|
6801d676
|
2022-11-16T09:52:33
|
|
Revert "pulseaudio: Only use PA_STREAM_ADJUST_LATENCY if buffer isn't super small."
This reverts commit d8b1ef42aee52dad4ac3de69795ca2e8d2fd7704.
This turned out to be unnecessary (it was a problem on the user's system,
not an SDL bug).
Reference Issue #6121.
|
|
|
d8b1ef42
|
2022-11-15T22:18:51
|
|
pulseaudio: Only use PA_STREAM_ADJUST_LATENCY if buffer isn't super small.
Fixes #6121.
|
|
90b86b13
|
2022-07-17T10:35:09
|
|
audio: Handle non-power-of-two spec.samples when unsupported
Fixes #3685
|
|
|
2f0816ad
|
2022-07-11T13:08:30
|
|
Add SDL_GetDefaultAudioInfo.
This API is supported on pipewire, pulseaudio, wasapi, and directsound.
Co-authored-by: Frank Praznik <frank.praznik@gmail.com>
|
|
|
f6eb4b07
|
2022-04-26T13:14:15
|
|
pulseaudio: Feed audio data in response to write callbacks.
Instead of waiting until the entire buffer from the SDL callback is ready
to be accepted by PulseAudio, we use pa_stream_set_write_callback and
feed some portion of the buffer as callbacks come in asking for more.
This lets us remove the halving of the buffer size during device open,
and also (hopefully) solves several strange hangs that happen in unusual
circumstances.
Fixes #4387
Fixes #2262
|
|
a70bb259
|
2022-01-20T13:16:03
|
|
drop handle parameter of OpenDevice
|
|
|
2eafe434
|
2022-01-20T12:18:59
|
|
cleanup/sync the main loop of *_OpenDevice functions to pick audio format
|
|
|
1043dd8c
|
2022-01-19T12:58:04
|
|
adjust handling of iscapture
- drop iscapture parameter of OpenDevice
- use SDL_bool for iscapture
|
|
|
0dda8a7f
|
2022-01-17T11:21:01
|
|
cleanup init functions of audio
- use SDL_bool if possible
- assume NULL/SDL_FALSE filled impl
- skip zfill of current_audio at the beginning of SDL_AudioInit (done before the init() calls)
|
|
120c76c8
|
2022-01-03T09:40:00
|
|
Updated copyright for 2022
|
|
|
d713a680
|
2021-11-25T22:32:40
|
|
pulseaudio: wait until at least 1/8th (!) of the mixbuffer is available.
This is to workaround systems where we hang in playback because the buffer
does not report the space for whatever reason. The system will instead block
in PlayDevice, which always immediately follows WaitDevice in modern times
so this works out, and it seems to keep the device moving forward.
For a future revision, we are either going to clean this up more properly,
or attempt to move to PulseAudio's pa_stream_set_write_callback() API, but
this will do for SDL 2.0.18.
Reference #4387 for discussion and further information.
|
|
a1ffeda0
|
2021-08-28T22:52:13
|
|
Add SDL_HINT_APP_NAME and DBUS inhibition hint
See SDL bug #4703. This implements two new hints:
- SDL_APP_NAME
- SDL_SCREENSAVER_INHIBIT_ACTIVITY_NAME
The former is the successor to SDL_HINT_AUDIO_DEVICE_APP_NAME, and acts
as a generic "application name" used both by audio drivers and DBUS
screensaver inhibition. If SDL_AUDIO_DEVICE_APP_NAME is set, it will
still take priority over SDL_APP_NAME.
The second allows the "activity name" used by
org.freedesktop.ScreenSavver's Inhibit method, which are often shown in
the UI as the reason the screensaver (and/or suspend/other
power-managment features) are disabled.
|
|
|
9504bb12
|
2021-08-23T00:47:25
|
|
pulseaudio: Fix some function signatures that expect const pointers.
This might have changed at some point in the Pulse API, or this might have
always been wrong, but we didn't notice because the dynamic loading code
hides it by casting things to void *. The static path, where it
assigns the function pointer directly, puts out a clear compiler warning,
though.
|
|
|
736a424f
|
2021-07-27T13:12:57
|
|
pulseaudio: Optionally add "monitor" sources to device list.
There's a new hint to enable this.
Fixes #2917.
|
|
|
67e8522d
|
2021-02-27T17:37:25
|
|
Add SDL_GetAudioDeviceSpec.
This API is supported by pipewire, pulseaudio, coreaudio, wasapi, and disk.
|
|
08547adb
|
2021-02-20T09:28:03
|
|
pulseaudio: Add "zerocopy" playback path
|
|
ef85ed93
|
2021-02-17T20:53:35
|
|
pulseaudio: Initialize fragsize to fix mic recording
fragsize wasn't initialized, and it is used for recording.
If the value was 0 or -1, pulseaudio configures it itself. But sometimes
we can get a random (and large) value that makes pulseaudio give us
large sample at a very low frequency.
https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/blob/master/src/pulse/def.h#L453
https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/blob/v13.0/src/pulsecore/protocol-native.c#L409
|
|
|
9130f7c3
|
2021-01-02T10:25:38
|
|
Updated copyright for 2021
|
|
|
cb361896
|
2020-12-09T07:16:22
|
|
Fixed bug 5235 - All internal sources should include SDL_assert.h
Ryan C. Gordon
We should really stick this in SDL_internal.h or something so it's always available.
|
|
a69c61fb
|
2020-08-14T12:08:58
|
|
Only assign context and mainloop once we have connected successfully
If we fail to connect to the the pa server, we have an assigned context
and mainloop that isn't connected. So, when PULSEAUDIO_pa_context_disconnect
is called, pa asserts and crashes the application.
Assertion 'pa_atomic_load(&(c)->_ref) >= 1' failed at pulse/context.c:1055, function pa_context_disconnect(). Aborting.
|
|
|
8601996f
|
2020-05-03T22:13:48
|
|
hints: Allow specifying audio device metadata.
This is only supported on PulseAudio. You can set a description when opening
your audio device that will show up in pauvcontrol, which lets you set
per-stream volume levels.
Fixes Bugzilla #4801.
|
|
|
a8780c6a
|
2020-01-16T20:49:25
|
|
Updated copyright date for 2020
|
|
|
3da6a0b2
|
2019-12-03T03:53:06
|
|
pulseaudio: don't let FlushCapture get stuck in an infinite loop on shutdown.
Fixes Bugzilla #4645.
|
|
|
5e13087b
|
2019-01-04T22:01:14
|
|
Updated copyright for 2019
|
|
|
5febdfce
|
2018-09-24T11:49:25
|
|
Fixed whitespace
|
|
|
97494f53
|
2018-02-17T18:30:21
|
|
pulseaudio: Just read/dump captured data in FlushCapture.
Apparently pa_stream_flush() doesn't work as expected:
https://lists.freedesktop.org/archives/pulseaudio-discuss/2012-April/013328.html
Fixes Bugzilla #4087.
|
|
|
e3cc5b2c
|
2018-01-03T10:03:25
|
|
Updated copyright for 2018
|
|
3639895e
|
2017-05-27T23:30:07
|
|
Removed unused errno includes.
|
|
|
45b774e3
|
2017-01-01T18:33:28
|
|
Updated copyright for 2017
|
|
|
f6a280ab
|
2016-10-07T15:13:46
|
|
audio: Don't trust audio drivers to drain pending audio.
This tends to be a frequent spot where drivers hang, and the waits were
often unreliable in any case.
Instead, our audio thread now alerts the driver that we're done streaming audio
(which currently XAudio2 uses to alert the system not to warn about the
impending underflow) and then SDL_Delay()'s for a duration that's reasonable
to drain the DMA buffers before closing the device.
|
|
|
761a7978
|
2016-08-05T01:59:06
|
|
audio: changed some SDL_memset() calls to SDL_zero(), other minor corrections.
|
|
|
9b647727
|
2016-08-05T01:44:41
|
|
audio: Clean up some CloseDevice() interface details.
- It's now always called if device->hidden isn't NULL, even if OpenDevice()
failed halfway through. This lets implementation code not have to clean up
itself on every possible failure point; just return an error and SDL will
handle it for you.
- Implementations can assume this->hidden != NULL and not check for it.
- implementations don't have to set this->hidden = NULL when done, because
the caller is always about to free(this).
- Don't reset other fields that are in a block of memory about to be free()'d.
- Implementations all now free things like internal mix buffers last, after
closing devices and such, to guarantee they definitely aren't in use anymore
at the point of deallocation.
|
|
|
979de761
|
2016-08-05T01:44:15
|
|
audio: Removed internal SDL_audiomem.h and macros.
I think this was important for SDL 1.2 because some targets needed
special device memory for DMA buffers or locked memory buffers for use in
hardware interrupts or something, but since it just defines to SDL_malloc
and SDL_free now, I took it out for clarity's sake.
|
|
|
d662bc04
|
2016-08-02T13:50:58
|
|
pulseaudio: Implemented audio capture support!
|
|
|
6d5c9c1e
|
2016-08-02T13:48:52
|
|
audio: Made some SDL_AudioDevice fields atomic.
This makes sure they're properly communicated to the audio threads.
|
|
|
9b4db2b8
|
2016-04-12T18:11:36
|
|
Patched to compile on various platforms.
|
|
|
c61675dc
|
2016-04-12T16:45:10
|
|
threads: Move SDL's own thread creation to a new internal API.
This allows us to set an explicit stack size (overriding the system default
and the global hint an app might have set), and remove all the macro salsa
for dealing with _beginthreadex and such, as internal threads always set those
to NULL anyhow.
I've taken some guesses on reasonable (and tiny!) stack sizes for our
internal threads, but some of these might turn out to be too small in
practice and need an increase. Most of them are simple functions, though.
|
|
|
42065e78
|
2016-01-02T10:10:34
|
|
Updated copyright to 2016
|
|
|
0e45984f
|
2015-06-21T17:33:46
|
|
Fixed crash if initialization of EGL failed but was tried again later.
The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly
uninitialized data structure if loading the library first failed. A later try to
use EGL then skipped initialization and assumed it was previously successful
because the data structure now already existed. This led to at least one crash
in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was
dereferenced to make a call to eglBindAPI().
|
|
|
2c4a6ea0
|
2015-05-26T06:27:46
|
|
Updated the copyright year to 2015
|
|
|
b72938c8
|
2015-04-20T12:22:44
|
|
Windows: Always set the system timer resolution to 1ms by default.
An existing hint lets apps that don't need the timer resolution changed avoid
this, to save battery, etc, but this fixes several problems in timing, audio
callbacks not firing fast enough, etc.
Fixes Bugzilla #2944.
|
|
fe6c797c
|
2015-04-10T23:30:31
|
|
Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.
|
|
|
cafd030b
|
2015-03-19T22:08:12
|
|
PulseAudio: Hotplug support!
|
|
|
7c4b88f2
|
2015-03-18T10:29:04
|
|
PulseAudio: Improved multidevice support.
Added capture device enumeration, report human-readable device name, other
cleanups.
|
|
|
43674503
|
2015-03-18T10:05:36
|
|
Patched to compile on C89 compilers.
|
|
|
9a83151e
|
2015-03-18T09:59:22
|
|
PulseAudio: Added multiple device support, other cleanups.
Thanks to Dominik Frizel for most of the effort on this!
Fixes Bugzilla #2730.
|
|
|
f9cfd9fa
|
2015-03-18T02:01:17
|
|
Bunch of reworking to how we manage audio devices.
Device enumeration now happens at startup and then is managed exclusively
through hotplugging instead of full redetection. The device name list now has
a unique "handle" associated with each item and SDL will pass this to the
backend so they don't have to figure out how a human readable name maps to
real hardware for a second time.
Other cleanups, fixes, improvements, plus all the audio backends updated to
the new interface...largely untested at this point, though.
|
|
|
0e02ce08
|
2015-03-16T02:11:39
|
|
Initial work on audio device hotplug support.
This fills in the core pieces and fully implements it for Mac OS X.
Most other platforms, at the moment, will report a disconnected device if
it fails to write audio, but don't notice if the system's device list changed
at all.
|
|
b88ca1b4
|
2015-02-10T16:28:56
|
|
the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here.
Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture.
More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802
|
|
|
b48e54aa
|
2015-01-26T22:00:29
|
|
Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation
Jonas Kulla
The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c.
I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.
|
|
70438be2
|
2014-12-03T10:55:23
|
|
WinRT: fixed bug whereby SDL would override an app's default orientation
WinRT apps can set a default, preferred orientation via a .appxmanifest file.
SDL was overriding this on app startup, and making the app use all possible
orientations (landscape and portrait).
Thanks to Eric Wing for the heads up on this!
|
|
|
9c398852
|
2014-11-22T22:20:40
|
|
Corrected header file documentation comment.
|
|
24c86b55
|
2014-09-11T19:24:42
|
|
[X11] Reconcile logical keyboard state with physical state on FocusIn
since the window system doesn't do it for us like other platforms.
This prevents sticky keys and missed keys when going in and out
of focus, for example Alt would appear to stick if switching away
from an SDL app with Alt-Tab and had to be pressed again.
CR: Sam
|
|
|
3dcb451f
|
2014-04-09T21:29:19
|
|
Added a README file regarding WinRT support
To note, this file is currently formatted with CRLF line endings, rather than
LF, to allow the file to be viewed with Notepad.
|
|
|
58edac3e
|
2014-02-02T00:53:27
|
|
Fixed bug 2374 - Update copyright for 2014...
Is it that time already??
|
|
f848adff
|
2013-11-29T10:06:08
|
|
Improve Android pause/resume behavior.
|
|
|
7e1289af
|
2013-11-24T23:56:17
|
|
Make internal SDL sources include SDL_internal.h instead of SDL_config.h
The new header will include SDL_config.h, but allows for other global stuff.
|
|
|
08fa8da7
|
2013-10-20T21:56:15
|
|
Fixed bug 2129 - fix for bug 2121 breaks linking for mingw and throws multiple warnings
Andreas Ertelt
The problem in question is caused by changeset 7771 (http://hg.libsdl.org/SDL/rev/5486e579872e / https://bugzilla.libsdl.org/show_bug.cgi?id=2121)
The redefinition of __inline__ (introduced by the addition of begin_code.h:128's "|| __STRICT_ANSI__") results in mingw's gcc throwing multiple
warning: always_inline function might not be inlinable [-Wattributes]
as well as a whole bunch of redefinitions of mingw internals which break linking of projects including the SDL2 headers.
|
|
|
f79fc33a
|
2013-08-29T08:29:21
|
|
Christoph Mallon: Remove pointless if (x) before SDL_free(x)
|
|
|
dad42067
|
2013-08-12T11:13:50
|
|
Fixes #2022, do not resume on Android when surfaceChanged
If the app is in landscape mode and the user presses the power button, a pause
is followed immediately by a surfaceChanged event because the lock screen
is shown in portrait mode. This triggers a "false" resume.
So, we just pause and resume following the onWindowFocusChanged events.
Also, wait for SDL_APP_WILLENTERBACKGROUND and SDL_APP_DIDENTERBACKGROUND before
blocking the event pump.
|
|
|
1ad936eb
|
2013-08-11T19:56:43
|
|
Fixed bug 2027 - Full-screen appears to be broken - hang in SDL_DestroyWindow()
Rainer Deyke
I'm running Linux Mint 15 with the Cinnamon window manager. SDL_DestroyWindow consistently locks up for me when the window if fullscreen.
|