kmx git

Commit	Date	Message
5f341620	2019-05-19T12:06:58	Fixed bug 4474 - Add support for an ASUS Gamepad variation Trent Gamblin This patch adds a variation of the ASUS Gamepad to the game controller DB. All the values are the same except the GUID.
41c718db	2019-05-19T12:04:06	Fixed bug 4469 - make SDL_CreateTextureFromSurface pick a more appropriate format Sylvain Currently SDL_CreateTextureFromSurface picks first valid format, and do a conversion. format = renderer->info.texture_formats[0]; for (i = 0; i < renderer->info.num_texture_formats; ++i) { if (!SDL_ISPIXELFORMAT_FOURCC(renderer->info.texture_formats[i]) && SDL_ISPIXELFORMAT_ALPHA(renderer->info.texture_formats[i]) == needAlpha) { format = renderer->info.texture_formats[i]; break; It could try to find a better format, for instance : if SDL_Surface has no Amask, but a colorkey : if surface fmt is RGB888, try to pick ARGB8888 renderer fmt if surface fmt is BGR888, try to pick ABGR8888 renderer fmt else try to pick the same renderer format as surface fmt if no format has been picked, use the fallback. I think it goes with bug 4290 fastpath BlitNtoN when you expand a surface with pixel format of size 24 to 32, there is a fast path possible. So with this issue: - if you have a surface with colorkey (RGB or BGR, not palette), it takes a renderer format where the conversion is faster. (it avoids, if possible, RGB -> ABGR which means switching RGB to BGR) - if you have a surface ABGR format, it try to take the ABGR from the renderer. (it avoids, if possible, ABGR -> ARGB, which means switch RGB to BGR)
c377de54	2019-05-19T11:56:26	Fixed bug 4436 - [OpenBSD] fix D-pad Thomas Frohwein Hi, If a gamepad lists the Dpad as 4 buttons (Dpad Up,Down, Left, Right) like with the Xbox 360 gamepad / XInput report descriptor used by OpenBSD (https://github.com/openbsd/src/blob/master/sys/dev/usb/uhid_rdesc.h#L184), this is not recognized by the SDL BSD backend and no hat or any other listing for the D-pad exists, e.g. in sdl2-jstest (https://gitlab.com/sdl-jstest/sdl-jstest). The attached diff fixes this and makes the D-pad on my Xbox 360 and Logitech F310 controllers usable. It adds a hat to nhats when usage HUG_DPAD_UP is found, reads the state of the D-pad buttons into array dpad[], and turns the value of dpad[] into an SDL hat direction (dpad_to_sdl()). Tested and works with Xbox 360 controller and Logitech F310 in XInput mode. Software-side tested with sdl2-jstest and Owlboy where this worked without problems or regressions. I don't know if this would be applicable to other *BSDs and don't have an install to test it with, therefore wrapped it in __OpenBSD__ ifdefs. Thanks, thfr
ee0a482a	2019-05-19T11:52:25	Fixed bug 4401 - SDL_GetWindowPosition() wrong after SDL_SetWindowPosition() until window is moved on macOS Removed incorrect call to SDL_SendWindowEvent(window, SDL_WINDOWEVENT_MOVED, x, y); If the position of the window isn't adjusted in the SetWindowPosition() call, then sending the window event would have no effect because x and y equals the window x and y. If the position of the window is adjusted in the SetWindowPosition() call, then we don't want to clobber it with values that the user passed in.
2ee9b1dd	2019-05-19T11:01:36	Fixed bug 4025 - SDL_Renderer OpenGL : add support for textures ABGR, RGB, BGR Sylvain OpenGLES2 SDL renderer has support for textures ARGB, ABGR, RGB and BGR, whereas OpenGL SDL renderer only had ARGB. If you think it's worth adding it, here's a patch. I quickly tried and it worked, but there may be missing things or corner case.
8dea23c7	2019-05-19T10:44:14	Fixed bug 3911 - SYSWM generic X11 events missing event data Andrei Drexler For X11 GenericEvents, the associated data is only available between a call to XGetEventData and the matching XFreeEventData, i.e. in X11_HandleGenericEvent. Trying to call XGetEventData a second time on the same event will fail, so an application that wants to inspect XInput2 events (e.g. for stylus pressure) has no way of retrieving its data from queued SYSWM events. The attached patch (based on SDL-2.0.7-11629) sends SYSWM messages from X11_HandleGenericEvent while the data is still available, allowing client code to register an event filter/watcher and process the event inside the callback.
29f34453	2019-05-19T10:36:44	video: Add Vulkan support for vivante fb Vivante drivers use the VK_KHR_display extension for rendering directly to the frame buffer. This patch adds support to the video driver for Vulkan rendering using that method. - Add an utility function SDL_Vulkan_Display_CreateSurface that creates a surface using this extension. The display to use (if there are multiple) can be overridden using the environment variable "SDL_VULKAN_DISPLAY". - Use this function in a new compilation unit SDL_vivantevideo.c, which implements the SDL_VIDEO_VULKAN methods of the driver structure.
00e5eeb4	2019-05-19T01:45:15	test: added SDLTest_CommonDefaultArgs() This is for test apps that don't need custom command line arguments; it lets us reduce the boilerplate code a tiny bit.
62a57970	2019-05-15T14:01:15	Windows are not in a minimized state when they are shown This fixes https://github.com/ValveSoftware/steam-for-linux/issues/4313 "Exiting game a in Steam Big Picture Mode gets semi-windowed BPM"
abcfe804	2019-05-14T14:20:54	[SDL] iOS fix bug with audio interrupted by a phone call not restoring.
59da5b72	2019-05-14T07:55:42	[SDL] ios Touch Fix.
ba0fc92d	2019-05-11T12:41:21	Patched to compile.
6eb05211	2019-05-09T12:09:45	Emscripten: Use EMSCRIPTEN_EVENT_TARGET_*
4e5b5cba	2019-05-09T12:09:40	Emscripten: Switch from canvas[XY] to target[XY] Allows mouse/touch events to work on non-default canvases
60c48ed7	2019-05-09T12:09:34	Emscripten: Store canvas id in WindowData Also replace all hardcoded uses of "#canvas" or NULL
f0a4fea8	2019-04-25T14:17:07	Fixed bug 4608 - Android: not getting SDL_WINDOWEVENT_FOCUS_GAINED on start of our app Dan Ginsburg I've seen this on several devices including Moto Z running Android 7 and a Snapdragon 845 running Android 9. What happens is as follows: SDLActivity.onWindowFocusChanged(true) happens pretty early on, but it's before we've done SDL_CreateWindow and so Android_Window is 0x0 thus this message does not get sent: JNIEXPORT void JNICALL SDL_JAVA_INTERFACE(nativeFocusChanged)( JNIEnv env, jclass cls, jboolean hasFocus) { SDL_LockMutex(Android_ActivityMutex); if (Android_Window) { __android_log_print(ANDROID_LOG_VERBOSE, "SDL", "nativeFocusChanged()"); SDL_SendWindowEvent(Android_Window, (hasFocus ? SDL_WINDOWEVENT_FOCUS_GAINED : SDL_WINDOWEVENT_FOCUS_LOST), 0, 0); } SDL_UnlockMutex(Android_ActivityMutex); } When the window does get created, in Android_CreateWindow it does this: window->flags &= ~SDL_WINDOW_RESIZABLE; / window is NEVER resizeable / window->flags &= ~SDL_WINDOW_HIDDEN; window->flags \|= SDL_WINDOW_SHOWN; / only one window on Android / window->flags \|= SDL_WINDOW_INPUT_FOCUS; / always has input focus / / One window, it always has focus / SDL_SetMouseFocus(window); SDL_SetKeyboardFocus(window); The SDL_SetKeyboardFocus does send an SDL_WINDOWEVENT_FOCUS_GAINED message, but it gets eaten in SDL_SendWindowEvent because we've forced SDL_WINDOW_INPUT_FOCUS beforehand: case SDL_WINDOWEVENT_FOCUS_GAINED: if (window->flags & SDL_WINDOW_INPUT_FOCUS) { return 0; } window->flags \|= SDL_WINDOW_INPUT_FOCUS; SDL_OnWindowFocusGained(window); break; I can fix the problem if I comment out this line from Android_CreateWindow: window->flags \|= SDL_WINDOW_INPUT_FOCUS; / always has input focus */ I would propose that as a fix unless there is a reason not to.
f79190f4	2019-04-23T07:59:31	Use _Exit() when available
2c92c8e8	2019-04-23T14:24:58	Android: add static variable initialization in non blocking event loop
cb18117c	2019-04-22T16:34:42	Added a helper function to tell whether or not a window can be minimized
f1b57f37	2019-04-22T16:25:49	Only leave fullscreen mode if we're actually going to minimize
9950271b	2019-04-22T16:19:52	Fixed bug 4580 - Android 8: immersive fullscreen notification causes flickering between fullscreen and non-fullscreen and app is unresponsive Sylvain 2019-04-18 21:22:59 UTC Changes: - SDL_WINDOWEVENT_FOCUS_GAINED and SDL_WINDOWEVENT_FOCUS_LOST are sent when the java method onWindowFocusChanged() is called. - If we have support for MultiWindow (eg API >= 24), SDL event loop is blocked/un-blocked (or simply egl-backed-up or not), when java onStart()/onStop() are called. - If not, this behaves like now, SDL event loop is blocked/un-blocked when onPause()/onResume() are called. So if we have two app on screen and switch from one to the other, only FOCUS events are sent (and onPause()/onResume() are called but empty. onStart()/onStop() are not called). The SDL app, un-focused, would still continue to run and display frames (currently the App would be displayed, but paused). Like a video player app or a chronometer that would still be refreshed, even if the window hasn't the focus. It should work also on ChromeBooks (not tested), with two apps opened at the same time. I am not sure this fix Dan's issue. Because focus lost event triggers Minimize function (which BTW is not provided on android). https://hg.libsdl.org/SDL/file/bb41b3635c34/src/video/SDL_video.c#l2653 https://hg.libsdl.org/SDL/file/bb41b3635c34/src/video/SDL_video.c#l2634 So, in addition, it would need to add by default SDL_HINT_VIDEO_MINIMIZE_ON_FOCUS_LOSS to 0. So that the lost focus event doesn't try to minimize the window. And this should fix also the issue.
90b08881	2019-04-17T20:41:05	iOS: Remove code trying to support compilation on the iOS 7 SDK, the deployment target has been set to iOS 8 for years and there's other unconditionally compiled code that depends on newer SDKs so that code is useless.
9d7b2615	2019-04-17T20:14:40	macOS: Fix compilation when using the 10.9 SDK or older.
bd344c22	2019-04-12T23:15:26	Android: when event loop is not blocking in pause, backup EGL context (Bug 4578) Backup the EGL context when SDL_APP_DIDENTERBACKGROUND has been removed from the event queue.
00c824a8	2019-04-10T22:30:58	Fix disabling OpenGL vsync on macOS 10.14.4+ (bug #4575).
aae49015	2019-04-10T10:59:53	Fixed bug 4581 - generate synthetic mouse events at window boundaries when real touch events are actually outside the window.
cfefe543	2019-04-08T21:27:24	Fixed bug 4581 - mouse events with SDL_TOUCH_MOUSEID make window lost focus Virtual mouse events should never leave the window or change focus for single window applications.
d68e501d	2019-04-08T13:43:48	Fixed bug 4582 - Maximize/Resize not working on Windows 10 When viewport is set, projectionAndView changes, but ID3D11DeviceContext_UpdateSubresource was not called.
eb7affee	2019-04-06T21:52:51	SDL_HINT_MOUSE_TOUCH_EVENTS: move tracking appart in case of 'window' is null
a1a9fd50	2019-04-06T21:43:16	Bug 4581: move tracking appart so it doesn't require the window to have focus
a46af76b	2019-04-05T08:15:01	Fixed bug 4579 - SDL_android.c s_active not being atomic Isaias Brunet This bug cause a false assert due to multiple threads modifying the same variable without any atomic operation.
9eac91dd	2019-04-05T08:10:12	Set SDL_HINT_MOUSE_TOUCH_EVENTS for iPhone and iPad as well
b6f33a68	2019-04-05T07:51:11	https://bugzilla.libsdl.org/show_bug.cgi?id=4577 SDL_GetWindowDisplayMode was returning an incorrect result on iPhone Plus devices (tested on iOS 12.1/12.2). The problem was that the value returned by UIScreenMode was assumed to be the physical pixels on the display, rather than the scaled retina pixels. The fix is to use the scale returned by UIScreen.scale rather than the nativeScale.
05333a6e	2019-04-05T09:16:30	Android: add hint SDL_HINT_ANDROID_BLOCK_ON_PAUSE to set whether the event loop will block itself when the app is paused.
b470cd9b	2019-04-05T08:36:31	Android: default SDL_HINT_MOUSE_TOUCH_EVENTS to 1 as previous behaviour
bfdd0b22	2019-04-04T17:01:02	Android: remove SDL_HINT_ANDROID_SEPARATE_MOUSE_AND_TOUCH java layer runs as if separate mouse and touch was 1, Use SDL_HINT_MOUSE_TOUCH_EVENTS and SDL_HINT_TOUCH_MOUSE_EVENTS for generating synthetic touch/mouse events
e4157618	2019-04-04T16:51:50	Add hint SDL_HINT_MOUSE_TOUCH_EVENTS for mouse events to generate touch events controlling whether mouse events should generate synthetic touch events By default SDL will not generate touch events for mouse events
ab03892d	2019-04-04T15:19:00	Bug 4576: track both FingerId and TrackId
e39c0a1f	2019-04-03T10:14:42	Bug 4576: fix wrong scaling
236b8606	2019-04-02T18:07:27	Bug 4576: one more warning
b45abbb2	2019-04-02T17:57:27	Bug 4576: fix warning and compile
9b3c2258	2019-04-02T17:23:55	Bug 4576: remove touch/mouse duplication for Android
9d28156f	2019-04-02T17:18:47	Bug 4576: remove touch/mouse duplication for IOS
42de5f97	2019-04-02T17:13:22	Bug 4576: remove touch/mouse duplication for WinRT
b086edc9	2019-04-02T17:10:29	Bug 4576: remove touch/mouse duplication for Emscripten
b8e5c561	2019-04-02T17:07:54	Bug 4576: remove touch/mouse duplication for Wayland
6bc2d9de	2019-04-02T17:03:58	Bug 4576: remove touch/mouse duplication for linux/EVDEV
1a4c3b57	2019-04-02T16:58:11	Bug 4576: remove touch/mouse duplication for Windows
a3f2c446	2019-04-02T16:46:17	Bug 4576: handle mapping of TouchEvents to MouseEvents at higher level
9a8d5215	2019-03-27T08:17:05	Handle potentially calling SDL_JoystickUpdate() and SDL_JoystickQuit() at the same time.
2fbfe8b9	2019-03-25T12:59:30	coreaudio: Set audio callback thread priority. Fixes Bugzilla #4155.
6a3356ab	2019-03-25T12:24:38	Backed out changeset cec31de4e126 This was meant to migrate CoreAudio onto the same SDL_RunAudio() path that most other audio drivers are on, but it introduced a bug because it doesn't deal with dropped audio buffers...and fixing that properly just introduces latency. I might revisit this later, perhaps by reworking SDL_RunAudio to allow for this sort of API better, or redesigning the whole subsystem or something, I don't know. I'm not super-thrilled that this has to exist outside of the usual codepaths, though. Fixes Bugzilla #4481.
8ab698af	2019-03-21T10:39:49	opengles2: Fix static analysis warning. Not clear if this could ever dereference NULL in real life, but better safe than sorry!
01c924fa	2019-03-19T17:20:54	Hopefully fixed the mingw32 build
deb7d08c	2019-03-19T17:05:22	Fixed Visual Studio build
ac23d78f	2019-03-19T16:53:55	Didn't need to add SDL_windows.h include, that was already included
b2e76d86	2019-03-19T16:52:09	Fixed Windows RT build
de82759c	2019-03-19T07:53:33	Added support for building SDL as a dynamic library on iOS
f07c992b	2019-03-17T12:36:40	hidapi: Add GCN L/R buttons, just in case someone wants them...
6311c7cf	2019-03-16T19:08:59	emscripten: force resize event when pixel ratio changes Without this, applications can't react to changed canvas size on window zoom.
b8bd0aa0	2019-03-16T19:07:34	Fixed bug 4450 - SDL_mouse.c fails to compile with CMake generated Visual Studio files if SDL_VIDEO_VULKAN 0/undefined Max Waine SDL_mouse.c, if compiled for Windows, requires GetDoubleClickTime to compile (available from winuser.h). Without Vulkan present this fails to compile as the include chain for winuser.h is the following. SDL_mouse.c -> SDL_sysvideo.h -> SDL_vulkan_internal.h -> SDL_windows.h -> windows.h -> winuser.h. Problem is that SDL_vulkan_internal.h doesn't include SDL_windows.h if Vulkan isn't present, so under MinGW/GCC it will give a -Wimplicit-function-declaration warning for GetDoubleClickTime, and under MSVC fails to compile completely. The solution to this would be to simplify the include chain: including SDL_windows.h under the same condition as GetDoubleClickTime (#ifdef __WIN32__) in SDL_mouse.c (or another file that isn't quite so indirectly included).
faf97978	2019-03-16T19:03:13	Fixed bug 4511 - SDL_gamecontrollerdb Mapping for Sony Playstation USB controller Renaud Lepage Simply submitting a new mapping.
35255342	2019-03-16T18:48:21	Fixed bug 4525 - Fix crash in ALSA_HotplugThread caused by bad return value check Anthony Pesch Fix snd_device_name_hint return value check According to the ALSA documentation, snd_device_name_hint returns 0 on success, otherwise a negative error code. The code previously only considered -1 to be an error, which let other error codes through resulting in a segfault when hints (which was NULL) was dereferenced
8bc59f87	2019-03-16T18:34:33	Fixed CVE-2019-7635 and bug 4498 - Heap-Buffer Overflow in Blit1to4 pertaining to SDL_blit_1.c Petr Pisar The root cause is that the POC BMP file declares 3 colors used and 4 bpp palette, but pixel at line 28 and column 1 (counted from 0) has color number 3. Then when the image loaded into a surface is passed to SDL_DisplayFormat(), in order to convert it to a video format, a used bliting function looks up a color number 3 in a 3-element long color bliting map. (The map obviously has the same number entries as the surface format has colors.) Proper fix should refuse broken BMP images that have a pixel with a color index higher than declared number of "used" colors. Possibly more advanced fix could try to relocate the out-of-range color index into a vacant index (if such exists).
0f148eb6	2019-03-16T18:12:26	Fix polling left trigger reporting right trigger's values.
58ca76be	2019-03-16T18:11:09	Fix DirectInput error codes being lost
12c5cda6	2019-03-16T00:08:19	Fix compiler warnings.
f95ca7bb	2019-03-15T16:13:19	events: Disable all the signal-handling code on platforms without support. So on Windows, for example, this mostly becomes a few empty functions.
8a5a05c1	2019-03-15T15:51:05	events: Let arbitrary signals to simulate iOS/Android backgrounding events. This lets you build a custom embedded device that roughly offers the "this process is going to the background NOW" semantics of SDL on a mobile device.
911bf624	2019-03-15T14:08:30	events: Make debug logging of the event queue a hint instead of an #ifdef. This makes it easy to toggle it on when debugging a new platform (or just getting more visibility into an app) without having to rebuild SDL.
cbe80d47	2019-03-13T14:54:51	KMSDRM: valid file descriptors could positive or 0. -1 is invalid. (Bug 4530)
063c0c2a	2019-03-13T09:39:30	Android: check SDL is initialized before sending the event Avoid error message: SDLActivity thread ends (error=Video subsystem has not been initialized)
c5286156	2019-03-12T20:27:54	hidapi: Add support for Wii U/Switch USB GameCube controller adapter. Note that a single USB device is responsible for all 4 joysticks, so a large rewrite of the DeviceDriver functions was necessary to allow a single device to produce multiple joysticks.
82758efc	2019-03-12T14:45:04	[iOS DAC] Fix touch events getting from SDL2 to source2.
d05eec72	2019-03-12T14:44:25	Fixed initial display orientation at Android app start
1a8e3a02	2019-03-12T14:44:12	HIDAPI: fix bug that caused non-HID class parts of composite devices to have windows HID functions called on them.
cddb285c	2019-03-12T20:04:08	Fixed bug 4513 - Wayland, fix crash when remove event is sent (from Sebastian Krzyszkowiak)
052b4f29	2019-03-12T14:20:37	SDL_EVDEV_kbd_init: uninitialized data for ioctl (Bug 4530) Only two chars are used but the full prototype is: int tioclinux(struct tty_struct *tty, unsigned long arg) ==5010== Syscall param ioctl(TIOCLINUX) points to uninitialised byte(s) ==5010== at 0x53E73C7: ioctl (syscall-template.S:78) ==5010== by 0x4A887DA: SDL_EVDEV_Init (SDL_evdev.c:163) ==5010== by 0x4A7D157: KMSDRM_VideoInit (SDL_kmsdrmvideo.c:509) ==5010== by 0x497D959: SDL_VideoInit_REAL (SDL_video.c:529) ==5010== by 0x487ACBC: SDL_InitSubSystem_REAL (SDL.c:171) ==5010== by 0x487B052: SDL_Init_REAL (SDL.c:256) ==5010== by 0x488F7D6: SDL_Init (SDL_dynapi_procs.h:85)
b28e956b	2019-03-12T07:59:53	Fixed bug 4542 - Image flipped vertically when rendering on texture Have to recompute viewport because projection/glOrtho is different wether rendering is on target texture or not
28f54ee4	2019-03-11T15:31:46	SDL_MouseQuit(): clear mouse->cur_cursor (Bug 4530)
7b275942	2019-03-11T15:27:42	KMSDRM: missing return value in VideoInit() (Bug 4530)
3b49ee52	2019-03-11T15:22:40	KMSDRM: change calls free() to SDL_free() (Bug 4529)
2fd4aee1	2019-02-23T09:36:56	Un-activate some routine on mips because they are slowers (Bug 4503)
47fb781b	2019-02-22T09:30:45	BlitNtoN BlitNtoNKey: remove non-aligned word read/store (bpp 3<->4) (Bug 4503) Mips and (old) ARM doesn't allow word read/write when adress isn't 4bytes aligned. So just remove that.
6fbe9e23	2019-02-19T23:46:54	raspberry: expose second display. This lets apps see and choose between both an HDMI and DSI-connected display, such as a television and the Pi Foundation's official touchscreen. It only exposes the second display if the hardware reports that it is connected.
90a075d7	2019-02-18T22:48:14	Fix windows build
e9a7b697	2019-02-18T22:06:53	Fix bug 4053: Blit issues on Big Endian CPU
ea4c4cfc	2019-02-18T07:50:33	Fixed bug 4500 - Heap-Buffer Overflow in Map1toN pertaining to SDL_pixels.c Petr Pisar The reproducer has these data in BITMAPINFOHEADER: biSize = 40 biBitCount = 8 biClrUsed = 131075 SDL_LoadBMP_RW() function passes biBitCount as a color depth to SDL_CreateRGBSurface(), thus 256-color pallete is allocated. But then biClrUsed colors are read from a file and stored into the palette. SDL_LoadBMP_RW should report an error if biClrUsed is greater than 2^biBitCount.
afd1b3da	2019-02-17T16:20:23	Fix invalid memory access and optimise Blit_3or4_to_3or4__* Fix invalid write at last pixel of the surface: when surface has no padding (pitch == w * bpp) and bpp is 3 with Blit, no colorkey, and NO_ALPHA same or inverse rgb triplet Optimise by using int32 access: BGR24 -> ARGB8888 : faster x1.897875 (362405 -> 190953) RGB24 -> ABGR8888 : faster x1.660416 (363304 -> 218803) ABGR8888 -> RGB24 : faster x1.686319 (334962 -> 198635) ARGB8888 -> BGR24 : faster x1.691868 (324524 -> 191814) BGR24 -> RGB888 : faster x1.678459 (326811 -> 194709) BGR888 -> RGB24 : faster x1.731772 (327724 -> 189242) RGB24 -> BGR888 : faster x1.690989 (328916 -> 194511) RGB888 -> BGR24 : faster x1.698333 (326175 -> 192056)
b6a45f1a	2019-02-14T20:46:58	Fixed DualShock 3 mapping
1aa2ad2f	2019-02-09T17:40:32	Better naming for the blit permutation variables
f6a2ae60	2019-02-09T17:20:53	Faster blit colorkey or not, applied to bpp: 3->4 and 4->3 ===== BlitNtoNKey ======== ABGR8888 -> BGR24 : faster x3 (2168709 -> 562738) ABGR8888 -> RGB24 : faster x3 (2165055 -> 567458) ARGB8888 -> BGR24 : faster x3 (2169109 -> 564338) ARGB8888 -> RGB24 : faster x3 (2165266 -> 567081) BGR24 -> ABGR8888 : faster x3 (2997675 -> 891636) BGR24 -> ARGB8888 : faster x3 (2985449 -> 892028) BGR24 -> BGR888 : faster x3 (2961611 -> 891913) BGR24 -> BGRA8888 : faster x3 (3116305 -> 891534) BGR24 -> BGRX8888 : faster x3 (3179654 -> 896978) BGR24 -> RGB888 : faster x3 (2968191 -> 895112) BGR24 -> RGBA8888 : faster x3 (2998428 -> 893147) BGR24 -> RGBX8888 : faster x3 (2976529 -> 914853) BGR888 -> BGR24 : faster x3 (2161906 -> 563921) BGR888 -> RGB24 : faster x3 (2168228 -> 566634) BGRA8888 -> BGR24 : faster x4 (2270501 -> 561873) BGRA8888 -> RGB24 : faster x3 (2163179 -> 567330) BGRX8888 -> BGR24 : faster x3 (2162911 -> 562322) BGRX8888 -> RGB24 : faster x3 (2169617 -> 570927) RGB24 -> ABGR8888 : faster x3 (2977061 -> 925975) RGB24 -> ARGB8888 : faster x3 (2978148 -> 923680) RGB24 -> BGR888 : faster x3 (3001413 -> 935074) RGB24 -> BGRA8888 : faster x3 (2959003 -> 924096) RGB24 -> BGRX8888 : faster x3 (2965240 -> 927100) RGB24 -> RGB888 : faster x3 (2983921 -> 926063) RGB24 -> RGBA8888 : faster x3 (2963908 -> 925457) RGB24 -> RGBX8888 : faster x3 (2967957 -> 931700) RGB888 -> BGR24 : faster x3 (2173299 -> 563226) RGB888 -> RGB24 : faster x3 (2218374 -> 566164) RGBA8888 -> BGR24 : faster x3 (2166355 -> 561381) RGBA8888 -> RGB24 : faster x3 (2170322 -> 566729) RGBX8888 -> BGR24 : faster x3 (2168524 -> 564072) RGBX8888 -> RGB24 : faster x3 (2163680 -> 566956) ===== BlitNtoN ======== BGR24 -> BGRA8888 : faster x3 (2458958 -> 797557) BGR24 -> BGRX8888 : faster x3 (2486085 -> 797745) BGR24 -> RGBA8888 : faster x3 (2422116 -> 797637) BGR24 -> RGBX8888 : faster x3 (2454426 -> 799085) BGRA8888 -> BGR24 : faster x4 (2468206 -> 524486) BGRA8888 -> RGB24 : faster x4 (2463581 -> 525561) BGRX8888 -> BGR24 : faster x4 (2583355 -> 524468) BGRX8888 -> RGB24 : faster x4 (2477242 -> 524284) RGB24 -> BGRA8888 : faster x2 (2453414 -> 818415) RGB24 -> BGRX8888 : faster x3 (2414915 -> 800863) RGB24 -> RGBA8888 : faster x3 (2461114 -> 798148) RGB24 -> RGBX8888 : faster x3 (2400922 -> 799203) RGBA8888 -> BGR24 : faster x4 (2494472 -> 526428) RGBA8888 -> RGB24 : faster x4 (2462260 -> 526791) RGBX8888 -> BGR24 : faster x4 (2541115 -> 524390) RGBX8888 -> RGB24 : faster x4 (2469059 -> 525416)
604b44f2	2019-02-08T17:15:30	Fix wrong access and simplify
5ed30f84	2019-02-07T22:45:50	Some simplification of previous commit
5fd22892	2019-02-07T22:03:30	Faster blit with CopyAlpha, no ColorKey Applied to following formats: ABGR8888 -> BGRA8888 : faster x3 (2727179 -> 704761) ABGR8888 -> RGBA8888 : faster x3 (2707808 -> 705309) ARGB8888 -> BGRA8888 : faster x3 (2745371 -> 712437) ARGB8888 -> RGBA8888 : faster x3 (2746230 -> 705236) BGRA8888 -> ABGR8888 : faster x3 (2745026 -> 707045) BGRA8888 -> ARGB8888 : faster x3 (2752760 -> 727373) BGRA8888 -> RGBA8888 : faster x3 (2769544 -> 704607) RGBA8888 -> ABGR8888 : faster x3 (2725058 -> 706669) RGBA8888 -> ARGB8888 : faster x3 (2704866 -> 707132) RGBA8888 -> BGRA8888 : faster x3 (2710351 -> 704615)
704e62bb	2019-02-07T21:49:24	Code factorization of the pixel format permutation
0a007a9b	2019-02-07T18:52:49	Fix wrong comment
e5192384	2019-02-07T18:51:14	Faster blit with no ColorKey Applied to following formats: ABGR8888 -> BGRX8888 : faster x5 (3177493 -> 630439) ABGR8888 -> RGBX8888 : faster x5 (3178104 -> 628925) ARGB8888 -> BGRX8888 : faster x4 (3141089 -> 629448) ARGB8888 -> RGBX8888 : faster x5 (3216413 -> 630465) BGR888 -> BGRA8888 : faster x4 (3145403 -> 637701) BGR888 -> BGRX8888 : faster x4 (3142106 -> 630144) BGR888 -> RGBA8888 : faster x4 (3202685 -> 649384) BGR888 -> RGBX8888 : faster x4 (3170617 -> 658670) BGRA8888 -> BGR888 : faster x4 (3203308 -> 657697) BGRA8888 -> RGB888 : faster x5 (3201475 -> 631747) BGRA8888 -> RGBX8888 : faster x5 (3274544 -> 630409) BGRX8888 -> ABGR8888 : faster x4 (3149753 -> 638682) BGRX8888 -> ARGB8888 : faster x5 (3164101 -> 631273) BGRX8888 -> BGR888 : faster x4 (3144454 -> 630712) BGRX8888 -> RGB888 : faster x4 (3160490 -> 638047) BGRX8888 -> RGBA8888 : faster x5 (3308988 -> 631232) BGRX8888 -> RGBX8888 : faster x5 (3216775 -> 638065) RGB888 -> BGRA8888 : faster x4 (3143135 -> 655146) RGB888 -> BGRX8888 : faster x4 (3141790 -> 653771) RGB888 -> RGBA8888 : faster x5 (3214402 -> 637001) RGB888 -> RGBX8888 : faster x4 (3143082 -> 630009) RGBA8888 -> BGR888 : faster x3 (3157048 -> 920375) RGBA8888 -> BGRX8888 : faster x5 (3196692 -> 632996) RGBA8888 -> RGB888 : faster x4 (3141570 -> 652151) RGBX8888 -> ABGR8888 : faster x5 (3175401 -> 631218) RGBX8888 -> ARGB8888 : faster x4 (3144690 -> 639440) RGBX8888 -> BGR888 : faster x4 (3144250 -> 630171) RGBX8888 -> BGRA8888 : faster x5 (3220321 -> 630731) RGBX8888 -> BGRX8888 : faster x4 (3178453 -> 637445) RGBX8888 -> RGB888 : faster x5 (3203623 -> 632596)
7372295e	2019-02-07T17:52:28	Faster blit when using No Alpha or Set Alpha, + ColorKey Applied to following formats: ABGR8888 -> BGRX8888 : faster x4 (2794295 -> 610587) ABGR8888 -> RGB888 : faster x4 (2835693 -> 615561) ABGR8888 -> RGBX8888 : faster x4 (2880475 -> 610479) ARGB8888 -> BGR888 : faster x4 (2802718 -> 610702) ARGB8888 -> BGRX8888 : faster x4 (2792481 -> 606311) ARGB8888 -> RGBX8888 : faster x4 (2821621 -> 624745) BGR888 -> ARGB8888 : faster x4 (2791705 -> 637889) BGR888 -> BGRA8888 : faster x4 (2793195 -> 652299) BGR888 -> BGRX8888 : faster x4 (2800713 -> 609326) BGR888 -> RGB888 : faster x4 (2812260 -> 610471) BGR888 -> RGBA8888 : faster x4 (2792327 -> 629288) BGR888 -> RGBX8888 : faster x4 (2799224 -> 607073) BGRA8888 -> BGR888 : faster x4 (2800520 -> 606897) BGRA8888 -> RGB888 : faster x4 (2825274 -> 616156) BGRA8888 -> RGBX8888 : faster x4 (2812530 -> 610340) BGRX8888 -> ABGR8888 : faster x4 (2793940 -> 628596) BGRX8888 -> ARGB8888 : faster x4 (2822686 -> 638899) BGRX8888 -> BGR888 : faster x4 (2818141 -> 613659) BGRX8888 -> RGB888 : faster x4 (2929017 -> 611794) BGRX8888 -> RGBA8888 : faster x4 (2799709 -> 629750) BGRX8888 -> RGBX8888 : faster x4 (2911010 -> 605640) RGB888 -> ABGR8888 : faster x4 (2800671 -> 631542) RGB888 -> BGR888 : faster x4 (2802644 -> 604461) RGB888 -> BGRA8888 : faster x4 (2801919 -> 628729) RGB888 -> BGRX8888 : faster x4 (2938244 -> 604135) RGB888 -> RGBA8888 : faster x4 (2912447 -> 642185) RGB888 -> RGBX8888 : faster x4 (2831676 -> 634293) RGBA8888 -> BGR888 : faster x4 (2928896 -> 614960) RGBA8888 -> BGRX8888 : faster x4 (2821422 -> 608146) RGBA8888 -> RGB888 : faster x4 (2825927 -> 617184) RGBX8888 -> ABGR8888 : faster x4 (2803852 -> 654129) RGBX8888 -> ARGB8888 : faster x4 (2923615 -> 642644) RGBX8888 -> BGR888 : faster x4 (2806523 -> 610447) RGBX8888 -> BGRA8888 : faster x4 (2813388 -> 630305) RGBX8888 -> BGRX8888 : faster x4 (2800052 -> 607881) RGBX8888 -> RGB888 : faster x4 (2807722 -> 610263)
bb9a9080	2019-02-07T16:13:25	Fix pointer warnings

5f341620

2019-05-19T12:06:58

Fixed bug 4474 - Add support for an ASUS Gamepad variation Trent Gamblin This patch adds a variation of the ASUS Gamepad to the game controller DB. All the values are the same except the GUID.

41c718db

2019-05-19T12:04:06

Fixed bug 4469 - make SDL_CreateTextureFromSurface pick a more appropriate format Sylvain Currently SDL_CreateTextureFromSurface picks first valid format, and do a conversion. format = renderer->info.texture_formats[0]; for (i = 0; i < renderer->info.num_texture_formats; ++i) { if (!SDL_ISPIXELFORMAT_FOURCC(renderer->info.texture_formats[i]) && SDL_ISPIXELFORMAT_ALPHA(renderer->info.texture_formats[i]) == needAlpha) { format = renderer->info.texture_formats[i]; break; It could try to find a better format, for instance : if SDL_Surface has no Amask, but a colorkey : if surface fmt is RGB888, try to pick ARGB8888 renderer fmt if surface fmt is BGR888, try to pick ABGR8888 renderer fmt else try to pick the same renderer format as surface fmt if no format has been picked, use the fallback. I think it goes with bug 4290 fastpath BlitNtoN when you expand a surface with pixel format of size 24 to 32, there is a fast path possible. So with this issue: - if you have a surface with colorkey (RGB or BGR, not palette), it takes a renderer format where the conversion is faster. (it avoids, if possible, RGB -> ABGR which means switching RGB to BGR) - if you have a surface ABGR format, it try to take the ABGR from the renderer. (it avoids, if possible, ABGR -> ARGB, which means switch RGB to BGR)

c377de54

2019-05-19T11:56:26

Fixed bug 4436 - [OpenBSD] fix D-pad Thomas Frohwein Hi, If a gamepad lists the Dpad as 4 buttons (Dpad Up,Down, Left, Right) like with the Xbox 360 gamepad / XInput report descriptor used by OpenBSD (https://github.com/openbsd/src/blob/master/sys/dev/usb/uhid_rdesc.h#L184), this is not recognized by the SDL BSD backend and no hat or any other listing for the D-pad exists, e.g. in sdl2-jstest (https://gitlab.com/sdl-jstest/sdl-jstest). The attached diff fixes this and makes the D-pad on my Xbox 360 and Logitech F310 controllers usable. It adds a hat to nhats when usage HUG_DPAD_UP is found, reads the state of the D-pad buttons into array dpad[], and turns the value of dpad[] into an SDL hat direction (dpad_to_sdl()). Tested and works with Xbox 360 controller and Logitech F310 in XInput mode. Software-side tested with sdl2-jstest and Owlboy where this worked without problems or regressions. I don't know if this would be applicable to other *BSDs and don't have an install to test it with, therefore wrapped it in __OpenBSD__ ifdefs. Thanks, thfr

ee0a482a

2019-05-19T11:52:25

Fixed bug 4401 - SDL_GetWindowPosition() wrong after SDL_SetWindowPosition() until window is moved on macOS Removed incorrect call to SDL_SendWindowEvent(window, SDL_WINDOWEVENT_MOVED, x, y); If the position of the window isn't adjusted in the SetWindowPosition() call, then sending the window event would have no effect because x and y equals the window x and y. If the position of the window is adjusted in the SetWindowPosition() call, then we don't want to clobber it with values that the user passed in.

2ee9b1dd

2019-05-19T11:01:36

Fixed bug 4025 - SDL_Renderer OpenGL : add support for textures ABGR, RGB, BGR Sylvain OpenGLES2 SDL renderer has support for textures ARGB, ABGR, RGB and BGR, whereas OpenGL SDL renderer only had ARGB. If you think it's worth adding it, here's a patch. I quickly tried and it worked, but there may be missing things or corner case.

8dea23c7

2019-05-19T10:44:14

Fixed bug 3911 - SYSWM generic X11 events missing event data Andrei Drexler For X11 GenericEvents, the associated data is only available between a call to XGetEventData and the matching XFreeEventData, i.e. in X11_HandleGenericEvent. Trying to call XGetEventData a second time on the same event will fail, so an application that wants to inspect XInput2 events (e.g. for stylus pressure) has no way of retrieving its data from queued SYSWM events. The attached patch (based on SDL-2.0.7-11629) sends SYSWM messages from X11_HandleGenericEvent while the data is still available, allowing client code to register an event filter/watcher and process the event inside the callback.

29f34453

2019-05-19T10:36:44

video: Add Vulkan support for vivante fb Vivante drivers use the VK_KHR_display extension for rendering directly to the frame buffer. This patch adds support to the video driver for Vulkan rendering using that method. - Add an utility function SDL_Vulkan_Display_CreateSurface that creates a surface using this extension. The display to use (if there are multiple) can be overridden using the environment variable "SDL_VULKAN_DISPLAY". - Use this function in a new compilation unit SDL_vivantevideo.c, which implements the SDL_VIDEO_VULKAN methods of the driver structure.

00e5eeb4

2019-05-19T01:45:15

test: added SDLTest_CommonDefaultArgs() This is for test apps that don't need custom command line arguments; it lets us reduce the boilerplate code a tiny bit.

62a57970

2019-05-15T14:01:15

Windows are not in a minimized state when they are shown This fixes https://github.com/ValveSoftware/steam-for-linux/issues/4313 "Exiting game a in Steam Big Picture Mode gets semi-windowed BPM"

abcfe804

2019-05-14T14:20:54

[SDL] iOS fix bug with audio interrupted by a phone call not restoring.

59da5b72

2019-05-14T07:55:42

[SDL] ios Touch Fix.

ba0fc92d

2019-05-11T12:41:21

Patched to compile.

6eb05211

2019-05-09T12:09:45

Emscripten: Use EMSCRIPTEN_EVENT_TARGET_*

4e5b5cba

2019-05-09T12:09:40

Emscripten: Switch from canvas[XY] to target[XY] Allows mouse/touch events to work on non-default canvases

60c48ed7

2019-05-09T12:09:34

Emscripten: Store canvas id in WindowData Also replace all hardcoded uses of "#canvas" or NULL

f0a4fea8

2019-04-25T14:17:07

Fixed bug 4608 - Android: not getting SDL_WINDOWEVENT_FOCUS_GAINED on start of our app Dan Ginsburg I've seen this on several devices including Moto Z running Android 7 and a Snapdragon 845 running Android 9. What happens is as follows: SDLActivity.onWindowFocusChanged(true) happens pretty early on, but it's before we've done SDL_CreateWindow and so Android_Window is 0x0 thus this message does not get sent: JNIEXPORT void JNICALL SDL_JAVA_INTERFACE(nativeFocusChanged)( JNIEnv *env, jclass cls, jboolean hasFocus) { SDL_LockMutex(Android_ActivityMutex); if (Android_Window) { __android_log_print(ANDROID_LOG_VERBOSE, "SDL", "nativeFocusChanged()"); SDL_SendWindowEvent(Android_Window, (hasFocus ? SDL_WINDOWEVENT_FOCUS_GAINED : SDL_WINDOWEVENT_FOCUS_LOST), 0, 0); } SDL_UnlockMutex(Android_ActivityMutex); } When the window does get created, in Android_CreateWindow it does this: window->flags &= ~SDL_WINDOW_RESIZABLE; /* window is NEVER resizeable */ window->flags &= ~SDL_WINDOW_HIDDEN; window->flags |= SDL_WINDOW_SHOWN; /* only one window on Android */ window->flags |= SDL_WINDOW_INPUT_FOCUS; /* always has input focus */ /* One window, it always has focus */ SDL_SetMouseFocus(window); SDL_SetKeyboardFocus(window); The SDL_SetKeyboardFocus does send an SDL_WINDOWEVENT_FOCUS_GAINED message, but it gets eaten in SDL_SendWindowEvent because we've forced SDL_WINDOW_INPUT_FOCUS beforehand: case SDL_WINDOWEVENT_FOCUS_GAINED: if (window->flags & SDL_WINDOW_INPUT_FOCUS) { return 0; } window->flags |= SDL_WINDOW_INPUT_FOCUS; SDL_OnWindowFocusGained(window); break; I can fix the problem if I comment out this line from Android_CreateWindow: window->flags |= SDL_WINDOW_INPUT_FOCUS; /* always has input focus */ I would propose that as a fix unless there is a reason not to.

f79190f4

2019-04-23T07:59:31

Use _Exit() when available

2c92c8e8

2019-04-23T14:24:58

Android: add static variable initialization in non blocking event loop

cb18117c

2019-04-22T16:34:42

Added a helper function to tell whether or not a window can be minimized

f1b57f37

2019-04-22T16:25:49

Only leave fullscreen mode if we're actually going to minimize

9950271b

2019-04-22T16:19:52

Fixed bug 4580 - Android 8: immersive fullscreen notification causes flickering between fullscreen and non-fullscreen and app is unresponsive Sylvain 2019-04-18 21:22:59 UTC Changes: - SDL_WINDOWEVENT_FOCUS_GAINED and SDL_WINDOWEVENT_FOCUS_LOST are sent when the java method onWindowFocusChanged() is called. - If we have support for MultiWindow (eg API >= 24), SDL event loop is blocked/un-blocked (or simply egl-backed-up or not), when java onStart()/onStop() are called. - If not, this behaves like now, SDL event loop is blocked/un-blocked when onPause()/onResume() are called. So if we have two app on screen and switch from one to the other, only FOCUS events are sent (and onPause()/onResume() are called but empty. onStart()/onStop() are not called). The SDL app, un-focused, would still continue to run and display frames (currently the App would be displayed, but paused). Like a video player app or a chronometer that would still be refreshed, even if the window hasn't the focus. It should work also on ChromeBooks (not tested), with two apps opened at the same time. I am not sure this fix Dan's issue. Because focus lost event triggers Minimize function (which BTW is not provided on android). https://hg.libsdl.org/SDL/file/bb41b3635c34/src/video/SDL_video.c#l2653 https://hg.libsdl.org/SDL/file/bb41b3635c34/src/video/SDL_video.c#l2634 So, in addition, it would need to add by default SDL_HINT_VIDEO_MINIMIZE_ON_FOCUS_LOSS to 0. So that the lost focus event doesn't try to minimize the window. And this should fix also the issue.

90b08881

2019-04-17T20:41:05

iOS: Remove code trying to support compilation on the iOS 7 SDK, the deployment target has been set to iOS 8 for years and there's other unconditionally compiled code that depends on newer SDKs so that code is useless.

9d7b2615

2019-04-17T20:14:40

macOS: Fix compilation when using the 10.9 SDK or older.

bd344c22

2019-04-12T23:15:26

Android: when event loop is not blocking in pause, backup EGL context (Bug 4578) Backup the EGL context when SDL_APP_DIDENTERBACKGROUND has been removed from the event queue.

00c824a8

2019-04-10T22:30:58

Fix disabling OpenGL vsync on macOS 10.14.4+ (bug #4575).

aae49015

2019-04-10T10:59:53

Fixed bug 4581 - generate synthetic mouse events at window boundaries when real touch events are actually outside the window.

cfefe543

2019-04-08T21:27:24

Fixed bug 4581 - mouse events with SDL_TOUCH_MOUSEID make window lost focus Virtual mouse events should never leave the window or change focus for single window applications.

d68e501d

2019-04-08T13:43:48

Fixed bug 4582 - Maximize/Resize not working on Windows 10 When viewport is set, projectionAndView changes, but ID3D11DeviceContext_UpdateSubresource was not called.

eb7affee

2019-04-06T21:52:51

SDL_HINT_MOUSE_TOUCH_EVENTS: move tracking appart in case of 'window' is null

a1a9fd50

2019-04-06T21:43:16

Bug 4581: move tracking appart so it doesn't require the window to have focus

a46af76b

2019-04-05T08:15:01

Fixed bug 4579 - SDL_android.c s_active not being atomic Isaias Brunet This bug cause a false assert due to multiple threads modifying the same variable without any atomic operation.

9eac91dd

2019-04-05T08:10:12

Set SDL_HINT_MOUSE_TOUCH_EVENTS for iPhone and iPad as well

b6f33a68

2019-04-05T07:51:11

https://bugzilla.libsdl.org/show_bug.cgi?id=4577 SDL_GetWindowDisplayMode was returning an incorrect result on iPhone Plus devices (tested on iOS 12.1/12.2). The problem was that the value returned by UIScreenMode was assumed to be the physical pixels on the display, rather than the scaled retina pixels. The fix is to use the scale returned by UIScreen.scale rather than the nativeScale.

05333a6e

2019-04-05T09:16:30

Android: add hint SDL_HINT_ANDROID_BLOCK_ON_PAUSE to set whether the event loop will block itself when the app is paused.

b470cd9b

2019-04-05T08:36:31

Android: default SDL_HINT_MOUSE_TOUCH_EVENTS to 1 as previous behaviour

bfdd0b22

2019-04-04T17:01:02

Android: remove SDL_HINT_ANDROID_SEPARATE_MOUSE_AND_TOUCH java layer runs as if separate mouse and touch was 1, Use SDL_HINT_MOUSE_TOUCH_EVENTS and SDL_HINT_TOUCH_MOUSE_EVENTS for generating synthetic touch/mouse events

e4157618

2019-04-04T16:51:50

Add hint SDL_HINT_MOUSE_TOUCH_EVENTS for mouse events to generate touch events controlling whether mouse events should generate synthetic touch events By default SDL will *not* generate touch events for mouse events

ab03892d

2019-04-04T15:19:00

Bug 4576: track both FingerId and TrackId

e39c0a1f

2019-04-03T10:14:42

Bug 4576: fix wrong scaling

236b8606

2019-04-02T18:07:27

Bug 4576: one more warning

b45abbb2

2019-04-02T17:57:27

Bug 4576: fix warning and compile

9b3c2258

2019-04-02T17:23:55

Bug 4576: remove touch/mouse duplication for Android

9d28156f

2019-04-02T17:18:47

Bug 4576: remove touch/mouse duplication for IOS

42de5f97

2019-04-02T17:13:22

Bug 4576: remove touch/mouse duplication for WinRT

b086edc9

2019-04-02T17:10:29

Bug 4576: remove touch/mouse duplication for Emscripten

b8e5c561

2019-04-02T17:07:54

Bug 4576: remove touch/mouse duplication for Wayland

6bc2d9de

2019-04-02T17:03:58

Bug 4576: remove touch/mouse duplication for linux/EVDEV

1a4c3b57

2019-04-02T16:58:11

Bug 4576: remove touch/mouse duplication for Windows

a3f2c446

2019-04-02T16:46:17

Bug 4576: handle mapping of TouchEvents to MouseEvents at higher level

9a8d5215

2019-03-27T08:17:05

Handle potentially calling SDL_JoystickUpdate() and SDL_JoystickQuit() at the same time.

2fbfe8b9

2019-03-25T12:59:30

coreaudio: Set audio callback thread priority. Fixes Bugzilla #4155.

6a3356ab

2019-03-25T12:24:38

Backed out changeset cec31de4e126 This was meant to migrate CoreAudio onto the same SDL_RunAudio() path that most other audio drivers are on, but it introduced a bug because it doesn't deal with dropped audio buffers...and fixing that properly just introduces latency. I might revisit this later, perhaps by reworking SDL_RunAudio to allow for this sort of API better, or redesigning the whole subsystem or something, I don't know. I'm not super-thrilled that this has to exist outside of the usual codepaths, though. Fixes Bugzilla #4481.

8ab698af

2019-03-21T10:39:49

opengles2: Fix static analysis warning. Not clear if this could ever dereference NULL in real life, but better safe than sorry!

01c924fa

2019-03-19T17:20:54

Hopefully fixed the mingw32 build

deb7d08c

2019-03-19T17:05:22

Fixed Visual Studio build

ac23d78f

2019-03-19T16:53:55

Didn't need to add SDL_windows.h include, that was already included

b2e76d86

2019-03-19T16:52:09

Fixed Windows RT build

de82759c

2019-03-19T07:53:33

Added support for building SDL as a dynamic library on iOS

f07c992b

2019-03-17T12:36:40

hidapi: Add GCN L/R buttons, just in case someone wants them...

6311c7cf

2019-03-16T19:08:59

emscripten: force resize event when pixel ratio changes Without this, applications can't react to changed canvas size on window zoom.

b8bd0aa0

2019-03-16T19:07:34

Fixed bug 4450 - SDL_mouse.c fails to compile with CMake generated Visual Studio files if SDL_VIDEO_VULKAN 0/undefined Max Waine SDL_mouse.c, if compiled for Windows, requires GetDoubleClickTime to compile (available from winuser.h). Without Vulkan present this fails to compile as the include chain for winuser.h is the following. SDL_mouse.c -> SDL_sysvideo.h -> SDL_vulkan_internal.h -> SDL_windows.h -> windows.h -> winuser.h. Problem is that SDL_vulkan_internal.h doesn't include SDL_windows.h if Vulkan isn't present, so under MinGW/GCC it will give a -Wimplicit-function-declaration warning for GetDoubleClickTime, and under MSVC fails to compile completely. The solution to this would be to simplify the include chain: including SDL_windows.h under the same condition as GetDoubleClickTime (#ifdef __WIN32__) in SDL_mouse.c (or another file that isn't quite so indirectly included).

faf97978

2019-03-16T19:03:13

Fixed bug 4511 - SDL_gamecontrollerdb Mapping for Sony Playstation USB controller Renaud Lepage Simply submitting a new mapping.

35255342

2019-03-16T18:48:21

Fixed bug 4525 - Fix crash in ALSA_HotplugThread caused by bad return value check Anthony Pesch Fix snd_device_name_hint return value check According to the ALSA documentation, snd_device_name_hint returns 0 on success, otherwise a negative error code. The code previously only considered -1 to be an error, which let other error codes through resulting in a segfault when hints (which was NULL) was dereferenced

8bc59f87

2019-03-16T18:34:33

Fixed CVE-2019-7635 and bug 4498 - Heap-Buffer Overflow in Blit1to4 pertaining to SDL_blit_1.c Petr Pisar The root cause is that the POC BMP file declares 3 colors used and 4 bpp palette, but pixel at line 28 and column 1 (counted from 0) has color number 3. Then when the image loaded into a surface is passed to SDL_DisplayFormat(), in order to convert it to a video format, a used bliting function looks up a color number 3 in a 3-element long color bliting map. (The map obviously has the same number entries as the surface format has colors.) Proper fix should refuse broken BMP images that have a pixel with a color index higher than declared number of "used" colors. Possibly more advanced fix could try to relocate the out-of-range color index into a vacant index (if such exists).

0f148eb6

2019-03-16T18:12:26

Fix polling left trigger reporting right trigger's values.

58ca76be

2019-03-16T18:11:09

Fix DirectInput error codes being lost

12c5cda6

2019-03-16T00:08:19

Fix compiler warnings.

f95ca7bb

2019-03-15T16:13:19

events: Disable all the signal-handling code on platforms without support. So on Windows, for example, this mostly becomes a few empty functions.

8a5a05c1

2019-03-15T15:51:05

events: Let arbitrary signals to simulate iOS/Android backgrounding events. This lets you build a custom embedded device that roughly offers the "this process is going to the background NOW" semantics of SDL on a mobile device.

911bf624

2019-03-15T14:08:30

events: Make debug logging of the event queue a hint instead of an #ifdef. This makes it easy to toggle it on when debugging a new platform (or just getting more visibility into an app) without having to rebuild SDL.

cbe80d47

2019-03-13T14:54:51

KMSDRM: valid file descriptors could positive or 0. -1 is invalid. (Bug 4530)

063c0c2a

2019-03-13T09:39:30

Android: check SDL is initialized before sending the event Avoid error message: SDLActivity thread ends (error=Video subsystem has not been initialized)

c5286156

2019-03-12T20:27:54

hidapi: Add support for Wii U/Switch USB GameCube controller adapter. Note that a single USB device is responsible for all 4 joysticks, so a large rewrite of the DeviceDriver functions was necessary to allow a single device to produce multiple joysticks.

82758efc

2019-03-12T14:45:04

[iOS DAC] Fix touch events getting from SDL2 to source2.

d05eec72

2019-03-12T14:44:25

Fixed initial display orientation at Android app start

1a8e3a02

2019-03-12T14:44:12

HIDAPI: fix bug that caused non-HID class parts of composite devices to have windows HID functions called on them.

cddb285c

2019-03-12T20:04:08

Fixed bug 4513 - Wayland, fix crash when remove event is sent (from Sebastian Krzyszkowiak)

052b4f29

2019-03-12T14:20:37

SDL_EVDEV_kbd_init: uninitialized data for ioctl (Bug 4530) Only two chars are used but the full prototype is: int tioclinux(struct tty_struct *tty, unsigned long arg) ==5010== Syscall param ioctl(TIOCLINUX) points to uninitialised byte(s) ==5010== at 0x53E73C7: ioctl (syscall-template.S:78) ==5010== by 0x4A887DA: SDL_EVDEV_Init (SDL_evdev.c:163) ==5010== by 0x4A7D157: KMSDRM_VideoInit (SDL_kmsdrmvideo.c:509) ==5010== by 0x497D959: SDL_VideoInit_REAL (SDL_video.c:529) ==5010== by 0x487ACBC: SDL_InitSubSystem_REAL (SDL.c:171) ==5010== by 0x487B052: SDL_Init_REAL (SDL.c:256) ==5010== by 0x488F7D6: SDL_Init (SDL_dynapi_procs.h:85)

b28e956b

2019-03-12T07:59:53

Fixed bug 4542 - Image flipped vertically when rendering on texture Have to recompute viewport because projection/glOrtho is different wether rendering is on target texture or not

28f54ee4

2019-03-11T15:31:46

SDL_MouseQuit(): clear mouse->cur_cursor (Bug 4530)

7b275942

2019-03-11T15:27:42

KMSDRM: missing return value in VideoInit() (Bug 4530)

3b49ee52

2019-03-11T15:22:40

KMSDRM: change calls free() to SDL_free() (Bug 4529)

2fd4aee1

2019-02-23T09:36:56

Un-activate some routine on mips because they are slowers (Bug 4503)

47fb781b

2019-02-22T09:30:45

BlitNtoN BlitNtoNKey: remove non-aligned word read/store (bpp 3<->4) (Bug 4503) Mips and (old) ARM doesn't allow word read/write when adress isn't 4bytes aligned. So just remove that.

6fbe9e23

2019-02-19T23:46:54

raspberry: expose second display. This lets apps see and choose between both an HDMI and DSI-connected display, such as a television and the Pi Foundation's official touchscreen. It only exposes the second display if the hardware reports that it is connected.

90a075d7

2019-02-18T22:48:14

Fix windows build

e9a7b697

2019-02-18T22:06:53

Fix bug 4053: Blit issues on Big Endian CPU

ea4c4cfc

2019-02-18T07:50:33

Fixed bug 4500 - Heap-Buffer Overflow in Map1toN pertaining to SDL_pixels.c Petr Pisar The reproducer has these data in BITMAPINFOHEADER: biSize = 40 biBitCount = 8 biClrUsed = 131075 SDL_LoadBMP_RW() function passes biBitCount as a color depth to SDL_CreateRGBSurface(), thus 256-color pallete is allocated. But then biClrUsed colors are read from a file and stored into the palette. SDL_LoadBMP_RW should report an error if biClrUsed is greater than 2^biBitCount.

afd1b3da

2019-02-17T16:20:23

Fix invalid memory access and optimise Blit_3or4_to_3or4__* Fix invalid write at last pixel of the surface: when surface has no padding (pitch == w * bpp) and bpp is 3 with Blit, no colorkey, and NO_ALPHA same or inverse rgb triplet Optimise by using int32 access: BGR24 -> ARGB8888 : faster x1.897875 (362405 -> 190953) RGB24 -> ABGR8888 : faster x1.660416 (363304 -> 218803) ABGR8888 -> RGB24 : faster x1.686319 (334962 -> 198635) ARGB8888 -> BGR24 : faster x1.691868 (324524 -> 191814) BGR24 -> RGB888 : faster x1.678459 (326811 -> 194709) BGR888 -> RGB24 : faster x1.731772 (327724 -> 189242) RGB24 -> BGR888 : faster x1.690989 (328916 -> 194511) RGB888 -> BGR24 : faster x1.698333 (326175 -> 192056)

b6a45f1a

2019-02-14T20:46:58

Fixed DualShock 3 mapping

1aa2ad2f

2019-02-09T17:40:32

Better naming for the blit permutation variables

f6a2ae60

2019-02-09T17:20:53

Faster blit colorkey or not, applied to bpp: 3->4 and 4->3 ===== BlitNtoNKey ======== ABGR8888 -> BGR24 : faster x3 (2168709 -> 562738) ABGR8888 -> RGB24 : faster x3 (2165055 -> 567458) ARGB8888 -> BGR24 : faster x3 (2169109 -> 564338) ARGB8888 -> RGB24 : faster x3 (2165266 -> 567081) BGR24 -> ABGR8888 : faster x3 (2997675 -> 891636) BGR24 -> ARGB8888 : faster x3 (2985449 -> 892028) BGR24 -> BGR888 : faster x3 (2961611 -> 891913) BGR24 -> BGRA8888 : faster x3 (3116305 -> 891534) BGR24 -> BGRX8888 : faster x3 (3179654 -> 896978) BGR24 -> RGB888 : faster x3 (2968191 -> 895112) BGR24 -> RGBA8888 : faster x3 (2998428 -> 893147) BGR24 -> RGBX8888 : faster x3 (2976529 -> 914853) BGR888 -> BGR24 : faster x3 (2161906 -> 563921) BGR888 -> RGB24 : faster x3 (2168228 -> 566634) BGRA8888 -> BGR24 : faster x4 (2270501 -> 561873) BGRA8888 -> RGB24 : faster x3 (2163179 -> 567330) BGRX8888 -> BGR24 : faster x3 (2162911 -> 562322) BGRX8888 -> RGB24 : faster x3 (2169617 -> 570927) RGB24 -> ABGR8888 : faster x3 (2977061 -> 925975) RGB24 -> ARGB8888 : faster x3 (2978148 -> 923680) RGB24 -> BGR888 : faster x3 (3001413 -> 935074) RGB24 -> BGRA8888 : faster x3 (2959003 -> 924096) RGB24 -> BGRX8888 : faster x3 (2965240 -> 927100) RGB24 -> RGB888 : faster x3 (2983921 -> 926063) RGB24 -> RGBA8888 : faster x3 (2963908 -> 925457) RGB24 -> RGBX8888 : faster x3 (2967957 -> 931700) RGB888 -> BGR24 : faster x3 (2173299 -> 563226) RGB888 -> RGB24 : faster x3 (2218374 -> 566164) RGBA8888 -> BGR24 : faster x3 (2166355 -> 561381) RGBA8888 -> RGB24 : faster x3 (2170322 -> 566729) RGBX8888 -> BGR24 : faster x3 (2168524 -> 564072) RGBX8888 -> RGB24 : faster x3 (2163680 -> 566956) ===== BlitNtoN ======== BGR24 -> BGRA8888 : faster x3 (2458958 -> 797557) BGR24 -> BGRX8888 : faster x3 (2486085 -> 797745) BGR24 -> RGBA8888 : faster x3 (2422116 -> 797637) BGR24 -> RGBX8888 : faster x3 (2454426 -> 799085) BGRA8888 -> BGR24 : faster x4 (2468206 -> 524486) BGRA8888 -> RGB24 : faster x4 (2463581 -> 525561) BGRX8888 -> BGR24 : faster x4 (2583355 -> 524468) BGRX8888 -> RGB24 : faster x4 (2477242 -> 524284) RGB24 -> BGRA8888 : faster x2 (2453414 -> 818415) RGB24 -> BGRX8888 : faster x3 (2414915 -> 800863) RGB24 -> RGBA8888 : faster x3 (2461114 -> 798148) RGB24 -> RGBX8888 : faster x3 (2400922 -> 799203) RGBA8888 -> BGR24 : faster x4 (2494472 -> 526428) RGBA8888 -> RGB24 : faster x4 (2462260 -> 526791) RGBX8888 -> BGR24 : faster x4 (2541115 -> 524390) RGBX8888 -> RGB24 : faster x4 (2469059 -> 525416)

604b44f2

2019-02-08T17:15:30

Fix wrong access and simplify

5ed30f84

2019-02-07T22:45:50

Some simplification of previous commit

5fd22892

2019-02-07T22:03:30

Faster blit with CopyAlpha, no ColorKey Applied to following formats: ABGR8888 -> BGRA8888 : faster x3 (2727179 -> 704761) ABGR8888 -> RGBA8888 : faster x3 (2707808 -> 705309) ARGB8888 -> BGRA8888 : faster x3 (2745371 -> 712437) ARGB8888 -> RGBA8888 : faster x3 (2746230 -> 705236) BGRA8888 -> ABGR8888 : faster x3 (2745026 -> 707045) BGRA8888 -> ARGB8888 : faster x3 (2752760 -> 727373) BGRA8888 -> RGBA8888 : faster x3 (2769544 -> 704607) RGBA8888 -> ABGR8888 : faster x3 (2725058 -> 706669) RGBA8888 -> ARGB8888 : faster x3 (2704866 -> 707132) RGBA8888 -> BGRA8888 : faster x3 (2710351 -> 704615)

704e62bb

2019-02-07T21:49:24

Code factorization of the pixel format permutation

0a007a9b

2019-02-07T18:52:49

Fix wrong comment

e5192384

2019-02-07T18:51:14

Faster blit with no ColorKey Applied to following formats: ABGR8888 -> BGRX8888 : faster x5 (3177493 -> 630439) ABGR8888 -> RGBX8888 : faster x5 (3178104 -> 628925) ARGB8888 -> BGRX8888 : faster x4 (3141089 -> 629448) ARGB8888 -> RGBX8888 : faster x5 (3216413 -> 630465) BGR888 -> BGRA8888 : faster x4 (3145403 -> 637701) BGR888 -> BGRX8888 : faster x4 (3142106 -> 630144) BGR888 -> RGBA8888 : faster x4 (3202685 -> 649384) BGR888 -> RGBX8888 : faster x4 (3170617 -> 658670) BGRA8888 -> BGR888 : faster x4 (3203308 -> 657697) BGRA8888 -> RGB888 : faster x5 (3201475 -> 631747) BGRA8888 -> RGBX8888 : faster x5 (3274544 -> 630409) BGRX8888 -> ABGR8888 : faster x4 (3149753 -> 638682) BGRX8888 -> ARGB8888 : faster x5 (3164101 -> 631273) BGRX8888 -> BGR888 : faster x4 (3144454 -> 630712) BGRX8888 -> RGB888 : faster x4 (3160490 -> 638047) BGRX8888 -> RGBA8888 : faster x5 (3308988 -> 631232) BGRX8888 -> RGBX8888 : faster x5 (3216775 -> 638065) RGB888 -> BGRA8888 : faster x4 (3143135 -> 655146) RGB888 -> BGRX8888 : faster x4 (3141790 -> 653771) RGB888 -> RGBA8888 : faster x5 (3214402 -> 637001) RGB888 -> RGBX8888 : faster x4 (3143082 -> 630009) RGBA8888 -> BGR888 : faster x3 (3157048 -> 920375) RGBA8888 -> BGRX8888 : faster x5 (3196692 -> 632996) RGBA8888 -> RGB888 : faster x4 (3141570 -> 652151) RGBX8888 -> ABGR8888 : faster x5 (3175401 -> 631218) RGBX8888 -> ARGB8888 : faster x4 (3144690 -> 639440) RGBX8888 -> BGR888 : faster x4 (3144250 -> 630171) RGBX8888 -> BGRA8888 : faster x5 (3220321 -> 630731) RGBX8888 -> BGRX8888 : faster x4 (3178453 -> 637445) RGBX8888 -> RGB888 : faster x5 (3203623 -> 632596)

7372295e

2019-02-07T17:52:28

Faster blit when using No Alpha or Set Alpha, + ColorKey Applied to following formats: ABGR8888 -> BGRX8888 : faster x4 (2794295 -> 610587) ABGR8888 -> RGB888 : faster x4 (2835693 -> 615561) ABGR8888 -> RGBX8888 : faster x4 (2880475 -> 610479) ARGB8888 -> BGR888 : faster x4 (2802718 -> 610702) ARGB8888 -> BGRX8888 : faster x4 (2792481 -> 606311) ARGB8888 -> RGBX8888 : faster x4 (2821621 -> 624745) BGR888 -> ARGB8888 : faster x4 (2791705 -> 637889) BGR888 -> BGRA8888 : faster x4 (2793195 -> 652299) BGR888 -> BGRX8888 : faster x4 (2800713 -> 609326) BGR888 -> RGB888 : faster x4 (2812260 -> 610471) BGR888 -> RGBA8888 : faster x4 (2792327 -> 629288) BGR888 -> RGBX8888 : faster x4 (2799224 -> 607073) BGRA8888 -> BGR888 : faster x4 (2800520 -> 606897) BGRA8888 -> RGB888 : faster x4 (2825274 -> 616156) BGRA8888 -> RGBX8888 : faster x4 (2812530 -> 610340) BGRX8888 -> ABGR8888 : faster x4 (2793940 -> 628596) BGRX8888 -> ARGB8888 : faster x4 (2822686 -> 638899) BGRX8888 -> BGR888 : faster x4 (2818141 -> 613659) BGRX8888 -> RGB888 : faster x4 (2929017 -> 611794) BGRX8888 -> RGBA8888 : faster x4 (2799709 -> 629750) BGRX8888 -> RGBX8888 : faster x4 (2911010 -> 605640) RGB888 -> ABGR8888 : faster x4 (2800671 -> 631542) RGB888 -> BGR888 : faster x4 (2802644 -> 604461) RGB888 -> BGRA8888 : faster x4 (2801919 -> 628729) RGB888 -> BGRX8888 : faster x4 (2938244 -> 604135) RGB888 -> RGBA8888 : faster x4 (2912447 -> 642185) RGB888 -> RGBX8888 : faster x4 (2831676 -> 634293) RGBA8888 -> BGR888 : faster x4 (2928896 -> 614960) RGBA8888 -> BGRX8888 : faster x4 (2821422 -> 608146) RGBA8888 -> RGB888 : faster x4 (2825927 -> 617184) RGBX8888 -> ABGR8888 : faster x4 (2803852 -> 654129) RGBX8888 -> ARGB8888 : faster x4 (2923615 -> 642644) RGBX8888 -> BGR888 : faster x4 (2806523 -> 610447) RGBX8888 -> BGRA8888 : faster x4 (2813388 -> 630305) RGBX8888 -> BGRX8888 : faster x4 (2800052 -> 607881) RGBX8888 -> RGB888 : faster x4 (2807722 -> 610263)

bb9a9080

2019-02-07T16:13:25

Fix pointer warnings

kc3-lang/SDL/src

src

Log