kmx git

Commit	Date	Message
871d43a8	2017-06-08T22:40:09	Removed unused hint includes.
4b47fa38	2017-06-04T23:15:47	Removed duplicate includes.
8eee82cd	2017-02-03T23:30:43	Windows: Fixed warning about unused variable. Found by buildbot.
710ae62a	2017-02-02T17:33:40	Remember XInput controllers that we've already seen, so when the raw device list changes we don't assign the old device to the new XInput userid. This isn't perfect, but at least we won't report the same device twice.
f3540242	2017-01-18T12:19:57	Removed unused variable
b0c5ceef	2017-01-18T12:18:50	Fixed bug 3533 - Enumeration joystick devices omitted during directinput enumeration white.magic The logic which decides if a device enumerated via the direct input system in the function EnumJoysticksCallback in SDL_dinputjoystick.c is processed is discarding valid joystick devices due to the assumption that devices of the type DI8DEVTYPE_SUPPLEMENTAL are not valid devices. This change was added with 2.0.4 with this commit http://hg.libsdl.org/SDL/rev/1b9d40126645 that is linked to this bug report https://bugzilla.libsdl.org/show_bug.cgi?id=2460 which indicates that in that case devices of the type DI8DEVTYPE_SUPPLEMENTAL were not desirable as they caused a singular device to emit multiple "device added" events. Since then there appear to have been a few fixes to handle devices that fall into various other classes in the following two commits: http://hg.libsdl.org/SDL/rev/10ffb4787d7a and http://hg.libsdl.org/SDL/rev/6a2bbac05728 Two devices I have reports of failing to be listed when the DI8DEVTYPE_SUPPLEMENTAL type is excluded are ECS Gametric Throttle and Thrustmaster MFD Cougar. Sam Lantinga I verified that the OUYA controller shows up as a single device with this change, so I've reverted the change to ignore supplemental devices, leaving framework in place to easily add devices that we want to ignore.
5cb1ca55	2017-01-18T11:57:27	Fixed building with mingw32
082132a7	2017-01-03T23:39:28	Fixed binding the D-pad on some Super NES style controllers Fixed a case where partial trigger pull could be bound to another button There is a fundamental problem not resolved by this commit: Some controllers have axes (triggers, pedals, etc.) that don't start at zero, but we're guaranteed that if we get a value that it's correct. For these controllers, the current code works, where we take the first value we get and use that as the zero point and generate axis motion starting from that point on. Other controllers have digital axes (D-pad) that assume a zero starting point, and the first value we get is the min or max axis value when the D-pad is moved. For these controllers, the current code thinks that the zero point is the axis value after the D-pad motion and this doesn't work. My hypothesis is that the first class of devices is more common and that we should solve for that, and add an exception to SDL_JoystickAxesCenteredAtZero() as needed for the second class of devices.
45b774e3	2017-01-01T18:33:28	Updated copyright for 2017
6d7da088	2016-12-27T01:39:07	Split controller axes into positive and negative sides so each can be bound independently. Using this a D-Pad can be mapped to a thumbstick and vice versa. Also added support for inverted axes, improving trigger binding support
3e928451	2016-12-23T20:36:24	Windows: Fixed compile error.
d6bcec8f	2016-12-10T15:23:17	WinRT: build fixes These fixes are lumped into two categories: 1. add new file, SDL_dataqueue.c, to UWP/WinRT build-inputs (via MSVC project files) 2. implement a temporary, hack-fix for a build error in SDL_xinputjoystick.c. Win32's Raw Input APIs are, unfortunately, not available for use in UWP/WinRT APIs. There does appear to be a replacement API, available in the Windows.Devices.HumanInterfaceDevice namespace. This fix should be sufficient to get SDL compiling again, without affecting Win32 builds, however using the UWP/WinRT API (in UWP/WinRT builds) would almost certainly be better (for UWP/WinRT builds). TODO: research Windows.Devices.HumanInterfaceDevice, and use that if and as appropriate.
2f6ba615	2016-11-24T12:24:22	Guess the USB VID/PID of XInput devices
97aa5775	2016-11-16T22:08:51	Fixed empty parameter list in signatures of internal functions.
47418f2d	2016-11-11T03:35:37	Updated Windows game controller support
ac74e16c	2016-11-10T17:19:34	Standardized the format of the SDL joystick GUID and added functions to retrieve the USB VID/PID from a joystick and game controller.
27d4f099	2016-10-07T23:40:44	Implemented SDL_GetHintBoolean() to make it easier to check boolean hints
24df68ea	2016-10-07T16:32:58	Fixed bug 2833 - Access Violation on SDL_PollEvent after init, delay and quit of joystick subsystem Jan Klass Not sure if this is limited to the joystick subsystem, but I created a minimal program for reproducibility, which is attached. The issue occurs with my gamepad Razer Onza (an xbox-style gamepad) plugged in. On initialization, the gamepad is being recognized. After quitting the subsystem, the poll will receive the joystick added event, which it instantly handles itself, calling SDL_SYS_JoystickDetect again, which this time calls IDirectInput8_EnumDevices with dinput = NULL (after it was released on quit). This seems to lead to an access violation within said function, which I have no source for.
3c8a2698	2016-10-01T18:10:50	WinRT: build fix in joystick code
7b34f47e	2016-10-01T14:50:22	Fixed windows build
fa0f4176	2016-10-01T14:48:18	Fixed build warnings and errors
64180d22	2016-10-01T14:05:35	Fixed bug 3138 - c_dfDIJoystick2 already defined in dinput8.lib Machiel van Hooren In SDL_dxjoystick.c line 349 there is a constant c_dfDIJoystick2. However, this constant is aparently also defined in dinput8.lib. I encountered a linking error when statically linking to SDL: SDL2_static.lib(SDL_dxjoystick.obj) : error LNK2005: _c_dfDIJoystick2 already defined in dinput8.lib My application is also linking to dinput8.lib because we rolled our own joystick input and are not using the joystick functionality from SDL.
ad1bfea5	2016-08-26T12:18:08	Added SDL_PrivateJoystickAdded() and SDL_PrivateJoystickRemoved() Updated the removal code to iterate over all joystick add messages instead of just the first one.
a21e6af5	2016-08-06T15:09:20	Add Xbox One controller GUIDs to the XInput filter in the DirectInput joystick driver. The Windows 10 Anniversary Update (1607) breaks the method uses that SDL uses to detect XInput devices. That is, on Windows 10 Anniversary Update, it is no longer possible to query RAWINPUT for HID devices, and check for "IG_" in the device name. Presumably, this will be fixed in the future. This patch works around the issue by adding the Xbox One controller series to the well-known device list. This skips the more expensive RAWINPUT check for those devices, and causes them to be detected as XInput devices once again.
9b4db2b8	2016-04-12T18:11:36	Patched to compile on various platforms.
c61675dc	2016-04-12T16:45:10	threads: Move SDL's own thread creation to a new internal API. This allows us to set an explicit stack size (overriding the system default and the global hint an app might have set), and remove all the macro salsa for dealing with _beginthreadex and such, as internal threads always set those to NULL anyhow. I've taken some guesses on reasonable (and tiny!) stack sizes for our internal threads, but some of these might turn out to be too small in practice and need an increase. Most of them are simple functions, though.
1c2beb21	2016-02-16T13:47:37	Allow using the game controller API with arcade sticks and other XInput devices
42065e78	2016-01-02T10:10:34	Updated copyright to 2016
dc804c0e	2015-11-14T21:29:14	WinRT: fixed build error in latest XInput code This change has also been tested as buildable + runnable on Win32 + MSVC 2015, 2013, 2012, and 2010. It may fix similar build errors (in XInput code) that are appearing in MingW builds (on buildbot).
a0c4b56f	2015-09-30T15:39:30	SDL - added new SDL_JoystickCurrentPowerLevel() API that returns the battery level of the selected joystick. Currently only implemented for XInput devices, other platforms are a TODO. CR: Sam
0e45984f	2015-06-21T17:33:46	Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
f29de0d3	2015-06-11T12:04:57	Fixed bug 3005 - MOMO steering wheel not detected by SDL Joe Thompson This is a regression. The changes to fix #2460 cause the EnumJoysticksCallback() function to return without adding devices (Line 345 in SDL-0a2b6bc7005f\src\joystick\windows\SDL_dinputjoystick.c). Looking at dinput.h on my system, at least DI8DEVTYPE_DRIVING and DI8DEVTYPE_FLIGHT need to be added to the test. It might be better to check if (devtype == DI8DEVTYPE_SUPPLEMENTAL) rather than checking if it is NOT EQUAL to a long list of types. Or check if the device is already in the list.
e90f87ba	2015-05-28T01:08:33	Another attempt to get this to compile.
4add1694	2015-05-28T01:02:03	Patched to compile on MingW. (I think!)
58447b24	2015-05-28T00:54:52	Move tests from SDL_config higher up in Windows joystick/haptic code. Fixes Bugzilla #2932.
7f17e0ab	2015-05-27T10:29:43	Fixed detecting PS4 wired controller on Windows
2c4a6ea0	2015-05-26T06:27:46	Updated the copyright year to 2015
b72938c8	2015-04-20T12:22:44	Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.
3e1d3629	2015-04-15T21:29:55	Fixed typo in internal joystick documentation comments.
fe6c797c	2015-04-10T23:30:31	Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.
78026f54	2015-04-08T02:24:17	Patched to compile on Windows.
785618af	2015-04-08T02:14:59	DirectInput: ignore everything but joysticks and gamepads (thanks, Justin!). Fixes Bugzilla #2460.
162ef5ea	2015-03-24T13:52:01	Cleanups in the joystick code. Removed some redundant state and other confusions. Fixes Bugzilla #2738.
da843f6a	2015-03-11T21:14:21	Updated internal documentation comments.
b88ca1b4	2015-02-10T16:28:56	the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802
b48e54aa	2015-01-26T22:00:29	Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.
2b53ffc7	2015-01-16T23:07:10	Fixed wrong documentation in joystick implementation source.
70438be2	2014-12-03T10:55:23	WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!
9c398852	2014-11-22T22:20:40	Corrected header file documentation comment.
1b341f58	2014-10-15T15:50:35	WinRT build fix
24c86b55	2014-09-11T19:24:42	[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam
cd8f63f2	2014-07-07T13:21:54	Hopefully fixed Cygwin build
a2d5dd02	2014-07-07T13:19:53	Removed useless assert
1ee96bb9	2014-07-07T10:26:28	Fixed mingw64 build and warnings
b79e7f32	2014-07-03T15:39:55	Split the XInput and DirectInput code so Windows RT can use the existing XInput support.
52ec151f	2014-06-24T13:31:25	Fixed bug 2553 - Add support to all XInput devices This adds support for all XInput devices, exposed through the SDL joystick API. The button and axis reporting for XInput devices has been changed to match DirectInput and other platforms. The game controller xinput mapping has been updated so this change is seamless. There is a new hint, SDL_HINT_XINPUT_USE_OLD_JOYSTICK_MAPPING, for any applications that have hardcoded the old xinput button and axis set. This hint will be removed in SDL 2.1.
446d19c4	2014-06-14T23:31:23	Removed SDL_SYS_JoystickNeedsPolling(). It was simpler to just have the polling (actually: hotplug detection) functions return immediately if it's not an appropriate time to poll. Note that previously, if any joystick/controller was opened, we would poll every time anyhow, skipping this function.
da6d9a9f	2014-06-04T10:56:56	Added annotations to help code analysis tools CR: Bruce Dawson
3dcb451f	2014-04-09T21:29:19	Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.
c3c24a33	2014-03-31T10:38:26	Fixed the joystick side of XInput haptic detection on Windows 8
7eaf8997	2014-03-17T19:11:18	Fixed SDL_HapticOpenFromJoystick() with DirectInput devices.
754067db	2014-03-01T22:27:21	Added a FIXME.
7fa4eece	2014-03-01T22:27:13	Fixed a typo in a comment.
73936208	2014-03-01T20:59:43	Added some FIXMEs.
e42d46b4	2014-02-06T07:37:20	Wired up haptic hotplugging for Windows DirectInput/XInput code.
58edac3e	2014-02-02T00:53:27	Fixed bug 2374 - Update copyright for 2014... Is it that time already??
090327e7	2013-12-09T16:03:18	Implemented the Dynamic API magic.
f848adff	2013-11-29T10:06:08	Improve Android pause/resume behavior.
7e1289af	2013-11-24T23:56:17	Make internal SDL sources include SDL_internal.h instead of SDL_config.h The new header will include SDL_config.h, but allows for other global stuff.
5e74299a	2013-10-20T15:40:20	Fix adding of XInput devices (thanks, Mitchell!) Partially fixes Bugzilla #2126.
7ad441a3	2013-10-17T23:40:13	Fixed bug 2069 - Device addition/removal queries all USB devices rather than only HID devices. Andreas Ertelt SDL_dxjoystick.c is setting the classguid for device (dis)connect events to USB Devices in general: dbh.dbcc_classguid = GUID_DEVINTERFACE_USB_DEVICE; Wouldn't it make more sense to have it just subscribe to Hid device events? This would mean less meaningless events reaching the application.
12ca3ce3	2013-10-17T23:02:29	Fixed building using MinGW Our SDL_windows.h needed to be included before anything else so UNICODE is defined.
f79fc33a	2013-08-29T08:29:21	Christoph Mallon: Remove pointless if (x) before SDL_free(x)
257cef30	2013-08-28T22:09:17	Change order we enumerate Windows joysticks. Make it so XInput devices are listed before DirectInput devices, and that the XInput devices are sorted by userid in ascending numeric order (so device 0 comes first).
ea4350d8	2013-08-28T22:07:54	Don't corrupt XInput device state during SDL_SYS_JoystickClose().
aa652114	2013-08-28T17:17:21	Make XInput joystick names match the numbers on the device. (And how the Haptic code already names them.)
4b255c63	2013-08-28T16:43:47	Reworked XInput and DirectInput joystick code. Now multiple XInput controllers map correctly to device indexes instead of grabbing the first available userid, and are completely separated out from DirectInput. Also, the hardcoded limitation on number of DirectInput devices is gone. I don't expect there to really ever be more than eight joysticks plugged into a machine, but it was a leftover limitation for a static array we didn't actually use anymore. Fixes Bugzilla #1984. (etc?)
c89e0469	2013-08-28T16:35:32	Better XInput detection code for DirectInput device enumeration. This code is way faster than the Wbem code, and less ugly.
cd27a1ef	2013-08-21T12:12:04	Fixed compiling on old versions of the DirectX SDK
9faefccd	2013-08-21T10:32:04	SDL - detect that you tried to open a gamecontroller in xinput mode and failed, then re-get the mapping for the dinput variant you did open (and most likely now just fail the open) CR: SamL
05d8c2dc	2013-08-21T10:31:44	Fix SDL xinput code to work at all when xinput has devices at high indexes but no device connected at lower index, for instance 0->disconnected, 1->wireles, 2->wired. Previously the SDL code assumed the indexes were always used up in order which is not true at all and lead to a bunch of failure cases where controllers would go unrecognized. This entire function is kind of a mess and more complicated than needed, but I don't want to refactor it too heavily tonight. May look at improving how the indexes are assigned more significanly later. The way it handles not finding a valid "gamepad" type device is also super broken, it leaves in place the xinput bindings but opens the controller with dinput and ends up with completely wrong mappings, not solving that now, but fixing the bug where we'd very frequently not find a controller due to gaps in assigned player numbers should mostly avoid it.
552b04c5	2013-08-20T20:34:40	More non C89 compliant comments
dad42067	2013-08-12T11:13:50	Fixes #2022, do not resume on Android when surfaceChanged If the app is in landscape mode and the user presses the power button, a pause is followed immediately by a surfaceChanged event because the lock screen is shown in portrait mode. This triggers a "false" resume. So, we just pause and resume following the onWindowFocusChanged events. Also, wait for SDL_APP_WILLENTERBACKGROUND and SDL_APP_DIDENTERBACKGROUND before blocking the event pump.
1ad936eb	2013-08-11T19:56:43	Fixed bug 2027 - Full-screen appears to be broken - hang in SDL_DestroyWindow() Rainer Deyke I'm running Linux Mint 15 with the Cinnamon window manager. SDL_DestroyWindow consistently locks up for me when the window if fullscreen.

871d43a8

2017-06-08T22:40:09

Removed unused hint includes.

4b47fa38

2017-06-04T23:15:47

Removed duplicate includes.

8eee82cd

2017-02-03T23:30:43

Windows: Fixed warning about unused variable. Found by buildbot.

710ae62a

2017-02-02T17:33:40

Remember XInput controllers that we've already seen, so when the raw device list changes we don't assign the old device to the new XInput userid. This isn't perfect, but at least we won't report the same device twice.

f3540242

2017-01-18T12:19:57

Removed unused variable

b0c5ceef

2017-01-18T12:18:50

Fixed bug 3533 - Enumeration joystick devices omitted during directinput enumeration white.magic The logic which decides if a device enumerated via the direct input system in the function EnumJoysticksCallback in SDL_dinputjoystick.c is processed is discarding valid joystick devices due to the assumption that devices of the type DI8DEVTYPE_SUPPLEMENTAL are not valid devices. This change was added with 2.0.4 with this commit http://hg.libsdl.org/SDL/rev/1b9d40126645 that is linked to this bug report https://bugzilla.libsdl.org/show_bug.cgi?id=2460 which indicates that in that case devices of the type DI8DEVTYPE_SUPPLEMENTAL were not desirable as they caused a singular device to emit multiple "device added" events. Since then there appear to have been a few fixes to handle devices that fall into various other classes in the following two commits: http://hg.libsdl.org/SDL/rev/10ffb4787d7a and http://hg.libsdl.org/SDL/rev/6a2bbac05728 Two devices I have reports of failing to be listed when the DI8DEVTYPE_SUPPLEMENTAL type is excluded are ECS Gametric Throttle and Thrustmaster MFD Cougar. Sam Lantinga I verified that the OUYA controller shows up as a single device with this change, so I've reverted the change to ignore supplemental devices, leaving framework in place to easily add devices that we want to ignore.

5cb1ca55

2017-01-18T11:57:27

Fixed building with mingw32

082132a7

2017-01-03T23:39:28

Fixed binding the D-pad on some Super NES style controllers Fixed a case where partial trigger pull could be bound to another button There is a fundamental problem not resolved by this commit: Some controllers have axes (triggers, pedals, etc.) that don't start at zero, but we're guaranteed that if we get a value that it's correct. For these controllers, the current code works, where we take the first value we get and use that as the zero point and generate axis motion starting from that point on. Other controllers have digital axes (D-pad) that assume a zero starting point, and the first value we get is the min or max axis value when the D-pad is moved. For these controllers, the current code thinks that the zero point is the axis value after the D-pad motion and this doesn't work. My hypothesis is that the first class of devices is more common and that we should solve for that, and add an exception to SDL_JoystickAxesCenteredAtZero() as needed for the second class of devices.

45b774e3

2017-01-01T18:33:28

Updated copyright for 2017

6d7da088

2016-12-27T01:39:07

Split controller axes into positive and negative sides so each can be bound independently. Using this a D-Pad can be mapped to a thumbstick and vice versa. Also added support for inverted axes, improving trigger binding support

3e928451

2016-12-23T20:36:24

Windows: Fixed compile error.

d6bcec8f

2016-12-10T15:23:17

WinRT: build fixes These fixes are lumped into two categories: 1. add new file, SDL_dataqueue.c, to UWP/WinRT build-inputs (via MSVC project files) 2. implement a temporary, hack-fix for a build error in SDL_xinputjoystick.c. Win32's Raw Input APIs are, unfortunately, not available for use in UWP/WinRT APIs. There does appear to be a replacement API, available in the Windows.Devices.HumanInterfaceDevice namespace. This fix should be sufficient to get SDL compiling again, without affecting Win32 builds, however using the UWP/WinRT API (in UWP/WinRT builds) would almost certainly be better (for UWP/WinRT builds). TODO: research Windows.Devices.HumanInterfaceDevice, and use that if and as appropriate.

2f6ba615

2016-11-24T12:24:22

Guess the USB VID/PID of XInput devices

97aa5775

2016-11-16T22:08:51

Fixed empty parameter list in signatures of internal functions.

47418f2d

2016-11-11T03:35:37

Updated Windows game controller support

ac74e16c

2016-11-10T17:19:34

Standardized the format of the SDL joystick GUID and added functions to retrieve the USB VID/PID from a joystick and game controller.

27d4f099

2016-10-07T23:40:44

Implemented SDL_GetHintBoolean() to make it easier to check boolean hints

24df68ea

2016-10-07T16:32:58

Fixed bug 2833 - Access Violation on SDL_PollEvent after init, delay and quit of joystick subsystem Jan Klass Not sure if this is limited to the joystick subsystem, but I created a minimal program for reproducibility, which is attached. The issue occurs with my gamepad Razer Onza (an xbox-style gamepad) plugged in. On initialization, the gamepad is being recognized. After quitting the subsystem, the poll will receive the joystick added event, which it instantly handles itself, calling SDL_SYS_JoystickDetect again, which this time calls IDirectInput8_EnumDevices with dinput = NULL (after it was released on quit). This seems to lead to an access violation within said function, which I have no source for.

3c8a2698

2016-10-01T18:10:50

WinRT: build fix in joystick code

7b34f47e

2016-10-01T14:50:22

Fixed windows build

fa0f4176

2016-10-01T14:48:18

Fixed build warnings and errors

64180d22

2016-10-01T14:05:35

Fixed bug 3138 - c_dfDIJoystick2 already defined in dinput8.lib Machiel van Hooren In SDL_dxjoystick.c line 349 there is a constant c_dfDIJoystick2. However, this constant is aparently also defined in dinput8.lib. I encountered a linking error when statically linking to SDL: SDL2_static.lib(SDL_dxjoystick.obj) : error LNK2005: _c_dfDIJoystick2 already defined in dinput8.lib My application is also linking to dinput8.lib because we rolled our own joystick input and are not using the joystick functionality from SDL.

ad1bfea5

2016-08-26T12:18:08

Added SDL_PrivateJoystickAdded() and SDL_PrivateJoystickRemoved() Updated the removal code to iterate over all joystick add messages instead of just the first one.

a21e6af5

2016-08-06T15:09:20

Add Xbox One controller GUIDs to the XInput filter in the DirectInput joystick driver. The Windows 10 Anniversary Update (1607) breaks the method uses that SDL uses to detect XInput devices. That is, on Windows 10 Anniversary Update, it is no longer possible to query RAWINPUT for HID devices, and check for "IG_" in the device name. Presumably, this will be fixed in the future. This patch works around the issue by adding the Xbox One controller series to the well-known device list. This skips the more expensive RAWINPUT check for those devices, and causes them to be detected as XInput devices once again.

9b4db2b8

2016-04-12T18:11:36

Patched to compile on various platforms.

c61675dc

2016-04-12T16:45:10

threads: Move SDL's own thread creation to a new internal API. This allows us to set an explicit stack size (overriding the system default and the global hint an app might have set), and remove all the macro salsa for dealing with _beginthreadex and such, as internal threads always set those to NULL anyhow. I've taken some guesses on reasonable (and tiny!) stack sizes for our internal threads, but some of these might turn out to be too small in practice and need an increase. Most of them are simple functions, though.

1c2beb21

2016-02-16T13:47:37

Allow using the game controller API with arcade sticks and other XInput devices

42065e78

2016-01-02T10:10:34

Updated copyright to 2016

dc804c0e

2015-11-14T21:29:14

WinRT: fixed build error in latest XInput code This change has also been tested as buildable + runnable on Win32 + MSVC 2015, 2013, 2012, and 2010. It may fix similar build errors (in XInput code) that are appearing in MingW builds (on buildbot).

a0c4b56f

2015-09-30T15:39:30

SDL - added new SDL_JoystickCurrentPowerLevel() API that returns the battery level of the selected joystick. Currently only implemented for XInput devices, other platforms are a TODO. CR: Sam

0e45984f

2015-06-21T17:33:46

Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().

f29de0d3

2015-06-11T12:04:57

Fixed bug 3005 - MOMO steering wheel not detected by SDL Joe Thompson This is a regression. The changes to fix #2460 cause the EnumJoysticksCallback() function to return without adding devices (Line 345 in SDL-0a2b6bc7005f\src\joystick\windows\SDL_dinputjoystick.c). Looking at dinput.h on my system, at least DI8DEVTYPE_DRIVING and DI8DEVTYPE_FLIGHT need to be added to the test. It might be better to check if (devtype == DI8DEVTYPE_SUPPLEMENTAL) rather than checking if it is NOT EQUAL to a long list of types. Or check if the device is already in the list.

e90f87ba

2015-05-28T01:08:33

Another attempt to get this to compile.

4add1694

2015-05-28T01:02:03

Patched to compile on MingW. (I think!)

58447b24

2015-05-28T00:54:52

Move tests from SDL_config higher up in Windows joystick/haptic code. Fixes Bugzilla #2932.

7f17e0ab

2015-05-27T10:29:43

Fixed detecting PS4 wired controller on Windows

2c4a6ea0

2015-05-26T06:27:46

Updated the copyright year to 2015

b72938c8

2015-04-20T12:22:44

Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.

3e1d3629

2015-04-15T21:29:55

Fixed typo in internal joystick documentation comments.

fe6c797c

2015-04-10T23:30:31

Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.

78026f54

2015-04-08T02:24:17

Patched to compile on Windows.

785618af

2015-04-08T02:14:59

DirectInput: ignore everything but joysticks and gamepads (thanks, Justin!). Fixes Bugzilla #2460.

162ef5ea

2015-03-24T13:52:01

Cleanups in the joystick code. Removed some redundant state and other confusions. Fixes Bugzilla #2738.

da843f6a

2015-03-11T21:14:21

Updated internal documentation comments.

b88ca1b4

2015-02-10T16:28:56

the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802

b48e54aa

2015-01-26T22:00:29

Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.

2b53ffc7

2015-01-16T23:07:10

Fixed wrong documentation in joystick implementation source.

70438be2

2014-12-03T10:55:23

WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!

9c398852

2014-11-22T22:20:40

Corrected header file documentation comment.

1b341f58

2014-10-15T15:50:35

WinRT build fix

24c86b55

2014-09-11T19:24:42

[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam

cd8f63f2

2014-07-07T13:21:54

Hopefully fixed Cygwin build

a2d5dd02

2014-07-07T13:19:53

Removed useless assert

1ee96bb9

2014-07-07T10:26:28

Fixed mingw64 build and warnings

b79e7f32

2014-07-03T15:39:55

Split the XInput and DirectInput code so Windows RT can use the existing XInput support.

52ec151f

2014-06-24T13:31:25

Fixed bug 2553 - Add support to all XInput devices This adds support for all XInput devices, exposed through the SDL joystick API. The button and axis reporting for XInput devices has been changed to match DirectInput and other platforms. The game controller xinput mapping has been updated so this change is seamless. There is a new hint, SDL_HINT_XINPUT_USE_OLD_JOYSTICK_MAPPING, for any applications that have hardcoded the old xinput button and axis set. This hint will be removed in SDL 2.1.

446d19c4

2014-06-14T23:31:23

Removed SDL_SYS_JoystickNeedsPolling(). It was simpler to just have the polling (actually: hotplug detection) functions return immediately if it's not an appropriate time to poll. Note that previously, if any joystick/controller was opened, we would poll every time anyhow, skipping this function.

da6d9a9f

2014-06-04T10:56:56

Added annotations to help code analysis tools CR: Bruce Dawson

3dcb451f

2014-04-09T21:29:19

Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.

c3c24a33

2014-03-31T10:38:26

Fixed the joystick side of XInput haptic detection on Windows 8

7eaf8997

2014-03-17T19:11:18

Fixed SDL_HapticOpenFromJoystick() with DirectInput devices.

754067db

2014-03-01T22:27:21

Added a FIXME.

7fa4eece

2014-03-01T22:27:13

Fixed a typo in a comment.

73936208

2014-03-01T20:59:43

Added some FIXMEs.

e42d46b4

2014-02-06T07:37:20

Wired up haptic hotplugging for Windows DirectInput/XInput code.

58edac3e

2014-02-02T00:53:27

090327e7

2013-12-09T16:03:18

Implemented the Dynamic API magic.

f848adff

2013-11-29T10:06:08

Improve Android pause/resume behavior.

7e1289af

2013-11-24T23:56:17

Make internal SDL sources include SDL_internal.h instead of SDL_config.h The new header will include SDL_config.h, but allows for other global stuff.

5e74299a

2013-10-20T15:40:20

Fix adding of XInput devices (thanks, Mitchell!) Partially fixes Bugzilla #2126.

7ad441a3

2013-10-17T23:40:13

Fixed bug 2069 - Device addition/removal queries all USB devices rather than only HID devices. Andreas Ertelt SDL_dxjoystick.c is setting the classguid for device (dis)connect events to USB Devices in general: dbh.dbcc_classguid = GUID_DEVINTERFACE_USB_DEVICE; Wouldn't it make more sense to have it just subscribe to Hid device events? This would mean less meaningless events reaching the application.

12ca3ce3

2013-10-17T23:02:29

Fixed building using MinGW Our SDL_windows.h needed to be included before anything else so UNICODE is defined.

f79fc33a

2013-08-29T08:29:21

Christoph Mallon: Remove pointless if (x) before SDL_free(x)

257cef30

2013-08-28T22:09:17

Change order we enumerate Windows joysticks. Make it so XInput devices are listed before DirectInput devices, and that the XInput devices are sorted by userid in ascending numeric order (so device 0 comes first).

ea4350d8

2013-08-28T22:07:54

Don't corrupt XInput device state during SDL_SYS_JoystickClose().

aa652114

2013-08-28T17:17:21

Make XInput joystick names match the numbers on the device. (And how the Haptic code already names them.)

4b255c63

2013-08-28T16:43:47

Reworked XInput and DirectInput joystick code. Now multiple XInput controllers map correctly to device indexes instead of grabbing the first available userid, and are completely separated out from DirectInput. Also, the hardcoded limitation on number of DirectInput devices is gone. I don't expect there to really ever be more than eight joysticks plugged into a machine, but it was a leftover limitation for a static array we didn't actually use anymore. Fixes Bugzilla #1984. (etc?)

c89e0469

2013-08-28T16:35:32

Better XInput detection code for DirectInput device enumeration. This code is way faster than the Wbem code, and less ugly.

cd27a1ef

2013-08-21T12:12:04

Fixed compiling on old versions of the DirectX SDK

9faefccd

2013-08-21T10:32:04

SDL - detect that you tried to open a gamecontroller in xinput mode and failed, then re-get the mapping for the dinput variant you did open (and most likely now just fail the open) CR: SamL

05d8c2dc

2013-08-21T10:31:44

Fix SDL xinput code to work at all when xinput has devices at high indexes but no device connected at lower index, for instance 0->disconnected, 1->wireles, 2->wired. Previously the SDL code assumed the indexes were always used up in order which is not true at all and lead to a bunch of failure cases where controllers would go unrecognized. This entire function is kind of a mess and more complicated than needed, but I don't want to refactor it too heavily tonight. May look at improving how the indexes are assigned more significanly later. The way it handles not finding a valid "gamepad" type device is also super broken, it leaves in place the xinput bindings but opens the controller with dinput and ends up with completely wrong mappings, not solving that now, but fixing the bug where we'd very frequently not find a controller due to gaps in assigned player numbers should mostly avoid it.

552b04c5

2013-08-20T20:34:40

More non C89 compliant comments

dad42067

2013-08-12T11:13:50

Fixes #2022, do not resume on Android when surfaceChanged If the app is in landscape mode and the user presses the power button, a pause is followed immediately by a surfaceChanged event because the lock screen is shown in portrait mode. This triggers a "false" resume. So, we just pause and resume following the onWindowFocusChanged events. Also, wait for SDL_APP_WILLENTERBACKGROUND and SDL_APP_DIDENTERBACKGROUND before blocking the event pump.

1ad936eb

2013-08-11T19:56:43

Fixed bug 2027 - Full-screen appears to be broken - hang in SDL_DestroyWindow() Rainer Deyke I'm running Linux Mint 15 with the Cinnamon window manager. SDL_DestroyWindow consistently locks up for me when the window if fullscreen.

kc3-lang/SDL/src/joystick/windows

src/joystick/windows

Log