|
04de614b
|
2017-06-04T19:03:07
|
|
Merge pull request #4243 from pks-t/pks/submodule-workdir
Submodule working directory
|
|
e694e4e9
|
2017-05-20T14:17:36
|
|
Merge pull request #4174 from libgit2/ethomson/set_head_to_tag
git_repository_set_head: use tag name in reflog
|
|
2696c5c3
|
2017-05-19T09:21:17
|
|
repository: make check if repo is a worktree more strict
To determine if a repository is a worktree or not, we currently check
for the existence of a "gitdir" file inside of the repository's gitdir.
While this is sufficient for non-broken repositories, we have at least
one case of a subtly broken repository where there exists a gitdir file
inside of a gitmodule. This will cause us to misidentify the submodule
as a worktree.
While this is not really a fault of ours, we can do better here by
observing that a repository can only ever be a worktree iff its common
directory and dotgit directory are different. This allows us to make our
check whether a repo is a worktree or not more strict by doing a simple
string comparison of these two directories. This will also allow us to
do the right thing in the above case of a broken repository, as for
submodules these directories will be the same. At the same time, this
allows us to skip the `stat` check for the "gitdir" file for most
repositories.
|
|
|
9f9fd05f
|
2017-05-19T08:59:46
|
|
repository: factor out worktree check
The check whether a repository is a worktree or not is currently done
inside of `git_repository_open_ext`. As we want to extend this function
later on, pull it out into its own function `repo_is_worktree` to ease
working on it.
|
|
|
32841973
|
2017-05-19T08:38:47
|
|
repository: improve parameter names for `find_repo`
The out-parameters of `find_repo` containing found paths of a repository
are a tad confusing, as they are not as obvious as they could be. Rename
them like following to ease reading the code:
- `repo_path` -> `gitdir_path`
- `parent_path` -> `workdir_path`
- `link_path` -> `gitlink_path`
- `common_path` -> `commondir_path`
|
|
|
57121a23
|
2017-05-19T08:34:32
|
|
repository: clear out-parameter instead of freeing it
The `path` out-parameter of `find_repo` is being sanitized initially
such that we do not try to append to existing content. The sanitization
is done via `git_buf_free`, though, which forces us to needlessly
reallocate the buffer later in the function. Fix this by using
`git_buf_clear` instead.
|
|
|
be343b88
|
2017-05-01T18:56:55
|
|
worktrees: cleanup some memory leaks
Be sure to clean up looked up references. Free buffers instead of
merely clearing them. Use `git__free` instead of `free`.
|
|
|
74511aa2
|
2017-04-04T18:44:29
|
|
repository: add function to iterate over all HEADs
While we already provide functions to get the current repository's HEAD,
it is quite involved to iterate over HEADs of both the repository and
all linked work trees. This commit implements a function
`git_repository_foreach_head`, which accepts a callback which is then
called for all HEAD files.
|
|
|
3e84aa50
|
2017-04-05T13:47:09
|
|
repository: get worktree HEAD via `git_reference__read_head`
The functions `git_repository_head_for_worktree` and
`git_repository_detached_head_for_worktree` both implement their
own logic to read the HEAD reference file. Use the new function
`git_reference__read_head` instead to unify the code paths.
|
|
|
987f5659
|
2017-04-04T17:12:22
|
|
repository: extract function to get path to a file in a work tree
The function `read_worktree_head` has the logic embedded to construct
the path to `HEAD` in the work tree's git directory, which is quite
useful for other callers. Extract the logic into its own function to
make it reusable by others.
|
|
|
8242cc1a
|
2017-04-04T18:18:45
|
|
repository: set error message if trying to set HEAD to a checked out one
If trying to set the HEAD of a repository to another reference, we have
to check whether this reference is already checked out in another linked
work tree. If it is, we will refuse setting the HEAD and return an
error, but do not set a meaningful error message. Add one.
|
|
|
e86d02f9
|
2017-04-03T00:10:47
|
|
git_repository_set_head: use remote name in reflog
When `git_repository_set_head` is provided a remote reference, update
the reflog with the tag name, like we do with a branch. This helps
consumers match the semantics of `git checkout remote`.
|
|
|
ea3bb5c0
|
2017-03-21T18:12:02
|
|
git_repository_set_head: use tag name in reflog
When `git_repository_set_head` is provided a tag reference, update the
reflog with the tag name, like we do with a branch. This helps
consumers match the semantics of `git checkout tag`.
|
|
1c04a96b
|
2017-02-28T12:29:29
|
|
Honor `core.fsyncObjectFiles`
|
|
|
13c3bc9a
|
2017-01-27T14:32:23
|
|
strmap: remove GIT__USE_STRMAP macro
|
|
|
39abd3ad
|
2016-11-04T13:39:54
|
|
worktree: compute workdir for worktrees opened via their gitdir
When opening a worktree via the gitdir of its parent repository
we fail to correctly set up the worktree's working directory. The
problem here is two-fold: we first fail to see that the gitdir
actually is a gitdir of a working tree and then subsequently
fail to determine the working tree location from the gitdir.
The first problem of not noticing a gitdir belongs to a worktree
can be solved by checking for the existence of a `gitdir` file in
the gitdir. This file points back to the gitlink file located in
the working tree's working directory. As this file only exists
for worktrees, it should be sufficient indication of the gitdir
belonging to a worktree.
The second problem, that is determining the location of the
worktree's working directory, can then be solved by reading the
`gitdir` file in the working directory's gitdir. When we now
resolve relative paths and strip the final `.git` component, we
have the actual worktree's working directory location.
|
|
|
84f56cb0
|
2016-11-04T11:59:52
|
|
repository: rename `path_repository` and `path_gitlink`
The `path_repository` variable is actually confusing to think
about, as it is not always clear what the repository actually is.
It may either be the path to the folder containing worktree and
.git directory, the path to .git itself, a worktree or something
entirely different. Actually, the intent of the variable is to
hold the path to the gitdir, which is either the .git directory
or the bare repository.
Rename the variable to `gitdir` to avoid confusion. While at it,
also rename `path_gitlink` to `gitlink` to improve consistency.
|
|
|
384518d0
|
2015-10-27T14:17:52
|
|
repository: restrict checking out checked out branches
If a branch is already checked out in a working tree we are not
allowed to check out that branch in another repository. Introduce
this restriction when setting a repository's HEAD.
|
|
|
04fb12ab
|
2015-10-27T12:37:51
|
|
worktree: implement functions reading HEAD
Implement `git_repository_head_for_worktree` and
`git_repository_head_detached_for_worktree` for directly accessing a
worktree's HEAD without opening it as a `git_repository` first.
|
|
|
8c8d726e
|
2015-10-21T12:10:30
|
|
worktree: implement `git_repository_open_from_worktree`
Add function `git_repository_open_from_worktree`, which allows to open a
`git_worktree` as repository.
|
|
|
854b5c70
|
2015-10-26T16:21:09
|
|
repository: expose `repo_init_create_head`
Expose the function `repo_init_create_head` as
`git_repository_create_head`.
|
|
|
4292837d
|
2015-09-24T14:37:10
|
|
config: open configuration in commondir
A repository's configuartion file can always be found in the
GIT_COMMON_DIR, which has been newly introduced. For normal
repositories this does change nothing, but for working trees this
change allows to access the shared configuration file.
|
|
|
79ab3ef6
|
2015-10-15T15:58:05
|
|
repository: introduce is_worktree variable
|
|
|
c5f3da96
|
2016-11-11T14:36:43
|
|
repository: use `git_repository_item_path`
The recent introduction of the commondir variable of a repository
requires callers to distinguish whether their files are part of
the dot-git directory or the common directory shared between
multpile worktrees. In order to take the burden from callers and
unify knowledge on which files reside where, the
`git_repository_item_path` function has been introduced which
encapsulate this knowledge.
Modify most existing callers of `git_repository_path` to use
`git_repository_item_path` instead, thus making them implicitly
aware of the common directory.
|
|
|
cb3269c9
|
2016-11-11T13:46:59
|
|
repository: add function to retrieve paths for repo items
|
|
|
c09fd54e
|
2015-09-16T12:10:11
|
|
repository: introduce commondir variable
The commondir variable stores the path to the common directory.
The common directory is used to store objects and references
shared across multiple repositories. A current use case is the
newly introduced `git worktree` feature, which sets up a separate
working copy, where the backing git object store and references
are pointed to by the common directory.
|
|
4d99c4cf
|
2016-11-23T18:32:48
|
|
Allow for caching of submodules.
Added `git_repository_submodule_cache_all` to initialze a cache of
submodules on the repository so that operations looking up N
submodules are O(N) and not O(N^2). Added a
`git_repository_submodule_cache_clear` function to remove the cache.
Also optimized the function that loads all submodules as it was itself
O(N^2) w.r.t the number of submodules, having to loop through the
`.gitmodules` file once per submodule. I changed it to process the
`.gitmodules` file once, into a map.
Signed-off-by: David Turner <dturner@twosigma.com>
|
|
|
909d5494
|
2016-12-29T12:25:15
|
|
giterr_set: consistent error messages
Error messages should be sentence fragments, and therefore:
1. Should not begin with a capital letter,
2. Should not conclude with punctuation, and
3. Should not end a sentence and begin a new one
|
|
|
0f316096
|
2016-11-11T16:55:33
|
|
repository: do not interpret all files as gitlinks in discovery
When trying to find a discovery, we walk up the directory
structure checking if there is a ".git" file or directory and, if
so, check its validity. But in the case that we've got a ".git"
file, we do not want to unconditionally assume that the file is
in fact a ".git" file and treat it as such, as we would error out
if it is not.
Fix the issue by only treating a file as a gitlink file if it
ends with "/.git". This allows users of the function to discover
a repository by handing in any path contained inside of a git
repository.
|
|
c9e967a1
|
2016-11-10T03:51:12
|
|
git_repository_open_ext: fix handling of $GIT_NAMESPACE
The existing code would set a namespace of "" (empty string) with
GIT_NAMESPACE unset. In a repository where refs/heads/namespaces/
exists, that can produce incorrect results. Detect that case and avoid
setting the namespace at all.
Since that makes the last assignment to error conditional, and the
previous assignment can potentially get GIT_ENOTFOUND, set error to 0
explicitly to prevent the call from incorrectly failing with
GIT_ENOTFOUND.
|
|
|
b118f647
|
2016-07-22T14:02:00
|
|
repository: don't cast to `int` for no reason
And give it a default so that some compilers don't (unnecessarily)
complain.
|
|
|
2b490284
|
2016-06-24T15:59:37
|
|
find_repo: Clean up and simplify logic
find_repo had a complex loop and heavily nested conditionals, making it
difficult to follow. Simplify this as much as possible:
- Separate assignments from conditionals.
- Check the complex loop condition in the only place it can change.
- Break out of the loop on error, rather than going through the rest of
the loop body first.
- Handle error cases by immediately breaking, rather than nesting
conditionals.
- Free repo_link unconditionally on the way out of the function, rather
than in multiple places.
- Add more comments on the remaining complex steps.
|
|
|
0dd98b69
|
2016-04-03T17:22:07
|
|
Add GIT_REPOSITORY_OPEN_FROM_ENV flag to respect $GIT_* environment vars
git_repository_open_ext provides parameters for the start path, whether
to search across filesystems, and what ceiling directories to stop at.
git commands have standard environment variables and defaults for each
of those, as well as various other parameters of the repository. To
avoid duplicate environment variable handling in users of libgit2, add a
GIT_REPOSITORY_OPEN_FROM_ENV flag, which makes git_repository_open_ext
automatically handle the appropriate environment variables. Commands
that intend to act just like those built into git itself can use this
flag to get the expected default behavior.
git_repository_open_ext with the GIT_REPOSITORY_OPEN_FROM_ENV flag
respects $GIT_DIR, $GIT_DISCOVERY_ACROSS_FILESYSTEM,
$GIT_CEILING_DIRECTORIES, $GIT_INDEX_FILE, $GIT_NAMESPACE,
$GIT_OBJECT_DIRECTORY, and $GIT_ALTERNATE_OBJECT_DIRECTORIES. In the
future, when libgit2 gets worktree support, git_repository_open_env will
also respect $GIT_WORK_TREE and $GIT_COMMON_DIR; until then,
git_repository_open_ext with this flag will error out if either
$GIT_WORK_TREE or $GIT_COMMON_DIR is set.
|
|
|
39c6fca3
|
2016-04-03T16:01:01
|
|
Add GIT_REPOSITORY_OPEN_NO_DOTGIT flag to avoid appending /.git
GIT_REPOSITORY_OPEN_NO_SEARCH does not search up through parent
directories, but still tries the specified path both directly and with
/.git appended. GIT_REPOSITORY_OPEN_BARE avoids appending /.git, but
opens the repository in bare mode even if it has a working directory.
To support the semantics git uses when given $GIT_DIR in the
environment, provide a new GIT_REPOSITORY_OPEN_NO_DOTGIT flag to not try
appending /.git.
|
|
|
ed577134
|
2016-04-03T19:24:15
|
|
Fix repository discovery with ceiling_dirs at current directory
git only checks ceiling directories when its search ascends to a parent
directory. A ceiling directory matching the starting directory will not
prevent git from finding a repository in the starting directory or a
parent directory. libgit2 handled the former case correctly, but
differed from git in the latter case: given a ceiling directory matching
the starting directory, but no repository at the starting directory,
libgit2 would stop the search at that point rather than finding a
repository in a parent directory.
Test case using git command-line tools:
/tmp$ git init x
Initialized empty Git repository in /tmp/x/.git/
/tmp$ cd x/
/tmp/x$ mkdir subdir
/tmp/x$ cd subdir/
/tmp/x/subdir$ GIT_CEILING_DIRECTORIES=/tmp/x git rev-parse --git-dir
fatal: Not a git repository (or any of the parent directories): .git
/tmp/x/subdir$ GIT_CEILING_DIRECTORIES=/tmp/x/subdir git rev-parse --git-dir
/tmp/x/.git
Fix the testsuite to test this case (in one case fixing a test that
depended on the current behavior), and then fix find_repo to handle this
case correctly.
In the process, simplify and document the logic in find_repo():
- Separate the concepts of "currently checking a .git directory" and
"number of iterations left before going further counts as a search"
into two separate variables, in_dot_git and min_iterations.
- Move the logic to handle in_dot_git and append /.git to the top of the
loop.
- Only search ceiling_dirs and find ceiling_offset after running out of
min_iterations; since ceiling_offset only tracks the longest matching
ceiling directory, if ceiling_dirs contained both the current
directory and a parent directory, this change makes find_repo stop the
search at the parent directory.
|
|
|
d5592378
|
2016-04-26T11:39:53
|
|
annotated_commit: provide refs and description
Differentiate between the ref_name used to create an annotated_commit
(that can subsequently be used to look up the reference) and the
description that we resolved this with (which _cannot_ be looked up).
The description is used for things like reflogs (and may be a ref name,
and ID something that we revparsed to get here), while the ref name must
actually be a reference name, and is used for things like rebase to
return to the initial branch.
|
|
|
62602547
|
2015-12-26T22:39:22
|
|
git_repository_init: include dotfiles when copying templates
Include dotfiles when copying template directory, which will handle
both a template directory itself that begins with a dotfile, and
any dotfiles inside the directory.
|
|
2ea40fda
|
2015-11-20T13:19:23
|
|
repository: distinguish sequencer cherry-pick and revert
These are not quite like their plain counterparts and require special handling.
|
|
4f971852
|
2015-10-28T10:15:24
|
|
repository: plug memory leak
cc @carlosmn
|
|
|
8c7c5fa5
|
2015-10-20T17:42:42
|
|
config: add a ProgramData level
This is where portable git stores the global configuration which we can
use to adhere to it even though git isn't quite installed on the system.
|
|
|
aebddbe7
|
2015-09-21T06:01:03
|
|
Merge pull request #3434 from ethomson/reservednames
Win32 Reserved names: don't reserve names outside the working directory
|
|
538dfc88
|
2015-09-17T18:12:05
|
|
repository: only reserve repo dirs in the workdir
Check that the repository directory is beneath the workdir before
adding it to the list of reserved paths. If it is not, then there
is no possibility of checking out files into it, and it should not
be a reserved word.
This is a particular problem with submodules where the repo directory
may be in the super's .git directory.
|
|
|
ac2fba0e
|
2015-09-16T15:07:27
|
|
git_futils_mkdir_*: make a relative-to-base mkdir
Untangle git_futils_mkdir from git_futils_mkdir_ext - the latter
assumes that we own everything beneath the base, as if it were
being called with a base of the repository or working directory,
and is tailored towards checkout and ensuring that there is no
bogosity beneath the base that must be cleaned up.
This is (at best) slow and (at worst) unsafe in the larger context
of a filesystem where we do not own things and cannot do things like
unlink symlinks that are in our way.
|
|
|
bdec3363
|
2015-08-03T17:48:33
|
|
win32: ensure hidden files can be staged
|
|
526f91f5
|
2015-07-01T14:58:13
|
|
Fix 8.3 filename tests failure when 8.3 is disabled
|
|
|
daacf96d
|
2015-06-24T23:34:40
|
|
Merge pull request #3097 from libgit2/cmn/submodule-config-state
Remove run-time configuration settings from submodules
|
|
6a8f3fa8
|
2015-06-23T20:59:03
|
|
Fixed invalid error handling in git_repository_open_ext()
|
|
|
16c73d38
|
2015-06-23T20:44:27
|
|
repository: check the format version
This is something we do on re-init but not when opening a
repository. This hasn't particularly mattered up to now as the version
has been 0 ever since the first release of git, but the times, they're
a-changing and we will soon see version 1 in the wild. We need to make
sure we don't open those.
|
|
|
99e11cdd
|
2015-06-23T20:43:49
|
|
repository: don't error out if there is no version
git will assume the repository format version is 0 if the value is not
there. Do the same.
|
|
|
dfda2f68
|
2015-04-27T19:27:29
|
|
submodule: remove the per-repo cache
Having this cache and giving them out goes against our multithreading
guarantees and it makes it impossible to use submodules in a
multi-threaded environment, as any thread can ask for a refresh which
may reallocate some string in the submodule struct which we've accessed
in a different one via a getter.
This makes the submodules behave more like remotes, where each object is
created upon request and not shared except explicitly by the user. This
means that some tests won't pass yet, as they assume they can affect the
submodule objects in the cache and that will affect later operations.
|
|
|
63af449e
|
2015-04-10T11:33:14
|
|
Merge pull request #3030 from linquize/symlink_supported
If work_dir is not specified, use repo_dir to test if symlink is supported
|
|
|
466d2e7a
|
2015-04-03T19:01:20
|
|
For bare repository, use repo_dir to test if symlinks are supported
|
|
|
78db0239
|
2015-03-24T20:58:00
|
|
squash some leaks
|
|
|
83ad46f7
|
2015-03-18T04:59:16
|
|
Merge remote-tracking branch 'ethomson/submodule_8dot3'
|
|
|
62d38a1d
|
2015-03-06T23:51:40
|
|
Add annotated commit versions of reflog-modifying functions
We do not always want to put the id directly into the reflog, but we
want to speicfy what a user typed. For this use-case we provide
annotated version of a few functions which let the caller specify what
user-friendly name was used when asking for the operation.
|
|
|
770aca94
|
2015-03-10T15:02:02
|
|
repository: in-memory repos are bare by default
|
|
|
fe21d708
|
2015-03-04T00:29:37
|
|
Plug a few leaks
|
|
|
9a97f49e
|
2014-12-21T15:31:03
|
|
config: borrow refcounted references
This changes the get_entry() method to return a refcounted version of
the config entry, which you have to free when you're done.
This allows us to avoid freeing the memory in which the entry is stored
on a refresh, which may happen at any time for a live config.
For this reason, get_string() has been forbidden on live configs and a
new function get_string_buf() has been added, which stores the string in
a git_buf which the user then owns.
The functions which parse the string value takea advantage of the
borrowing to parse safely and then release the entry.
|
|
|
4e498646
|
2015-01-15T16:50:31
|
|
repository: remove log message override for switching the active branch
We want to use the "checkout: moving from ..." message in order to let
git know when a change of branch has happened. Make the convenience
functions for this goal write this message.
|
|
|
659cf202
|
2015-01-07T12:23:05
|
|
Remove the signature from ref-modifying functions
The signature for the reflog is not something which changes
dynamically. Almost all uses will be NULL, since we want for the
repository's default identity to be used, making it noise.
In order to allow for changing the identity, we instead provide
git_repository_set_ident() and git_repository_ident() which allow a user
to override the choice of signature.
|
|
|
4196dd8e
|
2015-02-26T15:33:58
|
|
repository: Introduce "reserved names"
A repository can have multiple "reserved names" now, not just
a single "short name" for the repository folder itself. Refactor
to include a git_repository__reserved_names that returns all the
reserved names for a repository.
|
|
|
795eaccd
|
2015-02-19T11:09:54
|
|
git_filter_opt_t -> git_filter_flag_t
For consistency with the rest of the library, where an opt is an
options *structure*.
|
|
|
cc36f424
|
2015-02-06T01:09:26
|
|
repository: parse init.templatedir as a path
This is a path so we must use the path getter so we get the tilde
expansion done.
|
|
|
5f28ec84
|
2015-02-03T12:16:11
|
|
win32: cleanup 8.3 disabled tests
|
|
|
9dcc4a36
|
2015-01-28T23:04:50
|
|
Fix test failures when 8.3 is disabled
|
|
|
27242199
|
2015-01-26T11:27:09
|
|
Merge pull request #2837 from swisspol/set_index
Allow passing a NULL index to git_repository_set_index()
|
|
|
b2a7bcdb
|
2015-01-23T20:57:13
|
|
Fixed git_repository_set_bare() not setting "core.bare" correctly
|
|
|
fa8ca519
|
2015-01-23T15:35:29
|
|
Allow passing a NULL index to git_repository_set_index()
This is supported by the underlying set_index() implementation
and setting the repository index to NULL is recommended by the
git_repository_set_bare() documentation.
|
|
526182d2
|
2015-01-20T23:24:32
|
|
Remove logically dead code (we're already asserting)
|
|
|
3dbd9a0e
|
2014-12-24T11:43:38
|
|
Check the result of git_buf_joinpath
|
|
|
a64119e3
|
2014-11-25T18:13:00
|
|
checkout: disallow bad paths on win32
Disallow:
1. paths with trailing dot
2. paths with trailing space
3. paths with trailing colon
4. paths that are 8.3 short names of .git folders ("GIT~1")
5. paths that are reserved path names (COM1, LPT1, etc).
6. paths with reserved DOS characters (colons, asterisks, etc)
These paths would (without \\?\ syntax) be elided to other paths - for
example, ".git." would be written as ".git". As a result, writing these
paths literally (using \\?\ syntax) makes them hard to operate with from
the shell, Windows Explorer or other tools. Disallow these.
|
|
|
867a36f3
|
2014-07-14T14:35:01
|
|
Introduce git_rebase to set up a rebase session
Introduce `git_rebase` to set up a rebase session that can
then be continued. Immediately, only merge-type rebase is
supported.
|
|
|
7c9bf891
|
2014-10-03T19:34:37
|
|
repository_head_unborn: clear error when HEAD is unborn
|
|
|
74240afb
|
2014-09-17T15:35:50
|
|
repository: Do not double-free config
|
|
1fbeb2f0
|
2014-09-15T21:59:23
|
|
Fix attribute lookup in index for bare repos
When using a bare repo with an index, libgit2 attempts to read
files from the index. It caches those files based on the path
to the file, specifically the path to the directory that contains
the file.
If there is no working directory, we use `git_path_dirname_r` to
get the path to the containing directory. However, for the
`.gitattributes` file in the root of the repository, this ends up
normalizing the containing path to `"."` instead of the empty
string and the lookup the `.gitattributes` data fails.
This adds a test of attribute lookups on bare repos and also
fixes the problem by simply rewriting `"."` to be `""`.
|
|
bc737620
|
2014-08-20T10:24:41
|
|
Introduce option to use relative paths for repository work directory
Teach git_repository_init_ext to use relative paths for the gitlink
to the work directory. This is used when creating a sub repository
where the sub repository resides in the parent repository's
.git directory.
|
|
|
0ba4dca5
|
2014-07-22T10:40:23
|
|
git_cherry_pick -> git_cherrypick
|
|
517341c5
|
2014-05-23T22:41:35
|
|
Address style concerns in setting mkdir/copy flags.
|
|
|
bafaf790
|
2014-05-16T08:09:20
|
|
Fixed permissions on template directories.
|
|
|
2b52a0bf
|
2014-05-13T16:32:27
|
|
Increase use of config snapshots
And decrease extra reload checks of config data.
|
|
|
df341926
|
2014-05-12T10:51:56
|
|
Merge pull request #2336 from libgit2/rb/unicode-branch-names
Pass unconverted Unicode path data when iconv doesn't like it
|
|
|
b1914c36
|
2014-05-12T10:24:46
|
|
Minor fixes for warnings and error propagation
|
|
|
d2c4d1c6
|
2014-05-12T10:04:52
|
|
Merge pull request #2188 from libgit2/cmn/config-snapshot
Configuration snapshotting
|
|
|
43a04135
|
2014-05-08T13:52:46
|
|
Pass unconverted data when iconv doesn't like it
When using Iconv to convert unicode data and iconv doesn't like
the source data (because it thinks that it's not actual UTF-8),
instead of stopping the operation, just use the unconverted data.
This will generally do the right thing on the filesystem, since
that is the source of the non-UTF-8 path data anyhow.
This adds some tests for creating and looking up branches with
messy Unicode names. Also, this takes the helper function that
was previously internal to `git_repository_init` and makes it
into `git_path_does_fs_decompose_unicode` which is a useful in
tests to understand what the expected results should be.
|
|
|
ac99d86b
|
2014-05-07T11:34:32
|
|
repository: introduce a convenience config snapshot method
Accessing the repository's config and immediately taking a snapshot of
it is a common operation, so let's provide a convenience function for
it.
|
|
|
5269008c
|
2014-05-06T16:01:49
|
|
Add filter options and ALLOW_UNSAFE
Diff and status do not want core.safecrlf to actually raise an
error regardless of the setting, so this extends the filter API
with an additional options flags parameter and adds a flag so that
filters can be applied with GIT_FILTER_OPT_ALLOW_UNSAFE, indicating
that unsafe filter application should be downgraded from a failure
to a warning.
|
|
|
702efc89
|
2014-04-30T10:57:42
|
|
Make init_options fns use unsigned ints and macro
Use an unsigned int for the version and add a helper macro so the
code is simplified (and so the error message is a common string).
|
|
c2c81615
|
2014-04-19T18:05:31
|
|
Win32: UTF-8 <-> WCHAR conversion overhaul
|
|
|
29c4cb09
|
2014-03-15T03:53:36
|
|
Use config snapshotting
This way we can assume we have a consistent view of the config situation
when we're looking up remote, branch, pack-objects, etc.
|
|
|
c3dcbe84
|
2014-04-09T12:43:27
|
|
Rewrite `git_repository__cleanup_files`
|
|
|
c0311295
|
2014-04-07T17:32:23
|
|
git_repository_state_cleanup() should remove rebase-merge/, rebase-apply/ and BISECT_LOG
|
|
|
69b6ffc4
|
2014-03-28T14:02:21
|
|
Make a real submodule cache object
This takes the old submodule cache which was just a git_strmap
and makes a real git_submodule_cache object that can contain other
things like a lock and timestamp-ish data to control refreshing of
submodule info.
|
|
b9f81997
|
2014-03-05T21:49:23
|
|
Added function-based initializers for every options struct.
The basic structure of each function is courtesy of arrbee.
|
|
cb81c3a7
|
2014-02-25T10:46:41
|
|
Merge pull request #2138 from ethomson/sysdir
Move system directory cache out of utils
|
|
|
4f46a98b
|
2014-02-24T23:32:25
|
|
Remove now-duplicated stdarg.h include
|
|
|
83634d38
|
2014-02-24T17:43:10
|
|
Move system directory cache out of utils
|
|
864535cf
|
2014-02-18T14:07:42
|
|
Readability
|
|
|
9bda5fb8
|
2014-02-18T14:05:30
|
|
Improve error propagation in shallow call
|
|
|
2d929194
|
2014-02-07T16:14:17
|
|
Merge pull request #2099 from libgit2/bs/more-reflog-stuff
More reflogness
|
|
|
3158e2fe
|
2014-02-07T15:24:39
|
|
Fix some Windows warnings
This fixes a number of warnings with the Windows 64-bit build
including a test failure in test_repo_message__message where an
invalid pointer to a git_buf was being used.
|