kmx git

Commit	Date	Message
12a1790d	2018-09-17T14:49:46	revwalk: only check the first commit in the list for an earlier timestamp This is not a big deal, but it does make us match git more closely by checking only the first. The lists are sorted already, so there should be no functional difference other than removing a possible check from every iteration in the loop.
46f35127	2018-09-17T14:39:58	revwalk: use the max value for a signed integer When porting, we overlooked that the difference between git's and our's time representation and copied their way of getting the max value. Unfortunately git was using unsigned integers, so `~0ll` does correspond to their max value, whereas for us it corresponds to `-1`. This means that we always consider the last date to be smaller than the current commit's and always think commits are interesting. Change the initial value to the macro that gives us the maximum value on each platform so we can accurately consider commits interesting or not.
aa8cb586	2018-08-21T01:12:11	revwalk: The left operand of '<' is a garbage value At line 594, we do this : if (error < 0) return error; but if nothing was pushed in a GIT_SORT_TIME revwalk, we'd return uninitialized stack data.
a4ffbae4	2018-07-29T11:46:05	revwalk: remove tautologic condition for hiding a commit The contition cannot be reached with `commit->uninteresting` being true: either a `break` or a `continue` statement will be hit in this case.
4fd81c53	2018-06-18T19:43:53	Clear revwalk sorting when resetting Currently we fail to clear the sorting flag for revwalks when resetting. This caused a poor interaction with the limited flag during a recent patch. This patch clears the revwalk sorting flag and causes it to no longer persist over resets.
cc9c9522	2018-06-18T12:10:17	Merge pull request #4606 from libgit2/cmn/revwalk-iteration revwalk: avoid walking the entire history when output is unsorted
ff98fec0	2018-06-18T10:25:07	revwalk: formatting updates
ecf4f33a	2018-02-08T11:14:48	Convert usage of `git_buf_free` to new `git_buf_dispose`
54fd80e3	2018-04-12T13:32:27	revwalk: fix uninteresting revs sometimes not limiting graphwalk When we want to limit our graphwalk, we use the heuristic of checking whether the newest limiting (uninteresting) revision is newer than the oldest interesting revision. We do so by inspecting whether the first item's commit time of the user-supplied list of revisions is newer than the last added interesting revision. This is wrong though, as the user supplied list is in no way guaranteed to be sorted by increasing commit dates. This could lead us to abort the revwalk early before applying all relevant limiting revisions, outputting revisions which should in fact have been hidden. Fix the heuristic by instead checking whether _any_ of the limiting commits was made earlier than the last interesting commit. Add a test.
ef682410	2018-04-11T17:52:51	revwalk: remove one useless layer of functions We don't currently need to have anything that's different between `get_revision` and `get_one_revision` so let's just remove the inner function and make the code more straightforward.
2a6d0956	2018-04-01T14:01:52	revwalk: avoid walking the entire history when output is unsorted As part of reducing our divergence from git, its code for revwalk was ported into our codebase. A detail about when to limit the list was lost and we ended up always calling that code. Limiting the list means performing the walk and creating the final list of commits to be output during the preparation stage. This is unavoidable when sorting and when there are negative refs. We did this even when asked for unsorted output with no negative refs, which you might do to retrieve something like the "last 10 commits on HEAD" for a nominally unsorted meaning of "last". This commit adds and sets a flag indicating when we do need to limit the list, letting us avoid doing so when we can. The previously mentioned query thus no longer loads the entire history of the project during the prepare stage, but loads it iteratively during the walk.
0c7f49dd	2017-06-30T13:39:01	Make sure to always include "common.h" first Next to including several files, our "common.h" header also declares various macros which are then used throughout the project. As such, we have to make sure to always include this file first in all implementation files. Otherwise, we might encounter problems or even silent behavioural differences due to macros or defines not being defined as they should be. So in fact, our header and implementation files should make sure to always include "common.h" first. This commit does so by establishing a common include pattern. Header files inside of "src" will now always include "common.h" as its first other file, separated by a newline from all the other includes to make it stand out as special. There are two cases for the implementation files. If they do have a matching header file, they will always include this one first, leading to "common.h" being transitively included as first file. If they do not have a matching header file, they instead include "common.h" as first file themselves. This fixes the outlined problems and will become our standard practice for header and source files inside of the "src/" from now on.
c11c08a5	2017-03-09T14:01:10	Skip uninteresting commits in revwalk timesort iterator Fixes #4099
0d716905	2017-01-27T15:23:15	oidmap: remove GIT__USE_OIDMAP macro
85d2748c	2017-01-27T14:05:10	khash: avoid using `kh_key`/`kh_val` as lvalue
f31cb45a	2017-01-25T15:31:12	khash: avoid using `kh_put` directly
cb18386f	2017-01-25T14:26:58	khash: avoid using `kh_val`/`kh_value` directly
a853c527	2017-01-25T14:14:32	khash: avoid using `kh_get` directly
64e46dc3	2017-01-25T14:14:12	khash: avoid using `kh_end` directly
9694d9ba	2017-01-25T14:09:17	khash: avoid using `kh_foreach`/`kh_foreach_value` directly
909d5494	2016-12-29T12:25:15	giterr_set: consistent error messages Error messages should be sentence fragments, and therefore: 1. Should not begin with a capital letter, 2. Should not conclude with punctuation, and 3. Should not end a sentence and begin a new one
013ecb4f	2016-11-25T15:00:50	revwalk: do not re-declare `commit` variable
fedc05c8	2016-10-06T18:13:34	revwalk: don't show commits that become uninteresting after being enqueued When we read from the list which `limit_list()` gives us, we need to check that the commit is still interesting, as it might have become uninteresting after it was added to the list.
82d4c0e6	2016-10-05T12:55:53	revwalk: update the description for the default sorting It changed from implementation-defined to git's default sorting, as there are systems (e.g. rebase) which depend on this order. Also specify more explicitly how you can get git's "date-order".
ea1ceb7f	2016-10-05T12:23:26	revwalk: remove a useless enqueueing phase for topological and default sorting After `limit_list()` we already have the list in time-sorted order, which is what we want in the "default" case. Enqueueing into the "unsorted" list would just reverse it, and the topological sort will do its own sorting if it needs to.
9db367bf	2016-09-27T16:14:42	revwalk: get rid of obsolete marking code We've now moved to code that's closer to git and produces the output during the preparation phase, so we no longer process the commits as part of generating the output. This makes a chunk of code redundant, as we're simply short-circuiting it by detecting we've processed the commits alrady.
e93b7e32	2016-09-27T13:35:48	revwalk: style change Change the condition for returning 0 more in line with that we write elsewhere in the library.
48c64362	2016-09-27T11:59:24	revwalk: port over the topological sorting After porting over the commit hiding and selection we were still left with mistmaching output due to the topologial sort. This ports the topological sorting code to make us match with our equivalent of `--date-order` and `--topo-order` against the output from `rev-list`.
6708618c	2016-07-21T01:24:12	revwalk: get closer to git We had some home-grown logic to figure out which objects to show during the revision walk, but it was rather inefficient, looking over the same list multiple times to figure out when we had run out of interesting commits. We now use the lists in a smarter way. We also introduce the slop mechanism to determine when to stpo looking. When we run out of interesting objects, we continue preparing the walk for another 5 rounds in order to make it less likely that we miss objects in situations with complex graphs.
c5bd70d1	2016-02-23T11:48:30	revwalk: use GITERR_CHECK_ALLOC_BUF
1e5e02b4	2015-10-27T17:26:04	pool: Simplify implementation
c369b379	2015-07-31T16:23:11	Remove extra semicolon outside of a function Without this change, compiling with gcc and pedantic generates warning: ISO C does not allow extra ‘;’ outside of a function.
c332bb70	2015-04-16T19:26:40	Merge pull request #3042 from libgit2/cmn/odd-slowdown revwalk: detect when we're out of interesting commits
a0541695	2015-04-14T03:26:45	revwalk: detect when we're out of interesting commits When walking backwards and marking parents uninteresting, make sure we detect when the list of commits we have left has run out of uninteresting commits so we can stop marking commits as uninteresting. Failing to do so can mean that we walk the whole history marking everything uninteresting, which eats up time, CPU and IO for with useless work. While pre-marking does look for this, we still need to check during the main traversal as there are setups for which pre-marking does not leave enough information in the commits. This can happen if we push a commit and hide its parent.
50fdfe2b	2015-04-08T23:51:49	revwalk: don't insert uninteresting commits into the queue When a commit is first set as unintersting and then pushed, we must take care that we do not put it into the commit list as that makes us return at least that commit (but maybe more) as we've inserted it into the list because we have the assumption that we want anything in the commit list.
b63b76e0	2014-10-12T11:42:31	Reorder some khash declarations Keep the definitions in the headers, while putting the declarations in the C files. Putting the function definitions in headers causes them to be duplicated if you include two headers with them.
392702ee	2015-02-09T23:41:13	allocations: test for overflow of requested size Introduce some helper macros to test integer overflow from arithmetic and set error message appropriately.
753e17b0	2014-11-19T18:42:29	peel: reject bad queries with EINVALIDSPEC There are some combination of objects and target types which we know cannot be fulfilled. Return EINVALIDSPEC for those to signify that there is a mismatch in the user-provided data and what the object model is capable of satisfying. If we start at a tag and in the course of peeling find out that we cannot reach a particular type, we return EPEEL.
d6afda62	2014-10-08T17:17:31	revwalk: clear first-parent flag on reset This should have been included when implementing the feature but was missed.
9b5d6cea	2014-10-08T17:14:48	revwalk: catch no-push and no-hide cases If there have been no pushes, we can immediately return ITEROVER. If there have been no hides, we must not run the uninteresting pre-mark phase, as we do not want to hide anything and this would simply cause us to spend time loading objects.
e7970576	2014-10-08T15:52:11	revwalk: mark uninteresting only up to the common ancestors This introduces a phase at the start of preparing a walk which pre-marks uninteresting commits, but only up to the common ancestors. We do this in a similar way to git, by walking down the history and marking (which is what we used to do), but we keep a time-sorted priority queue of commits and stop marking as soon as there are only uninteresting commits in this queue. This is a similar rule to the one used to find the merge-base. As we keep inserting commits regardless of the uninteresting bit, if there are only uninteresting commits in the queue, it means we've run out of interesting commits in our walk, so we can stop. The old mark_unintesting() logic is still in place, but that stops walking if it finds an already-uninteresting commit, so it will stop on the ones we've pre-marked; but keeping it allows us to also hide those that are hidden via the callback.
ad66bf88	2014-10-08T10:45:47	revwalk: keep a single list of user inputs The old separation was due to the old merge-base finding, so it's no longer necessary.
42835aa6	2014-10-08T10:24:06	revwalk: clear the flags on reset These store merge-base information which is only valid for a single run.
9746b36c	2014-07-24T16:46:59	revwalk: remove preallocation of the uninteresting commits Preallocating two commits doesn't make much sense as leaving allocation to the first array usage will allocate a sensible size with room for growth. This preallocation has also been hiding issues with strict aliasing in the tests, as we have fairly simple histories and never trigger the growth.
f9a97667	2014-06-11T00:06:44	revwalk: more sensible array handling Instead of using a sentinel empty value to detect the last commit, let's check for when we get a NULL from popping the stack, which lets us know when we're done. The current code causes us to read uninitialized data, although only on RHEL/CentOS 6 in release mode. This is a readability win overall.
3bc3d797	2014-03-31T15:15:32	No need to find merge base.
7ca1584b	2014-03-11T11:49:19	Conforming to libgit2 coding style.
46e4d82d	2014-03-10T16:21:56	Remove unused push_cb_data
892aa808	2014-03-10T12:00:33	Callback to hide commits in revision walker.
704b55cc	2014-03-20T20:24:11	revwalk: don't try to find merge bases when there can be none As a way to speed up the cases where we need to hide some commits, we find out what the merge bases are so we know to stop marking commits as uninteresting and avoid walking down a potentially very large amount of commits which we will never see. There are however two oversights in current code. The merge-base finding algorithm fails to recognize that if it is only given one commit, there can be no merge base. It instead walks down the whole ancestor chain needlessly. Make it return an empty list immediately in this situation. The revwalk does not know whether the user has asked to hide any commits at all. In situation where the user pushes multiple commits but doesn't hide any, the above fix wouldn't do the trick. Keep track of whether the user wants to hide any commits and only run the merge-base finding algorithm when it's needed.
c4ee3b54	2014-02-07T18:32:06	Merge pull request #2100 from libgit2/rb/update-pqueue Replace priority queue code with implementation from hashsig
af817202	2014-02-01T15:29:16	revwalk: remove usage of foreach
d465e4e9	2014-02-01T15:19:13	revwalk: ignore wrong object type in glob pushes Pushing a whole namespace can cause us to attempt to push non-committish objects. Catch this situation and special-case it for ignoring this.
f61272e0	2014-02-01T12:51:36	revwalk: accept committish objects Let the user push committish objects and peel them to figure out which commit to push to our queue. This is for convenience and for allowing uses of git_revwalk_push_glob(w, "tags") with annotated tags.
882c7742	2014-02-04T10:01:37	Convert pqueue to just be a git_vector This updates the git_pqueue to simply be a set of specialized init/insert/pop functions on a git_vector. To preserve the pqueue feature of having a fixed size heap, I converted the "sorted" field in git_vectors to a more general "flags" field so that pqueue could mix in it's own flag. This had a bunch of ramifications because a number of places were directly looking at the vector "sorted" field - I added a couple new git_vector helpers (is_sorted, set_sorted) so the specific representation of this information could be abstracted.
4075e060	2014-02-03T21:02:08	Replace pqueue with code from hashsig heap I accidentally wrote a separate priority queue implementation when I was working on file rename detection as part of the file hash signature calculation code. To simplify licensing terms, I just adapted that to a general purpose priority queue and replace the old priority queue implementation that was borrowed from elsewhere. This also removes parts of the COPYING document that no longer apply to libgit2.
25e0b157	2013-12-06T15:07:57	Remove converting user error to GIT_EUSER This changes the behavior of callbacks so that the callback error code is not converted into GIT_EUSER and instead we propagate the return value through to the caller. Instead of using the giterr_capture and giterr_restore functions, we now rely on all functions to pass back the return value from a callback. To avoid having a return value with no error message, the user can call the public giterr_set_str or some such function to set an error message. There is a new helper 'giterr_set_callback' that functions can invoke after making a callback which ensures that some error message was set in case the callback did not set one. In places where the sign of the callback return value is meaningful (e.g. positive to skip, negative to abort), only the negative values are returned back to the caller, obviously, since the other values allow for continuing the loop. The hardest parts of this were in the checkout code where positive return values were overloaded as meaningful values for checkout. I fixed this by adding an output parameter to many of the internal checkout functions and removing the overload. This added some code, but it is probably a better implementation. There is some funkiness in the network code where user provided callbacks could be returning a positive or a negative value and we want to rely on that to cancel the loop. There are still a couple places where an user error might get turned into GIT_EUSER there, I think, though none exercised by the tests.
dab89f9b	2013-12-04T21:22:57	Further EUSER and error propagation fixes This continues auditing all the places where GIT_EUSER is being returned and making sure to clear any existing error using the new giterr_user_cancel helper. As a result, places that relied on intercepting GIT_EUSER but having the old error preserved also needed to be cleaned up to correctly stash and then retrieve the actual error. Additionally, as I encountered places where error codes were not being propagated correctly, I tried to fix them up. A number of those fixes are included in the this commit as well.
106c12f1	2013-09-23T13:31:15	Remove regex usage from places that don't need it In revwalk, we are doing a very simple check to see if a string contains wildcard characters, so a full regular expression match is not needed. In remote listing, now that we have git_config_foreach_match with full regular expression matching, we can take advantage of that and eliminate the regex here, replacing it with much simpler string manipulation.
15f7b9b8	2013-09-08T00:52:26	revwalk: allow simplifying by first-parent When enabled, only the first parent of each commit will be queued, enabling a simple way of using first-parent simplification.
fb23d05f	2013-08-17T07:58:55	revwalk: make mark_unintersting use a loop Using a recursive function can blow the stack when dealing with long histories. Use a loop instead to limit the call chain depth. This fixes #1223.
2b562c3a	2013-05-04T16:32:58	refs: remove the OID/SYMBOLIC filtering Nobody should ever be using anything other than ALL at this level, so remove the option altogether. As part of this, git_reference_foreach_glob is now implemented in the frontend using an iterator. Backends will later regain the ability of doing the glob filtering in the backend.
cbda09d0	2013-04-15T23:40:46	git_revision -> git_revspec
36c2dfed	2013-04-15T23:32:40	Is this crazy?
299a224b	2013-04-15T12:00:04	Change git_revparse to output git_object pointers This will probably prevent many lookup/free operations in calling code.
1aa21fe3	2013-04-09T05:03:51	Deprecate git_revparse_single and _rangelike
af079d8b	2013-03-03T20:54:23	revwalk: Parse revision ranges All the hard work is already in revparse. Signed-off-by: Greg Price <price@mit.edu>
359fc2d2	2013-01-08T17:07:25	update copyrights
d5e44d84	2012-11-29T17:02:27	Fix function name and add real error check `revwalk.h:commit_lookup()` -> `git_revwalk__commit_lookup()` and make `git_commit_list_parse()` do real error checking that the item in the list is an actual commit object. Also fixed an apparent typo in a test name.
4ff192d3	2012-11-26T19:47:47	Move merge functions to merge.c In so doing, promote commit_list to git_commit_list, with its own internal API header.
2508cc66	2012-11-18T21:38:08	Rename ref and reflog apis for consistency
8060cdc9	2012-09-27T14:59:43	revwalk: fix off-by-one error Fixes #921.
857323d4	2012-09-09T15:53:57	git_mergebase: Constness-Fix for consistency
f335ecd6	2012-08-30T14:24:16	Diff iterators This refactors the diff output code so that an iterator object can be used to traverse and generate the diffs, instead of just the `foreach()` style with callbacks. The code has been rearranged so that the two styles can still share most functions. This also replaces `GIT_REVWALKOVER` with `GIT_ITEROVER` and uses that as a common error code for marking the end of iteration when using a iterator style of object.
4e323ef0	2012-08-27T10:51:01	revwalk: refuse push of non-commit objects Check the type of the pushed object immediately instead of starting the walk and failing in between.
118cf57d	2012-07-04T16:06:07	revwalk: relax the parsing of the commit time
11634346	2012-06-22T17:04:16	revwalk: make git_revwalk_(push\|hide)_glob() leverage git_reference_foreach_glob()
31eed56b	2012-06-18T17:36:14	Merge pull request #753 from nulltoken/topic/merge-base-many Expose git_merge_base_many()
471fa05e	2012-06-11T15:38:33	Fix fragile commit parsing in revwalk
b46bdb22	2012-05-25T16:28:53	merge: Expose git_merge_base_many()
904b67e6	2012-05-18T01:48:50	errors: Rename error codes
e172cf08	2012-05-18T01:21:06	errors: Rename the generic return codes
0b86fdf9	2012-05-15T17:03:07	really reset walker with git_revwalk_reset From the description of git_revwalk_reset in revwalk.h the function should clear all pushed and hidden commits, and leave the walker in a blank state (just like at creation). Apparently everything gets reseted appart of pushed commits (walk->one and walk->twos) This fix should reset the walker properly.
3fbcac89	2012-05-02T19:56:38	Remove old and unused error codes
821f6bc7	2012-04-26T13:04:54	Fix Win32 warnings
3fc5c65d	2012-04-25T15:24:05	Merge pull request #642 from arrbee/mem-pools Memory pools and khash hashtables
c2b67043	2012-04-25T15:20:28	Rename git_khash_str to git_strmap, etc. This renamed `git_khash_str` to `git_strmap`, `git_hash_oid` to `git_oidmap`, and deletes `git_hashtable` from the tree, plus adds unit tests for `git_strmap`.
01fed0a8	2012-04-25T10:36:01	Convert hashtable usage over to khash This updates khash.h with some extra features (like error checking on allocations, ability to use wrapped malloc, foreach calls, etc), creates two high-level wrappers around khash: `git_khash_str` and `git_khash_oid` for string-to-void-ptr and oid-to-void-ptr tables, then converts all of the old usage of `git_hashtable` over to use these new hashtables. For `git_khash_str`, I've tried to create a set of macros that yield an API not too unlike the old `git_hashtable` API. Since the oid hashtable is only used in one file, I haven't bother to set up all those macros and just use the khash APIs directly for now.
da3b391c	2012-04-18T10:57:08	Convert revwalk to use git_pool This removes the custom paged allocator from revwalk and replaces it with a `git_pool`.
2e3a0055	2012-04-16T11:58:46	revwalk: return GIT_EREVWALKER earlier if no references were pushed In the case that walk->one is NULL, we know that we have no positive references, so we already know that the revwalk is over.
26515e73	2012-04-23T10:06:31	Rename to git_reference_name_to_oid
44ef8b1b	2012-04-13T13:00:10	Fix warnings on 64-bit windows builds This fixes all the warnings on win64 except those in deps, which come from the regex code.
f201d613	2012-04-13T10:33:14	Add git_reference_lookup_oid and lookup_resolved Adds a new public reference function `git_reference_lookup_oid` that directly resolved a reference name to an OID without returning the intermediate `git_reference` object (hence, no free needed). Internally, this adds a `git_reference_lookup_resolved` function that combines looking up and resolving a reference. This allows us to be more efficient with memory reallocation. The existing `git_reference_lookup` and `git_reference_resolve` are reimplmented on top of the new utility and a few places in the code are changed to use one of the two new functions.
eb8117b8	2012-04-12T20:25:07	error-handling: revwalk
f9e4bfa3	2012-03-04T03:00:35	revwalk: use a priority queue for calculating merge bases As parents are older than their children, we're appending to the commit list most of the time, which makes an ordered linked list quite inefficient. While we're there, don't sort the results list in the main loop, as we're sorting them afterwards and it creates extra work.
bf787bd8	2012-04-08T18:56:50	Move git_merge_base() to is own header and document it
2c4ef1dd	2012-03-03T16:43:24	revwalk: use merge bases to speed up processing There is no need walk down the parents of a merge base to mark them as uninteresting because we'll never see them. Calculate the merge bases in prepare_walk() so mark_uninteresting() can stop at a merge base instead of walking all the way to the root.
de7ab85d	2012-03-03T03:31:51	Implement git_merge_base() It's implemented in revwalk.c so it has access to the revision walker's commit cache and related functions. The algorithm is the one used by git, modified so it fits better with the library's functions.
081d2291	2012-03-03T04:46:21	revwalk: don't assume malloc succeeds
06b9d915	2012-02-28T02:19:57	revwalk: allow pushing/hiding a reference by name The code was already there, so factor it out and let users push an OID by giving it a reference name. Only refs to commits are supported. Annotated tags will throw an error.

12a1790d

2018-09-17T14:49:46

revwalk: only check the first commit in the list for an earlier timestamp This is not a big deal, but it does make us match git more closely by checking only the first. The lists are sorted already, so there should be no functional difference other than removing a possible check from every iteration in the loop.

46f35127

2018-09-17T14:39:58

revwalk: use the max value for a signed integer When porting, we overlooked that the difference between git's and our's time representation and copied their way of getting the max value. Unfortunately git was using unsigned integers, so `~0ll` does correspond to their max value, whereas for us it corresponds to `-1`. This means that we always consider the last date to be smaller than the current commit's and always think commits are interesting. Change the initial value to the macro that gives us the maximum value on each platform so we can accurately consider commits interesting or not.

aa8cb586

2018-08-21T01:12:11

revwalk: The left operand of '<' is a garbage value At line 594, we do this : if (error < 0) return error; but if nothing was pushed in a GIT_SORT_TIME revwalk, we'd return uninitialized stack data.

a4ffbae4

2018-07-29T11:46:05

revwalk: remove tautologic condition for hiding a commit The contition cannot be reached with `commit->uninteresting` being true: either a `break` or a `continue` statement will be hit in this case.

4fd81c53

2018-06-18T19:43:53

Clear revwalk sorting when resetting Currently we fail to clear the sorting flag for revwalks when resetting. This caused a poor interaction with the limited flag during a recent patch. This patch clears the revwalk sorting flag and causes it to no longer persist over resets.

cc9c9522

2018-06-18T12:10:17

Merge pull request #4606 from libgit2/cmn/revwalk-iteration revwalk: avoid walking the entire history when output is unsorted

ff98fec0

2018-06-18T10:25:07

revwalk: formatting updates

ecf4f33a

2018-02-08T11:14:48

Convert usage of `git_buf_free` to new `git_buf_dispose`

54fd80e3

2018-04-12T13:32:27

revwalk: fix uninteresting revs sometimes not limiting graphwalk When we want to limit our graphwalk, we use the heuristic of checking whether the newest limiting (uninteresting) revision is newer than the oldest interesting revision. We do so by inspecting whether the first item's commit time of the user-supplied list of revisions is newer than the last added interesting revision. This is wrong though, as the user supplied list is in no way guaranteed to be sorted by increasing commit dates. This could lead us to abort the revwalk early before applying all relevant limiting revisions, outputting revisions which should in fact have been hidden. Fix the heuristic by instead checking whether _any_ of the limiting commits was made earlier than the last interesting commit. Add a test.

ef682410

2018-04-11T17:52:51

revwalk: remove one useless layer of functions We don't currently need to have anything that's different between `get_revision` and `get_one_revision` so let's just remove the inner function and make the code more straightforward.

2a6d0956

2018-04-01T14:01:52

revwalk: avoid walking the entire history when output is unsorted As part of reducing our divergence from git, its code for revwalk was ported into our codebase. A detail about when to limit the list was lost and we ended up always calling that code. Limiting the list means performing the walk and creating the final list of commits to be output during the preparation stage. This is unavoidable when sorting and when there are negative refs. We did this even when asked for unsorted output with no negative refs, which you might do to retrieve something like the "last 10 commits on HEAD" for a nominally unsorted meaning of "last". This commit adds and sets a flag indicating when we do need to limit the list, letting us avoid doing so when we can. The previously mentioned query thus no longer loads the entire history of the project during the prepare stage, but loads it iteratively during the walk.

0c7f49dd

2017-06-30T13:39:01

Make sure to always include "common.h" first Next to including several files, our "common.h" header also declares various macros which are then used throughout the project. As such, we have to make sure to always include this file first in all implementation files. Otherwise, we might encounter problems or even silent behavioural differences due to macros or defines not being defined as they should be. So in fact, our header and implementation files should make sure to always include "common.h" first. This commit does so by establishing a common include pattern. Header files inside of "src" will now always include "common.h" as its first other file, separated by a newline from all the other includes to make it stand out as special. There are two cases for the implementation files. If they do have a matching header file, they will always include this one first, leading to "common.h" being transitively included as first file. If they do not have a matching header file, they instead include "common.h" as first file themselves. This fixes the outlined problems and will become our standard practice for header and source files inside of the "src/" from now on.

c11c08a5

2017-03-09T14:01:10

Skip uninteresting commits in revwalk timesort iterator Fixes #4099

0d716905

2017-01-27T15:23:15

oidmap: remove GIT__USE_OIDMAP macro

85d2748c

2017-01-27T14:05:10

khash: avoid using `kh_key`/`kh_val` as lvalue

f31cb45a

2017-01-25T15:31:12

khash: avoid using `kh_put` directly

cb18386f

2017-01-25T14:26:58

khash: avoid using `kh_val`/`kh_value` directly

a853c527

2017-01-25T14:14:32

khash: avoid using `kh_get` directly

64e46dc3

2017-01-25T14:14:12

khash: avoid using `kh_end` directly

9694d9ba

2017-01-25T14:09:17

khash: avoid using `kh_foreach`/`kh_foreach_value` directly

909d5494

2016-12-29T12:25:15

giterr_set: consistent error messages Error messages should be sentence fragments, and therefore: 1. Should not begin with a capital letter, 2. Should not conclude with punctuation, and 3. Should not end a sentence and begin a new one

013ecb4f

2016-11-25T15:00:50

revwalk: do not re-declare `commit` variable

fedc05c8

2016-10-06T18:13:34

revwalk: don't show commits that become uninteresting after being enqueued When we read from the list which `limit_list()` gives us, we need to check that the commit is still interesting, as it might have become uninteresting after it was added to the list.

82d4c0e6

2016-10-05T12:55:53

revwalk: update the description for the default sorting It changed from implementation-defined to git's default sorting, as there are systems (e.g. rebase) which depend on this order. Also specify more explicitly how you can get git's "date-order".

ea1ceb7f

2016-10-05T12:23:26

revwalk: remove a useless enqueueing phase for topological and default sorting After `limit_list()` we already have the list in time-sorted order, which is what we want in the "default" case. Enqueueing into the "unsorted" list would just reverse it, and the topological sort will do its own sorting if it needs to.

9db367bf

2016-09-27T16:14:42

revwalk: get rid of obsolete marking code We've now moved to code that's closer to git and produces the output during the preparation phase, so we no longer process the commits as part of generating the output. This makes a chunk of code redundant, as we're simply short-circuiting it by detecting we've processed the commits alrady.

e93b7e32

2016-09-27T13:35:48

revwalk: style change Change the condition for returning 0 more in line with that we write elsewhere in the library.

48c64362

2016-09-27T11:59:24

revwalk: port over the topological sorting After porting over the commit hiding and selection we were still left with mistmaching output due to the topologial sort. This ports the topological sorting code to make us match with our equivalent of `--date-order` and `--topo-order` against the output from `rev-list`.

6708618c

2016-07-21T01:24:12

revwalk: get closer to git We had some home-grown logic to figure out which objects to show during the revision walk, but it was rather inefficient, looking over the same list multiple times to figure out when we had run out of interesting commits. We now use the lists in a smarter way. We also introduce the slop mechanism to determine when to stpo looking. When we run out of interesting objects, we continue preparing the walk for another 5 rounds in order to make it less likely that we miss objects in situations with complex graphs.

c5bd70d1

2016-02-23T11:48:30

revwalk: use GITERR_CHECK_ALLOC_BUF

1e5e02b4

2015-10-27T17:26:04

pool: Simplify implementation

c369b379

2015-07-31T16:23:11

Remove extra semicolon outside of a function Without this change, compiling with gcc and pedantic generates warning: ISO C does not allow extra ‘;’ outside of a function.

c332bb70

2015-04-16T19:26:40

Merge pull request #3042 from libgit2/cmn/odd-slowdown revwalk: detect when we're out of interesting commits

a0541695

2015-04-14T03:26:45

revwalk: detect when we're out of interesting commits When walking backwards and marking parents uninteresting, make sure we detect when the list of commits we have left has run out of uninteresting commits so we can stop marking commits as uninteresting. Failing to do so can mean that we walk the whole history marking everything uninteresting, which eats up time, CPU and IO for with useless work. While pre-marking does look for this, we still need to check during the main traversal as there are setups for which pre-marking does not leave enough information in the commits. This can happen if we push a commit and hide its parent.

50fdfe2b

2015-04-08T23:51:49

revwalk: don't insert uninteresting commits into the queue When a commit is first set as unintersting and then pushed, we must take care that we do not put it into the commit list as that makes us return at least that commit (but maybe more) as we've inserted it into the list because we have the assumption that we want anything in the commit list.

b63b76e0

2014-10-12T11:42:31

Reorder some khash declarations Keep the definitions in the headers, while putting the declarations in the C files. Putting the function definitions in headers causes them to be duplicated if you include two headers with them.

392702ee

2015-02-09T23:41:13

allocations: test for overflow of requested size Introduce some helper macros to test integer overflow from arithmetic and set error message appropriately.

753e17b0

2014-11-19T18:42:29

peel: reject bad queries with EINVALIDSPEC There are some combination of objects and target types which we know cannot be fulfilled. Return EINVALIDSPEC for those to signify that there is a mismatch in the user-provided data and what the object model is capable of satisfying. If we start at a tag and in the course of peeling find out that we cannot reach a particular type, we return EPEEL.

d6afda62

2014-10-08T17:17:31

revwalk: clear first-parent flag on reset This should have been included when implementing the feature but was missed.

9b5d6cea

2014-10-08T17:14:48

revwalk: catch no-push and no-hide cases If there have been no pushes, we can immediately return ITEROVER. If there have been no hides, we must not run the uninteresting pre-mark phase, as we do not want to hide anything and this would simply cause us to spend time loading objects.

e7970576

2014-10-08T15:52:11

revwalk: mark uninteresting only up to the common ancestors This introduces a phase at the start of preparing a walk which pre-marks uninteresting commits, but only up to the common ancestors. We do this in a similar way to git, by walking down the history and marking (which is what we used to do), but we keep a time-sorted priority queue of commits and stop marking as soon as there are only uninteresting commits in this queue. This is a similar rule to the one used to find the merge-base. As we keep inserting commits regardless of the uninteresting bit, if there are only uninteresting commits in the queue, it means we've run out of interesting commits in our walk, so we can stop. The old mark_unintesting() logic is still in place, but that stops walking if it finds an already-uninteresting commit, so it will stop on the ones we've pre-marked; but keeping it allows us to also hide those that are hidden via the callback.

ad66bf88

2014-10-08T10:45:47

revwalk: keep a single list of user inputs The old separation was due to the old merge-base finding, so it's no longer necessary.

42835aa6

2014-10-08T10:24:06

revwalk: clear the flags on reset These store merge-base information which is only valid for a single run.

9746b36c

2014-07-24T16:46:59

revwalk: remove preallocation of the uninteresting commits Preallocating two commits doesn't make much sense as leaving allocation to the first array usage will allocate a sensible size with room for growth. This preallocation has also been hiding issues with strict aliasing in the tests, as we have fairly simple histories and never trigger the growth.

f9a97667

2014-06-11T00:06:44

revwalk: more sensible array handling Instead of using a sentinel empty value to detect the last commit, let's check for when we get a NULL from popping the stack, which lets us know when we're done. The current code causes us to read uninitialized data, although only on RHEL/CentOS 6 in release mode. This is a readability win overall.

3bc3d797

2014-03-31T15:15:32

No need to find merge base.

7ca1584b

2014-03-11T11:49:19

Conforming to libgit2 coding style.

46e4d82d

2014-03-10T16:21:56

Remove unused push_cb_data

892aa808

2014-03-10T12:00:33

Callback to hide commits in revision walker.

704b55cc

2014-03-20T20:24:11

revwalk: don't try to find merge bases when there can be none As a way to speed up the cases where we need to hide some commits, we find out what the merge bases are so we know to stop marking commits as uninteresting and avoid walking down a potentially very large amount of commits which we will never see. There are however two oversights in current code. The merge-base finding algorithm fails to recognize that if it is only given one commit, there can be no merge base. It instead walks down the whole ancestor chain needlessly. Make it return an empty list immediately in this situation. The revwalk does not know whether the user has asked to hide any commits at all. In situation where the user pushes multiple commits but doesn't hide any, the above fix wouldn't do the trick. Keep track of whether the user wants to hide any commits and only run the merge-base finding algorithm when it's needed.

c4ee3b54

2014-02-07T18:32:06

Merge pull request #2100 from libgit2/rb/update-pqueue Replace priority queue code with implementation from hashsig

af817202

2014-02-01T15:29:16

revwalk: remove usage of foreach

d465e4e9

2014-02-01T15:19:13

revwalk: ignore wrong object type in glob pushes Pushing a whole namespace can cause us to attempt to push non-committish objects. Catch this situation and special-case it for ignoring this.

f61272e0

2014-02-01T12:51:36

revwalk: accept committish objects Let the user push committish objects and peel them to figure out which commit to push to our queue. This is for convenience and for allowing uses of git_revwalk_push_glob(w, "tags") with annotated tags.

882c7742

2014-02-04T10:01:37

Convert pqueue to just be a git_vector This updates the git_pqueue to simply be a set of specialized init/insert/pop functions on a git_vector. To preserve the pqueue feature of having a fixed size heap, I converted the "sorted" field in git_vectors to a more general "flags" field so that pqueue could mix in it's own flag. This had a bunch of ramifications because a number of places were directly looking at the vector "sorted" field - I added a couple new git_vector helpers (is_sorted, set_sorted) so the specific representation of this information could be abstracted.

4075e060

2014-02-03T21:02:08

Replace pqueue with code from hashsig heap I accidentally wrote a separate priority queue implementation when I was working on file rename detection as part of the file hash signature calculation code. To simplify licensing terms, I just adapted that to a general purpose priority queue and replace the old priority queue implementation that was borrowed from elsewhere. This also removes parts of the COPYING document that no longer apply to libgit2.

25e0b157

2013-12-06T15:07:57

Remove converting user error to GIT_EUSER This changes the behavior of callbacks so that the callback error code is not converted into GIT_EUSER and instead we propagate the return value through to the caller. Instead of using the giterr_capture and giterr_restore functions, we now rely on all functions to pass back the return value from a callback. To avoid having a return value with no error message, the user can call the public giterr_set_str or some such function to set an error message. There is a new helper 'giterr_set_callback' that functions can invoke after making a callback which ensures that some error message was set in case the callback did not set one. In places where the sign of the callback return value is meaningful (e.g. positive to skip, negative to abort), only the negative values are returned back to the caller, obviously, since the other values allow for continuing the loop. The hardest parts of this were in the checkout code where positive return values were overloaded as meaningful values for checkout. I fixed this by adding an output parameter to many of the internal checkout functions and removing the overload. This added some code, but it is probably a better implementation. There is some funkiness in the network code where user provided callbacks could be returning a positive or a negative value and we want to rely on that to cancel the loop. There are still a couple places where an user error might get turned into GIT_EUSER there, I think, though none exercised by the tests.

dab89f9b

2013-12-04T21:22:57

Further EUSER and error propagation fixes This continues auditing all the places where GIT_EUSER is being returned and making sure to clear any existing error using the new giterr_user_cancel helper. As a result, places that relied on intercepting GIT_EUSER but having the old error preserved also needed to be cleaned up to correctly stash and then retrieve the actual error. Additionally, as I encountered places where error codes were not being propagated correctly, I tried to fix them up. A number of those fixes are included in the this commit as well.

106c12f1

2013-09-23T13:31:15

Remove regex usage from places that don't need it In revwalk, we are doing a very simple check to see if a string contains wildcard characters, so a full regular expression match is not needed. In remote listing, now that we have git_config_foreach_match with full regular expression matching, we can take advantage of that and eliminate the regex here, replacing it with much simpler string manipulation.

15f7b9b8

2013-09-08T00:52:26

revwalk: allow simplifying by first-parent When enabled, only the first parent of each commit will be queued, enabling a simple way of using first-parent simplification.

fb23d05f

2013-08-17T07:58:55

revwalk: make mark_unintersting use a loop Using a recursive function can blow the stack when dealing with long histories. Use a loop instead to limit the call chain depth. This fixes #1223.

2b562c3a

2013-05-04T16:32:58

refs: remove the OID/SYMBOLIC filtering Nobody should ever be using anything other than ALL at this level, so remove the option altogether. As part of this, git_reference_foreach_glob is now implemented in the frontend using an iterator. Backends will later regain the ability of doing the glob filtering in the backend.

cbda09d0

2013-04-15T23:40:46

git_revision -> git_revspec

36c2dfed

2013-04-15T23:32:40

Is this crazy?

299a224b

2013-04-15T12:00:04

Change git_revparse to output git_object pointers This will probably prevent many lookup/free operations in calling code.

1aa21fe3

2013-04-09T05:03:51

Deprecate git_revparse_single and _rangelike

af079d8b

2013-03-03T20:54:23

revwalk: Parse revision ranges All the hard work is already in revparse. Signed-off-by: Greg Price <price@mit.edu>

359fc2d2

2013-01-08T17:07:25

update copyrights

d5e44d84

2012-11-29T17:02:27

Fix function name and add real error check `revwalk.h:commit_lookup()` -> `git_revwalk__commit_lookup()` and make `git_commit_list_parse()` do real error checking that the item in the list is an actual commit object. Also fixed an apparent typo in a test name.

4ff192d3

2012-11-26T19:47:47

Move merge functions to merge.c In so doing, promote commit_list to git_commit_list, with its own internal API header.

2508cc66

2012-11-18T21:38:08

Rename ref and reflog apis for consistency

8060cdc9

2012-09-27T14:59:43

revwalk: fix off-by-one error Fixes #921.

857323d4

2012-09-09T15:53:57

git_mergebase: Constness-Fix for consistency

f335ecd6

2012-08-30T14:24:16

Diff iterators This refactors the diff output code so that an iterator object can be used to traverse and generate the diffs, instead of just the `foreach()` style with callbacks. The code has been rearranged so that the two styles can still share most functions. This also replaces `GIT_REVWALKOVER` with `GIT_ITEROVER` and uses that as a common error code for marking the end of iteration when using a iterator style of object.

4e323ef0

2012-08-27T10:51:01

revwalk: refuse push of non-commit objects Check the type of the pushed object immediately instead of starting the walk and failing in between.

118cf57d

2012-07-04T16:06:07

revwalk: relax the parsing of the commit time

11634346

2012-06-22T17:04:16

revwalk: make git_revwalk_(push|hide)_glob() leverage git_reference_foreach_glob()

31eed56b

2012-06-18T17:36:14

Merge pull request #753 from nulltoken/topic/merge-base-many Expose git_merge_base_many()

471fa05e

2012-06-11T15:38:33

Fix fragile commit parsing in revwalk

b46bdb22

2012-05-25T16:28:53

merge: Expose git_merge_base_many()

904b67e6

2012-05-18T01:48:50

errors: Rename error codes

e172cf08

2012-05-18T01:21:06

errors: Rename the generic return codes

0b86fdf9

2012-05-15T17:03:07

really reset walker with git_revwalk_reset From the description of git_revwalk_reset in revwalk.h the function should clear all pushed and hidden commits, and leave the walker in a blank state (just like at creation). Apparently everything gets reseted appart of pushed commits (walk->one and walk->twos) This fix should reset the walker properly.

3fbcac89

2012-05-02T19:56:38

Remove old and unused error codes

821f6bc7

2012-04-26T13:04:54

Fix Win32 warnings

3fc5c65d

2012-04-25T15:24:05

Merge pull request #642 from arrbee/mem-pools Memory pools and khash hashtables

c2b67043

2012-04-25T15:20:28

Rename git_khash_str to git_strmap, etc. This renamed `git_khash_str` to `git_strmap`, `git_hash_oid` to `git_oidmap`, and deletes `git_hashtable` from the tree, plus adds unit tests for `git_strmap`.

01fed0a8

2012-04-25T10:36:01

Convert hashtable usage over to khash This updates khash.h with some extra features (like error checking on allocations, ability to use wrapped malloc, foreach calls, etc), creates two high-level wrappers around khash: `git_khash_str` and `git_khash_oid` for string-to-void-ptr and oid-to-void-ptr tables, then converts all of the old usage of `git_hashtable` over to use these new hashtables. For `git_khash_str`, I've tried to create a set of macros that yield an API not too unlike the old `git_hashtable` API. Since the oid hashtable is only used in one file, I haven't bother to set up all those macros and just use the khash APIs directly for now.

da3b391c

2012-04-18T10:57:08

Convert revwalk to use git_pool This removes the custom paged allocator from revwalk and replaces it with a `git_pool`.

2e3a0055

2012-04-16T11:58:46

revwalk: return GIT_EREVWALKER earlier if no references were pushed In the case that walk->one is NULL, we know that we have no positive references, so we already know that the revwalk is over.

26515e73

2012-04-23T10:06:31

Rename to git_reference_name_to_oid

44ef8b1b

2012-04-13T13:00:10

Fix warnings on 64-bit windows builds This fixes all the warnings on win64 except those in deps, which come from the regex code.

f201d613

2012-04-13T10:33:14

Add git_reference_lookup_oid and lookup_resolved Adds a new public reference function `git_reference_lookup_oid` that directly resolved a reference name to an OID without returning the intermediate `git_reference` object (hence, no free needed). Internally, this adds a `git_reference_lookup_resolved` function that combines looking up and resolving a reference. This allows us to be more efficient with memory reallocation. The existing `git_reference_lookup` and `git_reference_resolve` are reimplmented on top of the new utility and a few places in the code are changed to use one of the two new functions.

eb8117b8

2012-04-12T20:25:07

error-handling: revwalk

f9e4bfa3

2012-03-04T03:00:35

revwalk: use a priority queue for calculating merge bases As parents are older than their children, we're appending to the commit list most of the time, which makes an ordered linked list quite inefficient. While we're there, don't sort the results list in the main loop, as we're sorting them afterwards and it creates extra work.

bf787bd8

2012-04-08T18:56:50

Move git_merge_base() to is own header and document it

2c4ef1dd

2012-03-03T16:43:24

revwalk: use merge bases to speed up processing There is no need walk down the parents of a merge base to mark them as uninteresting because we'll never see them. Calculate the merge bases in prepare_walk() so mark_uninteresting() can stop at a merge base instead of walking all the way to the root.

de7ab85d

2012-03-03T03:31:51

Implement git_merge_base() It's implemented in revwalk.c so it has access to the revision walker's commit cache and related functions. The algorithm is the one used by git, modified so it fits better with the library's functions.

081d2291

2012-03-03T04:46:21

revwalk: don't assume malloc succeeds

06b9d915

2012-02-28T02:19:57

revwalk: allow pushing/hiding a reference by name The code was already there, so factor it out and let users push an OID by giving it a reference name. Only refs to commits are supported. Annotated tags will throw an error.

thodg/libgit2/src/revwalk.c

src/revwalk.c

Log