kmx git

Commit	Date	Message
f500c147	2022-10-28T08:39:02	Fixed DirectFB build
41d38c0f	2022-10-26T09:43:04	shape: More robust handling of failure cases in CreateShaper.
a905a786	2022-10-22T08:50:18	Clear the previous bitmap when calculating a new window shape Fixes https://github.com/libsdl-org/SDL/issues/6428
99f2a503	2022-10-13T22:40:24	X11 scancode mapping cleanup * Consolidated scancode mapping tables into a single location for all backends * Verified that the xfree86_scancode_table2 is largely identical to the Linux scancode table * Updated the Linux scancode table with the latest kernel keycodes (still unmapped) * Route X11 keysym -> scancode mapping through the linux scancode table (which a few hand-written exceptions), which will allow mappings to automatically get picked up as they are added in the Linux scancode table * Disabled verbose reporting of missing keysym mappings, we have enough data for now
f5afb7d1	2022-10-13T18:44:15	directfb: Fix return type of DirectFB_RenderPresent()
17f36c10	2022-07-31T16:16:38	keyboard: Remove no-op calls to SDL_SetKeymap()
8b438f7b	2022-07-31T15:34:03	keyboard: Only send SDL_KEYMAPCHANGED when the keymap actually changes
20a76b0e	2022-07-25T23:06:58	video: removed unused devindex argument from bootstrap's create method.
412ceb84	2022-05-24T16:27:54	video: Only check major version in SDL_GetWindowWMInfo Since #5602, SDL is intended to have the same ABI across the whole major-version 2 cycle, so we should not check that the minor version matches the one that was used to compile an application. There are two checks that could make sense here. The first check is that the major version matches the expected major version. This is usually unnecessary and is not usually done (if we're calling into the wrong library we'll likely crash anyway), but since we have the information, we might as well continue to use it. The second check is whether the version provided by the caller is equal to or greater than a threshold version at which additional fields were added to the struct. If it is, we should populate those fields; if it is not, then we cannot. This is only useful on platforms where additional fields have genuinely been added during the lifetime of SDL 2, like Windows and DirectFB (but not X11). This commit changes the first check to be consistent about only looking at the minor version, while leaving the second check using SDL_VERSIONNUM (which will be removed or widened in SDL 3, but it's fine for now). Resolves: https://github.com/libsdl-org/SDL/issues/5711 Fixes: cd7c2f1 "Switch versioning scheme to be the same as GLib and Flatpak" Signed-off-by: Simon McVittie <smcv@collabora.com>
120c76c8	2022-01-03T09:40:00	Updated copyright for 2022
3a5e148b	2021-12-14T11:02:07	Renderer backends use SDL_Color instead of int for geometry colors.
19bf36db	2021-11-22T16:37:19	DirectFB: use SDL_malloc
d31251b0	2021-11-21T22:30:48	use SDL's functions version inplace of libc version
3bf7994f	2021-09-27T14:38:12	Add and use `SDL_FALLTHROUGH` for fallthroughs Case fallthrough warnings can be suppressed using the __fallthrough__ compiler attribute. Unfortunately, not all compilers have this attribute, or even have __has_attribute to check if they have the __fallthrough__ attribute. [[fallthrough]] is also available in C++17 and the next C2x, but not everyone uses C++17 or C2x. So define the SDL_FALLTHROUGH macro to deal with those problems - if we are using C++17 or C2x, it expands to [[fallthrough]]; else if the compiler has __has_attribute and has the __fallthrough__ attribute, then it expands to __attribute__((__fallthrough__)); else it expands to an empty statement, with a /* fallthrough / comment (it's a do {} while (0) statement, because users of this macro need to use a semicolon, because [[fallthrough]] and __attribute__((__fallthrough__)) require a semicolon). Clang before Clang 10 and GCC before GCC 7 have problems with using __attribute__ as a sole statement and warn about a "declaration not declaring anything", so fall back to using the / fallthrough / comment if we are using those older compiler versions. Applications using SDL are also free to use this macro (because it is defined in begin_code.h). All existing / fallthrough */ comments have been replaced with this macro. Some of them were unnecessary because they were the last case in a switch; using SDL_FALLTHROUGH in those cases would result in a compile error on compilers that support __fallthrough__, for having a __attribute__((__fallthrough__)) statement that didn't immediately precede a case label.
abc12a83	2021-11-11T15:58:44	Revert "Add and use `SDL_FALLTHROUGH` for fallthroughs" This reverts commit 66a08aa3914a98667f212e79b4f0b9453203d656. This causes problems with older compilers: https://github.com/libsdl-org/SDL/pull/4791#issuecomment-966630997
66a08aa3	2021-09-27T14:38:12	Add and use `SDL_FALLTHROUGH` for fallthroughs Case fallthrough warnings can be suppressed using the __fallthrough__ compiler attribute. Unfortunately, not all compilers have this attribute, or even have __has_attribute to check if they have the __fallthrough__ attribute. [[fallthrough]] is also available in C++17 and the next C2x, but not everyone uses C++17 or C2x. So define the SDL_FALLTHROUGH macro to deal with those problems - if we are using C++17 or C2x, it expands to [[fallthrough]]; else if the compiler has __has_attribute and has the __fallthrough__ attribute, then it expands to __attribute__((__fallthrough__)); else it expands to an empty statement, with a /* fallthrough / comment (it's a do {} while (0) statement, because users of this macro need to use a semicolon, because [[fallthrough]] and __attribute__((__fallthrough__)) require a semicolon). Applications using SDL are also free to use this macro (because it is defined in begin_code.h). All existing / fallthrough */ comments have been replaced with this macro. Some of them were unnecessary because they were the last case in a switch; using SDL_FALLTHROUGH in those cases would result in a compile error on compilers that support __fallthrough__, for having a __attribute__((__fallthrough__)) statement that didn't immediately precede a case label.
23e252bf	2021-10-02T14:57:40	DirectFB: provide RenderCopyEx via RenderGeometry
77acd44f	2021-10-01T22:30:51	DirectFB: fixed creation of palette textures
83d60090	2021-09-30T23:47:37	DirectFB: add partial support for RenderGeometry allow to fill triangles with color or texture but only uniform vertex color is handled (not per vertex color)
77c8d111	2021-08-10T20:55:50	configuration updates for dlopen: - cmake, configure (CheckDLOPEN): --enable-sdl-dlopen is now history.. detach the dl api discovery from SDL_LOADSO_DLOPEN functionality. define HAVE_DLOPEN. also define DYNAPI_NEEDS_DLOPEN (CheckDLOPEN is called only for relevant platforms.) - update SDL_config.in and SDL_config.cmake accordingly. - SDL_dynapi.h: set SDL_DYNAMIC_API to 0 if DYNAPI_NEEDS_DLOPEN is defined, but HAVE_DLOPEN is not. - pthread/SDL_systhread.c: conditionalize dl api use to HAVE_DLOPEN - SDL_x11opengl.c, SDL_DirectFB_opengl.c, SDL_naclopengles.c: rely on HAVE_DLOPEN, not SDL_LOADSO_DLOPEN. - SDL_config_android.h, SDL_config_iphoneos.h, SDL_config_macosx.h, SDL_config_pandora.h, and SDL_config_wiz.h: define HAVE_DLOPEN. Closes: https://github.com/libsdl-org/SDL/pull/4351
6b057c67	2021-01-26T19:16:17	Expose separate keyboard and mouse grab support This adds SDL_SetWindowKeyboardGrab(), SDL_GetWindowKeyboardGrab(), SDL_SetWindowMouseGrab(), SDL_GetWindowMouseGrab(), and new SDL_WINDOW_KEYBOARD_GRABBED flag. It also updates the test harness to exercise this functionality and makes a minor fix to X11 that I missed in https://hg.libsdl.org/SDL/rev/02a2d609369b To fit in with this new support, SDL_WINDOW_INPUT_CAPTURE has been renamed to SDL_WINDOW_MOUSE_CAPTURE with the old name remaining as an alias for backwards compatibility with older code.
a1d288be	2021-01-26T00:05:01	DirectFB: Split input grab handling into keyboard and mouse parts The grabbed_window field is superfluous now since SDL added the SDL_GetGrabbedWindow() function, so it can be removed. DirectFB_SetWindowMouseGrab() is also simplified because SDL handles ungrabbing any previously grabbed window prior to calling SetWindowMouseGrab() now. Compile-tested only.
a0d3c6c6	2021-01-25T21:42:14	Rename SetWindowGrab() to SetWindowMouseGrab()
9130f7c3	2021-01-02T10:25:38	Updated copyright for 2021
6ac0b23d	2020-12-18T21:37:20	SDL_DirectFB_video.c: DSPF_ABGR requires directfb >= 1.5.0 -- add guard.
cb361896	2020-12-09T07:16:22	Fixed bug 5235 - All internal sources should include SDL_assert.h Ryan C. Gordon We should really stick this in SDL_internal.h or something so it's always available.
4121ab62	2020-11-23T21:25:07	Fixed bug 5354 - DirectFB: Add Vulkan support Nicolas Caramelli This patch adds Vulkan support for the DirectFB video driver. A screenshot with SDL tests running on DirectFB is available on the HiGFXback project: https://github.com/caramelli/higfxback/wiki/DirectFB#sdl
76980e30	2020-10-08T16:42:20	Added events for dynamically connecting and disconnecting displays, with an iOS implementation
052a1373	2020-07-12T19:11:15	Merge VideoBootStrap::available into VideoBootStrap::create The two are only ever called together, and combining them makes it possible to eliminate redundant symbol loading and redundant attempts to connect to a display server.
bdfd1b68	2020-05-29T16:02:49	Fixed bug 5146 - SDL_RenderFillRect doesn't work in DirectFB Lacky It looks like refactoring of SDL2 internal API has broken SDL_RenderFillRect for DirectFB. In new version function SDL_RenderFillRect returns 0, but rectangle is not visible. Replacing "count" with "len" in the argument list for SDL_memcpy in DirectFB_QueueFillRects fixes problem.
b6afbe63	2020-04-07T09:38:57	Added SDL_log.h to SDL_internal.h so logging is available everywhere
a4b0204b	2020-03-24T10:05:51	src/video/directfb/SDL_DirectFB_render.c: fix build Build with directfb is broken due to a spurious '}' and a missing 'E' since version 2.0.12 and https://hg.libsdl.org/SDL/rev/4c2dcf490cba: /home/buildroot/autobuild/run/instance-2/output-1/build/sdl2-2.0.12/src/video/directfb/SDL_DirectFB_render.c: In function 'SetBlendMode': /home/buildroot/autobuild/run/instance-2/output-1/build/sdl2-2.0.12/src/video/directfb/SDL_DirectFB_render.c:202:9: error: case label not within a switch statement 202 \| case SDL_BLENDMODE_MUL: \| ^~~~ /home/buildroot/autobuild/run/instance-2/output-1/build/sdl2-2.0.12/src/video/directfb/SDL_DirectFB_render.c:205:67: error: 'DSBF_DSTCOLOR' undeclared (first use in this function); did you mean 'DSBF_DESTCOLOR'? 205 \| SDL_DFB_CHECK(destsurf->SetSrcBlendFunction(destsurf, DSBF_DSTCOLOR)); \| ^~~~~~~~~~~~~ Fixes: - http://autobuild.buildroot.org/results/83ccefee68c2800c0544e6f40fa8bc8ee6b67b77 Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
a8780c6a	2020-01-16T20:49:25	Updated copyright date for 2020
981e0d36	2020-01-16T08:52:59	Fixed bug 4903 - Lack of color multiply with alpha (SDL_BLENDMODE_MOD + SDL_BLENDMODE_BLEND) blending mode for all renderers Konrad This kind of blending is rather quite useful and in my opinion should be available for all renderers. I do need it myself, but since I didn't want to use a custom blending mode which is supported only by certain renderers (e.g. not in software which is quite important for me) I did write implementation of SDL_BLENDMODE_MUL for all renderers altogether. SDL_BLENDMODE_MUL implements following equation: dstRGB = (srcRGB * dstRGB) + (dstRGB * (1-srcA)) dstA = (srcA * dstA) + (dstA * (1-srcA)) Background: https://i.imgur.com/UsYhydP.png Blended texture: https://i.imgur.com/0juXQcV.png Result for SDL_BLENDMODE_MOD: https://i.imgur.com/wgNSgUl.png Result for SDL_BLENDMODE_MUL: https://i.imgur.com/Veokzim.png I think I did cover all possibilities within included patch, but I didn't write any tests for SDL_BLENDMODE_MUL, so it would be lovely if someone could do it.
5e19e66c	2019-12-22T13:39:44	Fixed bug 4914 - Expose SDL_ScaleMode and add SDL_SetTextureScaleMode/SDL_GetTextureScaleMode Konrad This was something rather trivial to add, but asked at least several times before (I did google about it as well). It should be possible to dynamically change scaling mode of the texture. It is actually trivial task, but until now it was only possible with a hint before creating a texture. I needed it for my game as well, so I took the liberty of writing it myself. This patch adds following functions: SDL_SetTextureScaleMode(SDL_Texture * texture, SDL_ScaleMode scaleMode); SDL_GetTextureScaleMode(SDL_Texture * texture, SDL_ScaleMode *scaleMode); That way you can change texture scaling on the fly.
4953e050	2019-07-31T05:11:40	use SDL_zeroa at more places where the argument is an array.
5e13087b	2019-01-04T22:01:14	Updated copyright for 2019
65a7c98c	2018-12-02T02:33:06	directfb: Updated render backend to new internal API. Totally untested, beyond it now compiles again. Probably needs some fixes. Fixes Bugzilla #4405.
5febdfce	2018-09-24T11:49:25	Fixed whitespace
404ba5ee	2018-08-28T13:37:11	Fixed bug 4229 - Add support for ABGR format in DirectFB renderer Alexandre DirectFB supports 32-bit ABGR pixel format via DSPF_ABGR, but SDL doesn't map SDL_PIXELFORMAT_ABGR8888 to DSPF_ABGR. A patch is attached and should add support for ABGR pixel format devices.
e3cc5b2c	2018-01-03T10:03:25	Updated copyright for 2018
0560544d	2017-08-28T09:51:25	Fixed 3783 - Default libGL path for directFB on Linux differs from x11 path Clayton Craft The default path used by directfb for libGL is different than the default path used by x11 in SDL2: ./src/video/directfb/SDL_DirectFB_opengl.c: path = "libGL.so"; ./src/video/x11/SDL_x11opengl.c: #define DEFAULT_OPENGL "libGL.so.1" On at least one distro (Alpine Linux), libGL.so is not created (or more accurately the symlink to libGL.so.1 is not created). For consistency, the 'path' variable in SDL_DirectFB_opengl.c should patch the DEFAULT_OPENGL in SDL_x11opengl.c ("libGL.so.1")
50efbda7	2017-08-28T00:43:14	Fixed mingw Windows build, since SDL_vulkan_internal.h includes windows.h
0d011ec6	2017-08-28T00:22:23	Renaming of guard header names to quiet -Wreserved-id-macro
6ef1a25d	2017-08-13T20:51:08	Fixed bug 3751 - DirectFB linux_input disabled by default Clayton Craft linux_input module is disabled by default, despite the comments in source code that it is otherwise: src/video/directfb/SDL_DirectFB_video.c: devdata->use_linux_input = readBoolEnv(DFBENV_USE_LINUX_INPUT, 0); /* default: on / src/video/directfb/SDL_DirectFB_video.h: #define DFBENV_USE_LINUX_INPUT "SDL_DIRECTFB_LINUX_INPUT" / Default: on */ When using the directfb driver, the linux_input module is suppressed unless the SDL app is started with "SDL_DIRECTFB_LINUX_INPUT=1" set in the environment. I recall seeing at one point that the directfb folks recommended using linux_input over the other input drivers, but I am having trouble locating this recommendation. In any case, I believe that this should really be defaulted to 'on' since it's vastly superior to the other dfb input drivers!
fa73685d	2017-06-16T23:30:30	directfb: Fixed quitting keyboard twice. SDL_VideoQuit() already calls SDL_KeyboardQuit().
5b75e903	2017-06-11T22:30:49	directfb: Fixed comment.
fbd30c36	2017-06-11T22:30:39	Fixed missing error messages for SDL_GetWindowWMInfo().
c609d856	2017-06-11T22:30:24	directfb: Fixed crash if creating renderer. SDL_GetWindowWMInfo() currently expects SDL to be 2.0.6 but SDL is still 2.0.5.
3c955d05	2017-06-11T00:50:26	syswm: prevent buffer overflow if SDL and app have different config headers. This only affects Wayland and DirectFB, as a Unix system generally has X11 support. Other platforms also have different sizes for the C union in question, but are likely the only target for that platform, etc. Apps that might run on Wayland or DirectFB will need to be compiled against new headers from an official 2.0.6 release, or be prepared to force the x11 target, or not use SDL_GetWindowWMInfo(). Fixes Bugzilla #3428.
4b47fa38	2017-06-04T23:15:47	Removed duplicate includes.
1e13d93f	2017-05-25T23:01:34	directfb: Changed internal function to be static.
c66f0471	2017-05-25T23:00:43	Removed unused internal window shape functions.
df4cf79d	2017-05-13T23:00:53	directfb: Fixed compiler warnings about undefined functions.
87e0d812	2017-05-12T23:00:40	directfb: Removed duplicate comment.
61c326e1	2017-05-11T23:00:39	directfb: Fixed typo in log message.
75c0d1ef	2017-05-11T23:00:21	directfb: Fixed compiler warnings about unused variables.
266816b4	2017-03-26T21:00:19	Removed newlines from error messages.
67ed8943	2017-01-01T19:10:36	Fixed bug 3529 - SDL_EGL_UnloadLibrary is not called at all on SDL_Quit kaisyu In case of OpenGLES, the sequences of loading and unloading driver library should be like that: SDL_Init ... SDL_GL_LoadLibrary SDL_EGL_LoadLibrary ... SDL_Quit ... SDL_GL_UnloadLibrary SDL_EGL_UnloadLibrary ... However, according to my test results, the varible '_this->gl_config.driver_loaded' does not allow 'SDL_GL_UnloadLibrary' to call 'SDL_EGL_UnloadLibrary'.
45b774e3	2017-01-01T18:33:28	Updated copyright for 2017
524bf3c2	2016-12-09T01:47:43	Fixed bug 3513 - SDL_GL_SwapWindow does not return error status Return an error code from SDL_GL_SwapWindow(), like the other SDL APIs.
009a3f5a	2016-11-15T01:14:30	Fixed bug 3490 - Build failure with --enable-video-directfb felix Building SDL 2.0.5, or even the Mercurial snapshot (r10608) with GCC 6.2.1 and --enable-video-directfb generates a number of compiler diagnostics and fails.
3bdaf4c6	2016-01-05T02:46:10	Added SDL_SetWindowOpacity() and SDL_GetWindowOpacity(). This is currently implemented for X11, Cocoa, Windows, and DirectFB. This patch is based on work in Unreal Engine 4's fork of SDL, compliments of Epic Games.
42065e78	2016-01-02T10:10:34	Updated copyright to 2016
0e45984f	2015-06-21T17:33:46	Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2c4a6ea0	2015-05-26T06:27:46	Updated the copyright year to 2015
b72938c8	2015-04-20T12:22:44	Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.
fe6c797c	2015-04-10T23:30:31	Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.
6e53bc9b	2015-04-08T02:00:14	SDL_SetWindowTitle() should never set a NULL pointer for the title string. Various backends reacted differently (or not at all) in the presence of a NULL pointer. This simplifies things. Fixes Bugzilla #2902.
b88ca1b4	2015-02-10T16:28:56	the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802
b48e54aa	2015-01-26T22:00:29	Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.
4f26e776	2014-12-04T21:41:30	Replaced free() with SDL_free() because related allocation also uses wrapper.
70438be2	2014-12-03T10:55:23	WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!
9c398852	2014-11-22T22:20:40	Corrected header file documentation comment.
72f703e3	2014-10-13T14:10:41	Fixed log typo
557d43e6	2014-10-13T10:46:27	Minor cleanups
24c86b55	2014-09-11T19:24:42	[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam
bf8ac8e7	2014-09-10T14:05:27	DSCAPS_GL was added for DirectFB 1.6
3dcb451f	2014-04-09T21:29:19	Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.
e8f5e010	2014-02-02T20:58:46	Fixed including SDL_internal.h twice for DirectFB.
58edac3e	2014-02-02T00:53:27	Fixed bug 2374 - Update copyright for 2014... Is it that time already??
f848adff	2013-11-29T10:06:08	Improve Android pause/resume behavior.
7e1289af	2013-11-24T23:56:17	Make internal SDL sources include SDL_internal.h instead of SDL_config.h The new header will include SDL_config.h, but allows for other global stuff.
08fa8da7	2013-10-20T21:56:15	Fixed bug 2129 - fix for bug 2121 breaks linking for mingw and throws multiple warnings Andreas Ertelt The problem in question is caused by changeset 7771 (http://hg.libsdl.org/SDL/rev/5486e579872e / https://bugzilla.libsdl.org/show_bug.cgi?id=2121) The redefinition of __inline__ (introduced by the addition of begin_code.h:128's "\|\| __STRICT_ANSI__") results in mingw's gcc throwing multiple warning: always_inline function might not be inlinable [-Wattributes] as well as a whole bunch of redefinitions of mingw internals which break linking of projects including the SDL2 headers.
90afb94e	2013-09-28T12:48:26	Corrected name of SDL_Color field from unused to a.
c95761e0	2013-09-27T23:29:05	Fixed bug 2100 - directfb fails to build
d3d6f9ad	2013-09-14T11:25:52	Fixed syntax error in C style block comment.
3e2930de	2013-08-29T08:29:51	Christoph Mallon: Remove pointless if (x) before SDL_FreeSurface(x)
f79fc33a	2013-08-29T08:29:21	Christoph Mallon: Remove pointless if (x) before SDL_free(x)
1e49b1ed	2013-08-21T09:47:10	OCD fixes: Adds a space after /* (glory to regular expressions!)
695344d1	2013-08-21T09:43:09	OCD fixes: Adds a space before */
dad42067	2013-08-12T11:13:50	Fixes #2022, do not resume on Android when surfaceChanged If the app is in landscape mode and the user presses the power button, a pause is followed immediately by a surfaceChanged event because the lock screen is shown in portrait mode. This triggers a "false" resume. So, we just pause and resume following the onWindowFocusChanged events. Also, wait for SDL_APP_WILLENTERBACKGROUND and SDL_APP_DIDENTERBACKGROUND before blocking the event pump.
1ad936eb	2013-08-11T19:56:43	Fixed bug 2027 - Full-screen appears to be broken - hang in SDL_DestroyWindow() Rainer Deyke I'm running Linux Mint 15 with the Cinnamon window manager. SDL_DestroyWindow consistently locks up for me when the window if fullscreen.

f500c147

2022-10-28T08:39:02

Fixed DirectFB build

41d38c0f

2022-10-26T09:43:04

shape: More robust handling of failure cases in CreateShaper.

a905a786

2022-10-22T08:50:18

Clear the previous bitmap when calculating a new window shape Fixes https://github.com/libsdl-org/SDL/issues/6428

99f2a503

2022-10-13T22:40:24

X11 scancode mapping cleanup * Consolidated scancode mapping tables into a single location for all backends * Verified that the xfree86_scancode_table2 is largely identical to the Linux scancode table * Updated the Linux scancode table with the latest kernel keycodes (still unmapped) * Route X11 keysym -> scancode mapping through the linux scancode table (which a few hand-written exceptions), which will allow mappings to automatically get picked up as they are added in the Linux scancode table * Disabled verbose reporting of missing keysym mappings, we have enough data for now

f5afb7d1

2022-10-13T18:44:15

directfb: Fix return type of DirectFB_RenderPresent()

17f36c10

2022-07-31T16:16:38

keyboard: Remove no-op calls to SDL_SetKeymap()

8b438f7b

2022-07-31T15:34:03

keyboard: Only send SDL_KEYMAPCHANGED when the keymap actually changes

20a76b0e

2022-07-25T23:06:58

video: removed unused devindex argument from bootstrap's create method.

412ceb84

2022-05-24T16:27:54

video: Only check major version in SDL_GetWindowWMInfo Since #5602, SDL is intended to have the same ABI across the whole major-version 2 cycle, so we should not check that the minor version matches the one that was used to compile an application. There are two checks that could make sense here. The first check is that the major version matches the expected major version. This is usually unnecessary and is not usually done (if we're calling into the wrong library we'll likely crash anyway), but since we have the information, we might as well continue to use it. The second check is whether the version provided by the caller is equal to or greater than a threshold version at which additional fields were added to the struct. If it is, we should populate those fields; if it is not, then we cannot. This is only useful on platforms where additional fields have genuinely been added during the lifetime of SDL 2, like Windows and DirectFB (but not X11). This commit changes the first check to be consistent about only looking at the minor version, while leaving the second check using SDL_VERSIONNUM (which will be removed or widened in SDL 3, but it's fine for now). Resolves: https://github.com/libsdl-org/SDL/issues/5711 Fixes: cd7c2f1 "Switch versioning scheme to be the same as GLib and Flatpak" Signed-off-by: Simon McVittie <smcv@collabora.com>

120c76c8

2022-01-03T09:40:00

Updated copyright for 2022

3a5e148b

2021-12-14T11:02:07

Renderer backends use SDL_Color instead of int for geometry colors.

19bf36db

2021-11-22T16:37:19

DirectFB: use SDL_malloc

d31251b0

2021-11-21T22:30:48

use SDL's functions version inplace of libc version

3bf7994f

2021-09-27T14:38:12

Add and use `SDL_FALLTHROUGH` for fallthroughs Case fallthrough warnings can be suppressed using the __fallthrough__ compiler attribute. Unfortunately, not all compilers have this attribute, or even have __has_attribute to check if they have the __fallthrough__ attribute. [[fallthrough]] is also available in C++17 and the next C2x, but not everyone uses C++17 or C2x. So define the SDL_FALLTHROUGH macro to deal with those problems - if we are using C++17 or C2x, it expands to [[fallthrough]]; else if the compiler has __has_attribute and has the __fallthrough__ attribute, then it expands to __attribute__((__fallthrough__)); else it expands to an empty statement, with a /* fallthrough */ comment (it's a do {} while (0) statement, because users of this macro need to use a semicolon, because [[fallthrough]] and __attribute__((__fallthrough__)) require a semicolon). Clang before Clang 10 and GCC before GCC 7 have problems with using __attribute__ as a sole statement and warn about a "declaration not declaring anything", so fall back to using the /* fallthrough */ comment if we are using those older compiler versions. Applications using SDL are also free to use this macro (because it is defined in begin_code.h). All existing /* fallthrough */ comments have been replaced with this macro. Some of them were unnecessary because they were the last case in a switch; using SDL_FALLTHROUGH in those cases would result in a compile error on compilers that support __fallthrough__, for having a __attribute__((__fallthrough__)) statement that didn't immediately precede a case label.

abc12a83

2021-11-11T15:58:44

Revert "Add and use `SDL_FALLTHROUGH` for fallthroughs" This reverts commit 66a08aa3914a98667f212e79b4f0b9453203d656. This causes problems with older compilers: https://github.com/libsdl-org/SDL/pull/4791#issuecomment-966630997

66a08aa3

2021-09-27T14:38:12

Add and use `SDL_FALLTHROUGH` for fallthroughs Case fallthrough warnings can be suppressed using the __fallthrough__ compiler attribute. Unfortunately, not all compilers have this attribute, or even have __has_attribute to check if they have the __fallthrough__ attribute. [[fallthrough]] is also available in C++17 and the next C2x, but not everyone uses C++17 or C2x. So define the SDL_FALLTHROUGH macro to deal with those problems - if we are using C++17 or C2x, it expands to [[fallthrough]]; else if the compiler has __has_attribute and has the __fallthrough__ attribute, then it expands to __attribute__((__fallthrough__)); else it expands to an empty statement, with a /* fallthrough */ comment (it's a do {} while (0) statement, because users of this macro need to use a semicolon, because [[fallthrough]] and __attribute__((__fallthrough__)) require a semicolon). Applications using SDL are also free to use this macro (because it is defined in begin_code.h). All existing /* fallthrough */ comments have been replaced with this macro. Some of them were unnecessary because they were the last case in a switch; using SDL_FALLTHROUGH in those cases would result in a compile error on compilers that support __fallthrough__, for having a __attribute__((__fallthrough__)) statement that didn't immediately precede a case label.

23e252bf

2021-10-02T14:57:40

DirectFB: provide RenderCopyEx via RenderGeometry

77acd44f

2021-10-01T22:30:51

DirectFB: fixed creation of palette textures

83d60090

2021-09-30T23:47:37

DirectFB: add partial support for RenderGeometry allow to fill triangles with color or texture but only uniform vertex color is handled (not per vertex color)

77c8d111

2021-08-10T20:55:50

configuration updates for dlopen: - cmake, configure (CheckDLOPEN): --enable-sdl-dlopen is now history.. detach the dl api discovery from SDL_LOADSO_DLOPEN functionality. define HAVE_DLOPEN. also define DYNAPI_NEEDS_DLOPEN (CheckDLOPEN is called only for relevant platforms.) - update SDL_config.in and SDL_config.cmake accordingly. - SDL_dynapi.h: set SDL_DYNAMIC_API to 0 if DYNAPI_NEEDS_DLOPEN is defined, but HAVE_DLOPEN is not. - pthread/SDL_systhread.c: conditionalize dl api use to HAVE_DLOPEN - SDL_x11opengl.c, SDL_DirectFB_opengl.c, SDL_naclopengles.c: rely on HAVE_DLOPEN, not SDL_LOADSO_DLOPEN. - SDL_config_android.h, SDL_config_iphoneos.h, SDL_config_macosx.h, SDL_config_pandora.h, and SDL_config_wiz.h: define HAVE_DLOPEN. Closes: https://github.com/libsdl-org/SDL/pull/4351

6b057c67

2021-01-26T19:16:17

Expose separate keyboard and mouse grab support This adds SDL_SetWindowKeyboardGrab(), SDL_GetWindowKeyboardGrab(), SDL_SetWindowMouseGrab(), SDL_GetWindowMouseGrab(), and new SDL_WINDOW_KEYBOARD_GRABBED flag. It also updates the test harness to exercise this functionality and makes a minor fix to X11 that I missed in https://hg.libsdl.org/SDL/rev/02a2d609369b To fit in with this new support, SDL_WINDOW_INPUT_CAPTURE has been renamed to SDL_WINDOW_MOUSE_CAPTURE with the old name remaining as an alias for backwards compatibility with older code.

a1d288be

2021-01-26T00:05:01

DirectFB: Split input grab handling into keyboard and mouse parts The grabbed_window field is superfluous now since SDL added the SDL_GetGrabbedWindow() function, so it can be removed. DirectFB_SetWindowMouseGrab() is also simplified because SDL handles ungrabbing any previously grabbed window prior to calling SetWindowMouseGrab() now. Compile-tested only.

a0d3c6c6

2021-01-25T21:42:14

Rename SetWindowGrab() to SetWindowMouseGrab()

9130f7c3

2021-01-02T10:25:38

Updated copyright for 2021

6ac0b23d

2020-12-18T21:37:20

SDL_DirectFB_video.c: DSPF_ABGR requires directfb >= 1.5.0 -- add guard.

cb361896

2020-12-09T07:16:22

Fixed bug 5235 - All internal sources should include SDL_assert.h Ryan C. Gordon We should really stick this in SDL_internal.h or something so it's always available.

4121ab62

2020-11-23T21:25:07

Fixed bug 5354 - DirectFB: Add Vulkan support Nicolas Caramelli This patch adds Vulkan support for the DirectFB video driver. A screenshot with SDL tests running on DirectFB is available on the HiGFXback project: https://github.com/caramelli/higfxback/wiki/DirectFB#sdl

76980e30

2020-10-08T16:42:20

Added events for dynamically connecting and disconnecting displays, with an iOS implementation

052a1373

2020-07-12T19:11:15

Merge VideoBootStrap::available into VideoBootStrap::create The two are only ever called together, and combining them makes it possible to eliminate redundant symbol loading and redundant attempts to connect to a display server.

bdfd1b68

2020-05-29T16:02:49

Fixed bug 5146 - SDL_RenderFillRect doesn't work in DirectFB Lacky It looks like refactoring of SDL2 internal API has broken SDL_RenderFillRect for DirectFB. In new version function SDL_RenderFillRect returns 0, but rectangle is not visible. Replacing "count" with "len" in the argument list for SDL_memcpy in DirectFB_QueueFillRects fixes problem.

b6afbe63

2020-04-07T09:38:57

Added SDL_log.h to SDL_internal.h so logging is available everywhere

a4b0204b

2020-03-24T10:05:51

src/video/directfb/SDL_DirectFB_render.c: fix build Build with directfb is broken due to a spurious '}' and a missing 'E' since version 2.0.12 and https://hg.libsdl.org/SDL/rev/4c2dcf490cba: /home/buildroot/autobuild/run/instance-2/output-1/build/sdl2-2.0.12/src/video/directfb/SDL_DirectFB_render.c: In function 'SetBlendMode': /home/buildroot/autobuild/run/instance-2/output-1/build/sdl2-2.0.12/src/video/directfb/SDL_DirectFB_render.c:202:9: error: case label not within a switch statement 202 | case SDL_BLENDMODE_MUL: | ^~~~ /home/buildroot/autobuild/run/instance-2/output-1/build/sdl2-2.0.12/src/video/directfb/SDL_DirectFB_render.c:205:67: error: 'DSBF_DSTCOLOR' undeclared (first use in this function); did you mean 'DSBF_DESTCOLOR'? 205 | SDL_DFB_CHECK(destsurf->SetSrcBlendFunction(destsurf, DSBF_DSTCOLOR)); | ^~~~~~~~~~~~~ Fixes: - http://autobuild.buildroot.org/results/83ccefee68c2800c0544e6f40fa8bc8ee6b67b77 Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>

a8780c6a

2020-01-16T20:49:25

Updated copyright date for 2020

981e0d36

2020-01-16T08:52:59

Fixed bug 4903 - Lack of color multiply with alpha (SDL_BLENDMODE_MOD + SDL_BLENDMODE_BLEND) blending mode for all renderers Konrad This kind of blending is rather quite useful and in my opinion should be available for all renderers. I do need it myself, but since I didn't want to use a custom blending mode which is supported only by certain renderers (e.g. not in software which is quite important for me) I did write implementation of SDL_BLENDMODE_MUL for all renderers altogether. SDL_BLENDMODE_MUL implements following equation: dstRGB = (srcRGB * dstRGB) + (dstRGB * (1-srcA)) dstA = (srcA * dstA) + (dstA * (1-srcA)) Background: https://i.imgur.com/UsYhydP.png Blended texture: https://i.imgur.com/0juXQcV.png Result for SDL_BLENDMODE_MOD: https://i.imgur.com/wgNSgUl.png Result for SDL_BLENDMODE_MUL: https://i.imgur.com/Veokzim.png I think I did cover all possibilities within included patch, but I didn't write any tests for SDL_BLENDMODE_MUL, so it would be lovely if someone could do it.

5e19e66c

2019-12-22T13:39:44

Fixed bug 4914 - Expose SDL_ScaleMode and add SDL_SetTextureScaleMode/SDL_GetTextureScaleMode Konrad This was something rather trivial to add, but asked at least several times before (I did google about it as well). It should be possible to dynamically change scaling mode of the texture. It is actually trivial task, but until now it was only possible with a hint before creating a texture. I needed it for my game as well, so I took the liberty of writing it myself. This patch adds following functions: SDL_SetTextureScaleMode(SDL_Texture * texture, SDL_ScaleMode scaleMode); SDL_GetTextureScaleMode(SDL_Texture * texture, SDL_ScaleMode *scaleMode); That way you can change texture scaling on the fly.

4953e050

2019-07-31T05:11:40

use SDL_zeroa at more places where the argument is an array.

5e13087b

2019-01-04T22:01:14

Updated copyright for 2019

65a7c98c

2018-12-02T02:33:06

directfb: Updated render backend to new internal API. Totally untested, beyond it now compiles again. Probably needs some fixes. Fixes Bugzilla #4405.

5febdfce

2018-09-24T11:49:25

Fixed whitespace

404ba5ee

2018-08-28T13:37:11

Fixed bug 4229 - Add support for ABGR format in DirectFB renderer Alexandre DirectFB supports 32-bit ABGR pixel format via DSPF_ABGR, but SDL doesn't map SDL_PIXELFORMAT_ABGR8888 to DSPF_ABGR. A patch is attached and should add support for ABGR pixel format devices.

e3cc5b2c

2018-01-03T10:03:25

Updated copyright for 2018

0560544d

2017-08-28T09:51:25

Fixed 3783 - Default libGL path for directFB on Linux differs from x11 path Clayton Craft The default path used by directfb for libGL is different than the default path used by x11 in SDL2: ./src/video/directfb/SDL_DirectFB_opengl.c: path = "libGL.so"; ./src/video/x11/SDL_x11opengl.c: #define DEFAULT_OPENGL "libGL.so.1" On at least one distro (Alpine Linux), libGL.so is not created (or more accurately the symlink to libGL.so.1 is not created). For consistency, the 'path' variable in SDL_DirectFB_opengl.c should patch the DEFAULT_OPENGL in SDL_x11opengl.c ("libGL.so.1")

50efbda7

2017-08-28T00:43:14

Fixed mingw Windows build, since SDL_vulkan_internal.h includes windows.h

0d011ec6

2017-08-28T00:22:23

Renaming of guard header names to quiet -Wreserved-id-macro

6ef1a25d

2017-08-13T20:51:08

Fixed bug 3751 - DirectFB linux_input disabled by default Clayton Craft linux_input module is disabled by default, despite the comments in source code that it is otherwise: src/video/directfb/SDL_DirectFB_video.c: devdata->use_linux_input = readBoolEnv(DFBENV_USE_LINUX_INPUT, 0); /* default: on */ src/video/directfb/SDL_DirectFB_video.h: #define DFBENV_USE_LINUX_INPUT "SDL_DIRECTFB_LINUX_INPUT" /* Default: on */ When using the directfb driver, the linux_input module is suppressed unless the SDL app is started with "SDL_DIRECTFB_LINUX_INPUT=1" set in the environment. I recall seeing at one point that the directfb folks recommended using linux_input over the other input drivers, but I am having trouble locating this recommendation. In any case, I believe that this should really be defaulted to 'on' since it's vastly superior to the other dfb input drivers!

fa73685d

2017-06-16T23:30:30

directfb: Fixed quitting keyboard twice. SDL_VideoQuit() already calls SDL_KeyboardQuit().

5b75e903

2017-06-11T22:30:49

directfb: Fixed comment.

fbd30c36

2017-06-11T22:30:39

Fixed missing error messages for SDL_GetWindowWMInfo().

c609d856

2017-06-11T22:30:24

directfb: Fixed crash if creating renderer. SDL_GetWindowWMInfo() currently expects SDL to be 2.0.6 but SDL is still 2.0.5.

3c955d05

2017-06-11T00:50:26

syswm: prevent buffer overflow if SDL and app have different config headers. This only affects Wayland and DirectFB, as a Unix system generally has X11 support. Other platforms also have different sizes for the C union in question, but are likely the only target for that platform, etc. Apps that might run on Wayland or DirectFB will need to be compiled against new headers from an official 2.0.6 release, or be prepared to force the x11 target, or not use SDL_GetWindowWMInfo(). Fixes Bugzilla #3428.

4b47fa38

2017-06-04T23:15:47

Removed duplicate includes.

1e13d93f

2017-05-25T23:01:34

directfb: Changed internal function to be static.

c66f0471

2017-05-25T23:00:43

Removed unused internal window shape functions.

df4cf79d

2017-05-13T23:00:53

directfb: Fixed compiler warnings about undefined functions.

87e0d812

2017-05-12T23:00:40

directfb: Removed duplicate comment.

61c326e1

2017-05-11T23:00:39

directfb: Fixed typo in log message.

75c0d1ef

2017-05-11T23:00:21

directfb: Fixed compiler warnings about unused variables.

266816b4

2017-03-26T21:00:19

Removed newlines from error messages.

67ed8943

2017-01-01T19:10:36

Fixed bug 3529 - SDL_EGL_UnloadLibrary is not called at all on SDL_Quit kaisyu In case of OpenGLES, the sequences of loading and unloading driver library should be like that: SDL_Init ... SDL_GL_LoadLibrary SDL_EGL_LoadLibrary ... SDL_Quit ... SDL_GL_UnloadLibrary SDL_EGL_UnloadLibrary ... However, according to my test results, the varible '_this->gl_config.driver_loaded' does not allow 'SDL_GL_UnloadLibrary' to call 'SDL_EGL_UnloadLibrary'.

45b774e3

2017-01-01T18:33:28

Updated copyright for 2017

524bf3c2

2016-12-09T01:47:43

Fixed bug 3513 - SDL_GL_SwapWindow does not return error status Return an error code from SDL_GL_SwapWindow(), like the other SDL APIs.

009a3f5a

2016-11-15T01:14:30

Fixed bug 3490 - Build failure with --enable-video-directfb felix Building SDL 2.0.5, or even the Mercurial snapshot (r10608) with GCC 6.2.1 and --enable-video-directfb generates a number of compiler diagnostics and fails.

3bdaf4c6

2016-01-05T02:46:10

Added SDL_SetWindowOpacity() and SDL_GetWindowOpacity(). This is currently implemented for X11, Cocoa, Windows, and DirectFB. This patch is based on work in Unreal Engine 4's fork of SDL, compliments of Epic Games.

42065e78

2016-01-02T10:10:34

Updated copyright to 2016

0e45984f

2015-06-21T17:33:46

Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().

2c4a6ea0

2015-05-26T06:27:46

b72938c8

2015-04-20T12:22:44

Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.

fe6c797c

2015-04-10T23:30:31

Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.

6e53bc9b

2015-04-08T02:00:14

SDL_SetWindowTitle() should never set a NULL pointer for the title string. Various backends reacted differently (or not at all) in the presence of a NULL pointer. This simplifies things. Fixes Bugzilla #2902.

b88ca1b4

2015-02-10T16:28:56

the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802

b48e54aa

2015-01-26T22:00:29

Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.

4f26e776

2014-12-04T21:41:30

Replaced free() with SDL_free() because related allocation also uses wrapper.

70438be2

2014-12-03T10:55:23

WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!

9c398852

2014-11-22T22:20:40

Corrected header file documentation comment.

72f703e3

2014-10-13T14:10:41

Fixed log typo

557d43e6

2014-10-13T10:46:27

Minor cleanups

24c86b55

2014-09-11T19:24:42

[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam

bf8ac8e7

2014-09-10T14:05:27

DSCAPS_GL was added for DirectFB 1.6

3dcb451f

2014-04-09T21:29:19

Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.

e8f5e010

2014-02-02T20:58:46

Fixed including SDL_internal.h twice for DirectFB.

58edac3e

2014-02-02T00:53:27

f848adff

2013-11-29T10:06:08

Improve Android pause/resume behavior.

7e1289af

2013-11-24T23:56:17

Make internal SDL sources include SDL_internal.h instead of SDL_config.h The new header will include SDL_config.h, but allows for other global stuff.

08fa8da7

2013-10-20T21:56:15

Fixed bug 2129 - fix for bug 2121 breaks linking for mingw and throws multiple warnings Andreas Ertelt The problem in question is caused by changeset 7771 (http://hg.libsdl.org/SDL/rev/5486e579872e / https://bugzilla.libsdl.org/show_bug.cgi?id=2121) The redefinition of __inline__ (introduced by the addition of begin_code.h:128's "|| __STRICT_ANSI__") results in mingw's gcc throwing multiple warning: always_inline function might not be inlinable [-Wattributes] as well as a whole bunch of redefinitions of mingw internals which break linking of projects including the SDL2 headers.

90afb94e

2013-09-28T12:48:26

Corrected name of SDL_Color field from unused to a.

c95761e0

2013-09-27T23:29:05

Fixed bug 2100 - directfb fails to build

d3d6f9ad

2013-09-14T11:25:52

Fixed syntax error in C style block comment.

3e2930de

2013-08-29T08:29:51

Christoph Mallon: Remove pointless if (x) before SDL_FreeSurface(x)

f79fc33a

2013-08-29T08:29:21

Christoph Mallon: Remove pointless if (x) before SDL_free(x)

1e49b1ed

2013-08-21T09:47:10

OCD fixes: Adds a space after /* (glory to regular expressions!)

695344d1

2013-08-21T09:43:09

OCD fixes: Adds a space before */

dad42067

2013-08-12T11:13:50

Fixes #2022, do not resume on Android when surfaceChanged If the app is in landscape mode and the user presses the power button, a pause is followed immediately by a surfaceChanged event because the lock screen is shown in portrait mode. This triggers a "false" resume. So, we just pause and resume following the onWindowFocusChanged events. Also, wait for SDL_APP_WILLENTERBACKGROUND and SDL_APP_DIDENTERBACKGROUND before blocking the event pump.

1ad936eb

2013-08-11T19:56:43

Fixed bug 2027 - Full-screen appears to be broken - hang in SDL_DestroyWindow() Rainer Deyke I'm running Linux Mint 15 with the Cinnamon window manager. SDL_DestroyWindow consistently locks up for me when the window if fullscreen.

kc3-lang/SDL/src/video/directfb

src/video/directfb

Log