|
938cbd03
|
2019-06-11T21:53:35
|
|
net: handle urls with a colon after host but no port
Core git copes with URLs that have a colon after the port, but no actual
numeric value. eg `http://example.com:/foo.git` or
`http://example.com:`. That's horrible, but RFC 3986 says:
> URI producers and normalizers should omit the port component and its
> ":" delimiter if port is empty or if its value would be the same as
> that of the scheme's default.
Which indicates that they may and therefore we must accept it.
Test that we can handle URLs with a colon but no following port number.
|
|
|
ff7652c1
|
2019-06-11T17:05:27
|
|
Merge pull request #5098 from pks-t/pks/clar-data-driven
Data-driven tests
|
|
|
c6ab183e
|
2019-03-11T11:43:08
|
|
net: rename gitno_connection_data to git_net_url
"Connection data" is an imprecise and largely incorrect name; these
structures are actually parsed URLs. Provide a parser that takes a URL
string and produces a URL structure (if it is valid).
Separate the HTTP redirect handling logic from URL parsing, keeping a
`gitno_connection_data_handle_redirect` whose only job is redirect
handling logic and does not parse URLs itself.
|
|
|
7912db49
|
2019-03-14T10:35:03
|
|
ci: enable all proxy tests
|
|
|
3d11b6c5
|
2019-03-11T20:36:09
|
|
winhttp: support default credentials for proxies
We did not properly support default credentials for proxies, only for
destination servers. Refactor the credential handling to support sending
either username/password _or_ default credentials to either the proxy or
the destination server.
This actually shares the authentication logic between proxy servers and
destination servers. Due to copy/pasta drift over time, they had
diverged. Now they share a common logic which is: first, use
credentials specified in the URL (if there were any), treating empty
username and password (ie, "http://:@foo.com/") as default credentials,
for compatibility with git. Next, call the credential callbacks.
Finally, fallback to WinHTTP compatibility layers using built-in
authentication like we always have.
Allowing default credentials for proxies requires moving the security
level downgrade into the credential setting routines themselves.
We will update our security level to "high" by default which means that
we will never send default credentials without prompting. (A lower
setting, like the WinHTTP default of "medium" would allow WinHTTP to
handle credentials for us, despite what a user may have requested with
their structures.) Now we start with "high" and downgrade to "low" only
after a user has explicitly requested default credentials.
|
|
|
757411a0
|
2019-03-11T12:56:09
|
|
network: don't add arbitrary url rules
There's no reason a git repository couldn't be at the root of a server,
and URLs should have an implicit path of '/' when one is not specified.
|
|
cb28df20
|
2019-06-07T14:29:47
|
|
tests: checkout: fix symlink.git being created outside of sandbox
The function `populate_symlink_workdir` creates a new
"symlink.git" repository with a relative path "../symlink.git".
As the current working directory is the sandbox, the new
repository will be created just outside of the sandbox.
Fix this by using `clar_sandbox_path`.
|
|
|
1f47efc4
|
2019-06-07T14:20:54
|
|
tests: object: consolidate cache tests
The object::cache test module has two tests that do nearly the
same thing: given a cache limit, load a certain set of objects
and verify if those objects have been cached or not.
Convert those tests to the new data-driven initializers to
demonstrate how these are to be used. Furthermore, add some
additional test data. This conversion is mainly done to show this
new facility.
|
|
|
394951ad
|
2019-06-07T14:11:29
|
|
tests: allow for simple data-driven tests
Right now, we're not able to use data-driven tests at all. E.g.
given a set of tests which we'd like to repeat with different
test data, one has to hand-write any outer loop that iterates
over the test data and then call each of the test functions. Next
to being bothersome, this also has the downside that error
reporting is quite lacking, as one never knows which test data
actually produced failures.
So let's implement the ability to re-run complete test modules
with changing test data. To retain backwards compatibility and
enable trivial addition of new runs with changed test data, we
simply extend clar's generate.py. Instead of scanning for a
single `_initialize` function, each test module may now implement
multiple `_initialize_foo` functions. The generated test harness
will then run all test functions for each of the provided
initializer functions, making it possible to provide different
test data inside of each of the initializer functions. Example:
```
void test_git_example__initialize_with_nonbare_repo(void)
{
g_repo = cl_git_sandbox_init("testrepo");
}
void test_git_example__initialize_with_bare_repo(void)
{
g_repo = cl_git_sandbox_init("testrepo.git");
}
void test_git_example__cleanup(void)
{
cl_git_sandbox_cleanup();
}
void test_git_example__test1(void)
{
test1();
}
void test_git_example__test2(void)
{
test2();
}
```
Executing this test module will cause the following output:
```
$ ./libgit2_clar -sgit::example
git::example (with nonbare repo)..
git::example (with bare repo)..
```
|
|
|
e50d138e
|
2019-06-06T09:48:30
|
|
Merge pull request #5095 from pks-t/pks/ignore-escaped-trailing-space
ignore: handle escaped trailing whitespace
|
|
|
4de6eb5b
|
2019-06-06T09:47:43
|
|
Merge pull request #5074 from libgit2/ethomson/ignore_leading_slash
Ignore: only treat one leading slash as a root identifier
|
|
|
d81e7866
|
2019-06-06T14:11:44
|
|
ignore: handle escaped trailing whitespace
The gitignore's pattern format specifies that "Trailing spaces
are ignored unless they are quoted with backslash ("\")". We do
not honor this currently and will treat a pattern "foo\ " as if
it was "foo\" only and a pattern "foo\ \ " as "foo\ \".
Fix our code to handle those special cases and add tests to avoid
regressions.
|
|
|
e66a4eb3
|
2019-06-05T14:19:14
|
|
online tests: use gitlab for auth failures
GitHub recently changed their behavior from returning 401s for private
or nonexistent repositories on a clone to returning 404s. For our tests
that require an auth failure (and 401), move to GitLab to request a
missing repository. This lets us continue to test our auth failure
case, at least until they decide to mimic that decision.
|
|
|
4bcebe2c
|
2019-05-19T16:34:44
|
|
attr: ensure regular attr files can have whitespace
Unlike ignore files, gitattribute files can have flexible whitespace at
the beginning of the line. Ensure that by adding new ignore rules that
we have not impeded correct parsing of attribute files.
|
|
|
7d330541
|
2019-05-19T16:33:28
|
|
ignore: test that comments begin at position 0
Comments must have a '#' at the beginning of the line. For
compatibility with git, '#' after a whitespace is a literal part of the
filename.
|
|
|
19164901
|
2019-05-19T16:27:02
|
|
ignore: test that leading whitespace is significant
Ensure that leading whitespace is treated as being part of the filename,
eg ` foo` in an ignore file indicates that a file literally named ` foo`
is ignored.
|
|
|
add17435
|
2019-05-24T15:24:26
|
|
cache: fix cache eviction using deallocated key
When evicting cache entries, we first retrieve the object that is
to be evicted, delete the object and then finally delete the key
from the cache. In case where the cache eviction caused us to
free the cached object, though, its key will point to invalid
memory now when trying to remove it from the cache map. On my
system, this causes us to not properly remove the key from the
map, as its memory has been overwritten already and thus the key
lookup it will fail and we cannot delete it.
Fix this by only decrementing the refcount of the evictee after
we have removed it from our cache map. Add a test that caused a
segfault previous to that change.
|
|
|
23c5699e
|
2019-05-16T09:37:25
|
|
config: validate quoted section value
When we reach a whitespace after a section name, we assume that what
will follow will be a quoted subsection name. Pass the current position
of the line being parsed to the subsection parser, so that it can
validate that subsequent characters are additional whitespace or a
single quote.
Previously we would begin parsing after the section name, looking for
the first quotation mark. This allows invalid characters to embed
themselves between the end of the section name and the first quotation
mark, eg `[section foo "subsection"]`, which is illegal.
|
|
|
d97afb93
|
2019-05-22T11:45:45
|
|
Merge pull request #5060 from pks-t/pks/refspec-nested-globs
Loosen restriction on wildcard "*" refspecs
|
|
|
3d9e82fd
|
2019-05-21T14:59:55
|
|
Merge pull request #4935 from libgit2/ethomson/pcre
Use PCRE for our fallback regex engine when regcomp_l is unavailable
|
|
59647e1a
|
2019-04-08T15:54:25
|
|
remote: add callback to resolve URLs before connecting
Since libssh2 doesn't read host configuration from the config file,
this callback can be used to hand over URL resolving to the client
without touching the SSH implementation itself.
|
|
|
73a157e0
|
2019-05-19T13:29:45
|
|
ignore: test we can handle an ignore file with BOM
Ensure that we can read and parse an ignore file with a UTF8 BOM.
|
|
|
e6e6b60f
|
2019-05-19T12:32:06
|
|
ignore: test multiple leading slashes
|
|
|
09902985
|
2019-01-13T21:12:10
|
|
core::posix: skip some locale tests on win32
|
|
|
8877d7d3
|
2019-01-13T02:08:43
|
|
tests: regcomp: use proper character classes
The '[[:digit:]]' and '[[:alpha:]]' classes require double brackets, not
single.
|
|
|
ca1b07a2
|
2019-01-13T02:05:58
|
|
tests: regcomp: test that regex functions succeed
The regex functions return nonzero (not necessarily negative values) on
failure.
|
|
|
aea9a712
|
2018-03-02T15:12:14
|
|
tests: regcomp: assert character groups do match normal alphabet
In order to avoid us being unable to match characters which are part of
the normal US alphabet in certain weird languages, add two tests to
catch this behavior.
|
|
|
e207b2a2
|
2018-03-02T15:09:20
|
|
tests: regex: restructure setup of locales
In order to make it easier adding more locale-related tests, add a
generalized framework handling initial setup of languages as well as the
cleanup of them afterwards.
|
|
|
b055a6b5
|
2019-01-13T01:24:39
|
|
tests: regex: add test with LC_COLLATE being set
While we already have a test for `p_regexec` with `LC_CTYPE` being
modified, `regexec` also alters behavior as soon as `LC_COLLATE` is
being modified. Most importantly, `LC_COLLATE` changes the way how
ranges are interpreted to just not handling them at all. Thus, ensure
that either we use `regcomp_l` to avoid this, or that we've fallen back
to our builtin regex functionality which also behaves properly.
|
|
|
ad4ede91
|
2018-03-02T13:51:57
|
|
tests: fix p_regcomp test not checking return type
While the test asserts that the error value indcates a non-value, it is
actually never getting assigned to. Fix this.
|
|
|
02683b20
|
2019-01-12T23:06:39
|
|
regexec: prefix all regexec function calls with p_
Prefix all the calls to the the regexec family of functions with `p_`.
This allows us to swap out all the regular expression functions with our
own implementation. Move the declarations to `posix_regex.h` for
simpler inclusion.
|
|
|
c9f116f1
|
2019-05-12T22:06:00
|
|
Merge branch 'pr/5061'
|
|
|
7f562f2c
|
2019-05-12T11:00:31
|
|
Merge pull request #5057 from eaigner/merge-rebase-onto-name
rebase: orig_head and onto accessors
|
|
6990a492
|
2019-05-06T11:39:51
|
|
revwalk: fix memory leak in error handling
This is not implemented and should fail, but it should also not leak. To
allow the memory debugger to find leaks and fix this one we test this.
|
|
|
d55bb479
|
2019-04-26T15:59:49
|
|
git_revwalk_push_range: do not crash if range is missing
If someone passes just one ref (i.e. "master") and misses passing the
range we should be nice and return an error code instead of crashing.
|
|
e44110db
|
2019-03-20T12:28:45
|
|
Correctly write to missing locked global config
Opening a default config when ~/.gitconfig doesn't exist, locking it,
and attempting to write to it causes an assertion failure.
Treat non-existent global config file content as an empty string.
|
|
|
0c71e4cb
|
2019-04-26T10:38:02
|
|
refspec: fix transforming nested stars
When we transform a refspec with a component containing a glob, then
we simply copy over the component until the next separator from
the matching ref. E.g. if we have a ref "refs/heads/foo/bar" and
a refspec "refs/heads/*/bar:refs/remotes/origin/*/bar", we:
1. Copy over everything until hitting the glob from the <dst>
part: "refs/remotes/origin/".
2. Strip the common prefix of ref and <src> part until the glob,
which is "refs/heads/". This leaves us with a ref of "foo/bar".
3. Copy from the ref until the next "/" separator, resulting in
"refs/remotes/origin/foo".
4. Copy over the remaining part of the <dst> spec, which is
"bar": "refs/remotes/origin/foo/bar".
This worked just fine in a world where globs in refspecs were
restricted such that a globbing component may only contain a
single "*", only. But this restriction has been lifted, so that a
glob component may be nested between other characters, causing
the above algorithm to fail. Most notably the third step, where
we copy until hitting the next "/" separator, might result in a
wrong transformation. Given e.g. a ref "refs/gbranchg/head" and a
refspec "refs/g*g/head:refs/remotes/origin/*", we'd also be
copying the "g" between "branch" and "/" and end up with the
wrong transformed ref "refs/remotes/origin/branchg".
Instead of copying until the next component separator, we should
copy until we hit the pattern after the "*". So in the above
example, we'd copy until hitting the string "g/head".
|
|
|
51214b85
|
2019-04-26T10:15:49
|
|
refs: loosen restriction on wildcard "*" refspecs
In commit cd377f45c9 (refs: loosen restriction on wildcard "*"
refspecs, 2015-07-22) in git.git, the restrictions on wildcard
"*" refspecs has been loosened. While wildcards were previously
only allowed if the component is a single "*", this was changed
to also accept other patterns as part of the component.
We never adapted to that change and still reject any wildcard
patterns that aren't a single "*" only. Update our tests to
reflect the upstream change and adjust our own code accordingly.
|
|
|
9d651e05
|
2019-04-26T09:09:46
|
|
tests: network::refspecs: add missing assert when parsing refspec
|
|
|
e215f475
|
2019-04-21T21:36:36
|
|
rebase: orig_head and onto accessors
The rebase struct stores fields with information about the current
rebase process, which were not accessible via a public interface.
Accessors for getting the `orig_head` and `onto` branch
names and object ids have been added.
|
|
|
b3923cf7
|
2019-04-17T13:43:52
|
|
Merge pull request #5050 from libgit2/ethomson/windows_init_traversal
git_repository_init: stop traversing at windows root
|
|
|
45f24e78
|
2019-04-12T08:54:06
|
|
git_repository_init: stop traversing at windows root
Stop traversing the filesystem at the Windows directory root. We were
calculating the filesystem root for the given directory to create, and
walking up the filesystem hierarchy. We intended to stop when the
traversal path length is equal to the root path length (ie, stopping at
the root, since no path may be shorter than the root path).
However, on Windows, the root path may be specified in two different
ways, as either `Z:` or `Z:\`, where `Z:` is the current drive letter.
`git_path_dirname_r` returns the path _without_ a trailing slash, even
for the Windows root. As a result, during traversal, we need to test
that the traversal path is _less than or equal to_ the root path length
to determine if we've hit the root to ensure that we stop when our
traversal path is `Z:` and our calculated root path was `Z:\`.
|
|
|
ed959ca2
|
2019-04-16T12:36:24
|
|
Merge pull request #5027 from ddevault/master
patch_parse.c: Handle CRLF in parse_header_start
|
|
30c06b60
|
2019-03-22T23:56:10
|
|
patch_parse.c: Handle CRLF in parse_header_start
|
|
|
9d117e20
|
2019-04-05T10:22:46
|
|
ignore: treat paths with trailing "/" as directories
The function `git_ignore_path_is_ignored` is there to test the
ignore status of paths that need not necessarily exist inside of
a repository. This has the implication that for a given path, we
cannot always decide whether it references a directory or a file,
and we need to distinguish those cases because ignore rules may
treat those differently. E.g. given the following gitignore file:
*
!/**/
we'd only want to unignore directories, while keeping files
ignored. But still, calling `git_ignore_path_is_ignored("dir/")`
will say that this directory is ignored because it treats "dir/"
as a file path.
As said, the `is_ignored` function cannot always decide whether
the given path is a file or directory, and thus it may produce
wrong results in some cases. While this is unfixable in the
general case, we can do better when we are being passed a path
name with a trailing path separator (e.g. "dir/") and always
treat them as directories.
|
|
|
aeea1c46
|
2019-04-04T15:06:44
|
|
Merge pull request #4874 from tiennou/test/4615
Test that largefiles can be read through the tree API
|
|
|
80db2043
|
2019-04-04T14:16:44
|
|
Merge pull request #5034 from pks-t/pks/symlinked-user-config
Tests for symlinked user config
|
|
|
6bcb7357
|
2019-04-04T14:04:59
|
|
Merge pull request #5035 from pks-t/pks/diff-with-space-in-filenames
patch_parse: fix parsing addition/deletion of file with space
|
|
|
fb7614c0
|
2019-04-04T13:51:52
|
|
tests: test largefiles on win32
|
|
|
8cf3fd93
|
2019-03-29T11:23:29
|
|
tests: config: assure that we can read symlinked global configuration
According to reports, libgit2 is unable to read a global configuration
file that is simply a symlink to the real configuration. Write a
(succeeding) test that shows that libgit2 _is_ correctly able to do so.
|
|
|
b3ba2e71
|
2019-03-29T11:15:26
|
|
tests: config: verify that the global config is actually readable
While we do verify that we are able to open the global ".gitconfig" file
in config::global::open_global, we never verify that we it is in fact
readable. Do so by writing the global configuration file and verifying
that reading from it produces the expected values.
|
|
|
25c085e6
|
2019-03-29T11:41:42
|
|
tests: repo: verify that we can open repos with symlinked global config
We've got reports that users are unable to open repos when their global
configuration ("~/.gitconfig") is a symlink. Add a test to verify that
we are in fact able to do so as expected.
|
|
|
9d65360b
|
2019-03-29T12:30:37
|
|
tests: diff: test parsing diffs with a new file with spaces in its path
Add a test that verifies that we are able to parse patches which add a
new file that has spaces in its path.
|
|
|
fa4505e6
|
2019-03-29T11:30:29
|
|
tests: config: make sure to clean up after each test
The config::global test suite creates various different directories and
files which are being populated with pretend-global files.
Unfortunately, the tests do not clean up after themselves, which may
cause subsequent tests to fail due to cruft left behind.
Fix this by always removing created directories and their contents.
|
|
d87441f2
|
2019-03-20T13:24:07
|
|
ignore: move tests from status to attr ignore suite
|
|
|
b50e448b
|
2019-03-15T13:08:18
|
|
ignore: add additional test cases
|
|
|
e3d7bccb
|
2019-03-14T15:51:15
|
|
ignore: Do not match on prefix of negated patterns
Matching on the prefix of a negated pattern was triggering false
negatives on siblings of that pattern. e.g.
Given the .gitignore:
dir/*
!dir/sub1/sub2/**
The path `dir/a.text` would not be ignored.
|
|
bc74c53a
|
2019-03-14T09:59:27
|
|
Implement failing test for gitignore of complex subdirectory negation
When a directory's contents are ignored, and then a glob negation is made to a nested subdir, other subdirectories are now unignored
|
|
|
68729289
|
2019-02-25T09:25:34
|
|
Merge pull request #5000 from augfab/branch_lookup_all
Have git_branch_lookup accept GIT_BRANCH_ALL
|
|
0a25141e
|
2019-02-21T21:42:25
|
|
branch: add test for git_branch_lookup to accept GIT_BRANCH_ALL
|
|
|
0345a380
|
2019-02-22T14:39:08
|
|
p_fallocate: add a test for our implementation
|
|
|
a1ef995d
|
2019-02-21T10:33:30
|
|
indexer: use git_indexer_progress throughout
Update internal usage of `git_transfer_progress` to
`git_indexer_progreses`.
|
|
|
4069f924
|
2019-02-22T10:56:08
|
|
Merge pull request #4901 from pks-t/pks/uniform-map-api
High-level map APIs
|
|
|
554b3b9a
|
2019-02-21T10:31:21
|
|
Merge pull request #4996 from eaigner/master
Prevent reading out of bounds memory
|
|
|
966b9440
|
2019-02-21T08:30:22
|
|
tests: apply: verify that we correctly truncate the source buffer
Previously, we would fail to correctly truncate the source buffer
if the source has more than one line and ends with a non-newline
character. In the following call, we thus truncate the source
string in the middle of the second line. Without the bug fixed,
we would successfully apply the patch to the source and return
success. With the overflow being fixed, we should return an
error now.
|
|
6b3730d4
|
2019-02-16T19:55:30
|
|
Fix a memory leak in odb_otype_fast()
This change frees a copy of a cached object in odb_otype_fast().
|
|
|
bd66925a
|
2018-12-01T10:29:32
|
|
oidmap: remove legacy low-level interface
Remove the low-level interface that was exposing implementation details of
`git_oidmap` to callers. From now on, only the high-level functions shall be
used to retrieve or modify values of a map. Adjust remaining existing callers.
|
|
|
fdfabdc4
|
2018-12-01T09:49:10
|
|
strmap: remove legacy low-level interface
Remove the low-level interface that was exposing implementation details of
`git_strmap` to callers. From now on, only the high-level functions shall be
used to retrieve or modify values of a map. Adjust remaining existing callers.
|
|
|
18cf5698
|
2018-12-01T09:37:40
|
|
maps: provide high-level iteration interface
Currently, our headers need to leak some implementation details of maps due to
their direct use of indices in the implementation of their foreach macros. This
makes it impossible to completely hide the map structures away, and also makes
it impossible to include the khash implementation header in the C files of the
respective map only.
This is now being fixed by providing a high-level iteration interface
`map_iterate`, which takes as inputs the map that shall be iterated over, an
iterator as well as the locations where keys and values shall be put into. For
simplicity's sake, the iterator is a simple `size_t` that shall initialized to
`0` on the first call. All existing foreach macros are then adjusted to make use
of this new function.
|
|
|
2e0a3048
|
2019-01-23T10:48:55
|
|
oidmap: introduce high-level setter for key/value pairs
Currently, one would use either `git_oidmap_insert` to insert key/value pairs
into a map or `git_oidmap_put` to insert a key only. These function have
historically been macros, which is why their syntax is kind of weird: instead of
returning an error code directly, they instead have to be passed a pointer to
where the return value shall be stored. This does not match libgit2's common
idiom of directly returning error codes.Furthermore, `git_oidmap_put` is tightly
coupled with implementation details of the map as it exposes the index of
inserted entries.
Introduce a new function `git_oidmap_set`, which takes as parameters the map,
key and value and directly returns an error code. Convert all trivial callers of
`git_oidmap_insert` and `git_oidmap_put` to make use of it.
|
|
|
9694ef20
|
2018-12-17T09:01:53
|
|
oidmap: introduce high-level getter for values
The current way of looking up an entry from a map is tightly coupled with the
map implementation, as one first has to look up the index of the key and then
retrieve the associated value by using the index. As a caller, you usually do
not care about any indices at all, though, so this is more complicated than
really necessary. Furthermore, it invites for errors to happen if the correct
error checking sequence is not being followed.
Introduce a new high-level function `git_oidmap_get` that takes a map and a key
and returns a pointer to the associated value if such a key exists. Otherwise,
a `NULL` pointer is returned. Adjust all callers that can trivially be
converted.
|
|
|
03555830
|
2019-01-23T10:44:33
|
|
strmap: introduce high-level setter for key/value pairs
Currently, one would use the function `git_strmap_insert` to insert key/value
pairs into a map. This function has historically been a macro, which is why its
syntax is kind of weird: instead of returning an error code directly, it instead
has to be passed a pointer to where the return value shall be stored. This does
not match libgit2's common idiom of directly returning error codes.
Introduce a new function `git_strmap_set`, which takes as parameters the map,
key and value and directly returns an error code. Convert all callers of
`git_strmap_insert` to make use of it.
|
|
|
ef507bc7
|
2019-01-23T10:44:02
|
|
strmap: introduce `git_strmap_get` and use it throughout the tree
The current way of looking up an entry from a map is tightly coupled with the
map implementation, as one first has to look up the index of the key and then
retrieve the associated value by using the index. As a caller, you usually do
not care about any indices at all, though, so this is more complicated than
really necessary. Furthermore, it invites for errors to happen if the correct
error checking sequence is not being followed.
Introduce a new high-level function `git_strmap_get` that takes a map and a key
and returns a pointer to the associated value if such a key exists. Otherwise,
a `NULL` pointer is returned. Adjust all callers that can trivially be
converted.
|
|
|
7e926ef3
|
2018-11-30T12:14:43
|
|
maps: provide a uniform entry count interface
There currently exist two different function names for getting the entry count
of maps, where offmaps offset and string maps use `num_entries` and OID maps use
`size`. In most programming languages with built-in map types, this is simply
called `size`, which is also shorter to type. Thus, this commit renames the
other two functions `num_entries` to match the common way and adjusts all
callers.
|
|
|
351eeff3
|
2019-01-23T10:42:46
|
|
maps: use uniform lifecycle management functions
Currently, the lifecycle functions for maps (allocation, deallocation, resize)
are not named in a uniform way and do not have a uniform function signature.
Rename the functions to fix that, and stick to libgit2's naming scheme of saying
`git_foo_new`. This results in the following new interface for allocation:
- `int git_<t>map_new(git_<t>map **out)` to allocate a new map, returning an
error code if we ran out of memory
- `void git_<t>map_free(git_<t>map *map)` to free a map
- `void git_<t>map_clear(git<t>map *map)` to remove all entries from a map
This commit also fixes all existing callers.
|
|
|
bda08397
|
2019-02-14T16:57:47
|
|
Merge pull request #4982 from pks-t/pks/worktree-add-bare-head
Enable creation of worktree from bare repo's default branch
|
|
|
48005936
|
2019-02-14T16:55:18
|
|
Merge pull request #4965 from hackworks/eliminate-check-for-keep-file
Allow bypassing check for '.keep' file
|
|
|
788cd2d5
|
2019-02-14T13:49:35
|
|
branches: do not assert that the given ref is a branch
Libraries should use assert(3P) only very scarcely. First, we usually
shouldn't cause the caller of our library to abort in case where the
assert fails. Second, if code is compiled with -DNDEBUG, then the assert
will not be included at all.
In our `git_branch_is_checked_out` function, we have an assert that
verifies that the given reference parameter is non-NULL and in fact a
branch. While the first check is fine, the second is not. E.g. when
compiled with -DNDEBUG, we'd proceed and treat the given reference as a
branch in all cases.
Fix the issue by instead treating a non-branch reference as not being
checked out. This is the obvious solution, as references other than
branches cannot be directly checked out.
|
|
|
a0f87e16
|
2019-02-14T13:26:30
|
|
branches: add tests for `git_branch_is_checked_out`
We currently do not have any tests at all for the
`git_branch_is_checked_out` function. Add some basic ones.
|
|
|
bf013fc0
|
2019-02-14T13:30:33
|
|
branch: fix `branch_is_checked_out` with bare repos
In a bare repository, HEAD usually points to the branch that is
considered the "default" branch. As the current implementation for
`git_branch_is_checked_out` only does a comparison of HEAD with the
branch that is to be checked, it will say that the branch pointed to by
HEAD in such a bare repo is checked out.
Fix this by skipping the main repo's HEAD when it is bare.
|
|
|
efb20825
|
2019-02-14T13:05:49
|
|
branches: introduce flag to skip enumeration of certain HEADs
Right now, the function `git_repository_foreach_head` will always
iterate over all HEADs of the main repository and its worktrees. In some
cases, it might be required to skip either of those, though. Add a flag
in preparation for the following commit that enables this behaviour.
|
|
|
24ac9e0c
|
2019-02-13T23:26:54
|
|
deprecation: ensure we GIT_EXTERN deprecated funcs
Although the error functions were deprecated, we did not properly mark
them as deprecated. We need to include the `deprecated.h` file in order
to ensure that the functions get their export attributes.
Similarly, do not define `GIT_DEPRECATE_HARD` within the library, or
those functions will also not get their export attributes. Define that
only on the tests and examples.
|
|
004a3398
|
2019-01-28T18:31:21
|
|
Allow bypassing check '.keep' files using libgit2 option 'GIT_OPT_IGNORE_PACK_KEEP_FILE_CHECK'
|
|
4e3949b7
|
2019-01-30T02:14:11
|
|
tests: test that largefiles can be read through the tree API
|
|
|
3fba5891
|
2019-01-20T23:53:33
|
|
test: cast to a char the zstream test
|
|
|
f25bb508
|
2019-01-20T23:52:50
|
|
index test: cast times explicitly
Cast actual filesystem data to the int32_t that index entries store.
|
|
|
826d9a4d
|
2019-01-25T09:43:20
|
|
Merge pull request #4858 from tiennou/fix/index-ext-read
index: preserve extension parsing errors
|
|
|
c951b825
|
2019-01-23T00:32:40
|
|
deprecation: define GIT_DEPRECATE_HARD internally
Ensure that we do not use any deprecated functions in the library
source, test code or examples.
|
|
|
9c5e05ad
|
2019-01-23T10:43:29
|
|
deprecation: move deprecated tests into their own file
Move the deprecated stream tests into their own compilation unit. This
will allow us to disable any preprocessor directives that apply to
deprecation just for these tests (eg, disabling `GIT_DEPRECATED_HARD`).
|
|
|
0bf7e043
|
2019-01-24T12:12:04
|
|
index: preserve extension parsing errors
Previously, we would clobber any extension-specific error message with
an "extension is truncated" message. This makes `read_extension`
correctly preserve those errors, takes responsibility for truncation
errors, and adds a new message with the actual extension signature for
unsupported mandatory extensions.
|
|
|
f673e232
|
2018-12-27T13:47:34
|
|
git_error: use new names in internal APIs and usage
Move to the `git_error` name in the internal API for error-related
functions.
|
|
f7416509
|
2019-01-20T20:15:31
|
|
Fix odb foreach to also close on positive error code
In include/git2/odb.h it states that callback can also return
positive value which should break looping.
Implementations of git_odb_foreach() and pack_backend__foreach()
did not respect that.
|
|
|
1758636b
|
2019-01-19T01:38:34
|
|
Merge pull request #4939 from libgit2/ethomson/git_ref
Move `git_ref_t` to `git_reference_t`
|
|
|
b2c2dc64
|
2019-01-19T01:36:40
|
|
Merge pull request #4940 from libgit2/ethomson/git_obj
More `git_obj` to `git_object` updates
|
|
|
c352e561
|
2019-01-19T01:34:21
|
|
Merge pull request #4943 from libgit2/ethomson/ci
ci: only run invasive tests in nightly
|
|
|
423d3e73
|
2019-01-19T00:08:05
|
|
ci: precisely identify the invasive tests
|
|
|
abe23675
|
2019-01-17T20:09:05
|
|
Merge pull request #4925 from lhchavez/fix-a-bunch-of-warnings
Fix a bunch of warnings
|
|
|
cd350852
|
2019-01-17T10:40:13
|
|
object_type: GIT_OBJECT_BAD is now GIT_OBJECT_INVALID
We use the term "invalid" to refer to bad or malformed data, eg
`GIT_REF_INVALID` and `GIT_EINVALIDSPEC`. Since we're changing the
names of the `git_object_t`s in this release, update it to be
`GIT_OBJECT_INVALID` instead of `BAD`.
|
|
|
ed8cfbf0
|
2019-01-17T00:32:31
|
|
references: use new names in internal usage
Update internal usage to use the `git_reference` names for constants.
|
|
|
7a43a892
|
2019-01-15T00:42:14
|
|
Convert tests/resources/push.sh to LF endings
This changes that file to use UNIX line-endings, which makes sense since
this is a UNIXy file.
|