your device on the right monitor in full screen mode. This fixes the default adapter in SDL_render_d3d.c, which means that tests will work fullscreen off the main monitor now. CR: Sam
f79fc33a	2013-08-29T08:29:21	Christoph Mallon: Remove pointless if (x) before SDL_free(x)
1e49b1ed	2013-08-21T09:47:10	OCD fixes: Adds a space after /* (glory to regular expressions!)
695344d1	2013-08-21T09:43:09	OCD fixes: Adds a space before */
552b04c5	2013-08-20T20:34:40	More non C89 compliant comments
b4426769	2013-08-19T11:02:44	Fixed leaking of pixel shader object in D3D renderer (thanks, Peter!). Fixes Bugzilla #2047.
1455a947	2013-08-17T17:14:15	Fixed Windows build
6995ff18	2013-08-17T09:54:30	Do full state initialization in D3D_Reset(), this fixes blend mode issues when resizing the window on Windows 8.
dad42067	2013-08-12T11:13:50	Fixes #2022, do not resume on Android when surfaceChanged If the app is in landscape mode and the user presses the power button, a pause is followed immediately by a surfaceChanged event because the lock screen is shown in portrait mode. This triggers a "false" resume. So, we just pause and resume following the onWindowFocusChanged events. Also, wait for SDL_APP_WILLENTERBACKGROUND and SDL_APP_DIDENTERBACKGROUND before blocking the event pump.
1ad936eb	2013-08-11T19:56:43	Fixed bug 2027 - Full-screen appears to be broken - hang in SDL_DestroyWindow() Rainer Deyke I'm running Linux Mint 15 with the Cinnamon window manager. SDL_DestroyWindow consistently locks up for me when the window if fullscreen.

eb14b635

2018-05-07T19:52:25

Fixed bug 4134 - Render targets lose scale quality after minimizing a fullscreen window Olli-Samuli Lehmus If one creates a window with the SDL_WINDOW_FULLSCREEN_DESKTOP flag, and creates a render target with SDL_SetHint(SDL_HINT_RENDER_SCALE_QUALITY, "linear"), and afterwards sets SDL_SetHint(SDL_HINT_RENDER_SCALE_QUALITY, "nearest"), after minimizing the window, the scale quality hint is lost on the render target. Textures however do keep their interpolation modes.

e3cc5b2c

2018-01-03T10:03:25

Updated copyright for 2018

cac4e312

2017-12-08T11:34:32

Added check for failure of D3D_ActivateRenderer()

1a1cd8c1

2017-12-08T11:09:05

Fixed bug 1878 - Scaled texture draws with filtering produce wrapping artifacts. Yuri K. Schlesner When using texture filtering, there are filtering artifacts visible on the edges of scaled textures, where the texture filtering pulls in texels from the other side of the texture. Using clamping texture modes wouldn't completely fix this since source rectangles don't need to cover the whole texture. (See screenshot attached in next post.) The opengl driver uses clamping on textures and so avoid this at least in the cases where the source rect is the whole texture. The direct3d driver does not and so has problems in every case. I'm not sure if it can actually completely be fixed, but at least enabling clamping for direct3d would be one step in the right direction.

a6a4e27a

2017-11-12T22:51:12

Updated SDL's YUV support, many thanks to Adrien Descamps New functions get and set the YUV colorspace conversion mode: SDL_SetYUVConversionMode() SDL_GetYUVConversionMode() SDL_GetYUVConversionModeForResolution() SDL_ConvertPixels() converts between all supported RGB and YUV formats, with SSE acceleration for converting from planar YUV formats (YV12, NV12, etc) to common RGB/RGBA formats. Added a new test program, testyuv, to verify correctness and speed of YUV conversion functionality.

30d554e3

2017-08-19T03:07:44

Fixed building SDL applications with Visual Studio and the clang toolset Also fixed building 64-bit SDL with clang. 32-bit doesn't build because of the inline assembly for C runtime support.

c59d9923

2017-08-14T05:51:44

Implemented more flexible blending modes for accelerated renderers This fixes bug 2594 - Propose new blend mode, SDL_BLENDMODE_BLEND_DSTA blendMode = SDL_ComposeCustomBlendMode(SDL_BLENDFACTOR_SRC_ALPHA, SDL_BLENDFACTOR_ONE_MINUS_SRC_ALPHA, SDL_BLENDOPERATION_ADD, SDL_BLENDFACTOR_ZERO, SDL_BLENDFACTOR_ONE, SDL_BLENDOPERATION_ADD); This fixes bug 2828 - Subtractive Blending blendMode = SDL_ComposeCustomBlendMode(SDL_BLENDFACTOR_SRC_ALPHA, SDL_BLENDFACTOR_ONE, SDL_BLENDOPERATION_SUBTRACT, SDL_BLENDFACTOR_ZERO, SDL_BLENDFACTOR_ONE, SDL_BLENDOPERATION_SUBTRACT); This goes partway to fixing bug 3684 - Add support for a pre-multiplied alpha blending mode blendMode = SDL_ComposeCustomBlendMode(SDL_BLENDFACTOR_ONE, SDL_BLENDFACTOR_ONE_MINUS_SRC_ALPHA, SDL_BLENDOPERATION_ADD, SDL_BLENDFACTOR_ONE, SDL_BLENDFACTOR_ONE_MINUS_SRC_ALPHA, SDL_BLENDOPERATION_ADD);

45b774e3

2017-01-01T18:33:28

Updated copyright for 2017

4ed4997c

2016-11-06T08:42:46

Fixed bug 2421 for D3D9 - SDL_RenderCopyEx off by one when rotating by 90 and -90 Nader Golbaz Updated patch for direct3d renderers

27d4f099

2016-10-07T23:40:44

Implemented SDL_GetHintBoolean() to make it easier to check boolean hints

77305d47

2016-10-01T11:46:32

Fixed bug 3345 - SDL_RenderClear inconsistency with ClipRect Simon Hug The description of the SDL_RenderClear function in the SDL_render.h header says the following: "This function clears the entire rendering target, ignoring the viewport." The word "entire" implies that the clipping rectangle set with SDL_RenderSetClipRect also gets ignored. This is left somewhat ambiguous if only the viewport is mentioned. Minor thing, but let's see what the implementations actually do. The software renderer ignores the clipping rectangle when clearing. It even has a comment on this: /* By definition the clear ignores the clip rect */ Most other render drivers (opengl, opengles, opengles2, direct3d, and psp [I assume. Can't test it.]) use the scissor test for the ClipRect and don't disable it when clearing. Clearing will only happen within the clipping rectangle for these drivers. An exception is direct3d11 which uses a clear function that ignores the scissor test.

23af328b

2016-06-24T22:17:56

Fixed Bug 3147 - Windows: Crash when resizing Window since hg 1f9d57965528 Thanks for the fix, Gab!

42065e78

2016-01-02T10:10:34

Updated copyright to 2016

0e45984f

2015-06-21T17:33:46

Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().

38549a7b

2015-06-04T00:56:11

Fixed bug 2625 - Direct3D9 with SDL_TEXTUREACCESS_TARGET textures causes an application crash Roberto I have debugged the code checking the function calls when Direct3D is the renderer, remember that with software and OpenGL renderers, this issue is not happening. - Create the texture: SDL_Texture *pTex = SDL_CreateTexture(pRenderer, iFormat, SDL_TEXTUREACCESS_TARGET, pSurf->w, pSurf->h); - Update the texture: SDL_UpdateTexture(pTex, NULL, pSurf->pixels, pSurf->pitch); SDL_render.c, SDL_UpdateTexture(): return renderer->UpdateTexture(renderer, texture, rect, pixels, pitch); SDL_render_d3d.c, D3D_UpdateTexture(): if (D3D_UpdateTextureRep(data->device, &texturedata->texture, texture->format, rect->x, rect->y, rect->w, rect->h, pixels, pitch) < 0) { SDL_render_d3d.c, D3D_UpdateTextureRep(): if (D3D_CreateStagingTexture(device, texture) < 0) { SDL_render_d3d.c, D3D_CreateStagingTexture(): result = IDirect3DDevice9_CreateTexture(..., D3DPOOL_SYSTEMMEM, ...) --> FAIL! with INVALIDCALL code After checking a bit the Microsoft documentation, I found this: D3DUSAGE_RENDERTARGET can only be used with D3DPOOL_DEFAULT. (https://msdn.microsoft.com/en-us/library/windows/desktop/bb172625%28v=vs.85%29.aspx) The call that fails, is using D3DUSAGE_RENDERTARGET with D3DPOOL_SYSTEMMEM which is unsupported, hence the INVALIDCALL return code.

da190975

2015-05-28T18:57:10

Fixed clip rectangle calculation when there is a viewport offset

2c4a6ea0

2015-05-26T06:27:46

Updated the copyright year to 2015

b72938c8

2015-04-20T12:22:44

Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.

fe6c797c

2015-04-10T23:30:31

Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.

b88ca1b4

2015-02-10T16:28:56

the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802

b48e54aa

2015-01-26T22:00:29

Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.

70438be2

2014-12-03T10:55:23

WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!

9c398852

2014-11-22T22:20:40

Corrected header file documentation comment.

24c86b55

2014-09-11T19:24:42

[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam

de3d381c

2014-08-17T14:44:53

Fixed bug 2685 - SDL_RenderReadPixels() doesn't work with offscreen targets Andreas Falkenhahn SDL_RenderReadPixels() doesn't seem to work when trying to read pixels from a texture that has been created using SDL_TEXTUREACCESS_TARGET and has been selected as the render target using SDL_SetRenderTarget(). I am attaching a small program that demonstrates the issue. I get the following result here: READ PIXEL RETURN: 0 --- COLOR CHECK: ff000000 But it should be: READ PIXEL RETURN: 0 --- COLOR CHECK: ffff0000 Tested with SDL 2.0.3 on Windows 7.

d673d8c3

2014-08-16T23:17:47

Fixed bugs 2677 and 2625, made it possible to lock render targets in D3D

1ee96bb9

2014-07-07T10:26:28

Fixed mingw64 build and warnings

2748e282

2014-07-03T10:22:12

The YUV offset is 16 / 255, not 16 / 256

4fd03b95

2014-06-04T10:57:52

Setting the window size changes the fullscreen display mode, unless a window display mode has been set. Testing: * Ran testsprite2 --fullscreen, used Ctrl+ and Ctrl- to change window sizes, verified that the display mode changed as well.

c15e26d7

2014-06-04T10:57:40

Fixed crash and lost pixel data when recovering from a lost device situation (e.g. alt-tab from fullscreen)

49c53fd2

2014-05-31T11:37:12

Use D3D9Ex when available This hopefully works around crashes in Intel D3D9 support in Windows 8.1.

9bc47465

2014-05-18T21:11:30

Changed C++ style comments.

defd90b6

2014-04-19T13:15:41

Render: Allow empty cliprect. This fixes an issue where an empty cliprect is treated the same as a NULL cliprect, causing the render backends to disable clipping. Also adds a new API, SDL_RenderIsClipEnabled(render) that allows you to differentiate between: - SDL_RenderSetClipRect(render, NULL) - SDL_Rect r = {0,0,0,0}; SDL_RenderSetClipRect(render, &r); Fixes https://bugzilla.libsdl.org/show_bug.cgi?id=2504

3dcb451f

2014-04-09T21:29:19

Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.

2c558ca2

2014-03-10T17:19:19

Fixed D3D9 initialization on Windows 8, which doesn't have D3DX

a8f540fe

2014-03-09T22:48:38

Fixed renderer flags to include support for target textures after the renderer is created.

8db4c5a9

2014-02-25T10:04:49

Fixed crash if the input data pitch is larger than the locked texture pitch

22e3217e

2014-02-20T21:07:56

Fixed infinite recursion in D3D_Reset()

6b33f2e8

2014-02-17T22:20:33

Fixed resetting the current render target if the D3D device is reset while using a non-default render target.

076a14b2

2014-02-10T13:40:02

Fixed crash if render target textures are used while the device is lost

ae05f178

2014-02-10T10:02:51

Recreate render target textures when the D3D device is being reset, and notify the application using the SDL_RENDER_TARGETS_RESET event when this happens.

3ab3ea64

2014-02-09T01:56:41

Fixed bug 2385 - error: unknown type name 'IDirect3DDevice9' Sandu Liviu Catalin I'm unable to compile the latest SDL (directly from the repository) even though I disabled every DirectX option since I don't need DirectX. I allways het these errors: D:\DevLibs\SDL\src\render\direct3d\SDL_render_d3d.c:1897:1: error: unknown type name 'IDirect3DDevice9' D:\DevLibs\SDL\src\render\direct3d\SDL_render_d3d.c:1898:25: error: unknown type name 'SDL_Renderer'

58edac3e

2014-02-02T00:53:27

Fixed bug 2374 - Update copyright for 2014... Is it that time already??

aff44ccd

2014-01-27T16:13:13

Patched to compile...uh, everywhere. :)

87cfee27

2014-01-27T16:10:15

Patched to compile on Windows when not supporting Direct3D.

f848adff

2013-11-29T10:06:08

Improve Android pause/resume behavior.

7e1289af

2013-11-24T23:56:17

Make internal SDL sources include SDL_internal.h instead of SDL_config.h The new header will include SDL_config.h, but allows for other global stuff.

ef97aab9

2013-11-14T21:39:54

Backed out changeset 6c59f7c8ec17 - it didn't actually do anything useful

b36d98bd

2013-11-13T21:50:59

Diagonal flipping with RenderCopyEx Ivan Rubinson As it turns out, it was impossible to render a texture flipped diagonally (both vertically and horizontally) with one RenderCopyEx call. With help from #SDL @ freenode, we came up with a fix.

2348e426

2013-10-21T22:08:56

Fixed whitespace

e343273a

2013-10-19T01:29:23

Fixed bug 2162 - SDL_RenderClear not clearing entire render target Kevin Wells Overview: SDL_RenderClear is only clearing part of a texture when it is the render target and a different size than the screen. Steps to Reproduce: 1) This only occurs with the render driver set to direct3d, so: SDL_SetHint(SDL_HINT_RENDER_DRIVER,"direct3d") Also, my window was 1280x720. 2) Create a texture for a render target with a resolution of 1024x1024: texture=SDL_CreateTexture(main_window.renderer,SDL_PIXELFORMAT_RGBA8888,SDL_TEXTUREACCESS_TARGET,1024,1024); SDL_SetTextureBlendMode(texture,SDL_BLENDMODE_BLEND); 3) Target the texture for rendering: SDL_SetRenderTarget(main_window.renderer,texture); 4) Set the draw color to whatever you want (problem occurs with both 0,0,0,0 and 0,0,0,255 among others) and then clear the render target: SDL_SetRenderDrawColor(main_window.renderer,0,0,0,0); SDL_RenderClear(main_window.renderer); Actual Results: Only about the top 3/4s of the texture gets cleared on calling SDL_RenderClear. The bottom 1/4 or so does not clear. Expected Results: Entire render target should be cleared.

12ca3ce3

2013-10-17T23:02:29

Fixed building using MinGW Our SDL_windows.h needed to be included before anything else so UNICODE is defined.

202528a4

2013-09-28T14:07:17

Call AddRef() on the device so it doesn't accidentally get released from underneath the caller.

25f607a3

2013-09-28T14:07:14

Make it clear we're just returning a D3D9 device, allowing for new functions to get other D3D versions

cf5e5a83

2013-09-28T14:07:08

Added a hint to create the D3D device in thread-safe mode: SDL_HINT_RENDER_DIRECT3D_THREADSAFE

803965bc

2013-09-28T14:07:05

Added platform specific call: SDL_RenderGetD3DDevice()

9f390e79

2013-09-28T14:06:59

Moved SDL_Direct3D9GetAdapterIndex() to SDL_windowsvideo.c since it doesn't belong in the window code.

89c31bb4

2013-09-28T14:06:55

Implemented SDL_UpdateYUVTexture() for Direct3D

b6be1435

2013-09-28T14:06:20

Moved D3D_LoadDLL and SDL_Direct3D9GetAdapterIndex to SDL_windowswindow.c at Jorgen's insistence. That file is wrapped in a more appropriate define check so it will work if somebody builds a binary without D3D support. Added a reference to SDL_Direct3D9GetAdapterIndex to SDL_test_common.c so SDL will fail to compile if the new symbol isn't included properly. CR: Jorgen

fae4190d

2013-09-13T17:42:46

Added SDL_Direct3D9GetAdapterIndex(), which returns the adapter index you would pass into CreateDevice to get your device on the right monitor in full screen mode. This fixes the default adapter in SDL_render_d3d.c, which means that tests will work fullscreen off the main monitor now. CR: Sam

f79fc33a

2013-08-29T08:29:21

Christoph Mallon: Remove pointless if (x) before SDL_free(x)

1e49b1ed

2013-08-21T09:47:10

OCD fixes: Adds a space after /* (glory to regular expressions!)

695344d1

2013-08-21T09:43:09

OCD fixes: Adds a space before */

552b04c5

2013-08-20T20:34:40

More non C89 compliant comments

b4426769

2013-08-19T11:02:44

Fixed leaking of pixel shader object in D3D renderer (thanks, Peter!). Fixes Bugzilla #2047.

1455a947

2013-08-17T17:14:15

Fixed Windows build

6995ff18

2013-08-17T09:54:30

Do full state initialization in D3D_Reset(), this fixes blend mode issues when resizing the window on Windows 8.

dad42067

2013-08-12T11:13:50

Fixes #2022, do not resume on Android when surfaceChanged If the app is in landscape mode and the user presses the power button, a pause is followed immediately by a surfaceChanged event because the lock screen is shown in portrait mode. This triggers a "false" resume. So, we just pause and resume following the onWindowFocusChanged events. Also, wait for SDL_APP_WILLENTERBACKGROUND and SDL_APP_DIDENTERBACKGROUND before blocking the event pump.

1ad936eb

2013-08-11T19:56:43

Fixed bug 2027 - Full-screen appears to be broken - hang in SDL_DestroyWindow() Rainer Deyke I'm running Linux Mint 15 with the Cinnamon window manager. SDL_DestroyWindow consistently locks up for me when the window if fullscreen.

kc3-lang/SDL/src/render/direct3d

src/render/direct3d

Log