|
b06aedb8
|
2023-05-02T14:15:55
|
|
scanner: allow for a zero terminated string as keymap
As the documentation for xkb_keymap_new_from_buffer() states, the "input string
does not have to be zero-terminated". The actual implementation however failed
with "unrecognized token/syntax error" when it encountered a null byte.
Fix this by allowing a null byte at the last position of the buffer. Anything
else is likely a client error anyway.
Fixes #307
|
|
5b5b67f2
|
2023-05-01T22:30:41
|
|
Add support for modmap None (#291)
Unlike current xkbcommon, X11’s xkbcomp allows to remove entries in
the modifiers’ map using “modifier_map None { … }”.
“None” is translated to the special value “XkbNoModifier” defined in
“X11/extensions/XKB.h”. Then it relies on the fact that in "CopyModMapDef",
the following code:
1U << entry->modifier
ends up being zero when “entry->modifier” is “XkbNoModifier” (i.e. 0xFF).
Indeed, it relies on the overflow behaviour of the left shift, which in
practice resolves to use only the 5 low bits of the shift amount, i.e.
0x1F here. Then the result of “1U << 0xFF” is cast to “char”, i.e. 0.
This is a good trick but too magical, so in libxkbcommon we will use
an explicit test against our new constant XKB_MOD_NONE.
|
|
bd79a960
|
2023-04-11T23:24:47
|
|
Possible fix for non-MSVC windows compilers
`_MSC_VER` is specific to MSVC, but there can be other compilers targeting
windows. Hopefully they do define `_WIN32`, so let's use that.
Refs: https://github.com/xkbcommon/libxkbcommon/issues/305
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
4d829390
|
2022-09-24T10:37:06
|
|
utils: move some MSVC compat stuff to common place
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
f9858bf5
|
2022-09-24T10:27:51
|
|
test: move mkdir & mkdtemp calls to common place and fix them on MSVC
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
25367130
|
2022-04-27T18:45:54
|
|
Remove bogus euro sign entry from keysymtab
Not sure what it's doing here, but converting "€" to a keysym
doesn't work with this entry. 0x13a4 doesn't appear in
xkbcommon-keysyms.h. 0x20ac is the keysym documented in the
header (and it's the last entry in the table).
It's been in the table since it was introduced in e0524296d2e0
("Add API for getting unicode representation of a keysym").
Co-authored-by: Simon Ser <contact@emersion.fr>
|
|
b064b609
|
2022-05-14T01:11:32
|
|
Do not clear sibling entries when override.
lokid and hikid actually stores the sibling to current node, which
should not be cleared when override. This would break the sequence with
a common prefix when override another.
Fix #286
Signed-off-by: Weng Xuetian <wengxt@gmail.com>
|
|
1c8ef9e0
|
2022-01-24T11:13:06
|
|
test: add test for variant inheritance of ISO 639/3166 codes
See efa99624320f54e6e1ff24e4c4b1fcecdfba43d5
|
|
efa99624
|
2022-01-24T02:16:08
|
|
Variants should inherit iso639, iso3166 and brief from parent layout if omitted (#266)
|
|
9b05825e
|
2022-01-20T13:08:36
|
|
registry: skip over invalid ISO639 or ISO3166 entries
If the XML file is somehow off, don't load entries that are against the spec.
|
|
34ef11d9
|
2022-01-20T14:17:50
|
|
test: show the tool exit status on failure
We already do so for the non-successful cases, let's do this here too so we know
whether it was a signal or a normal exit.
|
|
8507af73
|
2021-05-22T20:11:10
|
|
test/tool-option-parsing: don't depend on build prefix
Fixes: https://github.com/xkbcommon/libxkbcommon/issues/244
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
98f07da8
|
2021-05-22T20:07:06
|
|
test/compose: add tests for xkb_compose_table_new_from_locale lookup
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
5b1b2f75
|
2021-05-22T20:00:24
|
|
test/compose: clean up after a setenv
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
e2465c2a
|
2021-05-22T19:55:04
|
|
tests/data: add files needed to fully test compose
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
09ac27f7
|
2021-05-22T19:51:02
|
|
ignore: remove no longer relevant gitignore files
These were relevant for the autoconf build but now we're meson only.
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
68dddd41
|
2021-04-22T00:37:03
|
|
keysym: fix underflow in binary searches
This is hit when passing an empty string and XKB_KEYSYM_CASE_INSENSITIVE
to xkb_keysym_from_name currently if `(lo + hi) / 2` is 0 and `cmp < 0`,
causing mid to underflow and the the array access into name_to_keysym on
the next iteration of the loop to be out of bounds .
We *would* use ssize_t here as it is the appropriate type, but windows
unfortunately does not define it.
|
|
15576683
|
2021-04-21T09:02:40
|
|
test: allow skipping errors in certain conditions
Add a skipError test function that can analyse rc, stdout, stderr to skip a test
even when we expect an error. We use that to skip if we couldn't find a keyboard
in the interactive-evdev test.
Fixes #235
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
f60bdb16
|
2021-04-20T12:21:28
|
|
test: add extra info to the layout-tester --help output
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
be520ef9
|
2021-04-16T09:24:20
|
|
test: print the layout-tester progress bar to stdout by default
tqdm prints to stderr by default but we're using that for failed keymap
compiles (which are the ones that really matter). Plus, whether we're using tqdm
is dependent on isatty(sys.stdout) anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
efa58050
|
2021-04-16T07:42:27
|
|
test: add an LVO argument to the XKB layout tester
Slightly easier to debug if we can have it only parse one single layout.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
a955dca3
|
2021-04-15T11:07:33
|
|
test: print the compiled keymaps to a given directory
With --keymap-output-dir, the given directory will contain a list of files named
after the layout + variant ('us', 'us(euro)', ...) that contain the keymaps for
each variant + option combination compiled.
This is still a lot, but better to sift through hundreds of keymaps than tens of
thousands.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
1cae2500
|
2021-04-15T10:39:05
|
|
test: rework the output for the xkeyboard-config layout tester
The previous output is largely unusable. The result in the CI test runs is a 6GB
file with every compiled keymap in it and while we can grep for ERROR, it's not
particularly useful.
Let's change this and print out YAML instead - that can be machine-processed.
This patch adds a new parent class that prints itself in YAML format,
the tool invocations are child classes of that class. The result looks like this:
Example output:
- rmlvo: ["evdev", "pc105", "us", "haw", "grp:rwin_switch"]
cmd: "xkbcli-compile-keymap --verbose --rules evdev --model pc105 --layout us --variant haw --options grp:rwin_switch"
status: 0
- rmlvo: ["evdev", "pc105", "us", "foo", ""]
cmd: "xkbcli-compile-keymap --verbose --rules evdev --model pc105 --layout us --variant foo"
status: 1
error: "failed to compile keymap"
Special status codes are: 99 for "unrecognized keysym" and 90 for "Cannot open
display" in the setxkbmap case.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
44e8d4b0
|
2021-04-15T08:57:51
|
|
test: add proper --verbose handling to the xkeyboard-config tester
Instead of defaulting to verbose on/off depending on isatty, make it an
argument instead.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
8cd688c0
|
2021-04-01T22:07:28
|
|
keysym: avoid strtoul in xkb_keysym_from_name
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
1c0e28ad
|
2021-03-30T19:11:59
|
|
keysym: properly handle overflow in 0x keysym names
Relatedly, strtoul allows a lot of unwanted stuff (spaces, +/- sign,
thousand seperators), we really ought not use it. But that's for another
time.
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
d1726527
|
2021-03-30T08:08:58
|
|
test: move an assert up to before the strlen() use
../../../test/keysym.c:80:24: warning: Null pointer passed to 1st parameter
expecting 'nonnull' [core.NonNullParamChecker]
(unsigned) strlen(expected));
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
694b8f71
|
2021-03-18T11:13:43
|
|
test: fix missing va_end in case of test failures
Found by coverity
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
0abd430e
|
2021-02-22T12:54:15
|
|
test: add a keysym tester
A simple script that creates a new layout with the given keysym replacing TLDE.
Then we compile a keymap and search for the keysym being assigned to TLDE and
bail if that fails.
The list of keysyms is manually maintained but we only need to add one or two to
spot-check whenever the xorgproto is updated.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
069777f4
|
2021-01-22T08:18:13
|
|
test: fix interactive evdev test invocation
rmlvos is the parent list which then fails during a list join because, well,
it's a list of lists.
Fixes #206
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
d5e3695e
|
2021-01-22T08:05:09
|
|
test: fill in srcdir/builddir when not set in the environment
Makes this test easier to run from the commandline. Where either of top_srcdir
or top_builddir isn't set, fill them in from the CWD or fail otherwise.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
fbf087ea
|
2020-11-23T19:51:04
|
|
keymap-dump: follow xkbcomp in printing affect=both in pointer actions
It is equivalent to nothing but good to match up.
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
95f8ff83
|
2020-11-23T18:35:27
|
|
test/data: update host.xkb to match keymap-dump style
This is needed for fixing the x11comp test.
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
6268ba1c
|
2020-10-19T11:51:27
|
|
test: catch unrecognized keysyms in the xkeyboard-config test
Prompted by
https://gitlab.freedesktop.org/xkeyboard-config/xkeyboard-config/-/merge_requests/127
We run the keymap tool with --verbose which will print the messages from the
compiler to the log file as well. And then we can search for the warning
regarding an unrecognized keysym and fail our test based on that.
|
|
afdc9cee
|
2020-10-19T10:49:37
|
|
xkbcomp: where a keysym cannot be resolved, set it to NoSymbol
Where resolve_keysym fails we warn but use the otherwise uninitialized variable
as our keysym. That later ends up in the keymap as random garbage hex value.
Simplest test case, set this in the 'us' keymap:
key <TLDE> { [ xyz ] };
And without this patch we get random garbage:
./build/xkbcli-compile-keymap --layout us | grep TLDE:
key <TLDE> { [ 0x018a5cf0 ] };
With this patch, we now get NoSymbol:
./build/xkbcli-compile-keymap --layout us | grep TLDE:
key <TLDE> { [ NoSymbol ] };
|
|
6178924f
|
2020-09-07T12:27:26
|
|
test/tool-option-parsing: skip testing of disabled tools
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
c621319e
|
2020-09-07T10:36:18
|
|
test/tool-option-parsing: switch from pytest to unittest
For me, installing pytest for libxkbcommon is a bit problematic, so I
end up skipping it which is not great.
Switch to unittest which is built in to Python. It's not as nice as
pytest but good enough in this case.
Note: I was too lazy to switch the plain asserts to unittest
assertions...
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
c8f309a2
|
2020-09-07T11:10:19
|
|
test/tool-option-parsing: keep isolated by using our own test data
Make it possible to run the test on all machines.
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
13745014
|
2020-09-07T19:24:12
|
|
test: include unstd.h in the registry test to cut down the MacOS warnings
mkdtmp, rmdir and unlink are in unstd.h on MacOS. Since including that it
doesn't hurt us on Linux, let's do it without ifdefs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
534e54f6
|
2020-09-07T11:38:00
|
|
test/data: add rule registry files
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
1c352199
|
2020-09-07T11:35:22
|
|
test/data: sync from xkeyboard-config 2.30
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
461d7278
|
2020-09-07T11:15:43
|
|
test/data: change quartz.xkb from CRLF to LF
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
850ba7e6
|
2020-09-07T08:22:32
|
|
test: fix the xkbcli --version test
Fixes https://github.com/xkbcommon/libxkbcommon/issues/185
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
d7b39f6f
|
2020-07-10T08:50:02
|
|
Add /etc/xkb as extra lookup path for system data files
This completes the usual triplet of configuration locations available for most
processes:
- vendor-provided data files in /usr/share/X11/xkb
- system-specific data files in /etc/xkb
- user-specific data files in $XDG_CONFIG_HOME/xkb
The default lookup order user, system, vendor, just like everything else that
uses these conventions.
For include directives in rules files, the '%E' resolves to that path.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
9b9c5f20
|
2020-07-29T08:13:14
|
|
test: fix the xkeyboard-config test
'xkbcli compile-keymap' doesn't work unless we ninja install first. But for a
test that's to be run from the test directory, that's not a useful option so
let's call the binary directly. The script adds the meson builddir to the PATH
anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
03ecaa6b
|
2020-07-27T11:26:51
|
|
test: ignore the real XDG_CONFIG_HOME during tests
Let's not have our tests fail if the user has an incompatible
$XDG_CONFIG_HOME/xkb directory.
libxkbcommon has fallbacks when XDG_CONFIG_HOME isn't set so we need to override
this with a real directory instead of just unsetting it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
fcc6b28f
|
2020-07-27T11:57:24
|
|
tools/interactive-evdev: fixup 64bff65
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
0df23ea8
|
2020-07-25T16:38:43
|
|
test/tool-option-parsing: remove --kccgst test, it's private for now
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
608e9361
|
2020-07-25T16:30:39
|
|
tools: run test-tool-option-parsing.py like a regular test
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
29e80e7b
|
2020-07-08T13:30:47
|
|
tools: install our tools as xkbcli subcommands
The xkbcli tool usage help is ifdef'd out where the tool isn't built but the
man page always includes all tools. Easier that way.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
f0b1441f
|
2020-07-23T08:49:54
|
|
test: make the symbols-leak-test executable
Python leaks like crazy when run under valgrind. But if we make the script
executable **and** it has uses the env invocation (i.e. #!/usr/bin/env python3),
the leaks disappear. This is not the case for a shebang of /usr/bin/python3.
Why exactly this is the case I'm not sure but executables we plan to run
should have the exec bit set. So this is a janitor patch with the nice side
effect of fixing our valgrind runs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
a4901662
|
2020-07-22T20:02:25
|
|
PACKAING: remove bash
Converted to Python.
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
fa300b24
|
2020-07-22T11:47:15
|
|
test: fix Windows CI by rewriting symbols-leak-test from bash to python
The CI started installing some wrapper instead of a real bash which is
what gets found.
See:
https://github.com/actions/virtual-environments/pull/1081
Given meson is written in python, it should always be available
hopefully.
Disabled valgrind wrapper for now because it now also applies to the
python interpreter which leaks like a sieve.
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
41a7c975
|
2020-07-10T14:57:57
|
|
Add asprintf_safe helper function
We only ever care about whether we error out or not, so let's wrap this into
something more sane.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
afb26e7d
|
2020-05-12T14:09:50
|
|
Add libxkbregistry to query available RMLVO
This library is the replacement for clients parsing evdev.xml directly.
Instead, they should use the API here so that in the future we may even
be able to swap evdev.xml for a more suitable data format.
The library parses through evdev.xml (using libxml2) and - if requested -
through evdev.extras.xml as well. The merge approach is optimised for
the default case where we have a system-installed rules XML and another file in
$XDG_CONFIG_DIR that adds a few entries. We load the system file first, then
append any custom ones to that. It's not possible to overwrite the MLVO list
provided by the system files - if you want to do that, get the change upstream.
XML validation is handled through the DTD itself which means we only need to
check for a nonempty name, everything else the DTD validation should complain
about.
The logging system is effectively identical to xkbcommon.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
fe886133
|
2020-06-23T11:07:53
|
|
utils: add streq_null() for streq that allows NULL values
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
9b1b0c57
|
2020-06-16T10:34:07
|
|
Add a snprintf_safe() helper function
Returns true on success or false on error _or_ truncation. Since truncation is
almost always an error anyway, we might as well make this easier to check.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
43b9d092
|
2020-07-01T07:58:35
|
|
test: fix the xkeyboard-config test for the prefixed tool name
Regression introduced in 362130debb5d90d77f0d4f7549880b5f9699f647
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
314b6486
|
2020-06-24T08:30:50
|
|
test: drop some now-obsolete functions
These were moved to tools/tools-common.c and now that all tools are switched
over, they're no longer needed.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
3adbe54e
|
2020-06-23T16:20:08
|
|
tools: move the remaining tools from test to here
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
f525f9f0
|
2020-06-23T16:25:50
|
|
test: disentangle interactive-wayland from the test headers
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
1326d5ad
|
2020-06-23T16:23:24
|
|
test: untangle interactive-x11 from the test headers
Use the new tools headers and create a custom internal lib for the x11 tool.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
c09bf363
|
2020-06-23T14:01:48
|
|
test: untangle interactive-evdev from the test headers
Move (sometimes duplicate) the required bits into new shared files
tools-common.(c|h) that are compiled into the internal tools library. Rename the
test_foo() functions to tools_foo() and in one case just copy the code of the
keymap compile function to the tool.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
2eb5d2c8
|
2020-06-23T16:06:10
|
|
test: simplify error handling in interactive-evdev
Passing -errno around and having separate labels depending on failure types is
superfluous here. All the unref calls can handle NULL and nothing cares about
errno once we're out of the immediate scope. So let's simplify this and deal
with 0 and 1 only.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
ec2bbe59
|
2020-06-22T13:07:46
|
|
Move the various tools to a tools/ directory
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
725a3198
|
2020-06-22T13:08:51
|
|
test: how-to-type: prefer local headers over system ones
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
928771ed
|
2020-06-22T13:17:47
|
|
test: untangle rmlvo-to-kccgst from the test headers
Using test helpers to init the context gives it fairly specific behavior; unless
the user sets the right environment variables and/or calls it from the right
PWD, it may or may not include the test data.
Let's drop this behavior, make it a default tool to compile a keymap. If there
is a specific need to modify the include paths, we can add this later.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
e5d4056e
|
2020-06-22T13:04:43
|
|
test: untangle print-compiled-keymap from the test headers
Commit 16c84cdd819db516fff089c76b99248fb7dd4e8c removed the getopt handling for
RMLVO arguments, so now this tool only takes a keymap file and compiles it.
Using test helpers to init the context gives it fairly specific behavior; unless
the user sets the right environment variables and/or calls it from the right
PWD, it may or may not include the test data.
Let's drop this behavior, make it a default tool to compile a keymap. If there
is a specific need to modify the include paths, we can add this later.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
7d1aefdd
|
2020-06-22T13:01:41
|
|
test: simplify an exit path
The unref() functions take NULL as argument, so we don't need different labels
for every possible exit path.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
860cfc03
|
2020-04-05T00:07:57
|
|
keymap: don't forget about fallback mappings in xkb_keymap_key_get_mods_for_level()
If the active set of modifiers doesn't match any explicit entry of the
key type, the resulting level is 0 (i.e. Level 1). Some key types don't
explicitly map Level 1, taking advantage of this fallback.
Previously, xkb_keymap_key_get_mods_for_level didn't consider this, and
only reported masks for explicit mappings. But this causes some glaring
omissions, like matching "a" in the "us" keymap returning not results.
Since every mask which isn't explicitly mapped falls back to 0, we can't
return the all. Almost always the best choice for this is the empty
mask, so return that, when applicable.
Fixes https://github.com/xkbcommon/libxkbcommon/issues/140.
Reported-by: https://github.com/AliKet
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
0f1cae0c
|
2020-03-25T08:43:41
|
|
test: use flag instead of hardcoded value in examples
|
|
8a1709a4
|
2020-03-21T12:56:13
|
|
test/how-to-type: some code fixes/improvements
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
188a1c79
|
2020-03-20T18:29:03
|
|
test: add "how to type" demo program
The program takes a unicode codepoint and an RMLVO and prints out all
key + modifier combinations that would result in that codepoint.
The program was written to exercise the new
xkb_keymap_key_get_mods_for_level() function. It's handy and can be
extended in several ways, but enough for now.
Example:
$ ./build/how-to-type -l us,il,ru 0x41 | column -ts $'\t'
keysym: A (0x41)
KEYCODE KEY NAME LAYOUT# LAYOUT NAME LEVEL# MODIFIERS
38 AC01 1 English (US) 2 [ Shift ]
38 AC01 1 English (US) 2 [ Lock ]
38 AC01 2 Hebrew 2 [ Shift ]
38 AC01 2 Hebrew 2 [ Lock ]
$ ./build/how-to-type -l de -v neo 0x3b6 | column -ts $'\t'
keysym: Greek_zeta (0x7e6)
KEYCODE KEY NAME LAYOUT# LAYOUT NAME LEVEL# MODIFIERS
56 AB05 1 German (Neo 2) 4 [ Shift Mod5 ]
56 AB05 1 German (Neo 2) 4 [ Shift Mod2 Mod3 Mod5 ]
56 AB05 1 German (Neo 2) 4 [ Shift Lock Mod5 ]
56 AB05 1 German (Neo 2) 4 [ Lock Mod2 Mod3 Mod5 ]
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
d92a248c
|
2020-02-05T17:42:06
|
|
API to query modifier set required to type a keysym
The new API is useful to implement features like auto-type and
desktop automation. Since the inputs for these features is usually
specified in terms of the symbols that need to be typed, the
implementation needs to be able to invert the keycode->keysym
transformation and produce a sequence of keycodes that can be used
to type the requested character(s).
|
|
0345aba0
|
2020-02-12T23:44:42
|
|
Support translation Unicode codepoints to keysyms
In order to support features like auto-type and UI automation, the
relevant tools need to be able to invert the keycode->keysym->text
transformation. In order to facilitate that, a new API was added.
It allows querying the keysyms that correspond to particular Unicode
codepoints. For all practical purposes, it can be thought of as an
inverse of xkb_keysym_to_utf32().
|
|
f1186acf
|
2019-08-05T15:53:04
|
|
MSVC: Provide implementations of [un]setenv()
Reference:
https://docs.microsoft.com/en-us/cpp/c-runtime-library/reference/putenv-s-wputenv-s
|
|
abb2f9d9
|
2019-08-05T15:44:33
|
|
MSVC: Provide implementations of test_{dis,en}able_stdin_echo
This provides implementations of the test_enable_stdin_echo and
test_disable_stdin_echo which do not require <termios.h>, which is
not available on Windows.
|
|
5354dee2
|
2019-08-05T13:52:18
|
|
MSVC: Use <io.h> as an alternative for <unistd.h>
Only the input/output functions from <unistd.h> options are used, so
using <io.h> when building with MSVC should be enough. The inclusion
of the header in context-priv.c does not seem to be needed (tested
on GNU/Linux) and so it is removed.
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
faac4ba7
|
2019-12-28T15:52:20
|
|
test/data: ensure files are checked out with LF, not CRLF
The tests stringcomp and buffercomp do binary comparison on some files;
if the files are changed to CRLF on checkout, the tests fail.
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
d1e39c11
|
2019-12-28T14:11:27
|
|
test/atom: use correct format specifier for size_t
From MSVC:
test\atom.c(98): note: consider using '%zu' in the format string
test\atom.c(98): warning C4477: 'fprintf' : format string '%lu' requires an argument of type 'unsigned long', but variadic argument 1 has type 'size_t'
test\atom.c(100): note: consider using '%zu' in the format string
test\atom.c(100): warning C4477: 'fprintf' : format string '%lu' requires an argument of type 'unsigned long', but variadic argument 1 has type 'size_t'
test\atom.c(114): note: consider using '%zu' in the format string
test\atom.c(114): warning C4477: 'fprintf' : format string '%lu' requires an argument of type 'unsigned long', but variadic argument 1 has type 'size_t'
test\atom.c(128): note: consider using '%zu' in the format string
test\atom.c(128): warning C4477: 'fprintf' : format string '%lu' requires an argument of type 'unsigned long', but variadic argument 1 has type 'size_t'
test\atom.c(130): note: consider using '%zu' in the format string
test\atom.c(130): warning C4477: 'fprintf' : format string '%lu' requires an argument of type 'unsigned long', but variadic argument 1 has type 'size_t'
test\atom.c(137): note: consider using '%zu' in the format string
test\atom.c(137): warning C4477: 'fprintf' : format string '%lu' requires an argument of type 'unsigned long', but variadic argument 2 has type 'size_t'
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
da4a90c1
|
2019-12-28T13:49:40
|
|
Open files in binary mode
This turns off some misfeatures on Windows, and does nothing on POSIX.
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
fe417d84
|
2019-12-28T13:40:38
|
|
test/common: avoid double // in path
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
eb23982c
|
2019-12-28T13:32:02
|
|
test/common: simplify test_get_path()
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
f967d46b
|
2019-12-27T15:47:15
|
|
test/context: use a more portable directory-exists check
MSVC doesn't have opendir/closedir.
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
670566f0
|
2019-12-27T15:03:10
|
|
Only add GCC diagnostic pragmas when compiler is GCC compatible
Avoid "unknown pragma" warnings on other compilers.
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
40aab05e
|
2019-12-27T13:03:20
|
|
build: include config.h manually
Previously we included it with an `-include` compiler directive. But
that's not portable. And it's better to be explicit anyway.
Every .c file should have `include "config.h"` first thing.
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
ca033a29
|
2019-09-03T11:23:14
|
|
rules: add include statements to rules files
The majority use-case for extending XKB on a machine is to override one or a
few keys with custom keycodes, not to define whole layouts.
Previously, we relied on the rules file to be a single file, making it hard to
extend. libxkbcommon parses $XDG_CONFIG_HOME/xkb/ but that only works as long
as there is a rule that matches the user-specified RMLVO. This works for MLV
but not for options which don't have a wildcard defined. Users have to copy
the whole rules file and then work from there - not something easy to extend
and maintain.
This patch adds a new ! include directive to rules files that allows including
another file. The file path must be without quotes and may not start with the
literal "include". Two directives are supported, %H to $HOME and %S for the
system-installed rules directory (usually /usr/share/X11/xkb/rules).
A user would typically use a custom rules file like this:
! option = symbols
custom:foo = +custom(foo)
custom:bar = +custom(baz)
! include %S/evdev
Where the above defines the two options and then includes the system-installed
evdev rule. Since most current implementations default to loading the "evdev"
ruleset, it's best to name this $XDG_CONFIG_HOME/xkb/rules/evdev, but any
valid name is allowed.
The include functionally replaces the line with the content of the included
file which means the behavior of rules files is maintained. Specifically,
custom options must be defined before including another file because the first
match usually wins. In other words, the following ruleset will not assign
my_model as one would expect:
! include %S/evdev
! model = symbols
my_model = +custom(foo)
The default evdev ruleset has wildcards for model and those match before the
my_model is hit.
The actual resolved components need only be in one of the XKB lookup
directories, e.g. for the example above:
$ cat $XDG_CONFIG_HOME/xkb/symbols/custom
partial alphanumeric_keys
xkb_symbols "foo" {
key <TLDE> { [ VoidSymbol ] };
};
partial alphanumeric_keys
xkb_symbols "baz" {
key <AB01> { [ k, K ] };
};
This can then be loaded with the XKB option "custom:foo,custom:bar".
The use of "custom" is just as an example, there are no naming requirements
beyond avoiding already-used ones. Also note the bar/baz above - the option
names don't have to match the component names.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
1de2f174
|
2019-11-13T13:42:11
|
|
test: let rmlvo-to-kccgst take long options like rmlvo-to-keymap
The short options were left for backwards compatibility.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
c79c8033
|
2019-11-09T21:25:01
|
|
atom: combine atom_intern() and atom_lookup()
Use an "add" bool parameter instead. This simplifies the code a bit.
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
2a615593
|
2019-11-08T22:40:13
|
|
test/atom: increase iteration count and print random seed on failure
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
2af474e8
|
2019-11-02T13:31:44
|
|
parser: get rid of "stealing" atoms
This requires (well, at least implemented by) casting away `const` which
is undefined behavior, and clang started to warn about it.
The micro optimization didn't save too many allocations, anyway.
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
31e561fc
|
2019-11-05T13:33:11
|
|
test: remove a superfluous string-is-null check
A few lines above we check path_rel[0], so any null pointer will blow up
before we get here.
Found by coverity
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
96ef14ac
|
2019-11-05T13:22:49
|
|
test: fix a potential memory leak
Found by coverity
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
3515ba19
|
2019-11-01T10:45:43
|
|
test: xkeyboard-config: bring back the progress bar
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
8f93e22a
|
2019-11-01T18:41:16
|
|
test: xkeyboard-config: invoke the python3 command (#120)
python3 is always python3, but python could be python2 in some cases. Or just
missing (e.g. RHEL8).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
0609073c
|
2019-11-01T11:09:16
|
|
test: xkeyboard-config: add missing variant tests
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
f4a0f738
|
2019-11-01T09:54:29
|
|
test: xkeyboard-config: use universal_newlines instead of decode
This way stdin/stdout of the process are opened in text mode and we don't need
manually decode.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
7832cc72
|
2019-10-30T12:03:48
|
|
test: xkeyboard-config: flake8 fixes
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
cd5a24aa
|
2019-10-30T11:22:49
|
|
test: xkeyboard-config: handle keyboard interrupts correctly
In python multiprocessing, each process needs to handle (and ignore) the
KeyboardInterrupt to avoid exception logging. This is a separate patch for
easier reviewing, the first hunks merely re-indent all of the
xkbcommontool/xkbcomp functions into a try/except KeyboardInterrupt block.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
9fc0cb87
|
2019-10-30T10:53:58
|
|
test: xkeyboard-config: print to stderr on failure, stdout otherwise
This is a change in behavior and requires any automated callers to adjust
accordingly. Still, much easier to get the errors that way rather than it
being mixed into a thousands-of-lines output file.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|