kmx git

Commit	Date	Message
f0577bc9	2020-12-18T10:09:06	ControllerList: setup the ps5 default deadzone to match PS4 instead of defaulting to same a XboxOne/Switch
5f7cd1fa	2020-12-18T10:08:59	Added hints to control whether SDL updates joystick and sensor state in the main event loop
6c4ab484	2020-12-18T17:50:02	SDL_kmsdrmvideo.c: check atomic modesetting in check_modesetting() .. so that KMSDRM_CreateDevice() can fail and SDL_VideoInit() would move on to next bootstrap member which is kmsdrm_legacy. hopefully fixes bug #5393.
5c654d0d	2020-12-18T17:00:00	tests: regenerate configure using autoconf patched for AC_PATH_X11 Specifically this patch which does not invoke _AC_PATH_X_XMKMF and _AC_PATH_X_DIRECT internal autoconf routines when cross-compiling: http://git.savannah.gnu.org/gitweb/?p=autoconf.git;a=commitdiff;h=33c3a47c04ab70a4dd54963fe433a171bc03747f Without this, CFLAGS would brokenly have system include paths like -I/usr/include/X11 when cross-compiling e.g. for windows. (And it also resulted in annoying imake crashes for my setup...)
6bd4c717	2020-12-17T21:41:23	Fixed bug 5402 - ARM support little update proposal David Carlier No fix but mostly an update for ARM architecture.
10625f9d	2020-12-17T23:50:00	SDL_windowsmessagebox.c: go back to hg rev 14458 state. encountering a NULL caption in AddDialogString() is intended, i.e. AddDialogStaticIcon() sends it as NULL on purpose.
4d6eb305	2020-12-17T23:28:20	SDL_windowsmessagebox.c (AddDialogControl): add back NULL caption check. because AddDialogStaticIcon() sends a NULL caption -- fixes bug #5401.
90456670	2020-12-17T14:11:00	more "'for' loop initial declarations are only allowed in C99 mode" fixes
ed4fcb2c	2020-12-16T03:24:10	kmsdrm_legacy build fixes: - add missing '_LEGACY' to symbol names - perform missing 2.0.14 portage - fix 'for' loop initial declarations are only allowed in C99 mode errors
f484abbd	2020-12-15T14:57:51	Added Android mapping for the Xbox One Series X controller over Bluetooth
cdd39711	2020-12-15T14:57:49	Fixed the Xbox Series X controller showing up twice on Android
14f97734	2020-12-15T14:57:47	Fixed whitespace
9940e710	2020-12-16T00:10:30	Import two post-2.0.12 fixes to kmsdrm_legacy: Fix build breakage without EGL: https://hg.libsdl.org/SDL/rev/f2606fe53654e305ab9badb821d9d3afb7f92f49 Fix KMSDRM_CreateWindow segfault when starting L?VE2D engine (bug 5199) https://hg.libsdl.org/SDL/rev/d2e69a78939463d9ff9448a5f4efd1e208bb97b0
f8839289	2020-12-15T12:22:48	Potential fix for bug 5393 - KMSDRM: using atomic mode setting breaks GPU compatibility Substring I was trying the KMSDRM video backend with some very simple programs that were working ok on 2.0.12. The same code won?t work on the current dev branch and I get: DEBUG: check_modesetting: probing ?/dev/dri/card0? DEBUG: /dev/dri/card0 connector, encoder and CRTC counts are: 4 5 6 DEBUG: check_modesetting: probing ?/dev/dri/card0? DEBUG: /dev/dri/card0 connector, encoder and CRTC counts are: 4 5 6 DEBUG: KMSDRM_VideoInit() DEBUG: Opening device /dev/dri/card0 DEBUG: Opened DRM FD (3) DEBUG: no atomic modesetting support. DEBUG: Video subsystem has not been initialized INFO: Using SDL video driver: (null) DEBUG: Video subsystem has not been initialized After carefully checking, the radeon driver doesn?t support atomic modesetting. That?s not the only problem : the same happens with the amdgpu driver if we disable Display Core (kernel parameter amdgpu.dc=0, which is required to get analogue outputs working). This is a major regression in the KMSDRM driver. Using atomic mode setting is great, but having no fallback to the "standard KMS" is bad.
c02d88dd	2020-12-15T23:01:10	configury whitespace cleanup (no actual change.)
6cb78120	2020-12-15T00:42:17	Fixed bug 5399 - make install is broken as it depends on missing rule `build` Stephen Broadfoot I've tracked this down to the following changeset bb65ba8e039b https://hg.libsdl.org/SDL/diff/bb65ba8e039b/Makefile.in this changeset renames the rule `build` to `build/.created` but the rule `install-lib` still depends on the rule `build` This affects users who are trying to install via homebrew who are installing via source and not by the bottle as this invokes `make install` To be clear, the error I was hitting when running make install is make: *** No rule to make target `build', needed by `install-lib'. Stop.
716ac535	2020-12-15T01:20:00	test/acinclude.m4: rename SDL_CONFIG to SDL2_CONFIG, regenerate configure
637d425e	2020-12-15T00:11:10	whitespace.
e65e4fd3	2020-12-14T09:48:51	Fixed detecting the guide button on Xbox One S controllers over Bluetooth on Linux
f1c7cc71	2020-12-14T12:36:04	winrt: Buildfix for older UWP SDKs
bfffa275	2020-12-14T09:23:53	Fixed bug 5397 - Fcitx input is truncated sowfelicity Split the long text input event into multiple shorten text input event.
8795ca70	2020-12-14T09:15:47	Fixed bug 5241 - SDL on Linux needs a way to turn deadzones off pj5085 I added some printf to verify the math being done. Of the three joysticks I have, it works correctly for at least two, and seems to work correctly for the third. I say "seems to" because, for the third joystick, the values never go through the AxisCorrect function, and thus never hit my printf statements, even though they did in the version I wrote my patch against. I'm not sure what's going on there, but it at least seems to be working correctly in as much as I can tell. I note this result in particular, for an SNES Gamepad (min=0, max=255): Joystick value 0 becomes -32768 Joystick value 127 becomes 0 Joystick value 255 becomes 32767 Without the code that forces a zero point, the 127 input value would become -129, so I think you see why I added that code to turn it into zero. However, I think Kai Krakow has a point about how SDL shouldn't assume that there should be a center. Obviously in the majority of cases there actually should be a center, and the code that turns that 127 into an actual 0 is creating only a 0.2% error over 0.4% of this joystick's range. However, what if there is an axis that is some kind of special control, like a 4-position switch, and, for whatever reason, the joystick reports it as an axis with 4 possible values, 0 to 3? In that case, mutilating the two center values to the same value is much more of an error and and turns that 4-position switch into a 3-position switch. If any joystick does this with a 2-position switch, then this code would render that control entirely useless as it would report the same value with the switch in either position. Obviously the code could require that there be at least N possible values, to guess whether something is a proper axis or just some kind of switch, but the choice of N would be arbitrary and that's ugly. I guess the real problem here is that my gamepad is just kind of broken. It should be reporting a range of -1 to +1 since that's what it actually does. Also, as Kai Krakow points out, it's probably not SDL's place to fix broken hardware. I'll add that, if SDL does fix broken hardware, it should probably actually know that it's broken rather than be merely guessing that it is. So, to the extent that SDL is able to do stuff like this, perhaps it's something better left for the user to configure in some kind of config file.
169cfe5a	2020-12-14T11:52:09	winrt: EffectiveLocation still needs an ifdef, IsApiContractPresent is for runtime
44d4a61d	2020-12-14T08:11:40	minor cleanups to configure.ac to reduce autoconf-2.70 warnings a bit. configure output is practically unchanged. there are still lots of AC_TRY_COMPILE/AC_TRY_LINK replacements needed to really eliminate the warnings, but that's for another time.
f8078d3d	2020-12-14T05:55:20	configure.ac: use AC_DEFINE for SDL_VIDEO_DRIVER_ANDROID
3c2757ff	2020-12-13T18:25:02	windows SDL_LoadObject: fix warning after commit 2ff650230d96
15cbddf4	2020-12-13T18:00:20	linux/SDL_threadprio.c: fix build on older systems: SCHED_RESET_ON_FORK is in kernel >= 2.6.32.
3b92933a	2020-12-13T17:37:50	SDL_LoadObject (windows, os/2): prevent crash if dll name is NULL.
f674009c	2020-12-13T16:51:20	fix typo from commit 63349df2610a (fixes bug 5396)
b6e63625	2020-12-13T15:32:24	fix bug #5395: handle old systems where inotify_init1 is not available
ee85a41a	2020-12-13T02:10:46	Fixed compile warning
64f448b2	2020-12-13T02:01:39	libusb hid.c is already included in SDL_hidapi.c
706f6375	2020-12-13T01:58:05	Fixed build for platforms with only libusb hidapi implementations
80e5c689	2020-12-13T01:20:38	Fixed the PS5 controller not disconnecting when powered off
c8ee0691	2020-12-13T00:15:54	Added SDL_misc.h to the Xcode built frameworks
ce7c751c	2020-12-12T23:54:40	Document that the joystick deadzone hint defaults off
db0a2025	2020-12-12T23:48:02	Fixed bug 5241 - SDL on Linux needs a way to turn deadzones off pj5085 It occurred to me that my simple patch that comments out a few lines of code does not correctly remove the dead zone since the calculation presumably assumes the dead zone has been cut out of the range. Then, while looking into how to make it output the correct range of values, I realized SDL wasn't returning the correct range of values to begin with. This line of code was already present: printf("Values = { %d, %d, %d, %d, %d }\n", absinfo.value, absinfo.minimum, absinfo.maximum, absinfo.fuzz, absinfo.flat); For my joystick this yeilds: Values = { 0, -127, 127, 0, 15 } Then this code calculates the coefficients: In SDL1: joystick->hwdata->abs_correct[i].coef[0] = (absinfo.maximum + absinfo.minimum) / 2 - absinfo.flat; joystick->hwdata->abs_correct[i].coef[1] = (absinfo.maximum + absinfo.minimum) / 2 + absinfo.flat; t = ((absinfo.maximum - absinfo.minimum) / 2 - 2 * absinfo.flat); if ( t != 0 ) { joystick->hwdata->abs_correct[i].coef[2] = (1 << 29) / t; } else { joystick->hwdata->abs_correct[i].coef[2] = 0; } In SDL2: joystick->hwdata->abs_correct[i].coef[0] = (absinfo.maximum + absinfo.minimum) - 2 * absinfo.flat; joystick->hwdata->abs_correct[i].coef[1] = (absinfo.maximum + absinfo.minimum) + 2 * absinfo.flat; t = ((absinfo.maximum - absinfo.minimum) - 4 * absinfo.flat); if (t != 0) { joystick->hwdata->abs_correct[i].coef[2] = (1 << 28) / t; } else { joystick->hwdata->abs_correct[i].coef[2] = 0; } Neither calculates the correct coefficients for the code in the AxisCorrect function. In SDL1: if ( value > correct->coef[0] ) { if ( value < correct->coef[1] ) { return 0; } value -= correct->coef[1]; } else { value -= correct->coef[0]; } value = correct->coef[2]; value >>= 14; In SDL2: value = 2; if (value > correct->coef[0]) { if (value < correct->coef[1]) { return 0; } value -= correct->coef[1]; } else { value -= correct->coef[0]; } In SDL1, the calculated coefficients are coef[0]=15, coef[1]=-15 and coef[2]=5534751. So with a full-scale input of 127, it calculates an output value of 37835, which is considerably out of range. In SDL2, the calculated coefficients are coef[0]=30, coef[1]=-30, and coef[2]=1383687. So with a full-scale input of 127, it calculates the same output value of 37835. I tested it with the 3 joysticks I have, and it produces out-of-range values for all of them. Anyway, since dead zones are garbage, I just deleted all of that junk and wrote some code that takes the absinfo.minimum and absinfo.maximum values and uses them to scale the axis range to -32767 through +32767. I also made it detect when a range doesn't have an integer center point, e.g. the center of -128 to + 127 is -0.5. In such cases, if either value to the side of the center is provided, it zeros it, but it otherwise doesn't implement any kind of dead zone. This seemed important with my gamepad which provides only the values of 0, 127, and 255, since without this hack it would never be centered. Also, the previous minimum output value was -32768, but as that creates an output range that has no true center, I changed the minimum value to -32767. I tested it with the 3 joystick devices I have and it seems to create correct values for all of them.
0ccb3afd	2020-12-12T22:33:11	Fixed polling values after SYN_DROPPED event
9ee0e888	2020-12-12T22:11:00	Whoops, make the hint actually default to false
13a4caf1	2020-12-12T22:08:02	Fixed bug 4286 - Joystick subsystem causes "not responding" when app is in the background Added a hint to control whether a separate thread should be used for joystick events. This is off by default because dispatching messages in other threads appears to cause problems on some versions of Windows.
bca9decb	2020-12-12T23:28:10	fix bug #5394 - define _DARWIN_C_SOURCE only if not already defined
5c212cb0	2020-12-10T12:24:24	remove a few stale NULL message/title checks after commit e2b729b1756a top-level guarantees non-NULL message / title passed in messageboxdata
f1cab8ae	2020-12-10T11:20:56	fix bug #5253: handle NULL title or message fields in SDL_MessageBoxData - SDL_video.c (SDL_ShowMessageBox): replace messageboxdata, set title or message field to "" if either of them is NULL. - SDL_video.c (SDL_ShowSimpleMessageBox): set title or message to "" if either of them is NULL for EMSCRIPTEN builds. - SDL_bmessagebox.cc: add empty string check along with NULL check for title and message fields. - SDL_windowsmessagebox.c (AddDialogString): remove NULL string check - SDL_windowsmessagebox.c (AddDialogControl): add empty string check along with the NULL check. - SDL_x11messagebox.c: revert commit 677c4cd68069 - SDL_os2messagebox.c: revert commit 2c2a489d76e7 - test/testmessage.c: Add NULL title and NULL message tests.
eec73dfd	2020-12-09T20:31:00	configure.ac (CheckJoystickMFI): changed AC_TRY_COMPILE to AC_TRY_LINK so as to discover GameController and CoreHaptics frameworks at compile time.
797a6910	2020-12-09T20:28:51	Fixed bug 5375 - WGI: Fix HSTRING memory leak. Joel Linn TLDR; https://godbolt.org/z/43fd8G Let's deduce this from C++ reference code: https://docs.microsoft.com/en-us/cpp/cppcx/wrl/how-to-activate-and-use-a-windows-runtime-component-using-wrl?view=msvc-160 At the bottom of the page there is this snippet: ``` int wmain() { /* ... more code ... */ // Get the domain part of the URI. HString domainName; hr = uri->get_Domain(domainName.GetAddressOf()); if (FAILED(hr)) { return PrintError(__LINE__, hr); } // Print the domain name and return. wprintf_s(L"Domain name: %s\n", domainName.GetRawBuffer(nullptr)); // All smart pointers and RAII objects go out of scope here. } ``` `HString` is defined in `corewrappers.h` and the call chain for the destructor is: `~HString() -> Release() -> ::WindowsDeleteString()` QED
d3d2aee7	2020-12-09T10:39:36	Fixed the name of the PS5 hint
a77a0715	2020-12-09T07:50:15	Disabled raw input debug output
d46dd103	2020-12-09T07:49:07	Fixed typo in Vulkan load logic
45e3521d	2020-12-09T07:32:10	Backed out changes for 5366 - cmake build doesn't detect Metal on macOS These changes introduce regressions for other build environments, so I'm backing them out until we sort out the correct fix.
bd032c1f	2020-12-09T07:26:59	Fixed bug 5221 - libusb isn't detected correctly in CMake Sven-Hendrik Haase In CMake I currently have trouble activating hidapi support as libusb-1.0 isn't ever correctly detected as it's searched for by the wrong name. configure.ac correctly does this: PKG_CHECK_MODULES([LIBUSB], [libusb-1.0], have_libusb=yes, have_libusb=no) However, sdlchecks.cmake does this: pkg_check_modules(LIBUSB libusb) but it needs to be: pkg_check_modules(LIBUSB libusb-1.0)
7fa5e95b	2020-12-09T07:23:47	Fixed bug 5213 - Add support to metal in iOS/tvOS simulator Vincent Hamm Xcode11 and ios13 added support for metal simulator. Here is a quick and dirty patch to enable it. Pretty early and only tested on a few samples for now. Required mostly to enable metal support on correct version of ios, generate simulator compatible shaders and enforce buffer alignments on simulator (same as osx).
cb361896	2020-12-09T07:16:22	Fixed bug 5235 - All internal sources should include SDL_assert.h Ryan C. Gordon We should really stick this in SDL_internal.h or something so it's always available.
479db430	2020-12-09T06:56:34	Fixed bug 5250 - updaterev.sh failed using CMake Tools on VSCode Remote Sebastian Vargas Vargas Running CMake configure from a Windows Subsystem for Linux using Visual Studio Code Remote doesn't generate the header file with the current source revision, it throws "/home/sebva/SDL/build-scripts/updaterev.sh: 13: cannot create /mnt/c/Users/sebva/.vscode/extensions/ms-vscode-remote.remote-wsl-0.44.4/include/SDL_revision.h.new: Directory nonexistent".
88cb4962	2020-12-09T06:42:31	Fixed bug 5291 - SDL_SetRenderTarget unnecessarily changes target when current target is the native texture of the passed in texture
f2fff217	2020-12-09T06:24:40	Fixed bug 5374 - WGI: Use fast-pass strings. Joel Linn Eliminate additional heap allocation for short-lived HSTRINGs. Uses `WindowsCreateStringReference()` to disable reference counting and memory management by the Window Runtime.
42c5b4ac	2020-12-09T06:17:55	Fixed bug 5366 - cmake build doesn't detect Metal on macOS Tom Seddon 2nd time lucky, perhaps. patch 2 applies to current HEAD at time of writing - 4eb049c9bb1ca94efe3c40b57beda3169984d0cb from https://github.com/SDL-mirror/SDL. This basically goes back to what was there originally, but now manually adding "-x objective-c" to the clang command line rather than "-ObjC". clang is then invoked without the "-x c" that was causing the problem, the snippet builds, and Metal is detected. (I had a quick trawl through the cmake code, but I couldn't see where this is handled.) I was moved to try this after finding SDL's own CHECK_OBJC_SOURCE_COMPILES macro, and noting what it does: https://github.com/SDL-mirror/SDL/blob/4eb049c9bb1ca94efe3c40b57beda3169984d0cb/cmake/macros.cmake#L67 An alternative fix of course would be to use CHECK_OBJC_SOURCE_COMPILES instead of cmake's check_objc_source_compiles - but that had the same problem of getting confused by "return 0;". (Maybe that's because it's a macro? I'll defer to a cmake expert on this one.) I decided in the end to err on the side of leaving things looking basically the same as they were before my first patch.
475405e0	2020-12-09T12:03:24	CMakeLists.txt: sync DYLIB_CURRENT_VERSION to Xcode project
250a0557	2020-12-09T12:01:10	fix bug #5384 -- define DLL_EXPORT in DLL builds and adjust begin_code.h
50203d58	2020-12-08T22:00:06	Fixed bug 5329 - SDL_SetWindowGrab(SDL_FALSE) fails to unlock cursor if window is partially offscreen Ivan Mogilko With SDL 2.0.12 under MS Windows, if the window is partially offscreen calling SDL_SetWindowGrab(w, SDL_TRUE) works, but subsequent call to SDL_SetWindowGrab(w, SDL_FALSE) does not work. I tested this in both real program, and a small test app, where unlocking cursor worked perfectly while window is fully in desktop bounds, but did not work if it was at least few pixels outside. For the reference, following code is enough to reproduce the issue: #include <windows.h> #include <SDL.h> int WinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance, LPSTR lpCmdLine, int nShowCmd) { SDL_Init(SDL_INIT_VIDEO); SDL_Window* w = SDL_CreateWindow("", SDL_WINDOWPOS_CENTERED, SDL_WINDOWPOS_CENTERED, 640, 400, 0); bool grabbed = false; bool want_quit = false; while (!want_quit) { SDL_Event event; while (SDL_PollEvent(&event)) { switch (event.type) { case SDL_QUIT: want_quit = true; break; case SDL_KEYDOWN: if (event.key.keysym.scancode == SDL_SCANCODE_SPACE) { SDL_SetWindowGrab(w, static_cast<SDL_bool>(!grabbed)); grabbed = !grabbed; } } } } SDL_DestroyWindow(w); SDL_Quit(); return 0; }
43aad966	2020-12-08T19:03:50	Fixed bug 5222 - Crash when running with -DHIDAPI=ON Mathieu Eyraud SDL dynamically loads libusb but does not check the return value of 'SDL_LoadFunction'. Also libusb is loaded and initialized several time because 'SDL_hidapi_wasinit' is never set to true. I made a patch if you want to test: - check that 'hid_init' is called once and only once, - check return value of 'hid_init', - check return value of 'SDL_LoadFunction', - check return value of 'SDL_malloc', - add some debug logging.
a2098a47	2020-12-08T18:56:06	Updated SDL to 2.0.14 in preparation for release candidate
2a9591a9	2020-12-08T09:16:34	Accepted patch https://github.com/microsoft/vcpkg/blob/master/ports/sdl2/fix-space-in-path.patch
7f1c6e82	2020-12-08T09:13:08	Accepted patch https://github.com/microsoft/vcpkg/blob/master/ports/sdl2/enable-winrt-cmake.patch
7665f887	2020-12-08T09:07:21	Accepted patch https://github.com/microsoft/vcpkg/blob/master/ports/sdl2/disable-wcslcpy-and-wcslcat-for-windows.patch
695499ae	2020-12-08T09:04:28	Accepted patch https://github.com/microsoft/vcpkg/blob/master/ports/sdl2/disable-hidapi-for-uwp.patch
5610e5ae	2020-12-08T00:11:10	Makefile.os2: disable W303 (add -wcd=303 to CFLAGS) newer OpenWatcom versions enable W303 by default. without this, we get multiple "Parameter '%s' has been defined, but not referenced" warnings.
c9723c40	2020-12-07T09:38:21	Fixed potential hang in joystick close if the rumble thread is blocked for some reason It's still possible to hang when shutting down, if the rumble thread is still hung, but it won't block indefinitely at runtime.
3c68051e	2020-12-04T15:47:28	Allow background input when testing game controllers
09909d02	2020-12-03T19:44:47	Fixed handling of BACK button on newer Xbox One S controllers
54e5136b	2020-12-03T18:17:04	Refactored Xbox One Bluetooth protocol and verified Xbox One S, Xbox Series X, and Xbox One Elite Series 2 controllers
1031231b	2020-12-03T18:17:03	Fixed duplicating a device between XInput and HIDAPI
59f28b7f	2020-12-03T18:17:01	Fixed whitespace
f487d63a	2020-12-03T18:16:56	Fixed crash when printing NULL wide character string
754286c6	2020-12-02T13:45:24	SDL Renderer: specify the correct flag when recreating the window
035f8f23	2020-12-02T13:37:59	SDL_RecreateWindow: allow clearing VULKAN when recreating the window
93fbab0f	2020-12-02T11:04:53	SDL_ReCreateWindow: allow to unload METAL window and switch back to OpenGL. On older mac, where METAL Renderer METAL fails to create, it allows to switch back to OpenGL SDL_Renderer by re-creating the window (METAL flags was previously persistent).
7854f43b	2020-12-01T14:43:15	Disable SDL_JOYSTICK_HIDAPI on iOS and tvOS by default It's only needed for Steam Controller support, and introduces a Bluetooth framework dependency which requires additional permissions on the App Store.
ebf315e0	2020-12-01T14:01:12	Fixed bug 5369 - iOS static library build copies public headers files into xcode archive Dominik Reichardt Trying to integrate the latest SDL2 changes into our iOS project of Exult I've stumbled over the fact that when I added the static iOS library the public header files were copied to the archive of our project when you let Xcode build the archive. This makes the archive invalid for upload to the AppStore Connect. To fix this you need to delete the public headers from the build phase: Open the xcode project, select the target "Static Library-ios", got to build phases, and in "headers" delete all the headers in the "public" group. This is safe to do as this actually just copies the public headers for some odd counterintuitive reason. I think this needs to be done for all the library build targets but likely not for the framework targets.
4b35a18d	2020-12-01T13:50:42	Fixed bug 5366 - cmake build doesn't detect Metal on macOS Tom Seddon This is as of commit 50d804ea729accf9e3a9ce83238d0a2976a17545 from https://github.com/SDL-mirror/SDL, which is HEAD as I write (apologies, not confident with Mercurial) # Config macOS: 10.14.6 (18G6042) cmake --version: cmake version 3.16.20200101-g23e782c clang --version: Apple clang version 11.0.0 (clang-1100.0.33.17) Xcode version: Version 11.3.1 (11C504) # Repro steps Run the following commands in the shell. cd /tmp/ git clone https://github.com/SDL-mirror/SDL mkdir build.SDL cd build.SDL cmake -G ../SDL/ Examine cmake output. # Expected result Metal is detected. # Actual result It appears that Metal is not detected! Note this line in the summary: -- RENDER_METAL (Wanted: 0): OFF # Fix Change check_c_source_compiles to check_objc_source_compiles. The cmake script tries to add -ObjC to the clang command line, but, for whatever reason, this doesn't seem to work. Change the test source to have an empty main. The "return 0;" line seems to confuse cmake somehow, causing it to crap out with an error about HAVE_FRAMEWORK_METAL being an unknown argument. (Maybe I'm just dense, but it's not obvious to me what the problem is here.) With these two changes: -- RENDER_METAL (Wanted: ON): ON Patch attached.
798b2288	2020-12-01T13:46:34	Fixed bug 5367 - SDL_OpenUrl disabled on iOS due to unified Xcode project file Dominik Reichardt When you unified the Xcode project file you forgot to add the iOS file (/src/misc/ios/SDL_sysurl.m) to the project file, so the dummy in that folder takes over and the call does not work. Relevant commits: http://hg.libsdl.org/SDL/rev/c86bbf75f55e (SDL_OpenUrl enabled for macOS/iOS) http://hg.libsdl.org/SDL/rev/282c3dc1cf65 (and following: unified Xcode project files) Adding an ios group in the misc group of the project file and then adding /src/misc/ios/SDL_sysurl.m to it fixes the problem.
c78ca2d1	2020-12-01T13:38:42	Fixed bug 5371 - Rawinput: Fix truncating cast of string length. Joel Linn Fixes an implicit truncation of a string length on 64bit systems.
a3ccf9ad	2020-12-01T13:36:41	Fixed bug 5373 - [PATCH] Rawinput: Get correlated XInput battery info Joel Linn Currently the rawinput driver always reports a device as "wired". This changes that to "unknown" and updates it once the device is correlated with xinput.
e3966e25	2020-11-30T13:04:30	Use the correct internal API for updating the battery level for PS5 controllers
f4ed07de	2020-11-30T13:02:34	We don't know whether the PS5 controller is Bluetooth or not when we open it
04f0fd13	2020-11-27T18:57:42	Remember to close the game controller when we're done with it
1f2f536b	2020-11-27T18:57:40	Fixed XInput correlation for raw input controllers after hotplug events
012471e9	2020-11-27T18:57:38	Open and test all connected controllers
1c865c46	2020-11-27T18:57:36	Load the raw input device list at init time so it's available when DirectInput is doing device detection
a0c5bfa3	2020-11-27T13:08:40	Moved raw input event processing from the main thread to the joystick thread This allows fast joystick event delivery regardless of what the main thread is doing.
4fbefbe2	2020-11-27T11:33:53	Sort the raw input axes by usage, so X comes before Y, etc.
4ddac485	2020-11-27T11:33:51	Backed out minor optimization that prevented correlation_id from being set
8973a258	2020-11-27T10:44:56	Enable dispatching of WM_INPUT_DEVICE_CHANGE events directly, in case the application hasn't created a window with the normal message loop
e8adc648	2020-11-27T10:44:55	Enable dispatching of WM_INPUT events directly, in case the application hasn't created a window with the normal message loop
0252235e	2020-11-27T10:44:53	Recheck devices if another API queries raw input for a new device
a7dede7e	2020-11-27T10:44:51	Re-enable axis correlation for raw input controllers, for twin stick shooters that don't need face buttons
ce77966d	2020-11-27T10:44:49	Fixed RAWINPUT_IsDevicePresent() not returning TRUE for Xbox One controllers
8a449de2	2020-11-27T10:44:47	Fixed Xbox 360 wireless controller being picked up by WGI when it's being managed by RAWINPUT
37c9e4af	2020-11-27T06:03:15	Fixed processing WM_INPUT_DEVICE_CHANGE at startup
248fc75b	2020-11-27T05:53:56	Correlate just based on buttons, joystick axes are not as precise and could potentially cause incorrect uncorrelation. It's okay if the triggers aren't precise until someone presses a button on their controller.
e7e615de	2020-11-27T05:53:54	Removed extraneous windows message pumping Most of the raw input events are dispatched in the main windows message loop. We only dispatch device change messages separately when we need them to be completely up to date.

f0577bc9

2020-12-18T10:09:06

ControllerList: setup the ps5 default deadzone to match PS4 instead of defaulting to same a XboxOne/Switch

5f7cd1fa

2020-12-18T10:08:59

Added hints to control whether SDL updates joystick and sensor state in the main event loop

6c4ab484

2020-12-18T17:50:02

SDL_kmsdrmvideo.c: check atomic modesetting in check_modesetting() .. so that KMSDRM_CreateDevice() can fail and SDL_VideoInit() would move on to next bootstrap member which is kmsdrm_legacy. hopefully fixes bug #5393.

5c654d0d

2020-12-18T17:00:00

tests: regenerate configure using autoconf patched for AC_PATH_X11 Specifically this patch which does not invoke _AC_PATH_X_XMKMF and _AC_PATH_X_DIRECT internal autoconf routines when cross-compiling: http://git.savannah.gnu.org/gitweb/?p=autoconf.git;a=commitdiff;h=33c3a47c04ab70a4dd54963fe433a171bc03747f Without this, CFLAGS would brokenly have system include paths like -I/usr/include/X11 when cross-compiling e.g. for windows. (And it also resulted in annoying imake crashes for my setup...)

6bd4c717

2020-12-17T21:41:23

Fixed bug 5402 - ARM support little update proposal David Carlier No fix but mostly an update for ARM architecture.

10625f9d

2020-12-17T23:50:00

SDL_windowsmessagebox.c: go back to hg rev 14458 state. encountering a NULL caption in AddDialogString() is intended, i.e. AddDialogStaticIcon() sends it as NULL on purpose.

4d6eb305

2020-12-17T23:28:20

SDL_windowsmessagebox.c (AddDialogControl): add back NULL caption check. because AddDialogStaticIcon() sends a NULL caption -- fixes bug #5401.

90456670

2020-12-17T14:11:00

more "'for' loop initial declarations are only allowed in C99 mode" fixes

ed4fcb2c

2020-12-16T03:24:10

kmsdrm_legacy build fixes: - add missing '_LEGACY' to symbol names - perform missing 2.0.14 portage - fix 'for' loop initial declarations are only allowed in C99 mode errors

f484abbd

2020-12-15T14:57:51

Added Android mapping for the Xbox One Series X controller over Bluetooth

cdd39711

2020-12-15T14:57:49

Fixed the Xbox Series X controller showing up twice on Android

14f97734

2020-12-15T14:57:47

Fixed whitespace

9940e710

2020-12-16T00:10:30

Import two post-2.0.12 fixes to kmsdrm_legacy: Fix build breakage without EGL: https://hg.libsdl.org/SDL/rev/f2606fe53654e305ab9badb821d9d3afb7f92f49 Fix KMSDRM_CreateWindow segfault when starting L?VE2D engine (bug 5199) https://hg.libsdl.org/SDL/rev/d2e69a78939463d9ff9448a5f4efd1e208bb97b0

f8839289

2020-12-15T12:22:48

Potential fix for bug 5393 - KMSDRM: using atomic mode setting breaks GPU compatibility Substring I was trying the KMSDRM video backend with some very simple programs that were working ok on 2.0.12. The same code won?t work on the current dev branch and I get: DEBUG: check_modesetting: probing ?/dev/dri/card0? DEBUG: /dev/dri/card0 connector, encoder and CRTC counts are: 4 5 6 DEBUG: check_modesetting: probing ?/dev/dri/card0? DEBUG: /dev/dri/card0 connector, encoder and CRTC counts are: 4 5 6 DEBUG: KMSDRM_VideoInit() DEBUG: Opening device /dev/dri/card0 DEBUG: Opened DRM FD (3) DEBUG: no atomic modesetting support. DEBUG: Video subsystem has not been initialized INFO: Using SDL video driver: (null) DEBUG: Video subsystem has not been initialized After carefully checking, the radeon driver doesn?t support atomic modesetting. That?s not the only problem : the same happens with the amdgpu driver if we disable Display Core (kernel parameter amdgpu.dc=0, which is required to get analogue outputs working). This is a major regression in the KMSDRM driver. Using atomic mode setting is great, but having no fallback to the "standard KMS" is bad.

c02d88dd

2020-12-15T23:01:10

configury whitespace cleanup (no actual change.)

6cb78120

2020-12-15T00:42:17

Fixed bug 5399 - make install is broken as it depends on missing rule `build` Stephen Broadfoot I've tracked this down to the following changeset bb65ba8e039b https://hg.libsdl.org/SDL/diff/bb65ba8e039b/Makefile.in this changeset renames the rule `build` to `build/.created` but the rule `install-lib` still depends on the rule `build` This affects users who are trying to install via homebrew who are installing via source and not by the bottle as this invokes `make install` To be clear, the error I was hitting when running make install is make: *** No rule to make target `build', needed by `install-lib'. Stop.

716ac535

2020-12-15T01:20:00

test/acinclude.m4: rename SDL_CONFIG to SDL2_CONFIG, regenerate configure

637d425e

2020-12-15T00:11:10

whitespace.

e65e4fd3

2020-12-14T09:48:51

Fixed detecting the guide button on Xbox One S controllers over Bluetooth on Linux

f1c7cc71

2020-12-14T12:36:04

winrt: Buildfix for older UWP SDKs

bfffa275

2020-12-14T09:23:53

Fixed bug 5397 - Fcitx input is truncated sowfelicity Split the long text input event into multiple shorten text input event.

8795ca70

2020-12-14T09:15:47

Fixed bug 5241 - SDL on Linux needs a way to turn deadzones off pj5085 I added some printf to verify the math being done. Of the three joysticks I have, it works correctly for at least two, and seems to work correctly for the third. I say "seems to" because, for the third joystick, the values never go through the AxisCorrect function, and thus never hit my printf statements, even though they did in the version I wrote my patch against. I'm not sure what's going on there, but it at least seems to be working correctly in as much as I can tell. I note this result in particular, for an SNES Gamepad (min=0, max=255): Joystick value 0 becomes -32768 Joystick value 127 becomes 0 Joystick value 255 becomes 32767 Without the code that forces a zero point, the 127 input value would become -129, so I think you see why I added that code to turn it into zero. However, I think Kai Krakow has a point about how SDL shouldn't assume that there should be a center. Obviously in the majority of cases there actually should be a center, and the code that turns that 127 into an actual 0 is creating only a 0.2% error over 0.4% of this joystick's range. However, what if there is an axis that is some kind of special control, like a 4-position switch, and, for whatever reason, the joystick reports it as an axis with 4 possible values, 0 to 3? In that case, mutilating the two center values to the same value is much more of an error and and turns that 4-position switch into a 3-position switch. If any joystick does this with a 2-position switch, then this code would render that control entirely useless as it would report the same value with the switch in either position. Obviously the code could require that there be at least N possible values, to guess whether something is a proper axis or just some kind of switch, but the choice of N would be arbitrary and that's ugly. I guess the real problem here is that my gamepad is just kind of broken. It should be reporting a range of -1 to +1 since that's what it actually does. Also, as Kai Krakow points out, it's probably not SDL's place to fix broken hardware. I'll add that, if SDL does fix broken hardware, it should probably actually know that it's broken rather than be merely guessing that it is. So, to the extent that SDL is able to do stuff like this, perhaps it's something better left for the user to configure in some kind of config file.

169cfe5a

2020-12-14T11:52:09

winrt: EffectiveLocation still needs an ifdef, IsApiContractPresent is for runtime

44d4a61d

2020-12-14T08:11:40

minor cleanups to configure.ac to reduce autoconf-2.70 warnings a bit. configure output is practically unchanged. there are still lots of AC_TRY_COMPILE/AC_TRY_LINK replacements needed to really eliminate the warnings, but that's for another time.

f8078d3d

2020-12-14T05:55:20

configure.ac: use AC_DEFINE for SDL_VIDEO_DRIVER_ANDROID

3c2757ff

2020-12-13T18:25:02

windows SDL_LoadObject: fix warning after commit 2ff650230d96

15cbddf4

2020-12-13T18:00:20

linux/SDL_threadprio.c: fix build on older systems: SCHED_RESET_ON_FORK is in kernel >= 2.6.32.

3b92933a

2020-12-13T17:37:50

SDL_LoadObject (windows, os/2): prevent crash if dll name is NULL.

f674009c

2020-12-13T16:51:20

fix typo from commit 63349df2610a (fixes bug 5396)

b6e63625

2020-12-13T15:32:24

fix bug #5395: handle old systems where inotify_init1 is not available

ee85a41a

2020-12-13T02:10:46

Fixed compile warning

64f448b2

2020-12-13T02:01:39

libusb hid.c is already included in SDL_hidapi.c

706f6375

2020-12-13T01:58:05

Fixed build for platforms with only libusb hidapi implementations

80e5c689

2020-12-13T01:20:38

Fixed the PS5 controller not disconnecting when powered off

c8ee0691

2020-12-13T00:15:54

Added SDL_misc.h to the Xcode built frameworks

ce7c751c

2020-12-12T23:54:40

Document that the joystick deadzone hint defaults off

db0a2025

2020-12-12T23:48:02

Fixed bug 5241 - SDL on Linux needs a way to turn deadzones off pj5085 It occurred to me that my simple patch that comments out a few lines of code does not correctly remove the dead zone since the calculation presumably assumes the dead zone has been cut out of the range. Then, while looking into how to make it output the correct range of values, I realized SDL wasn't returning the correct range of values to begin with. This line of code was already present: printf("Values = { %d, %d, %d, %d, %d }\n", absinfo.value, absinfo.minimum, absinfo.maximum, absinfo.fuzz, absinfo.flat); For my joystick this yeilds: Values = { 0, -127, 127, 0, 15 } Then this code calculates the coefficients: In SDL1: joystick->hwdata->abs_correct[i].coef[0] = (absinfo.maximum + absinfo.minimum) / 2 - absinfo.flat; joystick->hwdata->abs_correct[i].coef[1] = (absinfo.maximum + absinfo.minimum) / 2 + absinfo.flat; t = ((absinfo.maximum - absinfo.minimum) / 2 - 2 * absinfo.flat); if ( t != 0 ) { joystick->hwdata->abs_correct[i].coef[2] = (1 << 29) / t; } else { joystick->hwdata->abs_correct[i].coef[2] = 0; } In SDL2: joystick->hwdata->abs_correct[i].coef[0] = (absinfo.maximum + absinfo.minimum) - 2 * absinfo.flat; joystick->hwdata->abs_correct[i].coef[1] = (absinfo.maximum + absinfo.minimum) + 2 * absinfo.flat; t = ((absinfo.maximum - absinfo.minimum) - 4 * absinfo.flat); if (t != 0) { joystick->hwdata->abs_correct[i].coef[2] = (1 << 28) / t; } else { joystick->hwdata->abs_correct[i].coef[2] = 0; } Neither calculates the correct coefficients for the code in the AxisCorrect function. In SDL1: if ( value > correct->coef[0] ) { if ( value < correct->coef[1] ) { return 0; } value -= correct->coef[1]; } else { value -= correct->coef[0]; } value *= correct->coef[2]; value >>= 14; In SDL2: value *= 2; if (value > correct->coef[0]) { if (value < correct->coef[1]) { return 0; } value -= correct->coef[1]; } else { value -= correct->coef[0]; } In SDL1, the calculated coefficients are coef[0]=15, coef[1]=-15 and coef[2]=5534751. So with a full-scale input of 127, it calculates an output value of 37835, which is considerably out of range. In SDL2, the calculated coefficients are coef[0]=30, coef[1]=-30, and coef[2]=1383687. So with a full-scale input of 127, it calculates the same output value of 37835. I tested it with the 3 joysticks I have, and it produces out-of-range values for all of them. Anyway, since dead zones are garbage, I just deleted all of that junk and wrote some code that takes the absinfo.minimum and absinfo.maximum values and uses them to scale the axis range to -32767 through +32767. I also made it detect when a range doesn't have an integer center point, e.g. the center of -128 to + 127 is -0.5. In such cases, if either value to the side of the center is provided, it zeros it, but it otherwise doesn't implement any kind of dead zone. This seemed important with my gamepad which provides only the values of 0, 127, and 255, since without this hack it would never be centered. Also, the previous minimum output value was -32768, but as that creates an output range that has no true center, I changed the minimum value to -32767. I tested it with the 3 joystick devices I have and it seems to create correct values for all of them.

0ccb3afd

2020-12-12T22:33:11

Fixed polling values after SYN_DROPPED event

9ee0e888

2020-12-12T22:11:00

Whoops, make the hint actually default to false

13a4caf1

2020-12-12T22:08:02

Fixed bug 4286 - Joystick subsystem causes "not responding" when app is in the background Added a hint to control whether a separate thread should be used for joystick events. This is off by default because dispatching messages in other threads appears to cause problems on some versions of Windows.

bca9decb

2020-12-12T23:28:10

fix bug #5394 - define _DARWIN_C_SOURCE only if not already defined

5c212cb0

2020-12-10T12:24:24

remove a few stale NULL message/title checks after commit e2b729b1756a top-level guarantees non-NULL message / title passed in messageboxdata

f1cab8ae

2020-12-10T11:20:56

fix bug #5253: handle NULL title or message fields in SDL_MessageBoxData - SDL_video.c (SDL_ShowMessageBox): replace messageboxdata, set title or message field to "" if either of them is NULL. - SDL_video.c (SDL_ShowSimpleMessageBox): set title or message to "" if either of them is NULL for EMSCRIPTEN builds. - SDL_bmessagebox.cc: add empty string check along with NULL check for title and message fields. - SDL_windowsmessagebox.c (AddDialogString): remove NULL string check - SDL_windowsmessagebox.c (AddDialogControl): add empty string check along with the NULL check. - SDL_x11messagebox.c: revert commit 677c4cd68069 - SDL_os2messagebox.c: revert commit 2c2a489d76e7 - test/testmessage.c: Add NULL title and NULL message tests.

eec73dfd

2020-12-09T20:31:00

configure.ac (CheckJoystickMFI): changed AC_TRY_COMPILE to AC_TRY_LINK so as to discover GameController and CoreHaptics frameworks at compile time.

797a6910

2020-12-09T20:28:51

Fixed bug 5375 - WGI: Fix HSTRING memory leak. Joel Linn TLDR; https://godbolt.org/z/43fd8G Let's deduce this from C++ reference code: https://docs.microsoft.com/en-us/cpp/cppcx/wrl/how-to-activate-and-use-a-windows-runtime-component-using-wrl?view=msvc-160 At the bottom of the page there is this snippet: ``` int wmain() { /* ... more code ... */ // Get the domain part of the URI. HString domainName; hr = uri->get_Domain(domainName.GetAddressOf()); if (FAILED(hr)) { return PrintError(__LINE__, hr); } // Print the domain name and return. wprintf_s(L"Domain name: %s\n", domainName.GetRawBuffer(nullptr)); // All smart pointers and RAII objects go out of scope here. } ``` `HString` is defined in `corewrappers.h` and the call chain for the destructor is: `~HString() -> Release() -> ::WindowsDeleteString()` QED

d3d2aee7

2020-12-09T10:39:36

Fixed the name of the PS5 hint

a77a0715

2020-12-09T07:50:15

Disabled raw input debug output

d46dd103

2020-12-09T07:49:07

Fixed typo in Vulkan load logic

45e3521d

2020-12-09T07:32:10

Backed out changes for 5366 - cmake build doesn't detect Metal on macOS These changes introduce regressions for other build environments, so I'm backing them out until we sort out the correct fix.

bd032c1f

2020-12-09T07:26:59

Fixed bug 5221 - libusb isn't detected correctly in CMake Sven-Hendrik Haase In CMake I currently have trouble activating hidapi support as libusb-1.0 isn't ever correctly detected as it's searched for by the wrong name. configure.ac correctly does this: PKG_CHECK_MODULES([LIBUSB], [libusb-1.0], have_libusb=yes, have_libusb=no) However, sdlchecks.cmake does this: pkg_check_modules(LIBUSB libusb) but it needs to be: pkg_check_modules(LIBUSB libusb-1.0)

7fa5e95b

2020-12-09T07:23:47

Fixed bug 5213 - Add support to metal in iOS/tvOS simulator Vincent Hamm Xcode11 and ios13 added support for metal simulator. Here is a quick and dirty patch to enable it. Pretty early and only tested on a few samples for now. Required mostly to enable metal support on correct version of ios, generate simulator compatible shaders and enforce buffer alignments on simulator (same as osx).

cb361896

2020-12-09T07:16:22

Fixed bug 5235 - All internal sources should include SDL_assert.h Ryan C. Gordon We should really stick this in SDL_internal.h or something so it's always available.

479db430

2020-12-09T06:56:34

Fixed bug 5250 - updaterev.sh failed using CMake Tools on VSCode Remote Sebastian Vargas Vargas Running CMake configure from a Windows Subsystem for Linux using Visual Studio Code Remote doesn't generate the header file with the current source revision, it throws "/home/sebva/SDL/build-scripts/updaterev.sh: 13: cannot create /mnt/c/Users/sebva/.vscode/extensions/ms-vscode-remote.remote-wsl-0.44.4/include/SDL_revision.h.new: Directory nonexistent".

88cb4962

2020-12-09T06:42:31

Fixed bug 5291 - SDL_SetRenderTarget unnecessarily changes target when current target is the native texture of the passed in texture

f2fff217

2020-12-09T06:24:40

Fixed bug 5374 - WGI: Use fast-pass strings. Joel Linn Eliminate additional heap allocation for short-lived HSTRINGs. Uses `WindowsCreateStringReference()` to disable reference counting and memory management by the Window Runtime.

42c5b4ac

2020-12-09T06:17:55

Fixed bug 5366 - cmake build doesn't detect Metal on macOS Tom Seddon 2nd time lucky, perhaps. patch 2 applies to current HEAD at time of writing - 4eb049c9bb1ca94efe3c40b57beda3169984d0cb from https://github.com/SDL-mirror/SDL. This basically goes back to what was there originally, but now manually adding "-x objective-c" to the clang command line rather than "-ObjC". clang is then invoked without the "-x c" that was causing the problem, the snippet builds, and Metal is detected. (I had a quick trawl through the cmake code, but I couldn't see where this is handled.) I was moved to try this after finding SDL's own CHECK_OBJC_SOURCE_COMPILES macro, and noting what it does: https://github.com/SDL-mirror/SDL/blob/4eb049c9bb1ca94efe3c40b57beda3169984d0cb/cmake/macros.cmake#L67 An alternative fix of course would be to use CHECK_OBJC_SOURCE_COMPILES instead of cmake's check_objc_source_compiles - but that had the same problem of getting confused by "return 0;". (Maybe that's because it's a macro? I'll defer to a cmake expert on this one.) I decided in the end to err on the side of leaving things looking basically the same as they were before my first patch.

475405e0

2020-12-09T12:03:24

CMakeLists.txt: sync DYLIB_CURRENT_VERSION to Xcode project

250a0557

2020-12-09T12:01:10

fix bug #5384 -- define DLL_EXPORT in DLL builds and adjust begin_code.h

50203d58

2020-12-08T22:00:06

Fixed bug 5329 - SDL_SetWindowGrab(SDL_FALSE) fails to unlock cursor if window is partially offscreen Ivan Mogilko With SDL 2.0.12 under MS Windows, if the window is partially offscreen calling SDL_SetWindowGrab(w, SDL_TRUE) works, but subsequent call to SDL_SetWindowGrab(w, SDL_FALSE) does not work. I tested this in both real program, and a small test app, where unlocking cursor worked perfectly while window is fully in desktop bounds, but did not work if it was at least few pixels outside. For the reference, following code is enough to reproduce the issue: #include <windows.h> #include <SDL.h> int WinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance, LPSTR lpCmdLine, int nShowCmd) { SDL_Init(SDL_INIT_VIDEO); SDL_Window* w = SDL_CreateWindow("", SDL_WINDOWPOS_CENTERED, SDL_WINDOWPOS_CENTERED, 640, 400, 0); bool grabbed = false; bool want_quit = false; while (!want_quit) { SDL_Event event; while (SDL_PollEvent(&event)) { switch (event.type) { case SDL_QUIT: want_quit = true; break; case SDL_KEYDOWN: if (event.key.keysym.scancode == SDL_SCANCODE_SPACE) { SDL_SetWindowGrab(w, static_cast<SDL_bool>(!grabbed)); grabbed = !grabbed; } } } } SDL_DestroyWindow(w); SDL_Quit(); return 0; }

43aad966

2020-12-08T19:03:50

Fixed bug 5222 - Crash when running with -DHIDAPI=ON Mathieu Eyraud SDL dynamically loads libusb but does not check the return value of 'SDL_LoadFunction'. Also libusb is loaded and initialized several time because 'SDL_hidapi_wasinit' is never set to true. I made a patch if you want to test: - check that 'hid_init' is called once and only once, - check return value of 'hid_init', - check return value of 'SDL_LoadFunction', - check return value of 'SDL_malloc', - add some debug logging.

a2098a47

2020-12-08T18:56:06

Updated SDL to 2.0.14 in preparation for release candidate

2a9591a9

2020-12-08T09:16:34

Accepted patch https://github.com/microsoft/vcpkg/blob/master/ports/sdl2/fix-space-in-path.patch

7f1c6e82

2020-12-08T09:13:08

Accepted patch https://github.com/microsoft/vcpkg/blob/master/ports/sdl2/enable-winrt-cmake.patch

7665f887

2020-12-08T09:07:21

Accepted patch https://github.com/microsoft/vcpkg/blob/master/ports/sdl2/disable-wcslcpy-and-wcslcat-for-windows.patch

695499ae

2020-12-08T09:04:28

Accepted patch https://github.com/microsoft/vcpkg/blob/master/ports/sdl2/disable-hidapi-for-uwp.patch

5610e5ae

2020-12-08T00:11:10

Makefile.os2: disable W303 (add -wcd=303 to CFLAGS) newer OpenWatcom versions enable W303 by default. without this, we get multiple "Parameter '%s' has been defined, but not referenced" warnings.

c9723c40

2020-12-07T09:38:21

Fixed potential hang in joystick close if the rumble thread is blocked for some reason It's still possible to hang when shutting down, if the rumble thread is still hung, but it won't block indefinitely at runtime.

3c68051e

2020-12-04T15:47:28

Allow background input when testing game controllers

09909d02

2020-12-03T19:44:47

Fixed handling of BACK button on newer Xbox One S controllers

54e5136b

2020-12-03T18:17:04

Refactored Xbox One Bluetooth protocol and verified Xbox One S, Xbox Series X, and Xbox One Elite Series 2 controllers

1031231b

2020-12-03T18:17:03

Fixed duplicating a device between XInput and HIDAPI

59f28b7f

2020-12-03T18:17:01

Fixed whitespace

f487d63a

2020-12-03T18:16:56

Fixed crash when printing NULL wide character string

754286c6

2020-12-02T13:45:24

SDL Renderer: specify the correct flag when recreating the window

035f8f23

2020-12-02T13:37:59

SDL_RecreateWindow: allow clearing VULKAN when recreating the window

93fbab0f

2020-12-02T11:04:53

SDL_ReCreateWindow: allow to unload METAL window and switch back to OpenGL. On older mac, where METAL Renderer METAL fails to create, it allows to switch back to OpenGL SDL_Renderer by re-creating the window (METAL flags was previously persistent).

7854f43b

2020-12-01T14:43:15

Disable SDL_JOYSTICK_HIDAPI on iOS and tvOS by default It's only needed for Steam Controller support, and introduces a Bluetooth framework dependency which requires additional permissions on the App Store.

ebf315e0

2020-12-01T14:01:12

Fixed bug 5369 - iOS static library build copies public headers files into xcode archive Dominik Reichardt Trying to integrate the latest SDL2 changes into our iOS project of Exult I've stumbled over the fact that when I added the static iOS library the public header files were copied to the archive of our project when you let Xcode build the archive. This makes the archive invalid for upload to the AppStore Connect. To fix this you need to delete the public headers from the build phase: Open the xcode project, select the target "Static Library-ios", got to build phases, and in "headers" delete all the headers in the "public" group. This is safe to do as this actually just copies the public headers for some odd counterintuitive reason. I think this needs to be done for all the library build targets but likely not for the framework targets.

4b35a18d

2020-12-01T13:50:42

Fixed bug 5366 - cmake build doesn't detect Metal on macOS Tom Seddon This is as of commit 50d804ea729accf9e3a9ce83238d0a2976a17545 from https://github.com/SDL-mirror/SDL, which is HEAD as I write (apologies, not confident with Mercurial) # Config macOS: 10.14.6 (18G6042) cmake --version: cmake version 3.16.20200101-g23e782c clang --version: Apple clang version 11.0.0 (clang-1100.0.33.17) Xcode version: Version 11.3.1 (11C504) # Repro steps Run the following commands in the shell. cd /tmp/ git clone https://github.com/SDL-mirror/SDL mkdir build.SDL cd build.SDL cmake -G ../SDL/ Examine cmake output. # Expected result Metal is detected. # Actual result It appears that Metal is not detected! Note this line in the summary: -- RENDER_METAL (Wanted: 0): OFF # Fix Change check_c_source_compiles to check_objc_source_compiles. The cmake script tries to add -ObjC to the clang command line, but, for whatever reason, this doesn't seem to work. Change the test source to have an empty main. The "return 0;" line seems to confuse cmake somehow, causing it to crap out with an error about HAVE_FRAMEWORK_METAL being an unknown argument. (Maybe I'm just dense, but it's not obvious to me what the problem is here.) With these two changes: -- RENDER_METAL (Wanted: ON): ON Patch attached.

798b2288

2020-12-01T13:46:34

Fixed bug 5367 - SDL_OpenUrl disabled on iOS due to unified Xcode project file Dominik Reichardt When you unified the Xcode project file you forgot to add the iOS file (/src/misc/ios/SDL_sysurl.m) to the project file, so the dummy in that folder takes over and the call does not work. Relevant commits: http://hg.libsdl.org/SDL/rev/c86bbf75f55e (SDL_OpenUrl enabled for macOS/iOS) http://hg.libsdl.org/SDL/rev/282c3dc1cf65 (and following: unified Xcode project files) Adding an ios group in the misc group of the project file and then adding /src/misc/ios/SDL_sysurl.m to it fixes the problem.

c78ca2d1

2020-12-01T13:38:42

Fixed bug 5371 - Rawinput: Fix truncating cast of string length. Joel Linn Fixes an implicit truncation of a string length on 64bit systems.

a3ccf9ad

2020-12-01T13:36:41

Fixed bug 5373 - [PATCH] Rawinput: Get correlated XInput battery info Joel Linn Currently the rawinput driver always reports a device as "wired". This changes that to "unknown" and updates it once the device is correlated with xinput.

e3966e25

2020-11-30T13:04:30

Use the correct internal API for updating the battery level for PS5 controllers

f4ed07de

2020-11-30T13:02:34

We don't know whether the PS5 controller is Bluetooth or not when we open it

04f0fd13

2020-11-27T18:57:42

Remember to close the game controller when we're done with it

1f2f536b

2020-11-27T18:57:40

Fixed XInput correlation for raw input controllers after hotplug events

012471e9

2020-11-27T18:57:38

Open and test all connected controllers

1c865c46

2020-11-27T18:57:36

Load the raw input device list at init time so it's available when DirectInput is doing device detection

a0c5bfa3

2020-11-27T13:08:40

Moved raw input event processing from the main thread to the joystick thread This allows fast joystick event delivery regardless of what the main thread is doing.

4fbefbe2

2020-11-27T11:33:53

Sort the raw input axes by usage, so X comes before Y, etc.

4ddac485

2020-11-27T11:33:51

Backed out minor optimization that prevented correlation_id from being set

8973a258

2020-11-27T10:44:56

Enable dispatching of WM_INPUT_DEVICE_CHANGE events directly, in case the application hasn't created a window with the normal message loop

e8adc648

2020-11-27T10:44:55

Enable dispatching of WM_INPUT events directly, in case the application hasn't created a window with the normal message loop

0252235e

2020-11-27T10:44:53

Recheck devices if another API queries raw input for a new device

a7dede7e

2020-11-27T10:44:51

Re-enable axis correlation for raw input controllers, for twin stick shooters that don't need face buttons

ce77966d

2020-11-27T10:44:49

Fixed RAWINPUT_IsDevicePresent() not returning TRUE for Xbox One controllers

8a449de2

2020-11-27T10:44:47

Fixed Xbox 360 wireless controller being picked up by WGI when it's being managed by RAWINPUT

37c9e4af

2020-11-27T06:03:15

Fixed processing WM_INPUT_DEVICE_CHANGE at startup

248fc75b

2020-11-27T05:53:56

Correlate just based on buttons, joystick axes are not as precise and could potentially cause incorrect uncorrelation. It's okay if the triggers aren't precise until someone presses a button on their controller.

e7e615de

2020-11-27T05:53:54

Removed extraneous windows message pumping Most of the raw input events are dispatched in the main windows message loop. We only dispatch device change messages separately when we need them to be completely up to date.

kc3-lang/SDL

Log