kmx git

Commit	Date	Message
e3cc5b2c	2018-01-03T10:03:25	Updated copyright for 2018
351d6d47	2017-12-06T12:24:32	audio: Port WASAPI to WinRT, remove XAudio2 backend. XAudio2 doesn't have capture support, so WASAPI was to replace it; the holdout was WinRT, which still needed it as its primary audio target until the WASAPI code code be made to work. The support matrix now looks like: WinXP: directsound by default, winmm as a fallback for buggy drivers. Vista+: WASAPI (directsound and winmm as fallbacks for debugging). WinRT: WASAPI
4366721b	2017-07-02T22:46:00	qnx: Removed unused bootstrap declaration. QNX_bootstrap is the VideoBootStrap. QSAAUDIO_bootstrap is still there.
22241ed0	2017-07-01T17:50:47	Support for QNX 7.0 (thanks, Elad!). Fixes Bugzilla #3686.
d9039f23	2017-06-08T13:27:58	jack: Initial shot at a JACK audio target. http://jackaudio.org/ Fixes Bugzilla #2163. (with several more commits following to improve this code.)
a7fc2822	2017-05-24T19:56:59	audio: rename bsd target to netbsd. Apparently this is no longer a generic BSD audio target, and hasn't been for years, so rename it for NetBSD.
cfcec57f	2017-02-19T21:05:09	Fixed comment.
1ed41d6d	2017-02-14T03:12:09	Patched to compile on Windows.
e5fc93ba	2017-02-13T16:59:02	audio: Don't wrap bootstrap declarations in preprocessor macros. They are harmless and ignored if we don't actually link against them. The preprocessor checks elsewhere if they're actually used.
175f1e8f	2017-02-13T16:55:00	audio: Added a ThreadDeinit() method to match ThreadInit. Not used by any targets at the moment, but will be shortly!
b3e8db80	2017-01-06T01:07:34	audio: rename fake_stream to work_buffer. It's more than an alternative for when the OS can't provide a DMA buffer, now.
4aa9e369	2017-01-05T19:45:57	Patched to compile on some compilers.
30178a9b	2017-01-05T19:29:38	audio: Added SDL_AudioStream. Non-power-of-two resampling now works!
45b774e3	2017-01-01T18:33:28	Updated copyright for 2017
a0e003ee	2016-12-06T02:23:54	Refactored the audio queueing code to a generic SDL_DataQueue interface. This is not a public API (at the moment), but we will be needing this for other internal things soon.
8b960d4e	2016-12-06T02:20:58	Added SDL_VARIABLE_LENGTH_ARRAY so this #ifdef is localized to one place.
36156335	2016-11-20T21:34:54	Renaming of guard header names to quiet -Wreserved-id-macro Patch contributed by Sylvain
57d01d7d	2016-11-13T22:57:41	Patch from Sylvain to fix clang warnings
f6a280ab	2016-10-07T15:13:46	audio: Don't trust audio drivers to drain pending audio. This tends to be a frequent spot where drivers hang, and the waits were often unreliable in any case. Instead, our audio thread now alerts the driver that we're done streaming audio (which currently XAudio2 uses to alert the system not to warn about the impending underflow) and then SDL_Delay()'s for a duration that's reasonable to drain the DMA buffers before closing the device.
76f48acf	2016-10-07T14:35:25	audio: threading and device hang improvements. This tries to make SDL robust against device drivers that have hung up, apps don't freeze in catastrophic (but not necessarily uncommon) conditions. Now we detach the audio thread and let it clean up and don't care if it never actually runs to completion.
bac61096	2016-10-04T06:48:07	ensure SDL_AUDIODEVICEREMOVED gets sent when hotplug removes a device James Zipperer The problem I was seeing was that the the ALSA hotplug thread would call SDL_RemoveAudioDevice, but my application code was not seeing an SDL_AUDIODEVICEREMOVED event to go along with it. To fix it, I added some code into SDL_RemoveAudioDevice to call SDL_OpenedAudioDeviceDisconnected on the corresponding open audio device. There didn't appear to be a way to cross reference the handle that SDL_RemoveAudioDevice gets and the SDL_AudioDevice pointer that SDL_OpenedAudioDeviceDisconnected needs, so I ended up adding a void handle field to struct SDL_AudioDevice so that I could do the cross reference. Is there some other way beside adding a void handle field to the struct to get the proper information for SDL_OpenedAudioDeviceDisconnected?
978df1ad	2016-08-06T03:39:15	disk audio: Implemented "capture" support, cleaned up some things.
9b2a59ef	2016-08-05T02:04:48	audio: Changed OnlyHasDefaultInputDevice to OnlyHasDefaultCaptureDevice.
9b647727	2016-08-05T01:44:41	audio: Clean up some CloseDevice() interface details. - It's now always called if device->hidden isn't NULL, even if OpenDevice() failed halfway through. This lets implementation code not have to clean up itself on every possible failure point; just return an error and SDL will handle it for you. - Implementations can assume this->hidden != NULL and not check for it. - implementations don't have to set this->hidden = NULL when done, because the caller is always about to free(this). - Don't reset other fields that are in a block of memory about to be free()'d. - Implementations all now free things like internal mix buffers last, after closing devices and such, to guarantee they definitely aren't in use anymore at the point of deallocation.
0d0f7080	2016-08-02T13:50:21	audio: implemented higher level infrastructure for running capture devices.
6d5c9c1e	2016-08-02T13:48:52	audio: Made some SDL_AudioDevice fields atomic. This makes sure they're properly communicated to the audio threads.
67f2538c	2016-08-01T13:32:27	audio: changed some internal ints to be SDL_bools.
c754662d	2016-08-01T11:45:45	audio: Make SDL_AudioDevice::shutdown an atomic value. Just to make sure this get communicated to the audio thread properly.
42065e78	2016-01-02T10:10:34	Updated copyright to 2016
0e45984f	2015-06-21T17:33:46	Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2c4a6ea0	2015-05-26T06:27:46	Updated the copyright year to 2015
b72938c8	2015-04-20T12:22:44	Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.
fe6c797c	2015-04-10T23:30:31	Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.
6c072917	2015-03-19T23:54:35	Patched to compile on gcc2.
11cffe1d	2015-03-19T15:43:00	SDL_RemoveAudioDevice() should specify capture vs output. This lets us reuse values between the two categories without conflicting, etc.
5cbb32ef	2015-03-19T13:27:10	Disconnected/broken/lost audio devices now continue to fire their callback. The data produced by the callback is just thrown away and the audio thread delays as if it's waiting for the hardware to drain. This lets apps that rely on their audio callback firing regularly continue to make progress to function as properly as possible in the face of disaster. Apps that want to know that the device is really gone and deal with that scenario can use the new hotplug functionality.
97ff10c6	2015-03-18T10:09:23	Tweaked a couple comments, added some FIXMEs.
f9cfd9fa	2015-03-18T02:01:17	Bunch of reworking to how we manage audio devices. Device enumeration now happens at startup and then is managed exclusively through hotplugging instead of full redetection. The device name list now has a unique "handle" associated with each item and SDL will pass this to the backend so they don't have to figure out how a human readable name maps to real hardware for a second time. Other cleanups, fixes, improvements, plus all the audio backends updated to the new interface...largely untested at this point, though.
0e02ce08	2015-03-16T02:11:39	Initial work on audio device hotplug support. This fills in the core pieces and fully implements it for Mac OS X. Most other platforms, at the moment, will report a disconnected device if it fails to write audio, but don't notice if the system's device list changed at all.
b88ca1b4	2015-02-10T16:28:56	the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802
b48e54aa	2015-01-26T22:00:29	Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.
70438be2	2014-12-03T10:55:23	WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!
9c398852	2014-11-22T22:20:40	Corrected header file documentation comment.
24c86b55	2014-09-11T19:24:42	[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam
e5d49c20	2014-07-30T11:08:31	Added a GetPendingBytes method to the audio backend. This will (eventually) make SDL_GetQueuedAudioSize() more accurate, and thus reduce latency. Right now this isn't implemented anywhere, so we assume data fed to the audio callback is consumed by the hardware and immediately played to completion.
f30e120a	2014-07-22T21:41:49	Added audio device buffer queueing API.
3dcb451f	2014-04-09T21:29:19	Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.
58edac3e	2014-02-02T00:53:27	Fixed bug 2374 - Update copyright for 2014... Is it that time already??
f848adff	2013-11-29T10:06:08	Improve Android pause/resume behavior.
7e1289af	2013-11-24T23:56:17	Make internal SDL sources include SDL_internal.h instead of SDL_config.h The new header will include SDL_config.h, but allows for other global stuff.
dad42067	2013-08-12T11:13:50	Fixes #2022, do not resume on Android when surfaceChanged If the app is in landscape mode and the user presses the power button, a pause is followed immediately by a surfaceChanged event because the lock screen is shown in portrait mode. This triggers a "false" resume. So, we just pause and resume following the onWindowFocusChanged events. Also, wait for SDL_APP_WILLENTERBACKGROUND and SDL_APP_DIDENTERBACKGROUND before blocking the event pump.
1ad936eb	2013-08-11T19:56:43	Fixed bug 2027 - Full-screen appears to be broken - hang in SDL_DestroyWindow() Rainer Deyke I'm running Linux Mint 15 with the Cinnamon window manager. SDL_DestroyWindow consistently locks up for me when the window if fullscreen.

e3cc5b2c

2018-01-03T10:03:25

Updated copyright for 2018

351d6d47

2017-12-06T12:24:32

audio: Port WASAPI to WinRT, remove XAudio2 backend. XAudio2 doesn't have capture support, so WASAPI was to replace it; the holdout was WinRT, which still needed it as its primary audio target until the WASAPI code code be made to work. The support matrix now looks like: WinXP: directsound by default, winmm as a fallback for buggy drivers. Vista+: WASAPI (directsound and winmm as fallbacks for debugging). WinRT: WASAPI

4366721b

2017-07-02T22:46:00

qnx: Removed unused bootstrap declaration. QNX_bootstrap is the VideoBootStrap. QSAAUDIO_bootstrap is still there.

22241ed0

2017-07-01T17:50:47

Support for QNX 7.0 (thanks, Elad!). Fixes Bugzilla #3686.

d9039f23

2017-06-08T13:27:58

jack: Initial shot at a JACK audio target. http://jackaudio.org/ Fixes Bugzilla #2163. (with several more commits following to improve this code.)

a7fc2822

2017-05-24T19:56:59

audio: rename bsd target to netbsd. Apparently this is no longer a generic BSD audio target, and hasn't been for years, so rename it for NetBSD.

cfcec57f

2017-02-19T21:05:09

Fixed comment.

1ed41d6d

2017-02-14T03:12:09

Patched to compile on Windows.

e5fc93ba

2017-02-13T16:59:02

audio: Don't wrap bootstrap declarations in preprocessor macros. They are harmless and ignored if we don't actually link against them. The preprocessor checks elsewhere if they're actually used.

175f1e8f

2017-02-13T16:55:00

audio: Added a ThreadDeinit() method to match ThreadInit. Not used by any targets at the moment, but will be shortly!

b3e8db80

2017-01-06T01:07:34

audio: rename fake_stream to work_buffer. It's more than an alternative for when the OS can't provide a DMA buffer, now.

4aa9e369

2017-01-05T19:45:57

Patched to compile on some compilers.

30178a9b

2017-01-05T19:29:38

audio: Added SDL_AudioStream. Non-power-of-two resampling now works!

45b774e3

2017-01-01T18:33:28

Updated copyright for 2017

a0e003ee

2016-12-06T02:23:54

Refactored the audio queueing code to a generic SDL_DataQueue interface. This is not a public API (at the moment), but we will be needing this for other internal things soon.

8b960d4e

2016-12-06T02:20:58

Added SDL_VARIABLE_LENGTH_ARRAY so this #ifdef is localized to one place.

36156335

2016-11-20T21:34:54

Renaming of guard header names to quiet -Wreserved-id-macro Patch contributed by Sylvain

57d01d7d

2016-11-13T22:57:41

Patch from Sylvain to fix clang warnings

f6a280ab

2016-10-07T15:13:46

audio: Don't trust audio drivers to drain pending audio. This tends to be a frequent spot where drivers hang, and the waits were often unreliable in any case. Instead, our audio thread now alerts the driver that we're done streaming audio (which currently XAudio2 uses to alert the system not to warn about the impending underflow) and then SDL_Delay()'s for a duration that's reasonable to drain the DMA buffers before closing the device.

76f48acf

2016-10-07T14:35:25

audio: threading and device hang improvements. This tries to make SDL robust against device drivers that have hung up, apps don't freeze in catastrophic (but not necessarily uncommon) conditions. Now we detach the audio thread and let it clean up and don't care if it never actually runs to completion.

bac61096

2016-10-04T06:48:07

ensure SDL_AUDIODEVICEREMOVED gets sent when hotplug removes a device James Zipperer The problem I was seeing was that the the ALSA hotplug thread would call SDL_RemoveAudioDevice, but my application code was not seeing an SDL_AUDIODEVICEREMOVED event to go along with it. To fix it, I added some code into SDL_RemoveAudioDevice to call SDL_OpenedAudioDeviceDisconnected on the corresponding open audio device. There didn't appear to be a way to cross reference the handle that SDL_RemoveAudioDevice gets and the SDL_AudioDevice pointer that SDL_OpenedAudioDeviceDisconnected needs, so I ended up adding a void *handle field to struct SDL_AudioDevice so that I could do the cross reference. Is there some other way beside adding a void *handle field to the struct to get the proper information for SDL_OpenedAudioDeviceDisconnected?

978df1ad

2016-08-06T03:39:15

disk audio: Implemented "capture" support, cleaned up some things.

9b2a59ef

2016-08-05T02:04:48

audio: Changed OnlyHasDefaultInputDevice to OnlyHasDefaultCaptureDevice.

9b647727

2016-08-05T01:44:41

audio: Clean up some CloseDevice() interface details. - It's now always called if device->hidden isn't NULL, even if OpenDevice() failed halfway through. This lets implementation code not have to clean up itself on every possible failure point; just return an error and SDL will handle it for you. - Implementations can assume this->hidden != NULL and not check for it. - implementations don't have to set this->hidden = NULL when done, because the caller is always about to free(this). - Don't reset other fields that are in a block of memory about to be free()'d. - Implementations all now free things like internal mix buffers last, after closing devices and such, to guarantee they definitely aren't in use anymore at the point of deallocation.

0d0f7080

2016-08-02T13:50:21

audio: implemented higher level infrastructure for running capture devices.

6d5c9c1e

2016-08-02T13:48:52

audio: Made some SDL_AudioDevice fields atomic. This makes sure they're properly communicated to the audio threads.

67f2538c

2016-08-01T13:32:27

audio: changed some internal ints to be SDL_bools.

c754662d

2016-08-01T11:45:45

audio: Make SDL_AudioDevice::shutdown an atomic value. Just to make sure this get communicated to the audio thread properly.

42065e78

2016-01-02T10:10:34

Updated copyright to 2016

0e45984f

2015-06-21T17:33:46

Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().

2c4a6ea0

2015-05-26T06:27:46

Updated the copyright year to 2015

b72938c8

2015-04-20T12:22:44

Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.

fe6c797c

2015-04-10T23:30:31

Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.

6c072917

2015-03-19T23:54:35

Patched to compile on gcc2.

11cffe1d

2015-03-19T15:43:00

SDL_RemoveAudioDevice() should specify capture vs output. This lets us reuse values between the two categories without conflicting, etc.

5cbb32ef

2015-03-19T13:27:10

Disconnected/broken/lost audio devices now continue to fire their callback. The data produced by the callback is just thrown away and the audio thread delays as if it's waiting for the hardware to drain. This lets apps that rely on their audio callback firing regularly continue to make progress to function as properly as possible in the face of disaster. Apps that want to know that the device is really gone and deal with that scenario can use the new hotplug functionality.

97ff10c6

2015-03-18T10:09:23

Tweaked a couple comments, added some FIXMEs.

f9cfd9fa

2015-03-18T02:01:17

Bunch of reworking to how we manage audio devices. Device enumeration now happens at startup and then is managed exclusively through hotplugging instead of full redetection. The device name list now has a unique "handle" associated with each item and SDL will pass this to the backend so they don't have to figure out how a human readable name maps to real hardware for a second time. Other cleanups, fixes, improvements, plus all the audio backends updated to the new interface...largely untested at this point, though.

0e02ce08

2015-03-16T02:11:39

Initial work on audio device hotplug support. This fills in the core pieces and fully implements it for Mac OS X. Most other platforms, at the moment, will report a disconnected device if it fails to write audio, but don't notice if the system's device list changed at all.

b88ca1b4

2015-02-10T16:28:56

the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802

b48e54aa

2015-01-26T22:00:29

Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.

70438be2

2014-12-03T10:55:23

WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!

9c398852

2014-11-22T22:20:40

Corrected header file documentation comment.

24c86b55

2014-09-11T19:24:42

[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam

e5d49c20

2014-07-30T11:08:31

Added a GetPendingBytes method to the audio backend. This will (eventually) make SDL_GetQueuedAudioSize() more accurate, and thus reduce latency. Right now this isn't implemented anywhere, so we assume data fed to the audio callback is consumed by the hardware and immediately played to completion.

f30e120a

2014-07-22T21:41:49

Added audio device buffer queueing API.

3dcb451f

2014-04-09T21:29:19

Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.

58edac3e

2014-02-02T00:53:27

f848adff

2013-11-29T10:06:08

Improve Android pause/resume behavior.

7e1289af

2013-11-24T23:56:17

Make internal SDL sources include SDL_internal.h instead of SDL_config.h The new header will include SDL_config.h, but allows for other global stuff.

dad42067

2013-08-12T11:13:50

Fixes #2022, do not resume on Android when surfaceChanged If the app is in landscape mode and the user presses the power button, a pause is followed immediately by a surfaceChanged event because the lock screen is shown in portrait mode. This triggers a "false" resume. So, we just pause and resume following the onWindowFocusChanged events. Also, wait for SDL_APP_WILLENTERBACKGROUND and SDL_APP_DIDENTERBACKGROUND before blocking the event pump.

1ad936eb

2013-08-11T19:56:43

Fixed bug 2027 - Full-screen appears to be broken - hang in SDL_DestroyWindow() Rainer Deyke I'm running Linux Mint 15 with the Cinnamon window manager. SDL_DestroyWindow consistently locks up for me when the window if fullscreen.

kc3-lang/SDL/src/audio/SDL_sysaudio.h

src/audio/SDL_sysaudio.h

Log