|
4c7a16b7
|
2017-12-18T15:56:21
|
|
odb_loose: read_header should use zstream
Make `read_header` use the common zstream implementation.
Remove the now unnecessary zlib wrapper in odb_loose.
|
|
6155e06b
|
2017-12-17T18:44:02
|
|
zstream: introduce a single chunk reader
Introduce `get_output_chunk` that will inflate/deflate all the available
input buffer into the output buffer. `get_output` will call
`get_output_chunk` in a loop, while other consumers can use it to
inflate only a piece of the data.
|
|
b1e66bfc
|
2017-12-17T16:31:35
|
|
odb: test loose object streaming
|
|
80dc3946
|
2017-12-17T16:26:48
|
|
odb_loose: packlike loose objects use `git_zstream`
Refactor packlike loose object reads to use `git_zstream` for
simplification.
|
|
7cb5bae7
|
2017-12-17T11:55:18
|
|
odb: loose object streaming for packlike loose objects
A "packlike" loose object was a briefly lived loose object format where
the type and size were encoded in uncompressed space at the beginning of
the file, followed by the compressed object contents. Handle these in a
streaming manner as well.
|
|
dbe3d3e9
|
2017-12-17T02:12:19
|
|
odb_loose: test reading a large file in stream
Since some test situations may have generous disk space, but limited RAM
(eg hosted build agents), test that we can stream a large file into a
loose object, and then stream it out of the loose object storage.
|
|
b61846f2
|
2017-12-17T02:14:29
|
|
odb: introduce streaming loose object reader
Provide a streaming loose object reader.
|
|
97f9a5f0
|
2017-12-17T01:12:49
|
|
odb: provide length and type with streaming read
The streaming read functionality should provide the length and the type
of the object, like the normal read functionality does.
|
|
c74e9271
|
2017-12-16T22:10:11
|
|
odb_loose: stream -> writestream
There are two streaming functions; one for reading, one for writing.
Disambiguate function names between `stream` and `writestream` to make
allowances for a read stream.
|
|
f55accce
|
2018-02-01T09:42:33
|
|
Merge pull request #4040 from tiennou/examples/merge
Merge example
|
|
341608dc
|
2018-01-31T14:48:42
|
|
Merge pull request #4507 from tomas/patch-1
Honor 'GIT_USE_NSEC' option in `filesystem_iterator_set_current`
|
|
9d8510b3
|
2018-01-31T09:28:43
|
|
Merge pull request #4488 from libgit2/ethomson/conflict_marker_size
Use longer conflict markers in recursive merge base
|
|
054e4c08
|
2018-01-31T14:28:25
|
|
Set ctime/mtime nanosecs to 0 if USE_NSEC is not defined
|
|
cdab165d
|
2018-01-31T09:27:39
|
|
Merge pull request #4490 from libgit2/ethomson/apfs_precompose_fixes
status::renames: test update for APFS (write NFD instead of NFC filename)
|
|
752006dd
|
2018-01-30T23:21:19
|
|
Honor 'GIT_USE_NSEC' option in `filesystem_iterator_set_current`
This should have been part of PR #3638. Without this we still get
nsec-related errors, even when using -DGIT_USE_NSEC:
error: ‘struct stat’ has no member named ‘st_mtime_nsec’
|
|
895fd51a
|
2018-01-29T22:37:12
|
|
Merge pull request #4474 from pks-t/pks/null-oid
Special-casing null OIDs
|
|
c935b926
|
2018-01-29T22:35:50
|
|
Merge pull request #4502 from pks-t/pks/security-reporting
README.md: add notes on how to report security issues
|
|
699a48f8
|
2018-01-29T07:41:54
|
|
README.md: add notes on how to report security issues
|
|
275f103d
|
2018-01-12T08:59:40
|
|
odb: reject reading and writing null OIDs
The null OID (hash with all zeroes) indicates a missing object in
upstream git and is thus not a valid object ID. Add defensive
measurements to avoid writing such a hash to the object database in the
very unlikely case where some data results in the null OID. Furthermore,
add shortcuts when reading the null OID from the ODB to avoid ever
returning an object when a faulty repository may contain the null OID.
|
|
c0487bde
|
2018-01-12T08:23:43
|
|
tree: reject writing null-OID entries to a tree
In commit a96d3cc3f (cache-tree: reject entries with null sha1,
2017-04-21), the git.git project has changed its stance on null OIDs in
tree objects. Previously, null OIDs were accepted in tree entries to
help tools repair broken history. This resulted in some problems though
in that many code paths mistakenly passed null OIDs to be added to a
tree, which was not properly detected.
Align our own code base according to the upstream change and reject
writing tree entries early when the OID is all-zero.
|
|
33f44db9
|
2018-01-25T22:17:39
|
|
examples: zero out our options memory before use
|
|
fb79d7d1
|
2018-01-17T02:34:32
|
|
examples: our/their can be NULL
|
|
cc845595
|
2018-01-17T02:25:36
|
|
examples: fix remaining review comments
|
|
5ce4f19b
|
2018-01-17T02:25:36
|
|
examples: move support code into static functions
|
|
503b30d5
|
2018-01-17T02:25:36
|
|
examples: hoist the merge analysis back into main
|
|
60c6547c
|
2018-01-17T02:25:36
|
|
examples: minor review fixups
|
|
59ea2c58
|
2018-01-17T02:25:36
|
|
examples: add merge
|
|
bb9353cf
|
2018-01-17T02:25:36
|
|
examples: Dead code & warnings
|
|
3fa5e577
|
2018-01-17T02:25:36
|
|
examples: Move xrealloc to common example code
|
|
b6720018
|
2018-01-17T02:25:36
|
|
examples: Switch to the nifty argv helpers from common
|
|
71c43065
|
2018-01-25T11:10:42
|
|
Merge pull request #4497 from medranocalvo/export-mempack
odb: export mempack backend
|
|
d23ce187
|
2018-01-22T11:55:28
|
|
odb: export mempack backend
Fixes #4492, #4496.
|
|
9af7fbc3
|
2018-01-21T14:00:50
|
|
status::renames: write NFD instead of NFC filename
Update the status::renames test to create an NFD format filename in the
core.precomposedunicode tests.
Previously, we would create an NFC format filename. This was to take
advantage of HFS+ filesystems, which always use canonically decomposed
formats, and would actually write the filename to disk as an NFD
filename. So previously, we could create an NFC filename, but read it
normally as an NFD filename.
But APFS formats do not force canonically decomposed formats for
filenames, so creating an NFC filename does not get converted to NFD.
Instead, the filename will be written in NFC format. Our test,
therefore, does not work - when we write an NFC filename, it will
_remain_ NFC.
Update the test to write NFD always. This will ensure that the file
will actually be canonically decomposed on all platforms: HFS+, which
forces NFD, and APFS, which does not.
Thus, our test will continue to ensure that an NFD filename is
canonically precomposed on all filesystems.
|
|
db39807c
|
2018-01-21T11:22:12
|
|
CHANGELOG: include merge_file conflict marker size
|
|
185b0d08
|
2018-01-20T19:41:28
|
|
merge: recursive uses larger conflict markers
Git uses longer conflict markers in the recursive merge base - two more
than the default (thus, 9 character long conflict markers). This allows
users to tell the difference between the recursive merge conflicts and
conflicts between the ours and theirs branches.
This was introduced in git d694a17986a28bbc19e2a6c32404ca24572e400f.
Update our tests to expect this as well.
|
|
b8e9467a
|
2018-01-20T19:39:34
|
|
merge: allow custom conflict marker size
Allow for a custom conflict marker size, allowing callers to override
the default size of the "<<<<<<<" and ">>>>>>>" markers in the
conflicted output file.
|
|
45f58409
|
2018-01-20T15:15:40
|
|
Merge pull request #4484 from pks-t/pks/fail-creating-branch-HEAD
branch: refuse creating branches named 'HEAD'
|
|
4ea8035d
|
2018-01-20T14:56:51
|
|
Merge pull request #4478 from libgit2/cmn/packed-refs-sorted
refs: include " sorted " in our packed-refs header
|
|
5171f44c
|
2018-01-20T14:56:12
|
|
Merge pull request #4483 from libgit2/cmn/prettify-docs
message: update docs for git_message_prettify
|
|
820370fe
|
2018-01-19T10:03:49
|
|
Merge pull request #4481 from pks-t/pks/tests-online-clone-url-memleak
tests: online::clone: fix memory leak due to not freeing URL
|
|
a9677e01
|
2018-01-19T09:20:59
|
|
branch: refuse creating branches named 'HEAD'
Since a625b092c (branch: correctly reject refs/heads/{-dash,HEAD},
2017-11-14), which is included in v2.16.0, upstream git refuses to
create branches which are named HEAD to avoid ambiguity with the
symbolic HEAD reference. Adjust our own code to match that behaviour and
reject creating branches names HEAD.
|
|
dcb668ba
|
2018-01-19T01:11:37
|
|
message: update docs for git_message_prettify
We used to hard-code the octothorpe as the comment character and the
documentation still mentions this even though we accept the comment character as
a parameter.
Update the line to indicate this and clean up the first paragraph a bit.
|
|
820fb712
|
2018-01-18T07:48:28
|
|
tests: online::clone: fix memory leak due to not freeing URL
|
|
4893a9c0
|
2018-01-17T13:54:42
|
|
Merge pull request #4451 from libgit2/charliesome/trailer-info
Implement message trailer parsing API
|
|
d4a3a4b5
|
2018-01-17T12:52:08
|
|
rename find_trailer to extract_trailer_block
|
|
ecd55cec
|
2018-01-17T12:29:05
|
|
Merge pull request #4477 from pks-t/pks/memleaks
Memory leaks
|
|
3e5239e4
|
2018-01-16T23:55:46
|
|
update code docs
|
|
1e758fd3
|
2018-01-16T22:20:50
|
|
just use git_message_trailer in tests
|
|
6062032e
|
2018-01-16T20:54:05
|
|
try and fix windows build
|
|
d43974fb
|
2018-01-16T13:40:26
|
|
Change trailer API to return a simple array
|
|
9bf37ddd
|
2018-01-12T15:17:41
|
|
refs: include " sorted " in our packed-refs header
This lets git know that we do in fact have written our packed-refs file
sorted (which is apparently not necessarily the case) and it can then use the
new-ish mmaped access which lets it avoid significant amounts of effort parsing
potentially large files to get to a single piece of data.
|
|
782402c2
|
2018-01-12T13:09:23
|
|
tests: refs::iterator: fix memory leak due to ref names not being free'd
The test refs::iterator::foreach_name iterates through every reference
and copies its name into a local vector. While the test makes sure to
free the vector afterwards, the copied reference names are not being
free'd. Fix that.
|
|
5963292f
|
2018-01-12T13:03:19
|
|
refs: document need to free refs in foreach-callback
References passed to the callback function of `git_reference_foreach`
are expected to be owned by the callback. As such, they are never being
freed by `git_reference_foreach`, but will have to be freed by the
caller. This small detail is never mentioned in the function's
documentation, though, making it easy to get wrong. Document this to
make it discoverable.
|
|
90f81f9f
|
2018-01-12T12:56:57
|
|
transports: local: fix memory leak in reference walk
Upon downloading the pack file, the local transport will iterate through
every reference using `git_reference_foreach`. The function is a bit
tricky though in that it requires the passed callback to free the
references, which does not currently happen.
Fix the memory leak by freeing all passed references in the callback.
|
|
093e671e
|
2018-01-12T12:55:40
|
|
tests: network::fetchlocal: let cleanup function handle sandbox cleanup
Two tests in network::fetchlocal explicitly set a cleanup function to
free and remove the created sandbox repositories. This is not necessary,
though, as the cleanup function executed after each test already takes
care of cleaning up after them. Remove the code to avoid needless code
duplication.
|
|
5734768b
|
2018-01-10T19:19:34
|
|
Merge remote-tracking branch 'origin/master' into charliesome/trailer-info
|
|
f1323d9c
|
2018-01-10T18:19:09
|
|
Merge pull request #4472 from libgit2/ethomson/libgit2deps_azure
travis: fetch trusty dependencies from Bintray
|
|
6e748130
|
2018-01-10T15:13:23
|
|
travis: we use bintray's own key for signing
The VM on Travis apparently will still proceed, but it's good practice.
|
|
da9898ab
|
2018-01-10T12:33:56
|
|
travis: fetch trusty dependencies from bintray
The trusty dependencies are now hosted on Bintray.
|
|
0b967396
|
2018-01-10T12:45:41
|
|
Merge pull request #4471 from libgit2/cmn/cmake-feature-302
cmake: use a FEATURE_SUMMARY call compatible with 3.0.2
|
|
6d452600
|
2018-01-10T11:52:15
|
|
cmake: use a FEATURE_SUMMARY call compatible with 3.0.2
When we print features, we make an effort to support all the way back to
pre-3.0. However, in the code for versions from 3 onward we call
`FEATURE_SUMMARY` with multiple kinds of elements to print in the same line.
This is only supported in CMake 3.1 and later, making the rather popular CMake
3.0.2 unable to build the library.
Use a single kind of element per invocation. This means we need to provide a
"description" text, which CMake provides for us if provide multiple kinds of
elements.
|
|
a7e36d3d
|
2018-01-08T13:30:04
|
|
Merge pull request #4468 from libgit2/cmn/openssl-pc
Make sure to include 'openssl' as a dep when building statically with SHA1DC
|
|
b21c5408
|
2018-01-08T12:33:07
|
|
cmake: add openssl to the private deps list when it's the TLS implementation
We might want OpenSSL to be the implementation for SHA-1 and/or TLS. If we only
want it for TLS (e.g. we're building with the collision-detecting SHA-1
implementation) then we did not indicate this to the systems including us a
static library.
Add OpenSSL to the list also during the TLS decision to make sure we say we
should link to it if we use it for TLS.
|
|
b85548ed
|
2018-01-08T12:30:50
|
|
cmake: treat LIBGIT2_PC_REQUIRES as a list
It is indeed a list of dependencies for those which include the static archive.
This is in preparation for adding two possible places where we might add openssl
as a dependency.
|
|
ddd36510
|
2018-01-07T15:40:06
|
|
Merge pull request #4467 from libgit2/cmn/static-archive-later
cmake: move the rule to find static archives close to building clar
|
|
85e40bbf
|
2018-01-07T12:51:26
|
|
cmake: move the rule to find static archives close to building clar
If we're building static libraries, we want to use that for building our clar
binary. This is done in 49551254 (2017-09-22; cmake: use static dependencies
when building static libgit2) but that commit included the rule too early,
making it affect the search for iconv, meaning we did not find it when we were
building a static libgit2.
Move the rule to just before building clar, after we've included the rules for
building the library itself. This lets us find and link to the dynamic libiconv.
|
|
70db57d4
|
2018-01-05T15:31:51
|
|
Merge pull request #4398 from pks-t/pks/generic-sha1
cmake: allow explicitly choosing SHA1 backend
|
|
f4f0e7eb
|
2018-01-04T08:24:43
|
|
switch back to braced array initializers
|
|
70aa6146
|
2017-12-05T08:48:31
|
|
cmake: allow explicitly choosing SHA1 backend
Right now, if SHA1DC is disabled, the SHA1 backend is mostly chosen
based on which system libgit2 is being compiled on and which libraries
have been found. To give developers and distributions more choice,
enable them to request specific backends by passing in a
`-DSHA1_BACKEND=<BACKEND>` option instead. This completely replaces the
previous auto-selection.
|
|
e7495ce6
|
2017-12-05T08:47:57
|
|
cmake: default to using SHA1DC
Upstream git.git has changed their default SHA1 implementation to the
collision-detection algorithm SHA1DC in commit e6b07da27 (Makefile: make
DC_SHA1 the default, 2017-03-17). To match upstream, align ourselves and
switch over to SHA1DC by default.
|
|
f315cd14
|
2018-01-03T18:44:12
|
|
make separators const a macro as well
|
|
fb29ba09
|
2018-01-03T18:32:09
|
|
remove empty lines between @-lines
|
|
1cda43ba
|
2018-01-03T18:30:04
|
|
make comment_line_char const a macro
|
|
6bc7301e
|
2018-01-03T16:16:22
|
|
Don't use newer C syntax for declaration in tests
|
|
eebc5e0d
|
2018-01-03T15:15:16
|
|
Merge pull request #4257 from pks-t/pks/stale-test
Execute stale tests
|
|
a223bae5
|
2018-01-03T14:57:25
|
|
Merge pull request #4437 from pks-t/pks/openssl-hash-errors
hash: openssl: check return values of SHA1_* functions
|
|
399c0b19
|
2018-01-03T14:55:06
|
|
Merge pull request #4462 from pks-t/pks/diff-generated-excessive-stats
diff_generate: avoid excessive stats of .gitattribute files
|
|
d8896bda
|
2018-01-03T16:07:36
|
|
diff_generate: avoid excessive stats of .gitattribute files
When generating a diff between two trees, for each file that is to be
diffed we have to determine whether it shall be treated as text or as
binary files. While git has heuristics to determine which kind of diff
to generate, users can also that default behaviour by setting or
unsetting the 'diff' attribute for specific files.
Because of that, we have to query gitattributes in order to determine
how to diff the current files. Instead of hitting the '.gitattributes'
file every time we need to query an attribute, which can get expensive
especially on networked file systems, we try to cache them instead. This
works perfectly fine for every '.gitattributes' file that is found, but
we hit cache invalidation problems when we determine that an attribuse
file is _not_ existing. We do create an entry in the cache for missing
'.gitattributes' files, but as soon as we hit that file again we
invalidate it and stat it again to see if it has now appeared.
In the case of diffing large trees with each other, this behaviour is
very suboptimal. For each pair of files that is to be diffed, we will
repeatedly query every directory component leading towards their
respective location for an attributes file. This leads to thousands or
even hundreds of thousands of wasted syscalls.
The attributes cache already has a mechanism to help in that scenario in
form of the `git_attr_session`. As long as the same attributes session
is still active, we will not try to re-query the gitmodules files at all
but simply retain our currently cached results. To fix our problem, we
can create a session at the top-most level, which is the initialization
of the `git_diff` structure, and use it in order to look up the correct
diff driver. As the `git_diff` structure is used to generate patches for
multiple files at once, this neatly solves our problem by retaining the
session until patches for all files have been generated.
The fix has been tested with linux.git by calling
`git_diff_tree_to_tree` and `git_diff_to_buf` with v4.10^{tree} and
v4.14^{tree}.
| time | .gitattributes stats
without fix | 33.201s | 844614
with fix | 30.327s | 4441
While execution only improved by roughly 10%, the stat(3) syscalls for
.gitattributes files decreased by 99.5%. The benchmarks were quite
simple with best-of-three timings on Linux ext4 systems. One can assume
that for network based file systems the performance gain will be a lot
larger due to a much higher latency.
|
|
30455a56
|
2018-01-03T13:09:21
|
|
Merge pull request #4439 from tiennou/fix/4352
cmake: create a dummy file for Xcode
|
|
ba56f781
|
2018-01-03T12:54:42
|
|
streams: openssl: fix thread-safety for OpenSSL error messages
The function `ERR_error_string` can be invoked without providing a
buffer, in which case OpenSSL will simply return a string printed into a
static buffer. Obviously and as documented in ERR_error_string(3), this
is not thread-safe at all. As libgit2 is a library, though, it is easily
possible that other threads may be using OpenSSL at the same time, which
might lead to clobbered error strings.
Fix the issue by instead using a stack-allocated buffer. According to
the documentation, the caller has to provide a buffer of at least 256
bytes of size. While we do so, make sure that the buffer will never get
overflown by switching to `ERR_error_string_n` to specify the buffer's
size.
|
|
75e1737a
|
2017-12-08T10:10:19
|
|
hash: openssl: check return values of SHA1_* functions
The OpenSSL functions `SHA1_Init`, `SHA1_Update` and `SHA1_Final` all
return 1 for success and 0 otherwise, but we never check their return
values. Do so.
|
|
5874e151
|
2017-11-20T13:26:33
|
|
tests: create new test target for all SSH-based tests
Some tests shall be run against our own SSH server we spin up in Travis.
As those need to be run separate from our previous tests which run
against git-daemon, we have to do this in a separate step. Instead of
bundling all that knowledge in the CI script, move it into the test
build instructions by creating a new test target.
|
|
54a1bf05
|
2017-06-07T13:06:53
|
|
tests: online::clone: inline creds-test with nonexistent URL
Right now, we test our credential callback code twice, once via SSH on
localhost and once via a non-existent GitHub repository. While the first
URL makes sense to be configurable, it does not make sense to hard-code
the non-existing repository, which requires us to call tests multiple
times. Instead, we can just inline the URL into another set of tests.
|
|
fea60920
|
2017-06-07T12:48:48
|
|
tests: online::clone: construct credential-URL from environment
We support two types of passing credentials to the proxy, either via the
URL or explicitly by specifying user and password. We test these types
by modifying the proxy URL and executing the tests twice, which is
in fact unnecessary and requires us to maintain the list of environment
variables and test executions across multiple CI infrastructures.
To fix the situation, we can just always pass the host, port, user and
password to the tests. The tests can then assemble the complete URL
either with or without included credentials, allowing us to test both
cases in-process.
|
|
543ec149
|
2017-06-07T11:06:01
|
|
tests: perf: build but exclude performance tests by default
Our performance tests (or to be more concrete, our single performance
test) are not built by default, as they are always #ifdef'd out. While
it is true that we don't want to run performance tests by default, not
compiling them at all may cause code rot and is thus an unfavorable
approach to handle this.
We can easily improve this situation: this commit removes the #ifdef,
causing the code to always be compiled. Furthermore, we add `-xperf` to
the default command line parameters of `generate.py`, thus causing the
tests to be excluded by default.
Due to this approach, we are now able to execute the performance tests
by passing `-sperf` to `libgit2_clar`. Unfortunately, we cannot execute
the performance tests on Travis or AppVeyor as they rely on history
being available for the libgit2 repository. As both do a shallow clone
only, though, this is not given.
|
|
b8c14499
|
2017-06-07T11:00:26
|
|
tests: iterator::workdir: fix reference count in stale test
The test `iterator::workdir::filesystem_gunk` is usually not executed,
as it is guarded by the environment variable "GITTEST_INVASIVE_SPEED"
due to its effects on speed. As such, it has become stale and does not
account for new references which have meanwhile been added to the
testrepo, causing it to fail. Fix this by raising the number of expected
references to 15.
|
|
9aba7636
|
2017-06-07T10:59:31
|
|
tests: iterator_helpers: assert number of iterator items
When the function `expect_iterator_items` surpasses the number of
expected items, we simply break the loop. This causes us to trigger an
assert later on which has message attached, which is annoying when
trying to locate the root error cause. Instead, directly assert that the
current count is still smaller or equal to the expected count inside of
the loop.
|
|
72c28ab0
|
2017-06-07T10:59:03
|
|
tests: status::worktree: indicate skipped tests on Win32
Some function bodies of tests which are not applicable to the Win32
platform are completely #ifdef'd out instead of calling `cl_skip()`.
This leaves us with no indication that these tests are not being
executed at all and may thus cause decreased scrutiny when investigating
skipped tests. Improve the situation by calling `cl_skip()` instead of
just doing nothing.
|
|
8999f6ac
|
2017-06-07T11:01:28
|
|
travis: build sources with tracing enabled
Our tracing architecture is not built by default, causing the Travis CI
to not execute some code and skip several tests. As AppVeyor has already
enabled the tracing architecture when building the code, we should do
the same for Travis CI to have this code being tested on macOS and
Linux.
Add "-DENABLE_TRACE=ON" to our release-build options of Travis.
|
|
4964aea0
|
2018-01-03T11:28:26
|
|
Merge pull request #4456 from libgit2/ethomson/treebuilder_docs
docs: git_treebuilder_insert validates entries
|
|
98303ea3
|
2018-01-03T11:27:12
|
|
Merge pull request #4457 from libgit2/ethomson/tree_error_messages
tree: standard error messages are lowercase
|
|
e8bc8558
|
2018-01-02T13:29:49
|
|
Merge remote-tracking branch 'origin/master' into charliesome/trailer-info
|
|
7610638e
|
2018-01-01T17:52:06
|
|
Merge pull request #4453 from libgit2/ethomson/spnego
winhttp: properly support ntlm and negotiate
|
|
2c99011a
|
2017-12-31T09:33:19
|
|
tree: standard error messages are lowercase
Our standard error messages begin with a lower case letter so that they
can be prefixed or embedded nicely.
These error messages were missed during the standardization pass since
they use the `tree_error` helper function.
|
|
346c1b16
|
2017-12-31T09:25:42
|
|
docs: git_treebuilder_insert validates entries
The documentation for `git_treebuilder_insert` erroneously states that
we do not validate that the entry being inserted exists. We do, as of
https://github.com/libgit2/libgit2/pull/3633. Update the documentation
to reflect the new reality.
|
|
d6210245
|
2017-12-30T13:09:43
|
|
Merge pull request #4159 from richardipsum/notes-commit
Support using notes via a commit rather than a ref
|
|
8cdf439b
|
2017-12-30T13:07:03
|
|
Merge pull request #4028 from chescock/improve-local-fetch
Transfer fewer objects on push and local fetch
|
|
2b7a3393
|
2017-12-30T12:47:57
|
|
Merge pull request #4455 from libgit2/ethomson/branch_symlinks
refs: traverse symlinked directories
|
|
e14bf97e
|
2017-12-30T08:09:22
|
|
Merge pull request #4443 from libgit2/ethomson/large_loose_blobs
Inflate large loose blobs
|
|
7a830f28
|
2017-12-30T00:46:17
|
|
refs:iterator: add tests to recurse symlinks
Ensure that we can recurse into directories via symbolic links.
|