kmx git

Commit	Date	Message
20ca1192	2020-12-24T00:26:32	testgesture.c: comment out unused drawLine()
b064028c	2020-12-24T00:25:40	testatomic.c: fix warnings due to SDL_AtomicDecRef() use
8e20376f	2020-12-23T22:09:01	SDL_SoftStretchLinear: use SDL_INLINE (bug 5313)
7b8d5b7d	2020-12-23T22:02:28	SDL_SoftStretchLinear: fix implicit conversion (bug 5313)
15fea339	2020-12-23T23:47:10	ran gendynapi.pl after addition of SDL_SoftStretchLinear
ae8a270f	2020-12-23T21:37:40	Add SDL_SoftStretchLowerLinear() (Bug 5313)
050ee9a4	2020-12-23T21:32:01	Split SDL_SoftStretch in Lower and Uppler functions (Bug 5313)
09fcc9ed	2020-12-23T16:45:23	[KMS/DRM][Vulkan] Fix small warning, thanks to Ozkan Sezer for spotting it.
a6dc838d	2020-12-23T16:22:46	[KMS/DRM][Vulkan] Only try to create a display mode when no suitable mode is found.
0ed4d929	2020-12-23T04:53:23	Fixed setting player LEDs for PS5 controllers over Bluetooth
6341bb35	2020-12-22T21:51:59	Fixed controller disconnect detection for PS4 and PS5 controllers over Bluetooth
a30adae5	2020-12-22T20:58:32	Make it possible to turn on PS4 rumble effects at runtime using the hint
390b2cf0	2020-12-22T20:53:27	Enable PS5 enhanced functionality for testgamecontroller
c93947a2	2020-12-22T20:12:03	Make it possible to turn on PS5 rumble effects at runtime using the hint
058a0ab4	2020-12-22T14:38:32	Set the pad lights on the PS5 controller corresponding to the player index Also allow setting the player index from testgamecontroller using the number keys
6a57072e	2020-12-22T14:10:08	Only add the touchpad and sensors to the PS5 controller if effects are enabled
4ec776c3	2020-12-22T13:29:23	Don't switch the PS5 controller out of DirectInput mode by default
b4b674da	2020-12-22T22:10:50	CMakeLists.txt: sync DYLIB_CURRENT_VERSION to Xcode project
350f1b0d	2020-12-22T10:36:15	Updated SDL to version 2.0.15 for development
13244de5	2020-12-22T17:17:30	[Buildsystem] Only build KMSDRM support if EGL+OpenGL is detected by CMake.
a19c008a	2020-12-22T17:10:02	use GetModuleHandleW() to retrieve kernel32.dll handle (bug #5390.) SDL_systhread.c and SDL_syslocale.c used to call LoadLibrary() without calling FreeLibrary() later. GetModuleHandleW() should always succeed because GetModuleHandleW() itself is imported from kernel32.dll and we don't need to bother releasing it.
9f655fe5	2020-12-22T17:03:20	regenerated configure
5ad56457	2020-12-22T17:01:50	acinclude/pkg.m4: update from mainstream pkgconfig tree.
86191351	2020-12-22T17:00:28	acinclude & sdl2.m4 updates: - acinclude/alsa.m4, esd.m4: Ran through autoupdate to replace several AC_TRY_[COMPILE\|LINK\|RUN] with corresponding AC_???_IFELSE , so that autoconf-2.70 doesn't warn. - sdl2.m4: Ditto. - test/acinclude.m4 (sdl2): Ditto.
f117db51	2020-12-22T17:00:11	sdl2.m4 updates: - remove HP/UX 9 (%@#!) support - change fopen() mode from "a" to "w" in test code. - bump its serial num to 2. - test/acinclude.m4: same sdl2.m4 updates.
087de97b	2020-12-22T17:00:00	acinclude/esd.m4: update from mainstream esound tree, - revise for better compatibility with new autoconf, - remove HP/UX 9 (%@#!) support from it, - replace system("touch conf.esdtest") with fopen/fclose in the test code (see, e.g. glib-2.0.m4 -- sdl.m4 does the same.)
15abab9c	2020-12-22T16:25:00	regenerated configure
2fc987c2	2020-12-22T14:15:33	[Buildsystem] Add guards for not building with KMSDRM support if EGL is not available.
05dcec0a	2020-12-21T14:43:38	Added tag release-2.0.14 for changeset 97dfa8874ea0
4cd98160	2020-12-21T09:44:25	Fixed whitespace
537f824f	2020-12-21T20:40:10	test/Makefile.os2: wlib must run case-sensitively.
8766d604	2020-12-21T17:29:24	[Video/KMSDRM] Fix potetial access to freed structure and complete errorchecks.
b06ef3a1	2020-12-21T01:53:11	[Video/KMSDRM] Manually re-show the cursor on window creation, if needed.
4198f0e5	2020-12-21T01:20:30	fix uninitialized warnings in KMSDRM_CreateCursor()
a8dbcab1	2020-12-20T21:48:05	[Video/KMSDRM] Don't copy the cursor bitmap to the cursor GBM BO until we're showing it.
67e9132d	2020-12-20T12:22:28	Fixed circular dependency problem when building in the test directory
ee180efd	2020-12-20T12:08:49	Fixed bug 5406 - Upstreaming DragonFlyBSD changes from DeltaPorts (patch from David Carlier)
22275b35	2020-12-20T21:55:02	cmake: fix building for mac (bug #5407.)
2756b0f3	2020-12-20T14:29:58	[Video/KMSDRM] Init and deinit mouse stuff at the same time that GBM stuff.
e91153f2	2020-12-20T03:03:21	fix non-ARM h/w on FreeBSD builds (bug #5405, patch from David Carlier.)
cf71e017	2020-12-19T23:32:09	[Video/KMSDRM] Remove auxiliary AMDGPU compatibility workarounds not needed anymore.
af1f91cb	2020-12-19T20:21:07	[Video/KMSDRM] Correct typo.
cf489556	2020-12-19T20:15:50	[Video/KMSDRM] Honor the device index in Vulkan. Add notes about the display index.
ab3a390e	2020-12-19T17:35:04	[Video/KMSDRM] Better ATOMIC caps testing: patch by Oskan Sezer.
436499f3	2020-12-19T02:08:59	[Video/KMSDRM] Comment out some debug info, adjust comments for future work.
6b81cac4	2020-12-19T01:25:50	remove duplicated SDL_SetError after calling check_atomic_modesetting()
8952a613	2020-12-18T23:17:42	[Video/KMSDRM] Re-arrange display members setup.
f60f8d5d	2020-12-18T22:53:51	[Video/KMSDRM]: Add Vulkan support to the KMSDRM backend.
cbe13d23	2020-12-18T13:10:36	Fixed controller hotplug detection when joystick thread is not enabled
6ac0b23d	2020-12-18T21:37:20	SDL_DirectFB_video.c: DSPF_ABGR requires directfb >= 1.5.0 -- add guard.
f0577bc9	2020-12-18T10:09:06	ControllerList: setup the ps5 default deadzone to match PS4 instead of defaulting to same a XboxOne/Switch
5f7cd1fa	2020-12-18T10:08:59	Added hints to control whether SDL updates joystick and sensor state in the main event loop
6c4ab484	2020-12-18T17:50:02	SDL_kmsdrmvideo.c: check atomic modesetting in check_modesetting() .. so that KMSDRM_CreateDevice() can fail and SDL_VideoInit() would move on to next bootstrap member which is kmsdrm_legacy. hopefully fixes bug #5393.
5c654d0d	2020-12-18T17:00:00	tests: regenerate configure using autoconf patched for AC_PATH_X11 Specifically this patch which does not invoke _AC_PATH_X_XMKMF and _AC_PATH_X_DIRECT internal autoconf routines when cross-compiling: http://git.savannah.gnu.org/gitweb/?p=autoconf.git;a=commitdiff;h=33c3a47c04ab70a4dd54963fe433a171bc03747f Without this, CFLAGS would brokenly have system include paths like -I/usr/include/X11 when cross-compiling e.g. for windows. (And it also resulted in annoying imake crashes for my setup...)
6bd4c717	2020-12-17T21:41:23	Fixed bug 5402 - ARM support little update proposal David Carlier No fix but mostly an update for ARM architecture.
10625f9d	2020-12-17T23:50:00	SDL_windowsmessagebox.c: go back to hg rev 14458 state. encountering a NULL caption in AddDialogString() is intended, i.e. AddDialogStaticIcon() sends it as NULL on purpose.
4d6eb305	2020-12-17T23:28:20	SDL_windowsmessagebox.c (AddDialogControl): add back NULL caption check. because AddDialogStaticIcon() sends a NULL caption -- fixes bug #5401.
90456670	2020-12-17T14:11:00	more "'for' loop initial declarations are only allowed in C99 mode" fixes
ed4fcb2c	2020-12-16T03:24:10	kmsdrm_legacy build fixes: - add missing '_LEGACY' to symbol names - perform missing 2.0.14 portage - fix 'for' loop initial declarations are only allowed in C99 mode errors
f484abbd	2020-12-15T14:57:51	Added Android mapping for the Xbox One Series X controller over Bluetooth
cdd39711	2020-12-15T14:57:49	Fixed the Xbox Series X controller showing up twice on Android
14f97734	2020-12-15T14:57:47	Fixed whitespace
9940e710	2020-12-16T00:10:30	Import two post-2.0.12 fixes to kmsdrm_legacy: Fix build breakage without EGL: https://hg.libsdl.org/SDL/rev/f2606fe53654e305ab9badb821d9d3afb7f92f49 Fix KMSDRM_CreateWindow segfault when starting L?VE2D engine (bug 5199) https://hg.libsdl.org/SDL/rev/d2e69a78939463d9ff9448a5f4efd1e208bb97b0
f8839289	2020-12-15T12:22:48	Potential fix for bug 5393 - KMSDRM: using atomic mode setting breaks GPU compatibility Substring I was trying the KMSDRM video backend with some very simple programs that were working ok on 2.0.12. The same code won?t work on the current dev branch and I get: DEBUG: check_modesetting: probing ?/dev/dri/card0? DEBUG: /dev/dri/card0 connector, encoder and CRTC counts are: 4 5 6 DEBUG: check_modesetting: probing ?/dev/dri/card0? DEBUG: /dev/dri/card0 connector, encoder and CRTC counts are: 4 5 6 DEBUG: KMSDRM_VideoInit() DEBUG: Opening device /dev/dri/card0 DEBUG: Opened DRM FD (3) DEBUG: no atomic modesetting support. DEBUG: Video subsystem has not been initialized INFO: Using SDL video driver: (null) DEBUG: Video subsystem has not been initialized After carefully checking, the radeon driver doesn?t support atomic modesetting. That?s not the only problem : the same happens with the amdgpu driver if we disable Display Core (kernel parameter amdgpu.dc=0, which is required to get analogue outputs working). This is a major regression in the KMSDRM driver. Using atomic mode setting is great, but having no fallback to the "standard KMS" is bad.
c02d88dd	2020-12-15T23:01:10	configury whitespace cleanup (no actual change.)
6cb78120	2020-12-15T00:42:17	Fixed bug 5399 - make install is broken as it depends on missing rule `build` Stephen Broadfoot I've tracked this down to the following changeset bb65ba8e039b https://hg.libsdl.org/SDL/diff/bb65ba8e039b/Makefile.in this changeset renames the rule `build` to `build/.created` but the rule `install-lib` still depends on the rule `build` This affects users who are trying to install via homebrew who are installing via source and not by the bottle as this invokes `make install` To be clear, the error I was hitting when running make install is make: *** No rule to make target `build', needed by `install-lib'. Stop.
716ac535	2020-12-15T01:20:00	test/acinclude.m4: rename SDL_CONFIG to SDL2_CONFIG, regenerate configure
637d425e	2020-12-15T00:11:10	whitespace.
e65e4fd3	2020-12-14T09:48:51	Fixed detecting the guide button on Xbox One S controllers over Bluetooth on Linux
f1c7cc71	2020-12-14T12:36:04	winrt: Buildfix for older UWP SDKs
bfffa275	2020-12-14T09:23:53	Fixed bug 5397 - Fcitx input is truncated sowfelicity Split the long text input event into multiple shorten text input event.
8795ca70	2020-12-14T09:15:47	Fixed bug 5241 - SDL on Linux needs a way to turn deadzones off pj5085 I added some printf to verify the math being done. Of the three joysticks I have, it works correctly for at least two, and seems to work correctly for the third. I say "seems to" because, for the third joystick, the values never go through the AxisCorrect function, and thus never hit my printf statements, even though they did in the version I wrote my patch against. I'm not sure what's going on there, but it at least seems to be working correctly in as much as I can tell. I note this result in particular, for an SNES Gamepad (min=0, max=255): Joystick value 0 becomes -32768 Joystick value 127 becomes 0 Joystick value 255 becomes 32767 Without the code that forces a zero point, the 127 input value would become -129, so I think you see why I added that code to turn it into zero. However, I think Kai Krakow has a point about how SDL shouldn't assume that there should be a center. Obviously in the majority of cases there actually should be a center, and the code that turns that 127 into an actual 0 is creating only a 0.2% error over 0.4% of this joystick's range. However, what if there is an axis that is some kind of special control, like a 4-position switch, and, for whatever reason, the joystick reports it as an axis with 4 possible values, 0 to 3? In that case, mutilating the two center values to the same value is much more of an error and and turns that 4-position switch into a 3-position switch. If any joystick does this with a 2-position switch, then this code would render that control entirely useless as it would report the same value with the switch in either position. Obviously the code could require that there be at least N possible values, to guess whether something is a proper axis or just some kind of switch, but the choice of N would be arbitrary and that's ugly. I guess the real problem here is that my gamepad is just kind of broken. It should be reporting a range of -1 to +1 since that's what it actually does. Also, as Kai Krakow points out, it's probably not SDL's place to fix broken hardware. I'll add that, if SDL does fix broken hardware, it should probably actually know that it's broken rather than be merely guessing that it is. So, to the extent that SDL is able to do stuff like this, perhaps it's something better left for the user to configure in some kind of config file.
169cfe5a	2020-12-14T11:52:09	winrt: EffectiveLocation still needs an ifdef, IsApiContractPresent is for runtime
44d4a61d	2020-12-14T08:11:40	minor cleanups to configure.ac to reduce autoconf-2.70 warnings a bit. configure output is practically unchanged. there are still lots of AC_TRY_COMPILE/AC_TRY_LINK replacements needed to really eliminate the warnings, but that's for another time.
f8078d3d	2020-12-14T05:55:20	configure.ac: use AC_DEFINE for SDL_VIDEO_DRIVER_ANDROID
3c2757ff	2020-12-13T18:25:02	windows SDL_LoadObject: fix warning after commit 2ff650230d96
15cbddf4	2020-12-13T18:00:20	linux/SDL_threadprio.c: fix build on older systems: SCHED_RESET_ON_FORK is in kernel >= 2.6.32.
3b92933a	2020-12-13T17:37:50	SDL_LoadObject (windows, os/2): prevent crash if dll name is NULL.
f674009c	2020-12-13T16:51:20	fix typo from commit 63349df2610a (fixes bug 5396)
b6e63625	2020-12-13T15:32:24	fix bug #5395: handle old systems where inotify_init1 is not available
ee85a41a	2020-12-13T02:10:46	Fixed compile warning
64f448b2	2020-12-13T02:01:39	libusb hid.c is already included in SDL_hidapi.c
706f6375	2020-12-13T01:58:05	Fixed build for platforms with only libusb hidapi implementations
80e5c689	2020-12-13T01:20:38	Fixed the PS5 controller not disconnecting when powered off
c8ee0691	2020-12-13T00:15:54	Added SDL_misc.h to the Xcode built frameworks
ce7c751c	2020-12-12T23:54:40	Document that the joystick deadzone hint defaults off
db0a2025	2020-12-12T23:48:02	Fixed bug 5241 - SDL on Linux needs a way to turn deadzones off pj5085 It occurred to me that my simple patch that comments out a few lines of code does not correctly remove the dead zone since the calculation presumably assumes the dead zone has been cut out of the range. Then, while looking into how to make it output the correct range of values, I realized SDL wasn't returning the correct range of values to begin with. This line of code was already present: printf("Values = { %d, %d, %d, %d, %d }\n", absinfo.value, absinfo.minimum, absinfo.maximum, absinfo.fuzz, absinfo.flat); For my joystick this yeilds: Values = { 0, -127, 127, 0, 15 } Then this code calculates the coefficients: In SDL1: joystick->hwdata->abs_correct[i].coef[0] = (absinfo.maximum + absinfo.minimum) / 2 - absinfo.flat; joystick->hwdata->abs_correct[i].coef[1] = (absinfo.maximum + absinfo.minimum) / 2 + absinfo.flat; t = ((absinfo.maximum - absinfo.minimum) / 2 - 2 * absinfo.flat); if ( t != 0 ) { joystick->hwdata->abs_correct[i].coef[2] = (1 << 29) / t; } else { joystick->hwdata->abs_correct[i].coef[2] = 0; } In SDL2: joystick->hwdata->abs_correct[i].coef[0] = (absinfo.maximum + absinfo.minimum) - 2 * absinfo.flat; joystick->hwdata->abs_correct[i].coef[1] = (absinfo.maximum + absinfo.minimum) + 2 * absinfo.flat; t = ((absinfo.maximum - absinfo.minimum) - 4 * absinfo.flat); if (t != 0) { joystick->hwdata->abs_correct[i].coef[2] = (1 << 28) / t; } else { joystick->hwdata->abs_correct[i].coef[2] = 0; } Neither calculates the correct coefficients for the code in the AxisCorrect function. In SDL1: if ( value > correct->coef[0] ) { if ( value < correct->coef[1] ) { return 0; } value -= correct->coef[1]; } else { value -= correct->coef[0]; } value = correct->coef[2]; value >>= 14; In SDL2: value = 2; if (value > correct->coef[0]) { if (value < correct->coef[1]) { return 0; } value -= correct->coef[1]; } else { value -= correct->coef[0]; } In SDL1, the calculated coefficients are coef[0]=15, coef[1]=-15 and coef[2]=5534751. So with a full-scale input of 127, it calculates an output value of 37835, which is considerably out of range. In SDL2, the calculated coefficients are coef[0]=30, coef[1]=-30, and coef[2]=1383687. So with a full-scale input of 127, it calculates the same output value of 37835. I tested it with the 3 joysticks I have, and it produces out-of-range values for all of them. Anyway, since dead zones are garbage, I just deleted all of that junk and wrote some code that takes the absinfo.minimum and absinfo.maximum values and uses them to scale the axis range to -32767 through +32767. I also made it detect when a range doesn't have an integer center point, e.g. the center of -128 to + 127 is -0.5. In such cases, if either value to the side of the center is provided, it zeros it, but it otherwise doesn't implement any kind of dead zone. This seemed important with my gamepad which provides only the values of 0, 127, and 255, since without this hack it would never be centered. Also, the previous minimum output value was -32768, but as that creates an output range that has no true center, I changed the minimum value to -32767. I tested it with the 3 joystick devices I have and it seems to create correct values for all of them.
0ccb3afd	2020-12-12T22:33:11	Fixed polling values after SYN_DROPPED event
9ee0e888	2020-12-12T22:11:00	Whoops, make the hint actually default to false
13a4caf1	2020-12-12T22:08:02	Fixed bug 4286 - Joystick subsystem causes "not responding" when app is in the background Added a hint to control whether a separate thread should be used for joystick events. This is off by default because dispatching messages in other threads appears to cause problems on some versions of Windows.
bca9decb	2020-12-12T23:28:10	fix bug #5394 - define _DARWIN_C_SOURCE only if not already defined
5c212cb0	2020-12-10T12:24:24	remove a few stale NULL message/title checks after commit e2b729b1756a top-level guarantees non-NULL message / title passed in messageboxdata
f1cab8ae	2020-12-10T11:20:56	fix bug #5253: handle NULL title or message fields in SDL_MessageBoxData - SDL_video.c (SDL_ShowMessageBox): replace messageboxdata, set title or message field to "" if either of them is NULL. - SDL_video.c (SDL_ShowSimpleMessageBox): set title or message to "" if either of them is NULL for EMSCRIPTEN builds. - SDL_bmessagebox.cc: add empty string check along with NULL check for title and message fields. - SDL_windowsmessagebox.c (AddDialogString): remove NULL string check - SDL_windowsmessagebox.c (AddDialogControl): add empty string check along with the NULL check. - SDL_x11messagebox.c: revert commit 677c4cd68069 - SDL_os2messagebox.c: revert commit 2c2a489d76e7 - test/testmessage.c: Add NULL title and NULL message tests.
eec73dfd	2020-12-09T20:31:00	configure.ac (CheckJoystickMFI): changed AC_TRY_COMPILE to AC_TRY_LINK so as to discover GameController and CoreHaptics frameworks at compile time.
797a6910	2020-12-09T20:28:51	Fixed bug 5375 - WGI: Fix HSTRING memory leak. Joel Linn TLDR; https://godbolt.org/z/43fd8G Let's deduce this from C++ reference code: https://docs.microsoft.com/en-us/cpp/cppcx/wrl/how-to-activate-and-use-a-windows-runtime-component-using-wrl?view=msvc-160 At the bottom of the page there is this snippet: ``` int wmain() { /* ... more code ... */ // Get the domain part of the URI. HString domainName; hr = uri->get_Domain(domainName.GetAddressOf()); if (FAILED(hr)) { return PrintError(__LINE__, hr); } // Print the domain name and return. wprintf_s(L"Domain name: %s\n", domainName.GetRawBuffer(nullptr)); // All smart pointers and RAII objects go out of scope here. } ``` `HString` is defined in `corewrappers.h` and the call chain for the destructor is: `~HString() -> Release() -> ::WindowsDeleteString()` QED
d3d2aee7	2020-12-09T10:39:36	Fixed the name of the PS5 hint
a77a0715	2020-12-09T07:50:15	Disabled raw input debug output
d46dd103	2020-12-09T07:49:07	Fixed typo in Vulkan load logic
45e3521d	2020-12-09T07:32:10	Backed out changes for 5366 - cmake build doesn't detect Metal on macOS These changes introduce regressions for other build environments, so I'm backing them out until we sort out the correct fix.
bd032c1f	2020-12-09T07:26:59	Fixed bug 5221 - libusb isn't detected correctly in CMake Sven-Hendrik Haase In CMake I currently have trouble activating hidapi support as libusb-1.0 isn't ever correctly detected as it's searched for by the wrong name. configure.ac correctly does this: PKG_CHECK_MODULES([LIBUSB], [libusb-1.0], have_libusb=yes, have_libusb=no) However, sdlchecks.cmake does this: pkg_check_modules(LIBUSB libusb) but it needs to be: pkg_check_modules(LIBUSB libusb-1.0)

20ca1192

2020-12-24T00:26:32

testgesture.c: comment out unused drawLine()

b064028c

2020-12-24T00:25:40

testatomic.c: fix warnings due to SDL_AtomicDecRef() use

8e20376f

2020-12-23T22:09:01

SDL_SoftStretchLinear: use SDL_INLINE (bug 5313)

7b8d5b7d

2020-12-23T22:02:28

SDL_SoftStretchLinear: fix implicit conversion (bug 5313)

15fea339

2020-12-23T23:47:10

ran gendynapi.pl after addition of SDL_SoftStretchLinear

ae8a270f

2020-12-23T21:37:40

Add SDL_SoftStretchLowerLinear() (Bug 5313)

050ee9a4

2020-12-23T21:32:01

Split SDL_SoftStretch in Lower and Uppler functions (Bug 5313)

09fcc9ed

2020-12-23T16:45:23

[KMS/DRM][Vulkan] Fix small warning, thanks to Ozkan Sezer for spotting it.

a6dc838d

2020-12-23T16:22:46

[KMS/DRM][Vulkan] Only try to create a display mode when no suitable mode is found.

0ed4d929

2020-12-23T04:53:23

Fixed setting player LEDs for PS5 controllers over Bluetooth

6341bb35

2020-12-22T21:51:59

Fixed controller disconnect detection for PS4 and PS5 controllers over Bluetooth

a30adae5

2020-12-22T20:58:32

Make it possible to turn on PS4 rumble effects at runtime using the hint

390b2cf0

2020-12-22T20:53:27

Enable PS5 enhanced functionality for testgamecontroller

c93947a2

2020-12-22T20:12:03

Make it possible to turn on PS5 rumble effects at runtime using the hint

058a0ab4

2020-12-22T14:38:32

Set the pad lights on the PS5 controller corresponding to the player index Also allow setting the player index from testgamecontroller using the number keys

6a57072e

2020-12-22T14:10:08

Only add the touchpad and sensors to the PS5 controller if effects are enabled

4ec776c3

2020-12-22T13:29:23

Don't switch the PS5 controller out of DirectInput mode by default

b4b674da

2020-12-22T22:10:50

CMakeLists.txt: sync DYLIB_CURRENT_VERSION to Xcode project

350f1b0d

2020-12-22T10:36:15

Updated SDL to version 2.0.15 for development

13244de5

2020-12-22T17:17:30

[Buildsystem] Only build KMSDRM support if EGL+OpenGL is detected by CMake.

a19c008a

2020-12-22T17:10:02

use GetModuleHandleW() to retrieve kernel32.dll handle (bug #5390.) SDL_systhread.c and SDL_syslocale.c used to call LoadLibrary() without calling FreeLibrary() later. GetModuleHandleW() should always succeed because GetModuleHandleW() itself is imported from kernel32.dll and we don't need to bother releasing it.

9f655fe5

2020-12-22T17:03:20

regenerated configure

5ad56457

2020-12-22T17:01:50

acinclude/pkg.m4: update from mainstream pkgconfig tree.

86191351

2020-12-22T17:00:28

acinclude & sdl2.m4 updates: - acinclude/alsa.m4, esd.m4: Ran through autoupdate to replace several AC_TRY_[COMPILE|LINK|RUN] with corresponding AC_???_IFELSE , so that autoconf-2.70 doesn't warn. - sdl2.m4: Ditto. - test/acinclude.m4 (sdl2): Ditto.

f117db51

2020-12-22T17:00:11

sdl2.m4 updates: - remove HP/UX 9 (%@#!) support - change fopen() mode from "a" to "w" in test code. - bump its serial num to 2. - test/acinclude.m4: same sdl2.m4 updates.

087de97b

2020-12-22T17:00:00

acinclude/esd.m4: update from mainstream esound tree, - revise for better compatibility with new autoconf, - remove HP/UX 9 (%@#!) support from it, - replace system("touch conf.esdtest") with fopen/fclose in the test code (see, e.g. glib-2.0.m4 -- sdl.m4 does the same.)

15abab9c

2020-12-22T16:25:00

regenerated configure

2fc987c2

2020-12-22T14:15:33

[Buildsystem] Add guards for not building with KMSDRM support if EGL is not available.

05dcec0a

2020-12-21T14:43:38

Added tag release-2.0.14 for changeset 97dfa8874ea0

4cd98160

2020-12-21T09:44:25

Fixed whitespace

537f824f

2020-12-21T20:40:10

test/Makefile.os2: wlib must run case-sensitively.

8766d604

2020-12-21T17:29:24

[Video/KMSDRM] Fix potetial access to freed structure and complete errorchecks.

b06ef3a1

2020-12-21T01:53:11

[Video/KMSDRM] Manually re-show the cursor on window creation, if needed.

4198f0e5

2020-12-21T01:20:30

fix uninitialized warnings in KMSDRM_CreateCursor()

a8dbcab1

2020-12-20T21:48:05

[Video/KMSDRM] Don't copy the cursor bitmap to the cursor GBM BO until we're showing it.

67e9132d

2020-12-20T12:22:28

Fixed circular dependency problem when building in the test directory

ee180efd

2020-12-20T12:08:49

Fixed bug 5406 - Upstreaming DragonFlyBSD changes from DeltaPorts (patch from David Carlier)

22275b35

2020-12-20T21:55:02

cmake: fix building for mac (bug #5407.)

2756b0f3

2020-12-20T14:29:58

[Video/KMSDRM] Init and deinit mouse stuff at the same time that GBM stuff.

e91153f2

2020-12-20T03:03:21

fix non-ARM h/w on FreeBSD builds (bug #5405, patch from David Carlier.)

cf71e017

2020-12-19T23:32:09

[Video/KMSDRM] Remove auxiliary AMDGPU compatibility workarounds not needed anymore.

af1f91cb

2020-12-19T20:21:07

[Video/KMSDRM] Correct typo.

cf489556

2020-12-19T20:15:50

[Video/KMSDRM] Honor the device index in Vulkan. Add notes about the display index.

ab3a390e

2020-12-19T17:35:04

[Video/KMSDRM] Better ATOMIC caps testing: patch by Oskan Sezer.

436499f3

2020-12-19T02:08:59

[Video/KMSDRM] Comment out some debug info, adjust comments for future work.

6b81cac4

2020-12-19T01:25:50

remove duplicated SDL_SetError after calling check_atomic_modesetting()

8952a613

2020-12-18T23:17:42

[Video/KMSDRM] Re-arrange display members setup.

f60f8d5d

2020-12-18T22:53:51

[Video/KMSDRM]: Add Vulkan support to the KMSDRM backend.

cbe13d23

2020-12-18T13:10:36

Fixed controller hotplug detection when joystick thread is not enabled

6ac0b23d

2020-12-18T21:37:20

SDL_DirectFB_video.c: DSPF_ABGR requires directfb >= 1.5.0 -- add guard.

f0577bc9

2020-12-18T10:09:06

ControllerList: setup the ps5 default deadzone to match PS4 instead of defaulting to same a XboxOne/Switch

5f7cd1fa

2020-12-18T10:08:59

Added hints to control whether SDL updates joystick and sensor state in the main event loop

6c4ab484

2020-12-18T17:50:02

SDL_kmsdrmvideo.c: check atomic modesetting in check_modesetting() .. so that KMSDRM_CreateDevice() can fail and SDL_VideoInit() would move on to next bootstrap member which is kmsdrm_legacy. hopefully fixes bug #5393.

5c654d0d

2020-12-18T17:00:00

tests: regenerate configure using autoconf patched for AC_PATH_X11 Specifically this patch which does not invoke _AC_PATH_X_XMKMF and _AC_PATH_X_DIRECT internal autoconf routines when cross-compiling: http://git.savannah.gnu.org/gitweb/?p=autoconf.git;a=commitdiff;h=33c3a47c04ab70a4dd54963fe433a171bc03747f Without this, CFLAGS would brokenly have system include paths like -I/usr/include/X11 when cross-compiling e.g. for windows. (And it also resulted in annoying imake crashes for my setup...)

6bd4c717

2020-12-17T21:41:23

Fixed bug 5402 - ARM support little update proposal David Carlier No fix but mostly an update for ARM architecture.

10625f9d

2020-12-17T23:50:00

SDL_windowsmessagebox.c: go back to hg rev 14458 state. encountering a NULL caption in AddDialogString() is intended, i.e. AddDialogStaticIcon() sends it as NULL on purpose.

4d6eb305

2020-12-17T23:28:20

SDL_windowsmessagebox.c (AddDialogControl): add back NULL caption check. because AddDialogStaticIcon() sends a NULL caption -- fixes bug #5401.

90456670

2020-12-17T14:11:00

more "'for' loop initial declarations are only allowed in C99 mode" fixes

ed4fcb2c

2020-12-16T03:24:10

kmsdrm_legacy build fixes: - add missing '_LEGACY' to symbol names - perform missing 2.0.14 portage - fix 'for' loop initial declarations are only allowed in C99 mode errors

f484abbd

2020-12-15T14:57:51

Added Android mapping for the Xbox One Series X controller over Bluetooth

cdd39711

2020-12-15T14:57:49

Fixed the Xbox Series X controller showing up twice on Android

14f97734

2020-12-15T14:57:47

Fixed whitespace

9940e710

2020-12-16T00:10:30

Import two post-2.0.12 fixes to kmsdrm_legacy: Fix build breakage without EGL: https://hg.libsdl.org/SDL/rev/f2606fe53654e305ab9badb821d9d3afb7f92f49 Fix KMSDRM_CreateWindow segfault when starting L?VE2D engine (bug 5199) https://hg.libsdl.org/SDL/rev/d2e69a78939463d9ff9448a5f4efd1e208bb97b0

f8839289

2020-12-15T12:22:48

Potential fix for bug 5393 - KMSDRM: using atomic mode setting breaks GPU compatibility Substring I was trying the KMSDRM video backend with some very simple programs that were working ok on 2.0.12. The same code won?t work on the current dev branch and I get: DEBUG: check_modesetting: probing ?/dev/dri/card0? DEBUG: /dev/dri/card0 connector, encoder and CRTC counts are: 4 5 6 DEBUG: check_modesetting: probing ?/dev/dri/card0? DEBUG: /dev/dri/card0 connector, encoder and CRTC counts are: 4 5 6 DEBUG: KMSDRM_VideoInit() DEBUG: Opening device /dev/dri/card0 DEBUG: Opened DRM FD (3) DEBUG: no atomic modesetting support. DEBUG: Video subsystem has not been initialized INFO: Using SDL video driver: (null) DEBUG: Video subsystem has not been initialized After carefully checking, the radeon driver doesn?t support atomic modesetting. That?s not the only problem : the same happens with the amdgpu driver if we disable Display Core (kernel parameter amdgpu.dc=0, which is required to get analogue outputs working). This is a major regression in the KMSDRM driver. Using atomic mode setting is great, but having no fallback to the "standard KMS" is bad.

c02d88dd

2020-12-15T23:01:10

configury whitespace cleanup (no actual change.)

6cb78120

2020-12-15T00:42:17

Fixed bug 5399 - make install is broken as it depends on missing rule `build` Stephen Broadfoot I've tracked this down to the following changeset bb65ba8e039b https://hg.libsdl.org/SDL/diff/bb65ba8e039b/Makefile.in this changeset renames the rule `build` to `build/.created` but the rule `install-lib` still depends on the rule `build` This affects users who are trying to install via homebrew who are installing via source and not by the bottle as this invokes `make install` To be clear, the error I was hitting when running make install is make: *** No rule to make target `build', needed by `install-lib'. Stop.

716ac535

2020-12-15T01:20:00

test/acinclude.m4: rename SDL_CONFIG to SDL2_CONFIG, regenerate configure

637d425e

2020-12-15T00:11:10

whitespace.

e65e4fd3

2020-12-14T09:48:51

Fixed detecting the guide button on Xbox One S controllers over Bluetooth on Linux

f1c7cc71

2020-12-14T12:36:04

winrt: Buildfix for older UWP SDKs

bfffa275

2020-12-14T09:23:53

Fixed bug 5397 - Fcitx input is truncated sowfelicity Split the long text input event into multiple shorten text input event.

8795ca70

2020-12-14T09:15:47

Fixed bug 5241 - SDL on Linux needs a way to turn deadzones off pj5085 I added some printf to verify the math being done. Of the three joysticks I have, it works correctly for at least two, and seems to work correctly for the third. I say "seems to" because, for the third joystick, the values never go through the AxisCorrect function, and thus never hit my printf statements, even though they did in the version I wrote my patch against. I'm not sure what's going on there, but it at least seems to be working correctly in as much as I can tell. I note this result in particular, for an SNES Gamepad (min=0, max=255): Joystick value 0 becomes -32768 Joystick value 127 becomes 0 Joystick value 255 becomes 32767 Without the code that forces a zero point, the 127 input value would become -129, so I think you see why I added that code to turn it into zero. However, I think Kai Krakow has a point about how SDL shouldn't assume that there should be a center. Obviously in the majority of cases there actually should be a center, and the code that turns that 127 into an actual 0 is creating only a 0.2% error over 0.4% of this joystick's range. However, what if there is an axis that is some kind of special control, like a 4-position switch, and, for whatever reason, the joystick reports it as an axis with 4 possible values, 0 to 3? In that case, mutilating the two center values to the same value is much more of an error and and turns that 4-position switch into a 3-position switch. If any joystick does this with a 2-position switch, then this code would render that control entirely useless as it would report the same value with the switch in either position. Obviously the code could require that there be at least N possible values, to guess whether something is a proper axis or just some kind of switch, but the choice of N would be arbitrary and that's ugly. I guess the real problem here is that my gamepad is just kind of broken. It should be reporting a range of -1 to +1 since that's what it actually does. Also, as Kai Krakow points out, it's probably not SDL's place to fix broken hardware. I'll add that, if SDL does fix broken hardware, it should probably actually know that it's broken rather than be merely guessing that it is. So, to the extent that SDL is able to do stuff like this, perhaps it's something better left for the user to configure in some kind of config file.

169cfe5a

2020-12-14T11:52:09

winrt: EffectiveLocation still needs an ifdef, IsApiContractPresent is for runtime

44d4a61d

2020-12-14T08:11:40

minor cleanups to configure.ac to reduce autoconf-2.70 warnings a bit. configure output is practically unchanged. there are still lots of AC_TRY_COMPILE/AC_TRY_LINK replacements needed to really eliminate the warnings, but that's for another time.

f8078d3d

2020-12-14T05:55:20

configure.ac: use AC_DEFINE for SDL_VIDEO_DRIVER_ANDROID

3c2757ff

2020-12-13T18:25:02

windows SDL_LoadObject: fix warning after commit 2ff650230d96

15cbddf4

2020-12-13T18:00:20

linux/SDL_threadprio.c: fix build on older systems: SCHED_RESET_ON_FORK is in kernel >= 2.6.32.

3b92933a

2020-12-13T17:37:50

SDL_LoadObject (windows, os/2): prevent crash if dll name is NULL.

f674009c

2020-12-13T16:51:20

fix typo from commit 63349df2610a (fixes bug 5396)

b6e63625

2020-12-13T15:32:24

fix bug #5395: handle old systems where inotify_init1 is not available

ee85a41a

2020-12-13T02:10:46

Fixed compile warning

64f448b2

2020-12-13T02:01:39

libusb hid.c is already included in SDL_hidapi.c

706f6375

2020-12-13T01:58:05

Fixed build for platforms with only libusb hidapi implementations

80e5c689

2020-12-13T01:20:38

Fixed the PS5 controller not disconnecting when powered off

c8ee0691

2020-12-13T00:15:54

Added SDL_misc.h to the Xcode built frameworks

ce7c751c

2020-12-12T23:54:40

Document that the joystick deadzone hint defaults off

db0a2025

2020-12-12T23:48:02

Fixed bug 5241 - SDL on Linux needs a way to turn deadzones off pj5085 It occurred to me that my simple patch that comments out a few lines of code does not correctly remove the dead zone since the calculation presumably assumes the dead zone has been cut out of the range. Then, while looking into how to make it output the correct range of values, I realized SDL wasn't returning the correct range of values to begin with. This line of code was already present: printf("Values = { %d, %d, %d, %d, %d }\n", absinfo.value, absinfo.minimum, absinfo.maximum, absinfo.fuzz, absinfo.flat); For my joystick this yeilds: Values = { 0, -127, 127, 0, 15 } Then this code calculates the coefficients: In SDL1: joystick->hwdata->abs_correct[i].coef[0] = (absinfo.maximum + absinfo.minimum) / 2 - absinfo.flat; joystick->hwdata->abs_correct[i].coef[1] = (absinfo.maximum + absinfo.minimum) / 2 + absinfo.flat; t = ((absinfo.maximum - absinfo.minimum) / 2 - 2 * absinfo.flat); if ( t != 0 ) { joystick->hwdata->abs_correct[i].coef[2] = (1 << 29) / t; } else { joystick->hwdata->abs_correct[i].coef[2] = 0; } In SDL2: joystick->hwdata->abs_correct[i].coef[0] = (absinfo.maximum + absinfo.minimum) - 2 * absinfo.flat; joystick->hwdata->abs_correct[i].coef[1] = (absinfo.maximum + absinfo.minimum) + 2 * absinfo.flat; t = ((absinfo.maximum - absinfo.minimum) - 4 * absinfo.flat); if (t != 0) { joystick->hwdata->abs_correct[i].coef[2] = (1 << 28) / t; } else { joystick->hwdata->abs_correct[i].coef[2] = 0; } Neither calculates the correct coefficients for the code in the AxisCorrect function. In SDL1: if ( value > correct->coef[0] ) { if ( value < correct->coef[1] ) { return 0; } value -= correct->coef[1]; } else { value -= correct->coef[0]; } value *= correct->coef[2]; value >>= 14; In SDL2: value *= 2; if (value > correct->coef[0]) { if (value < correct->coef[1]) { return 0; } value -= correct->coef[1]; } else { value -= correct->coef[0]; } In SDL1, the calculated coefficients are coef[0]=15, coef[1]=-15 and coef[2]=5534751. So with a full-scale input of 127, it calculates an output value of 37835, which is considerably out of range. In SDL2, the calculated coefficients are coef[0]=30, coef[1]=-30, and coef[2]=1383687. So with a full-scale input of 127, it calculates the same output value of 37835. I tested it with the 3 joysticks I have, and it produces out-of-range values for all of them. Anyway, since dead zones are garbage, I just deleted all of that junk and wrote some code that takes the absinfo.minimum and absinfo.maximum values and uses them to scale the axis range to -32767 through +32767. I also made it detect when a range doesn't have an integer center point, e.g. the center of -128 to + 127 is -0.5. In such cases, if either value to the side of the center is provided, it zeros it, but it otherwise doesn't implement any kind of dead zone. This seemed important with my gamepad which provides only the values of 0, 127, and 255, since without this hack it would never be centered. Also, the previous minimum output value was -32768, but as that creates an output range that has no true center, I changed the minimum value to -32767. I tested it with the 3 joystick devices I have and it seems to create correct values for all of them.

0ccb3afd

2020-12-12T22:33:11

Fixed polling values after SYN_DROPPED event

9ee0e888

2020-12-12T22:11:00

Whoops, make the hint actually default to false

13a4caf1

2020-12-12T22:08:02

Fixed bug 4286 - Joystick subsystem causes "not responding" when app is in the background Added a hint to control whether a separate thread should be used for joystick events. This is off by default because dispatching messages in other threads appears to cause problems on some versions of Windows.

bca9decb

2020-12-12T23:28:10

fix bug #5394 - define _DARWIN_C_SOURCE only if not already defined

5c212cb0

2020-12-10T12:24:24

remove a few stale NULL message/title checks after commit e2b729b1756a top-level guarantees non-NULL message / title passed in messageboxdata

f1cab8ae

2020-12-10T11:20:56

fix bug #5253: handle NULL title or message fields in SDL_MessageBoxData - SDL_video.c (SDL_ShowMessageBox): replace messageboxdata, set title or message field to "" if either of them is NULL. - SDL_video.c (SDL_ShowSimpleMessageBox): set title or message to "" if either of them is NULL for EMSCRIPTEN builds. - SDL_bmessagebox.cc: add empty string check along with NULL check for title and message fields. - SDL_windowsmessagebox.c (AddDialogString): remove NULL string check - SDL_windowsmessagebox.c (AddDialogControl): add empty string check along with the NULL check. - SDL_x11messagebox.c: revert commit 677c4cd68069 - SDL_os2messagebox.c: revert commit 2c2a489d76e7 - test/testmessage.c: Add NULL title and NULL message tests.

eec73dfd

2020-12-09T20:31:00

configure.ac (CheckJoystickMFI): changed AC_TRY_COMPILE to AC_TRY_LINK so as to discover GameController and CoreHaptics frameworks at compile time.

797a6910

2020-12-09T20:28:51

Fixed bug 5375 - WGI: Fix HSTRING memory leak. Joel Linn TLDR; https://godbolt.org/z/43fd8G Let's deduce this from C++ reference code: https://docs.microsoft.com/en-us/cpp/cppcx/wrl/how-to-activate-and-use-a-windows-runtime-component-using-wrl?view=msvc-160 At the bottom of the page there is this snippet: ``` int wmain() { /* ... more code ... */ // Get the domain part of the URI. HString domainName; hr = uri->get_Domain(domainName.GetAddressOf()); if (FAILED(hr)) { return PrintError(__LINE__, hr); } // Print the domain name and return. wprintf_s(L"Domain name: %s\n", domainName.GetRawBuffer(nullptr)); // All smart pointers and RAII objects go out of scope here. } ``` `HString` is defined in `corewrappers.h` and the call chain for the destructor is: `~HString() -> Release() -> ::WindowsDeleteString()` QED

d3d2aee7

2020-12-09T10:39:36

Fixed the name of the PS5 hint

a77a0715

2020-12-09T07:50:15

Disabled raw input debug output

d46dd103

2020-12-09T07:49:07

Fixed typo in Vulkan load logic

45e3521d

2020-12-09T07:32:10

Backed out changes for 5366 - cmake build doesn't detect Metal on macOS These changes introduce regressions for other build environments, so I'm backing them out until we sort out the correct fix.

bd032c1f

2020-12-09T07:26:59

Fixed bug 5221 - libusb isn't detected correctly in CMake Sven-Hendrik Haase In CMake I currently have trouble activating hidapi support as libusb-1.0 isn't ever correctly detected as it's searched for by the wrong name. configure.ac correctly does this: PKG_CHECK_MODULES([LIBUSB], [libusb-1.0], have_libusb=yes, have_libusb=no) However, sdlchecks.cmake does this: pkg_check_modules(LIBUSB libusb) but it needs to be: pkg_check_modules(LIBUSB libusb-1.0)

kc3-lang/SDL

Log