kmx git

Commit	Date	Message
9c698a25	2018-05-30T10:34:58	submodule: remove useless mask computations Previous to dfda2f68e (submodule: remove the per-repo cache, 2015-04-27), we tried to cache our submodules per repository to avoid having to reload it too frequently. As it created some headaches with regards to multithreading, we removed that cache. Previous to that removal, we had to compute what submodule status to refresh. The mask computation was not removed, though, resulting in confusing and actually dead code. While it seems like the mask is currently in use in a conditional, it is not, as we unconditionally assign to the mask previous to that condition. Remove all mask computations to clean up stale code.
b2a389c8	2018-05-30T08:35:06	submodule: detect duplicated submodule paths When loading submodule names, we build a map of submodule paths and their respective names. While looping over the configuration keys, we do not check though whether a submodule path was seen already. This leads to a memory leak in case we have multiple submodules with the same path, as we just overwrite the old value in the map in that case. Fix the error by verifying that the path to be added is not yet part of the string map. Git does not allow to have multiple submodules for a path anyway, so we now do the same and detect this duplication, reporting it to the user.
cf5030a3	2018-05-30T08:38:28	submodule: refactor loading submodule names The function `load_submodule_names` was always being called with a newly allocated string map, which was then getting filled by the function. Move the string map allocation into `load_submodule_names`, instead, and pass the whole map back to the caller in case no error occurs. This change helps to avoid misuse by handing in pre-populated maps.
9e723db8	2018-05-24T20:28:36	submodule: plug leaks from the escape detection
c16ebaa6	2018-05-24T19:05:59	submodule: replace index with strchr which exists on Windows
91a4849d	2018-05-24T19:00:13	submodule: the repostiory for _name_is_valid should not be const We might modify caches due to us trying to load the configuration to figure out what kinds of filesystem protections we should have.
a7168b47	2018-05-22T16:13:47	path: reject .gitmodules as a symlink Any part of the library which asks the question can pass in the mode to have it checked against `.gitmodules` being a symlink. This is particularly relevant for adding entries to the index from the worktree and for checking out files.
397abe98	2018-05-14T16:03:15	submodule: also validate Windows-separated paths for validity Otherwise we would also admit `..\..\foo\bar` as a valid path and fail to protect Windows users. Ideally we would check for both separators without the need for the copied string, but this'll get us over the RCE.
6b15ceac	2018-04-30T13:47:15	submodule: ignore submodules which include path traversal in their name If the we decide that the "name" of the submodule (i.e. its path inside `.git/modules/`) is trying to escape that directory or otherwise trick us, we ignore the configuration for that submodule. This leaves us with a half-configured submodule when looking it up by path, but it's the same result as if the configuration really were missing. The name check is potentially more strict than it needs to be, but it lets us re-use the check we're doing for the checkout. The function that encapsulates this logic is ready to be exported but we don't want to do that in a security release so it remains internal for now.
286a6765	2018-04-17T14:32:56	Merge pull request #4522 from csware/submodules-should-report-parse-errors Submodules-API should report .gitmodules parse errors instead of ignoring them
69a282da	2018-03-28T06:48:55	submodule: add more robust error handling when a submodule path is found on add
e55b5373	2018-02-08T12:36:47	Submodule API should report .gitmodules parse errors Signed-off-by: Sven Strickroth <email@cs-ware.de>
c07abd65	2018-03-27T07:37:34	submodule: add better error handling to is_path_occupied
b282ca79	2018-01-06T10:57:32	submodule: change can_add_submodule to is_path_occupied
ef9a7749	2017-11-19T20:59:59	submodule: update index check to check path before directory and fix tests
9371149f	2017-10-20T14:24:01	submodule: fix styling errors
ad1c4350	2017-10-16T15:30:47	submodule: check index for prefix before adding submodule submodule: check path and prefix before adding submodule submodule: fix test errors
529e873c	2017-05-23T11:51:00	config: pass repository when opening config files Our current configuration logic is completely oblivious of any repository, but only cares for actual file paths. Unfortunately, we are forced to break this assumption by the introduction of conditional includes, which are evaluated in the context of a repository. Right now, only one conditional exists with "gitdir:" -- it will only include the configuration if the current repository's git directory matches the value passed to "gitdir:". To support these conditionals, we have to break our API and make the repository available when opening a configuration file. This commit extends the `open` call of configuration backends to include another repository and adjusts existing code to have it available. This includes the user-visible functions `git_config_add_file_ondisk` and `git_config_add_backend`.
477b3e04	2017-07-10T12:25:43	submodule: refuse lookup in bare repositories While it is technically possible to look up submodules inside of a bare repository by reading the submodule configuration of a specific commit, we do not offer this functionality right now. As such, calling both `git_submodule_lookup` and `git_submodule_foreach` should error out early when these functions encounter a bare repository. While `git_submodule_lookup` already does return an error due to not being able to parse the configuration, `git_submodule_foreach` simply returns success and never invokes the callback function. Fix the issue by having both functions check whether the repository is bare and returning an error in that case.
0c7f49dd	2017-06-30T13:39:01	Make sure to always include "common.h" first Next to including several files, our "common.h" header also declares various macros which are then used throughout the project. As such, we have to make sure to always include this file first in all implementation files. Otherwise, we might encounter problems or even silent behavioural differences due to macros or defines not being defined as they should be. So in fact, our header and implementation files should make sure to always include "common.h" first. This commit does so by establishing a common include pattern. Header files inside of "src" will now always include "common.h" as its first other file, separated by a newline from all the other includes to make it stand out as special. There are two cases for the implementation files. If they do have a matching header file, they will always include this one first, leading to "common.h" being transitively included as first file. If they do not have a matching header file, they instead include "common.h" as first file themselves. This fixes the outlined problems and will become our standard practice for header and source files inside of the "src/" from now on.
f623cf89	2017-03-22T20:32:55	Merge pull request #4163 from pks-t/pks/submodules-with-worktrees Worktree fixes
b0c9bc92	2017-03-15T13:38:54	submodule: resolve URLs relative to main worktree It is possible to specify submodule URLs relative to the repository location. E.g. having a submodule with URL "../submodule" will look for the submodule at "repo/../submodule". With the introduction of worktrees, though, we cannot simply resolve the URL relative to the repository location itself. If the repository for which a URL is to be resolved is a working tree, we have to resolve the URL relative to the parent's repository path. Otherwise, the URL would change depending on where the working tree is located. Fix this by special-casing when we have a working tree while getting the URL base.
32ecc98e	2017-03-14T14:53:32	submodule: catch when submodule is not staged on update When calling `git_submodule_update` on a submodule, we have to retrieve the ID of the submodule entry in the index. If the function is called on a submodule which is only partly initialized, the submodule entry may not be added to the index yet. This leads to an assert when trying to look up the blob later on. Fix the issue by checking if the index actually holds the submodule's ID and erroring out if it does not.
73028af8	2017-01-27T14:20:24	khash: avoid using macro magic to get return address
f31cb45a	2017-01-25T15:31:12	khash: avoid using `kh_put` directly
63e914cb	2017-01-25T14:05:24	khash: avoid using `kh_size` directly
c5f3da96	2016-11-11T14:36:43	repository: use `git_repository_item_path` The recent introduction of the commondir variable of a repository requires callers to distinguish whether their files are part of the dot-git directory or the common directory shared between multpile worktrees. In order to take the burden from callers and unify knowledge on which files reside where, the `git_repository_item_path` function has been introduced which encapsulate this knowledge. Modify most existing callers of `git_repository_path` to use `git_repository_item_path` instead, thus making them implicitly aware of the common directory.
d0c418c0	2017-01-27T12:49:48	Fix uninitialized variable warning Fix the following warning emitted by clang: [ 16%] Building C object CMakeFiles/libgit2_clar.dir/src/submodule.c.o /Users/mplough/devel/external/libgit2/src/submodule.c:408:6: warning: variable 'i' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] if ((error = load_submodule_names(names, cfg))) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /Users/mplough/devel/external/libgit2/src/submodule.c:448:20: note: uninitialized use occurs here git_iterator_free(i); ^ /Users/mplough/devel/external/libgit2/src/submodule.c:408:2: note: remove the 'if' if its condition is always false if ((error = load_submodule_names(names, cfg))) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /Users/mplough/devel/external/libgit2/src/submodule.c:404:17: note: initialize the variable 'i' to silence this warning git_iterator *i; ^ = NULL 1 warning generated.
60c2bf47	2017-01-22T00:58:41	submodule: only examine idx & head given a config
0fbff82b	2017-01-22T00:30:02	submodule: don't double free during load failure When we fail to load submodules, don't free the list; it is later freed unconditionally.
e2b3dc16	2017-01-23T13:29:47	variable 'i' is used uninitialized whenever 'if' condition is true
9e78b727	2017-01-21T22:39:59	Merge branch 'master' into pr/3938
673dff88	2016-11-23T18:32:55	Skip submodule head/index update when caching. `git_submodule_status` is very slow, bottlenecked on `git_repository_head_tree`, which it uses through `submodule_update_head`. If the user has requested submodule caching, assume that they want this status cached too and skip it. Signed-off-by: David Turner <dturner@twosigma.com>
4d99c4cf	2016-11-23T18:32:48	Allow for caching of submodules. Added `git_repository_submodule_cache_all` to initialze a cache of submodules on the repository so that operations looking up N submodules are O(N) and not O(N^2). Added a `git_repository_submodule_cache_clear` function to remove the cache. Also optimized the function that loads all submodules as it was itself O(N^2) w.r.t the number of submodules, having to loop through the `.gitmodules` file once per submodule. I changed it to process the `.gitmodules` file once, into a map. Signed-off-by: David Turner <dturner@twosigma.com>
ca05857e	2016-11-23T18:26:19	Fix formatting Signed-off-by: David Turner <dturner@twosigma.com>
909d5494	2016-12-29T12:25:15	giterr_set: consistent error messages Error messages should be sentence fragments, and therefore: 1. Should not begin with a capital letter, 2. Should not conclude with punctuation, and 3. Should not end a sentence and begin a new one
ba3a8304	2016-10-10T09:38:21	Remove set of submodule update `checkout_strategy` Remove overriding the `checkout_strategy` for `update_options` when performing an update on a submodule. Users should be specifying the correct checkout strategy in `update_options.checkout_opts.checkout_strategy`.
567fd782	2016-09-26T19:32:15	Remove `clone_checkout_strategy` in submodule update opts Remove `clone_checkout_strategy` in `git_submodule_update_options` as per issue #3784.
de43efcf	2016-06-28T16:07:25	submodule: Try to fetch when update fails to find the target commit in the submodule.
60a194aa	2016-03-20T11:00:12	tree: re-use the id and filename in the odb object Instead of copying over the data into the individual entries, point to the originals, which are already in a format we can use.
486302d6	2016-03-01T19:11:33	submodule: avoid passing NULL pointers to strncmp In C89 it is undefined behavior to pass `NULL` pointers to `strncmp` and later on in C99 it has been explicitly stated that functions with an argument declared as `size_t nmemb` specifying the array length shall always have valid parameters, no matter if `nmemb` is 0 or not (see ISO 9899 §7.21.1.2). The function `str_equal_no_trailing_slash` always passes its parameters to `strncmp` if their lengths match. This means if one parameter is `NULL` and the other one either `NULL` or a string with length 0 we will pass the pointers to `strncmp` and cause undefined behavior. Fix this by explicitly handling the case when both lengths are 0.
5663d4f6	2016-02-18T12:31:56	Merge pull request #3613 from ethomson/fixups Remove most of the silly warnings
3b2fa0fb	2016-02-12T10:25:50	submodule: explicitly cast to the teensy time value
3679ebae	2016-02-11T23:37:52	Horrible fix for #3173.
eda726cf	2015-12-08T11:34:00	Use a typedef for the submodule_foreach callback. This fits with the style for the rest of the project, but more importantly, makes life easier for bindings authors who auto-generate code.
f4b02671	2015-11-04T16:17:51	submodule: reload HEAD/index after reading config Reload the HEAD and index data for a submodule after reading the configuration. The configuration may specify a `path`, so we must update HEAD and index data with that path in mind.
5c5df666	2015-09-27T23:32:20	Plug some leaks
ab8f2c66	2015-09-23T15:09:19	submodule: plug a few leaks
f17525b0	2015-08-10T18:36:27	submodule: refactor to be more explicit in the search When searching for information about a submdoule, let's be more explicit in what we expect to find. We currently insert a submodule into the map and change certain parameters when the config callback gets called. Switch to asking for the configuration we're interested in, rather than taking it in an arbitrary order.
ed1c6446	2015-07-28T11:41:27	iterator: use an options struct instead of args
2dfd5eae	2015-07-24T15:05:16	Merge pull request #3307 from libgit2/cmn/submodule-backslash Normalize submodule urls before looking at them
a58854a0	2015-07-13T17:11:19	submodule, path: extract slash conversion Extract the backslash-to-slash conversion into a helper function.
f00f005b	2015-07-13T09:08:32	submodule: normalize slashes in resolve_url Our path functions expect to work with slashes, so convert a path with backslashes into one with slashes at the top of the function.
08c2d3e9	2015-07-11T18:31:28	submodule: lookup the submodule by path if available If we get the path from the gitmodules file, look up the submodule we're interested in by path, rather then by name. Otherwise we might get duplicate results.
e0af3cb3	2015-07-01T21:15:06	submodule: correctly delimit the keys to use for lookup The regex we use to look at the gitmodules file does not correctly delimit the name of submodule which we want to look up and puts '.*' straight after the name, maching on any submodule which has the seeked submodule as a prefix of its name. Add the missing '\.' in the regex so we want a full stop to exist both before and after the submodule name.
7bfdd1c2	2015-06-30T10:21:06	Merge pull request #3270 from ethomson/warnings2 Remove some warnings
60655056	2015-06-29T21:37:07	submodule: cast enum to int for compare
c28a5c97	2015-06-29T21:10:47	submodule: remove trailing slashes from submodule paths We allow looking up a submodule by path, but we lost the path normalisation during the recent changes. Bring it back.
cf4030b0	2015-06-29T20:54:17	submodule: remove some obsolete logic Remove some of the logic that was left-over from the time we had a cache of submodules, plugging a leak of the submodule object in certain cases.
c2418f46	2015-06-25T12:48:44	Rename FALLBACK to UNSPECIFIED Fallback describes the mechanism, while unspecified explains what the user is thinking.
c4e3a3db	2015-05-09T11:22:57	submodule: handle writing out all enum values for settings We currently do not handle those enum values which require us to set "true" or unset variables in all cases. Use a common function which does understand this by looking at our mapping directly.
961861fa	2015-05-05T09:25:17	submodule: get rid of `_save()` We no longer have any setters which affect an instance, so `git_submodule_save()` is no longer relevant.
d6073b30	2015-05-05T09:22:35	submodule: make `_set_url()` affect the configuration With this one, we can get rid of the edit_and_save test.
486ba4cd	2015-05-05T09:13:52	submodule: make `_set_branch()` affect the configuration
4e636423	2015-05-05T09:01:20	submodule: make `_set_update_fetch_recurse_submodules()` affect the config Similarly to the other ones. In this test we copy over testing `RECURSE_YES` which shows an error in our handling of the `YES` variant which we may have to port to the rest.
e8a39f8e	2015-05-05T08:35:29	submodule: make `_set_update()` affect the configuration Moving on with the removal of runtime-changing variables, the update setting for a remote is whatever it was when it was looked up.
2278637c	2015-05-05T06:14:40	submodule: correct detection of existing submodules During the cache deletion, the check for whether we consider a submodule to exist got changed regarding submodules which are in the worktree but not configured. Instead of checking for the url field to be populated, check the location where we've found it.
d769a3fd	2015-05-05T06:03:21	submodule: bring back finding by path During the removal of the cache, we also removed the ability to use `_lookup()` to search by path rather than name. Bring this logic back.
c6f489c9	2015-05-04T17:29:12	submodule: add an ignore option to status This lets us specify in the status call which ignore rules we want to use (optionally falling back to whatever the submodule has in its configuration). This removes one of the reasons for having `_set_ignore()` set the value in-memory. We re-use the `IGNORE_RESET` value for this as it is no longer relevant but has a similar purpose to `IGNORE_FALLBACK`. Similarly, we remove `IGNORE_DEFAULT` which does not have use outside of initializers and move that to fall back to the configuration as well.
64bbd47a	2015-05-04T17:09:21	submodule: don't let status change an existing instance As submodules are becomes more like values, we should not let a status check to update its properties. Instead of taking a submodule, have status take a repo and submodule name.
5a9fc6c8	2015-05-04T16:22:56	submodule: make set_ignore() affect the configuration Instead of affecting a particular instance, make it change the configuration.
dfda2f68	2015-04-27T19:27:29	submodule: remove the per-repo cache Having this cache and giving them out goes against our multithreading guarantees and it makes it impossible to use submodules in a multi-threaded environment, as any thread can ask for a refresh which may reallocate some string in the submodule struct which we've accessed in a different one via a getter. This makes the submodules behave more like remotes, where each object is created upon request and not shared except explicitly by the user. This means that some tests won't pass yet, as they assume they can affect the submodule objects in the cache and that will affect later operations.
624c949f	2015-06-20T16:17:28	index: make relative comparison use the checksum as well This is used by the submodule in order to figure out if the index has changed since it last read it. Using a timestamp is racy, so let's make it use the checksum, just like we now do for reloading the index itself.
8f0104ec	2015-04-21T22:10:36	Remove the callbacks struct from the remote Having the setting be different from calling its actions was not a great idea and made for the sake of the wrong convenience. Instead of that, accept either fetch options, push options or the callbacks when dealing with the remote. The fetch options are currently only the callbacks, but more options will be moved from setters and getters on the remote to the options. This does mean passing the same struct along the different functions but the typical use-case will only call git_remote_fetch() or git_remote_push() and so won't notice much difference.
129788a6	2015-03-18T11:45:18	Implement git_submodule_set_branch.
e6903ea2	2015-03-12T16:05:07	Fix git_submodule_sync writing URL to wrong key. Currently git_submodule_sync writes the submodule's URL to the key 'branch.<REMOTE_NAME>.remote' while the reference implementation of `git submodule sync` writes to 'remote.<REMOTE_NAME>.url', which is the intended behavior according to git-submodule(1).
4e498646	2015-01-15T16:50:31	repository: remove log message override for switching the active branch We want to use the "checkout: moving from ..." message in order to let git know when a change of branch has happened. Make the convenience functions for this goal write this message.
659cf202	2015-01-07T12:23:05	Remove the signature from ref-modifying functions The signature for the reflog is not something which changes dynamically. Almost all uses will be NULL, since we want for the repository's default identity to be used, making it noise. In order to allow for changing the identity, we instead provide git_repository_set_ident() and git_repository_ident() which allow a user to override the choice of signature.
c8e02b87	2015-02-15T21:07:05	Remove extra semicolon outside of a function Without this change, compiling with gcc and pedantic generates warning: ISO C does not allow extra ‘;’ outside of a function.
c868981f	2015-01-06T13:49:39	Add extern function to initialize submodule update options.
5018e2c6	2015-01-06T17:08:38	submodule: declare vars at top of func block
9d1f97df	2014-10-29T17:49:04	Introduce a convenience function for submodule update This introduces the functionality of submodule update in 'git_submodule_do_update'. The existing 'git_submodule_update' function is renamed to 'git_submodule_update_strategy'. The 'git_submodule_update' function now refers to functionality similar to `git submodule update`, while `git_submodule_update_strategy` is used to get the configured value of submodule.<name>.update.
b2ab887e	2014-10-20T18:07:32	submodule init should resolve relative url paths Submodule init should handle relative paths in .gitmodules files and resolve these urls when updating the git config file.
209425ce	2014-11-08T13:25:51	remote: rename _load() to _lookup() This brings it in line with the rest of the lookup functions.
bc737620	2014-08-20T10:24:41	Introduce option to use relative paths for repository work directory Teach git_repository_init_ext to use relative paths for the gitlink to the work directory. This is used when creating a sub repository where the sub repository resides in the parent repository's .git directory.
1e4976cb	2014-05-08T10:17:14	Be more careful with user-supplied buffers This adds in missing calls to `git_buf_sanitize` and fixes a number of places where `git_buf` APIs could inadvertently write NUL terminator bytes into invalid buffers. This also changes the behavior of `git_buf_sanitize` to NUL terminate a buffer if it can and of `git_buf_shorten` to do nothing if it can. Adds tests of filtering code with zeroed (i.e. unsanitized) buffer which was previously triggering a segfault.
7d490872	2014-04-10T22:31:01	Attribute file cache refactor This is a big refactoring of the attribute file cache to be a bit simpler which in turn makes it easier to enforce a lock around any updates to the cache so that it can be used in a threaded env. Tons of changes to the attributes and ignores code.
40ed4990	2014-02-11T14:45:37	Add diff threading tests and attr file cache locks This adds a basic test of doing simultaneous diffs on multiple threads and adds basic locking for the attr file cache because that was the immediate problem that arose from these tests.
eedeeb9e	2014-04-03T11:58:51	Test (and fix) the git_submodule_sync changes I wrote this stuff a while ago and forgot to write tests. Wanted to do so now to wrap up the PR and immediately found problems.
18cc7d28	2014-04-03T11:29:08	Minor code cleanup
f2fb4bac	2014-04-02T23:55:21	git_submodule_resolve_url supports relative urls The base for the relative urls is determined as follows, with descending priority: - remote url of HEAD's remote tracking branch - remote "origin" - workdir This follows git.git behaviour
4ece3e22	2014-04-01T12:19:11	Fix submodule accounting for name and path changes Wrote tests that try adding, removing, and updating the name of submodules which showed a number of problems with how we account for changes when incrementally updating the submodule info. Most of these issues didn't exist before because reloading would always blow away the old submodule data.
aa78c9ba	2014-04-01T10:22:51	Minor submodule cache locking improvements This improvement the management of the lock around submodule cache updates slightly, using the lock to make sure that foreach can safely make a snapshot of all existing submodules and making sure that git_submodule_add_setup also grabs a lock before inserting the new submodule. Cache initialization / refresh should already have been holding the lock correctly as it adds submodules.
eeeb9654	2014-03-30T15:35:56	Reinstate efficient submodule reloading This makes it so that git_submodule_reload_all will actually only reload changed items unless the `force` flag is used.
a4ccd2b0	2014-03-29T15:23:01	Use enums instead of bools for submodule options When forcing cache flushes or reload, etc., it is easier to keep track of intent using enums instead of plain bools. Also, this fixes a bug where the cache was not being properly refreshes by a git_submodule_reload_all.
db0e7878	2014-03-28T16:50:49	Make submodule refresh a bit smarter This makes submodule cache refresh actually look at the timestamps from the data sources for submodules and reload as needed if they have changed since the last refresh.
69b6ffc4	2014-03-28T14:02:21	Make a real submodule cache object This takes the old submodule cache which was just a git_strmap and makes a real git_submodule_cache object that can contain other things like a lock and timestamp-ish data to control refreshing of submodule info.
e402d2f1	2014-03-24T11:25:59	Submodule sync refactoring Turns out there was already a helper to do what I wanted to do, so I just made it so that I could use it for sync and switched to that instead.
8286300a	2013-12-18T11:48:57	Fix git_submodule_sync and add new config helper This fixes `git_submodule_sync` to correctly update the remote URL of the default branch of the submodule along with the URL in the parent repository config (i.e. match core Git's behavior). Also move some useful helper logic from the submodule code into a shared config API `git_config__update_entry` that can either set or delete an entry with constraints like not overwriting or not creating a new entry. I used that helper to update a couple other places in the code.
18234b14	2014-02-21T09:14:16	Add efficient git_buf join3 API There are a few places where we need to join three strings to assemble a path. This adds a simple join3 function to avoid the comparatively expensive join_n (which calls strlen on each string twice).

9c698a25

2018-05-30T10:34:58

submodule: remove useless mask computations Previous to dfda2f68e (submodule: remove the per-repo cache, 2015-04-27), we tried to cache our submodules per repository to avoid having to reload it too frequently. As it created some headaches with regards to multithreading, we removed that cache. Previous to that removal, we had to compute what submodule status to refresh. The mask computation was not removed, though, resulting in confusing and actually dead code. While it seems like the mask is currently in use in a conditional, it is not, as we unconditionally assign to the mask previous to that condition. Remove all mask computations to clean up stale code.

b2a389c8

2018-05-30T08:35:06

submodule: detect duplicated submodule paths When loading submodule names, we build a map of submodule paths and their respective names. While looping over the configuration keys, we do not check though whether a submodule path was seen already. This leads to a memory leak in case we have multiple submodules with the same path, as we just overwrite the old value in the map in that case. Fix the error by verifying that the path to be added is not yet part of the string map. Git does not allow to have multiple submodules for a path anyway, so we now do the same and detect this duplication, reporting it to the user.

cf5030a3

2018-05-30T08:38:28

submodule: refactor loading submodule names The function `load_submodule_names` was always being called with a newly allocated string map, which was then getting filled by the function. Move the string map allocation into `load_submodule_names`, instead, and pass the whole map back to the caller in case no error occurs. This change helps to avoid misuse by handing in pre-populated maps.

9e723db8

2018-05-24T20:28:36

submodule: plug leaks from the escape detection

c16ebaa6

2018-05-24T19:05:59

submodule: replace index with strchr which exists on Windows

91a4849d

2018-05-24T19:00:13

submodule: the repostiory for _name_is_valid should not be const We might modify caches due to us trying to load the configuration to figure out what kinds of filesystem protections we should have.

a7168b47

2018-05-22T16:13:47

path: reject .gitmodules as a symlink Any part of the library which asks the question can pass in the mode to have it checked against `.gitmodules` being a symlink. This is particularly relevant for adding entries to the index from the worktree and for checking out files.

397abe98

2018-05-14T16:03:15

submodule: also validate Windows-separated paths for validity Otherwise we would also admit `..\..\foo\bar` as a valid path and fail to protect Windows users. Ideally we would check for both separators without the need for the copied string, but this'll get us over the RCE.

6b15ceac

2018-04-30T13:47:15

submodule: ignore submodules which include path traversal in their name If the we decide that the "name" of the submodule (i.e. its path inside `.git/modules/`) is trying to escape that directory or otherwise trick us, we ignore the configuration for that submodule. This leaves us with a half-configured submodule when looking it up by path, but it's the same result as if the configuration really were missing. The name check is potentially more strict than it needs to be, but it lets us re-use the check we're doing for the checkout. The function that encapsulates this logic is ready to be exported but we don't want to do that in a security release so it remains internal for now.

286a6765

2018-04-17T14:32:56

Merge pull request #4522 from csware/submodules-should-report-parse-errors Submodules-API should report .gitmodules parse errors instead of ignoring them

69a282da

2018-03-28T06:48:55

submodule: add more robust error handling when a submodule path is found on add

e55b5373

2018-02-08T12:36:47

Submodule API should report .gitmodules parse errors Signed-off-by: Sven Strickroth <email@cs-ware.de>

c07abd65

2018-03-27T07:37:34

submodule: add better error handling to is_path_occupied

b282ca79

2018-01-06T10:57:32

submodule: change can_add_submodule to is_path_occupied

ef9a7749

2017-11-19T20:59:59

submodule: update index check to check path before directory and fix tests

9371149f

2017-10-20T14:24:01

submodule: fix styling errors

ad1c4350

2017-10-16T15:30:47

submodule: check index for prefix before adding submodule submodule: check path and prefix before adding submodule submodule: fix test errors

529e873c

2017-05-23T11:51:00

config: pass repository when opening config files Our current configuration logic is completely oblivious of any repository, but only cares for actual file paths. Unfortunately, we are forced to break this assumption by the introduction of conditional includes, which are evaluated in the context of a repository. Right now, only one conditional exists with "gitdir:" -- it will only include the configuration if the current repository's git directory matches the value passed to "gitdir:". To support these conditionals, we have to break our API and make the repository available when opening a configuration file. This commit extends the `open` call of configuration backends to include another repository and adjusts existing code to have it available. This includes the user-visible functions `git_config_add_file_ondisk` and `git_config_add_backend`.

477b3e04

2017-07-10T12:25:43

submodule: refuse lookup in bare repositories While it is technically possible to look up submodules inside of a bare repository by reading the submodule configuration of a specific commit, we do not offer this functionality right now. As such, calling both `git_submodule_lookup` and `git_submodule_foreach` should error out early when these functions encounter a bare repository. While `git_submodule_lookup` already does return an error due to not being able to parse the configuration, `git_submodule_foreach` simply returns success and never invokes the callback function. Fix the issue by having both functions check whether the repository is bare and returning an error in that case.

0c7f49dd

2017-06-30T13:39:01

Make sure to always include "common.h" first Next to including several files, our "common.h" header also declares various macros which are then used throughout the project. As such, we have to make sure to always include this file first in all implementation files. Otherwise, we might encounter problems or even silent behavioural differences due to macros or defines not being defined as they should be. So in fact, our header and implementation files should make sure to always include "common.h" first. This commit does so by establishing a common include pattern. Header files inside of "src" will now always include "common.h" as its first other file, separated by a newline from all the other includes to make it stand out as special. There are two cases for the implementation files. If they do have a matching header file, they will always include this one first, leading to "common.h" being transitively included as first file. If they do not have a matching header file, they instead include "common.h" as first file themselves. This fixes the outlined problems and will become our standard practice for header and source files inside of the "src/" from now on.

f623cf89

2017-03-22T20:32:55

Merge pull request #4163 from pks-t/pks/submodules-with-worktrees Worktree fixes

b0c9bc92

2017-03-15T13:38:54

submodule: resolve URLs relative to main worktree It is possible to specify submodule URLs relative to the repository location. E.g. having a submodule with URL "../submodule" will look for the submodule at "repo/../submodule". With the introduction of worktrees, though, we cannot simply resolve the URL relative to the repository location itself. If the repository for which a URL is to be resolved is a working tree, we have to resolve the URL relative to the parent's repository path. Otherwise, the URL would change depending on where the working tree is located. Fix this by special-casing when we have a working tree while getting the URL base.

32ecc98e

2017-03-14T14:53:32

submodule: catch when submodule is not staged on update When calling `git_submodule_update` on a submodule, we have to retrieve the ID of the submodule entry in the index. If the function is called on a submodule which is only partly initialized, the submodule entry may not be added to the index yet. This leads to an assert when trying to look up the blob later on. Fix the issue by checking if the index actually holds the submodule's ID and erroring out if it does not.

73028af8

2017-01-27T14:20:24

khash: avoid using macro magic to get return address

f31cb45a

2017-01-25T15:31:12

khash: avoid using `kh_put` directly

63e914cb

2017-01-25T14:05:24

khash: avoid using `kh_size` directly

c5f3da96

2016-11-11T14:36:43

repository: use `git_repository_item_path` The recent introduction of the commondir variable of a repository requires callers to distinguish whether their files are part of the dot-git directory or the common directory shared between multpile worktrees. In order to take the burden from callers and unify knowledge on which files reside where, the `git_repository_item_path` function has been introduced which encapsulate this knowledge. Modify most existing callers of `git_repository_path` to use `git_repository_item_path` instead, thus making them implicitly aware of the common directory.

d0c418c0

2017-01-27T12:49:48

Fix uninitialized variable warning Fix the following warning emitted by clang: [ 16%] Building C object CMakeFiles/libgit2_clar.dir/src/submodule.c.o /Users/mplough/devel/external/libgit2/src/submodule.c:408:6: warning: variable 'i' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] if ((error = load_submodule_names(names, cfg))) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /Users/mplough/devel/external/libgit2/src/submodule.c:448:20: note: uninitialized use occurs here git_iterator_free(i); ^ /Users/mplough/devel/external/libgit2/src/submodule.c:408:2: note: remove the 'if' if its condition is always false if ((error = load_submodule_names(names, cfg))) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /Users/mplough/devel/external/libgit2/src/submodule.c:404:17: note: initialize the variable 'i' to silence this warning git_iterator *i; ^ = NULL 1 warning generated.

60c2bf47

2017-01-22T00:58:41

submodule: only examine idx & head given a config

0fbff82b

2017-01-22T00:30:02

submodule: don't double free during load failure When we fail to load submodules, don't free the list; it is later freed unconditionally.

e2b3dc16

2017-01-23T13:29:47

variable 'i' is used uninitialized whenever 'if' condition is true

9e78b727

2017-01-21T22:39:59

Merge branch 'master' into pr/3938

673dff88

2016-11-23T18:32:55

Skip submodule head/index update when caching. `git_submodule_status` is very slow, bottlenecked on `git_repository_head_tree`, which it uses through `submodule_update_head`. If the user has requested submodule caching, assume that they want this status cached too and skip it. Signed-off-by: David Turner <dturner@twosigma.com>

4d99c4cf

2016-11-23T18:32:48

Allow for caching of submodules. Added `git_repository_submodule_cache_all` to initialze a cache of submodules on the repository so that operations looking up N submodules are O(N) and not O(N^2). Added a `git_repository_submodule_cache_clear` function to remove the cache. Also optimized the function that loads all submodules as it was itself O(N^2) w.r.t the number of submodules, having to loop through the `.gitmodules` file once per submodule. I changed it to process the `.gitmodules` file once, into a map. Signed-off-by: David Turner <dturner@twosigma.com>

ca05857e

2016-11-23T18:26:19

Fix formatting Signed-off-by: David Turner <dturner@twosigma.com>

909d5494

2016-12-29T12:25:15

giterr_set: consistent error messages Error messages should be sentence fragments, and therefore: 1. Should not begin with a capital letter, 2. Should not conclude with punctuation, and 3. Should not end a sentence and begin a new one

ba3a8304

2016-10-10T09:38:21

Remove set of submodule update `checkout_strategy` Remove overriding the `checkout_strategy` for `update_options` when performing an update on a submodule. Users should be specifying the correct checkout strategy in `update_options.checkout_opts.checkout_strategy`.

567fd782

2016-09-26T19:32:15

Remove `clone_checkout_strategy` in submodule update opts Remove `clone_checkout_strategy` in `git_submodule_update_options` as per issue #3784.

de43efcf

2016-06-28T16:07:25

submodule: Try to fetch when update fails to find the target commit in the submodule.

60a194aa

2016-03-20T11:00:12

tree: re-use the id and filename in the odb object Instead of copying over the data into the individual entries, point to the originals, which are already in a format we can use.

486302d6

2016-03-01T19:11:33

submodule: avoid passing NULL pointers to strncmp In C89 it is undefined behavior to pass `NULL` pointers to `strncmp` and later on in C99 it has been explicitly stated that functions with an argument declared as `size_t nmemb` specifying the array length shall always have valid parameters, no matter if `nmemb` is 0 or not (see ISO 9899 §7.21.1.2). The function `str_equal_no_trailing_slash` always passes its parameters to `strncmp` if their lengths match. This means if one parameter is `NULL` and the other one either `NULL` or a string with length 0 we will pass the pointers to `strncmp` and cause undefined behavior. Fix this by explicitly handling the case when both lengths are 0.

5663d4f6

2016-02-18T12:31:56

Merge pull request #3613 from ethomson/fixups Remove most of the silly warnings

3b2fa0fb

2016-02-12T10:25:50

submodule: explicitly cast to the teensy time value

3679ebae

2016-02-11T23:37:52

Horrible fix for #3173.

eda726cf

2015-12-08T11:34:00

Use a typedef for the submodule_foreach callback. This fits with the style for the rest of the project, but more importantly, makes life easier for bindings authors who auto-generate code.

f4b02671

2015-11-04T16:17:51

submodule: reload HEAD/index after reading config Reload the HEAD and index data for a submodule after reading the configuration. The configuration may specify a `path`, so we must update HEAD and index data with that path in mind.

5c5df666

2015-09-27T23:32:20

Plug some leaks

ab8f2c66

2015-09-23T15:09:19

submodule: plug a few leaks

f17525b0

2015-08-10T18:36:27

submodule: refactor to be more explicit in the search When searching for information about a submdoule, let's be more explicit in what we expect to find. We currently insert a submodule into the map and change certain parameters when the config callback gets called. Switch to asking for the configuration we're interested in, rather than taking it in an arbitrary order.

ed1c6446

2015-07-28T11:41:27

iterator: use an options struct instead of args

2dfd5eae

2015-07-24T15:05:16

Merge pull request #3307 from libgit2/cmn/submodule-backslash Normalize submodule urls before looking at them

a58854a0

2015-07-13T17:11:19

submodule, path: extract slash conversion Extract the backslash-to-slash conversion into a helper function.

f00f005b

2015-07-13T09:08:32

submodule: normalize slashes in resolve_url Our path functions expect to work with slashes, so convert a path with backslashes into one with slashes at the top of the function.

08c2d3e9

2015-07-11T18:31:28

submodule: lookup the submodule by path if available If we get the path from the gitmodules file, look up the submodule we're interested in by path, rather then by name. Otherwise we might get duplicate results.

e0af3cb3

2015-07-01T21:15:06

submodule: correctly delimit the keys to use for lookup The regex we use to look at the gitmodules file does not correctly delimit the name of submodule which we want to look up and puts '.*' straight after the name, maching on any submodule which has the seeked submodule as a prefix of its name. Add the missing '\.' in the regex so we want a full stop to exist both before and after the submodule name.

7bfdd1c2

2015-06-30T10:21:06

Merge pull request #3270 from ethomson/warnings2 Remove some warnings

60655056

2015-06-29T21:37:07

submodule: cast enum to int for compare

c28a5c97

2015-06-29T21:10:47

submodule: remove trailing slashes from submodule paths We allow looking up a submodule by path, but we lost the path normalisation during the recent changes. Bring it back.

cf4030b0

2015-06-29T20:54:17

submodule: remove some obsolete logic Remove some of the logic that was left-over from the time we had a cache of submodules, plugging a leak of the submodule object in certain cases.

c2418f46

2015-06-25T12:48:44

Rename FALLBACK to UNSPECIFIED Fallback describes the mechanism, while unspecified explains what the user is thinking.

c4e3a3db

2015-05-09T11:22:57

submodule: handle writing out all enum values for settings We currently do not handle those enum values which require us to set "true" or unset variables in all cases. Use a common function which does understand this by looking at our mapping directly.

961861fa

2015-05-05T09:25:17

submodule: get rid of `_save()` We no longer have any setters which affect an instance, so `git_submodule_save()` is no longer relevant.

d6073b30

2015-05-05T09:22:35

submodule: make `_set_url()` affect the configuration With this one, we can get rid of the edit_and_save test.

486ba4cd

2015-05-05T09:13:52

submodule: make `_set_branch()` affect the configuration

4e636423

2015-05-05T09:01:20

submodule: make `_set_update_fetch_recurse_submodules()` affect the config Similarly to the other ones. In this test we copy over testing `RECURSE_YES` which shows an error in our handling of the `YES` variant which we may have to port to the rest.

e8a39f8e

2015-05-05T08:35:29

submodule: make `_set_update()` affect the configuration Moving on with the removal of runtime-changing variables, the update setting for a remote is whatever it was when it was looked up.

2278637c

2015-05-05T06:14:40

submodule: correct detection of existing submodules During the cache deletion, the check for whether we consider a submodule to exist got changed regarding submodules which are in the worktree but not configured. Instead of checking for the url field to be populated, check the location where we've found it.

d769a3fd

2015-05-05T06:03:21

submodule: bring back finding by path During the removal of the cache, we also removed the ability to use `_lookup()` to search by path rather than name. Bring this logic back.

c6f489c9

2015-05-04T17:29:12

submodule: add an ignore option to status This lets us specify in the status call which ignore rules we want to use (optionally falling back to whatever the submodule has in its configuration). This removes one of the reasons for having `_set_ignore()` set the value in-memory. We re-use the `IGNORE_RESET` value for this as it is no longer relevant but has a similar purpose to `IGNORE_FALLBACK`. Similarly, we remove `IGNORE_DEFAULT` which does not have use outside of initializers and move that to fall back to the configuration as well.

64bbd47a

2015-05-04T17:09:21

submodule: don't let status change an existing instance As submodules are becomes more like values, we should not let a status check to update its properties. Instead of taking a submodule, have status take a repo and submodule name.

5a9fc6c8

2015-05-04T16:22:56

submodule: make set_ignore() affect the configuration Instead of affecting a particular instance, make it change the configuration.

dfda2f68

2015-04-27T19:27:29

submodule: remove the per-repo cache Having this cache and giving them out goes against our multithreading guarantees and it makes it impossible to use submodules in a multi-threaded environment, as any thread can ask for a refresh which may reallocate some string in the submodule struct which we've accessed in a different one via a getter. This makes the submodules behave more like remotes, where each object is created upon request and not shared except explicitly by the user. This means that some tests won't pass yet, as they assume they can affect the submodule objects in the cache and that will affect later operations.

624c949f

2015-06-20T16:17:28

index: make relative comparison use the checksum as well This is used by the submodule in order to figure out if the index has changed since it last read it. Using a timestamp is racy, so let's make it use the checksum, just like we now do for reloading the index itself.

8f0104ec

2015-04-21T22:10:36

Remove the callbacks struct from the remote Having the setting be different from calling its actions was not a great idea and made for the sake of the wrong convenience. Instead of that, accept either fetch options, push options or the callbacks when dealing with the remote. The fetch options are currently only the callbacks, but more options will be moved from setters and getters on the remote to the options. This does mean passing the same struct along the different functions but the typical use-case will only call git_remote_fetch() or git_remote_push() and so won't notice much difference.

129788a6

2015-03-18T11:45:18

Implement git_submodule_set_branch.

e6903ea2

2015-03-12T16:05:07

Fix git_submodule_sync writing URL to wrong key. Currently git_submodule_sync writes the submodule's URL to the key 'branch.<REMOTE_NAME>.remote' while the reference implementation of `git submodule sync` writes to 'remote.<REMOTE_NAME>.url', which is the intended behavior according to git-submodule(1).

4e498646

2015-01-15T16:50:31

repository: remove log message override for switching the active branch We want to use the "checkout: moving from ..." message in order to let git know when a change of branch has happened. Make the convenience functions for this goal write this message.

659cf202

2015-01-07T12:23:05

Remove the signature from ref-modifying functions The signature for the reflog is not something which changes dynamically. Almost all uses will be NULL, since we want for the repository's default identity to be used, making it noise. In order to allow for changing the identity, we instead provide git_repository_set_ident() and git_repository_ident() which allow a user to override the choice of signature.

c8e02b87

2015-02-15T21:07:05

Remove extra semicolon outside of a function Without this change, compiling with gcc and pedantic generates warning: ISO C does not allow extra ‘;’ outside of a function.

c868981f

2015-01-06T13:49:39

Add extern function to initialize submodule update options.

5018e2c6

2015-01-06T17:08:38

submodule: declare vars at top of func block

9d1f97df

2014-10-29T17:49:04

Introduce a convenience function for submodule update This introduces the functionality of submodule update in 'git_submodule_do_update'. The existing 'git_submodule_update' function is renamed to 'git_submodule_update_strategy'. The 'git_submodule_update' function now refers to functionality similar to `git submodule update`, while `git_submodule_update_strategy` is used to get the configured value of submodule.<name>.update.

b2ab887e

2014-10-20T18:07:32

submodule init should resolve relative url paths Submodule init should handle relative paths in .gitmodules files and resolve these urls when updating the git config file.

209425ce

2014-11-08T13:25:51

remote: rename _load() to _lookup() This brings it in line with the rest of the lookup functions.

bc737620

2014-08-20T10:24:41

Introduce option to use relative paths for repository work directory Teach git_repository_init_ext to use relative paths for the gitlink to the work directory. This is used when creating a sub repository where the sub repository resides in the parent repository's .git directory.

1e4976cb

2014-05-08T10:17:14

Be more careful with user-supplied buffers This adds in missing calls to `git_buf_sanitize` and fixes a number of places where `git_buf` APIs could inadvertently write NUL terminator bytes into invalid buffers. This also changes the behavior of `git_buf_sanitize` to NUL terminate a buffer if it can and of `git_buf_shorten` to do nothing if it can. Adds tests of filtering code with zeroed (i.e. unsanitized) buffer which was previously triggering a segfault.

7d490872

2014-04-10T22:31:01

Attribute file cache refactor This is a big refactoring of the attribute file cache to be a bit simpler which in turn makes it easier to enforce a lock around any updates to the cache so that it can be used in a threaded env. Tons of changes to the attributes and ignores code.

40ed4990

2014-02-11T14:45:37

Add diff threading tests and attr file cache locks This adds a basic test of doing simultaneous diffs on multiple threads and adds basic locking for the attr file cache because that was the immediate problem that arose from these tests.

eedeeb9e

2014-04-03T11:58:51

Test (and fix) the git_submodule_sync changes I wrote this stuff a while ago and forgot to write tests. Wanted to do so now to wrap up the PR and immediately found problems.

18cc7d28

2014-04-03T11:29:08

Minor code cleanup

f2fb4bac

2014-04-02T23:55:21

git_submodule_resolve_url supports relative urls The base for the relative urls is determined as follows, with descending priority: - remote url of HEAD's remote tracking branch - remote "origin" - workdir This follows git.git behaviour

4ece3e22

2014-04-01T12:19:11

Fix submodule accounting for name and path changes Wrote tests that try adding, removing, and updating the name of submodules which showed a number of problems with how we account for changes when incrementally updating the submodule info. Most of these issues didn't exist before because reloading would always blow away the old submodule data.

aa78c9ba

2014-04-01T10:22:51

Minor submodule cache locking improvements This improvement the management of the lock around submodule cache updates slightly, using the lock to make sure that foreach can safely make a snapshot of all existing submodules and making sure that git_submodule_add_setup also grabs a lock before inserting the new submodule. Cache initialization / refresh should already have been holding the lock correctly as it adds submodules.

eeeb9654

2014-03-30T15:35:56

Reinstate efficient submodule reloading This makes it so that git_submodule_reload_all will actually only reload changed items unless the `force` flag is used.

a4ccd2b0

2014-03-29T15:23:01

Use enums instead of bools for submodule options When forcing cache flushes or reload, etc., it is easier to keep track of intent using enums instead of plain bools. Also, this fixes a bug where the cache was not being properly refreshes by a git_submodule_reload_all.

db0e7878

2014-03-28T16:50:49

Make submodule refresh a bit smarter This makes submodule cache refresh actually look at the timestamps from the data sources for submodules and reload as needed if they have changed since the last refresh.

69b6ffc4

2014-03-28T14:02:21

Make a real submodule cache object This takes the old submodule cache which was just a git_strmap and makes a real git_submodule_cache object that can contain other things like a lock and timestamp-ish data to control refreshing of submodule info.

e402d2f1

2014-03-24T11:25:59

Submodule sync refactoring Turns out there was already a helper to do what I wanted to do, so I just made it so that I could use it for sync and switched to that instead.

8286300a

2013-12-18T11:48:57

Fix git_submodule_sync and add new config helper This fixes `git_submodule_sync` to correctly update the remote URL of the default branch of the submodule along with the URL in the parent repository config (i.e. match core Git's behavior). Also move some useful helper logic from the submodule code into a shared config API `git_config__update_entry` that can either set or delete an entry with constraints like not overwriting or not creating a new entry. I used that helper to update a couple other places in the code.

18234b14

2014-02-21T09:14:16

Add efficient git_buf join3 API There are a few places where we need to join three strings to assemble a path. This adds a simple join3 function to avoid the comparatively expensive join_n (which calls strlen on each string twice).

thodg/libgit2/src/submodule.c

src/submodule.c

Log