|
cdd0bc2f
|
2018-03-26T18:44:13
|
|
checkout: change default strategy to SAFE
As per #4200, our default is quite surprising to users that expect checkout to just "do the thing".
|
|
a52b4c51
|
2018-03-23T09:59:46
|
|
odb: fix writing to fake write streams
In commit 7ec7aa4a7 (odb: assert on logic errors when writing objects,
2018-02-01), the check for whether we are trying to overflowing the fake
stream buffer was changed from returning an error to raising an assert.
The conversion forgot though that the logic around `assert`s are
basically inverted. Previously, if the statement
stream->written + len > steram->size
evaluated to true, we would return a `-1`. Now we are asserting that
this statement is true, and in case it is not we will raise an error. So
the conversion to the `assert` in fact changed the behaviour to the
complete opposite intention.
Fix the assert by inverting its condition again and add a regression
test.
|
|
16210877
|
2018-02-28T12:59:47
|
|
Unescape repo before constructing ssh request
|
|
|
8a2cdbd3
|
2018-02-28T12:58:58
|
|
Rename unescape and make non-static
|
|
0e4f3d9d
|
2018-03-03T21:47:22
|
|
gitno_extract_url_parts: decode hostnames
RFC 3986 says that hostnames can be percent encoded. Percent decode
hostnames in our URLs.
|
|
|
05551ca0
|
2018-03-03T20:14:54
|
|
Remove now unnecessary `gitno_unescape`
|
|
|
60e7848e
|
2018-03-03T20:13:30
|
|
gitno_extract_url_parts: use `git_buf`s
Now that we can decode percent-encoded strings as part of `git_buf`s,
use that decoder in `gitno_extract_url_parts`.
|
|
|
6f577906
|
2018-03-03T20:09:09
|
|
ssh urls: use `git_buf_decode_percent`
Use `git_buf_decode_percent` so that we can avoid allocating a temporary
buffer.
|
|
|
8070a357
|
2018-03-03T18:47:35
|
|
Introduce `git_buf_decode_percent`
Introduce a function to take a percent-encoded string (URI encoded,
described by RFC 1738) and decode it into a `git_buf`.
|
|
|
3db1af1f
|
2018-03-08T12:36:46
|
|
index: error out on unreasonable prefix-compressed path lengths
When computing the complete path length from the encoded
prefix-compressed path, we end up just allocating the complete path
without ever checking what the encoded path length actually is. This can
easily lead to a denial of service by just encoding an unreasonable long
path name inside of the index. Git already enforces a maximum path
length of 4096 bytes. As we also have that enforcement ready in some
places, just make sure that the resulting path is smaller than
GIT_PATH_MAX.
Reported-by: Krishna Ram Prakash R <krp@gtux.in>
Reported-by: Vivek Parikh <viv0411.parikh@gmail.com>
|
|
|
3207ddb0
|
2018-03-08T12:00:27
|
|
index: fix out-of-bounds read with invalid index entry prefix length
The index format in version 4 has prefix-compressed entries, where every
index entry can compress its path by using a path prefix of the previous
entry. Since implmenting support for this index format version in commit
5625d86b9 (index: support index v4, 2016-05-17), though, we do not
correctly verify that the prefix length that we want to reuse is
actually smaller or equal to the amount of characters than the length of
the previous index entry's path. This can lead to a an integer underflow
and subsequently to an out-of-bounds read.
Fix this by verifying that the prefix is actually smaller than the
previous entry's path length.
Reported-by: Krishna Ram Prakash R <krp@gtux.in>
Reported-by: Vivek Parikh <viv0411.parikh@gmail.com>
|
|
|
58a6fe94
|
2018-03-08T11:49:19
|
|
index: convert `read_entry` to return entry size via an out-param
The function `read_entry` does not conform to our usual coding style of
returning stuff via the out parameter and to use the return value for
reporting errors. Due to most of our code conforming to that pattern, it
has become quite natural for us to actually return `-1` in case there is
any error, which has also slipped in with commit 5625d86b9 (index:
support index v4, 2016-05-17). As the function returns an `size_t` only,
though, the return value is wrapped around, causing the caller of
`read_tree` to continue with an invalid index entry. Ultimately, this
can lead to a double-free.
Improve code and fix the bug by converting the function to return the
index entry size via an out parameter and only using the return value to
indicate errors.
Reported-by: Krishna Ram Prakash R <krp@gtux.in>
Reported-by: Vivek Parikh <viv0411.parikh@gmail.com>
|
|
53e692af
|
2018-03-02T12:49:54
|
|
worktree: rename parameter creason to reason
|
|
|
12356076
|
2018-03-02T12:41:04
|
|
worktree: lock reason should be const
|
|
|
8a8ea1db
|
2018-02-28T18:14:52
|
|
Merge pull request #4552 from libgit2/cmn/config-header-common
Cast less blindly between configuration objects
|
|
|
e8e490b2
|
2018-02-28T17:01:47
|
|
Merge pull request #4554 from pks-t/pks/curl-init
curl: initialize and cleanup global curl state
|
|
9cd0c6f1
|
2018-02-28T16:01:16
|
|
config: return an error if config_refresh is called on a snapshot
Instead of treating it as a no-op, treat it as a programming error and return
the same kind of error as if you called to set or delete variables on a
snapshot.
|
|
|
2022b004
|
2018-02-28T12:06:59
|
|
curl: explicitly initialize and cleanup global curl state
Our curl-based streams make use of the easy curl interface. This
interface automatically initializes and de-initializes the global curl
state by calling out to `curl_global_init` and `curl_global_cleanup`.
Thus, all global state will be repeatedly re-initialized when creating
multiple curl streams in succession. Despite being inefficient, this is
not thread-safe due to `curl_global_init` being not thread-safe itself.
Thus a multi-threaded programing handling multiple curl streams at the
same time is inherently racy.
Fix the issue by globally initializing and cleaning up curl's state.
|
|
|
a33deeb4
|
2018-02-28T12:20:23
|
|
win32: strncmp -> git__strncmp
The win32 C library is compiled cdecl, however when configured with
`STDCALL=ON`, our functions (and function pointers) will use the stdcall
calling convention. You cannot set a `__stdcall` function pointer to a
`__cdecl` function, so it's easier to just use our `git__strncmp`
instead of sorting that mess out.
|
|
|
2424e64c
|
2018-02-28T12:06:02
|
|
config: harden our use of the backend objects a bit
When we create an iterator we don't actually know that we have a live config
object and we must instead only rely on the header. We fixed it to use this in a
previous commit, but this makes it harder to misuse by converting to use the
header object in the typecast.
We also guard inside the `config_refresh` function against being given a
snapshot (although callers right now do check).
|
|
|
1785de4e
|
2018-02-28T11:46:17
|
|
config: move the level field into the header
We use it in a few places where we might have a full object or a snapshot so
move it to where we can actually access it.
|
|
|
c1524b2e
|
2018-02-28T11:33:11
|
|
config: move the repository to the diskfile header
We pass this around and when creating a new iterator we need to read the
repository pointer.
Put it in a common place so we can reach it regardless of whether we got a full
object or a snapshot.
|
|
|
c9d59c61
|
2018-02-27T12:45:21
|
|
Merge pull request #4545 from libgit2/ethomson/checkout_filemode
Respect core.filemode in checkout
|
|
|
5ecb6220
|
2018-02-25T15:46:51
|
|
winhttp: enable TLS 1.2 on Windows 7 and earlier
Versions of Windows prior to Windows 8 do not enable TLS 1.2 by default,
though support may exist. Try to enable TLS 1.2 support explicitly on
connections.
This request may fail if the operating system does not have TLS 1.2
support - the initial release of Vista lacks TLS 1.2 support (though
it is available as a software update) and XP completely lacks TLS 1.2
support. If this request does fail, the HTTP context is still valid,
and still maintains the original protocol support. So we ignore the
failure from this operation.
|
|
|
934e6a3b
|
2018-02-27T11:24:30
|
|
winhttp: include constants for TLS 1.1/1.2 support
For platforms that do not define `WINHTTP_FLAG_SECURE_PROTOCOL_TLS1_1`
and/or `WINHTTP_FLAG_SECURE_PROTOCOL_TLS1_2`.
|
|
|
8c8db980
|
2018-02-27T10:32:29
|
|
mingw: update TLS option flags
Include the constants for `WINHTTP_FLAG_SECURE_PROTOCOL_TLS1_1` and
`WINHTTP_FLAG_SECURE_PROTOCOL_TLS1_2` so that they can be used by mingw.
This updates both the `deps/winhttp` framework (for classic mingw) and
adds the defines for mingw64, which does not use that framework.
|
|
|
c214ba19
|
2018-02-20T00:35:27
|
|
checkout: respect core.filemode when comparing filemodes
Fixes #4504
|
|
|
894ccf4b
|
2018-02-20T16:14:54
|
|
Merge pull request #4535 from libgit2/ethomson/checkout_typechange_with_index_and_wd
checkout: when examining index (instead of workdir), also examine mode
|
|
|
ce7080a0
|
2018-02-20T10:38:27
|
|
diff_tform: fix rename detection with rewrite/delete pair
A rewritten file can either be classified as a modification of its
contents or of a delete of the complete file followed by an addition of
the new content. This distinction becomes important when we want to
detect renames for rewrites. Given a scenario where a file "a" has been
deleted and another file "b" has been renamed to "a", this should be
detected as a deletion of "a" followed by a rename of "a" -> "b". Thus,
splitting of the original rewrite into a delete/add pair is important
here.
This splitting is represented by a flag we can set at the current delta.
While the flag is already being set in case we want to break rewrites,
we do not do so in case where the `GIT_DIFF_FIND_RENAMES_FROM_REWRITES`
flag is set. This can trigger an assert when we try to match the source
and target deltas.
Fix the issue by setting the `GIT_DIFF_FLAG__TO_SPLIT` flag at the delta
when it is a rename target and `GIT_DIFF_FIND_RENAMES_FROM_REWRITES` is
set.
|
|
|
d7fea1e1
|
2018-02-18T16:10:33
|
|
checkout: take mode into account when comparing index to baseline
When checking out a file, we determine whether the baseline (what we
expect to be in the working directory) actually matches the contents
of the working directory. This is safe behavior to prevent us from
overwriting changes in the working directory.
We look at the index to optimize this test: if we know that the index
matches the working directory, then we can simply look at the index
data compared to the baseline.
We have historically compared the baseline to the index entry by oid.
However, we must also compare the mode of the two items to ensure that
they are identical. Otherwise, we will refuse to update the working
directory for a mode change.
|
|
|
f1ad004c
|
2018-02-18T22:29:48
|
|
Merge pull request #4529 from libgit2/ethomson/index_add_requires_files
git_index_add_frombuffer: only accept files/links
|
|
|
5f774dbf
|
2018-02-11T10:14:13
|
|
git_index_add_frombuffer: only accept files/links
Ensure that the buffer given to `git_index_add_frombuffer` represents a
regular blob, an executable blob, or a link. Explicitly reject commit
entries (submodules) - it makes little sense to allow users to add a
submodule from a string; there's no possible path to success.
|
|
|
92324d84
|
2018-02-16T11:28:53
|
|
util: clean up header includes
While "util.h" declares the macro `git__tolower`, which simply resorts
to tolower(3P) on Unix-like systems, the <ctype.h> header is only being
included in "util.c". Thus, anybody who has included "util.h" without
having <ctype.h> included will fail to compile as soon as the macro is
in use.
Furthermore, we can clean up additional includes in "util.c" and simply
replace them with an include for "common.h".
|
|
|
06b8a40f
|
2018-02-16T11:29:46
|
|
Explicitly mark fallthrough cases with comments
A lot of compilers nowadays generate warnings when there are cases in a
switch statement which implicitly fall through to the next case. To
avoid this warning, the last line in the case that is falling through
can have a comment matching a regular expression, where one possible
comment body would be `/* fall through */`.
An alternative to the comment would be an explicit attribute like e.g.
`[[clang::fallthrough]` or `__attribute__ ((fallthrough))`. But GCC only
introduced support for such an attribute recently with GCC 7. Thus, and
also because the fallthrough comment is supported by most compilers, we
settle for using comments instead.
One shortcoming of that method is that compilers are very strict about
that. Most interestingly, that comment _really_ has to be the last line.
In case a closing brace follows the comment, the heuristic will fail.
|
|
|
7c6e9175
|
2018-02-16T11:11:11
|
|
index: shut up warning on uninitialized variable
Even though the `entry` variable will always be initialized when
`read_entry` returns success and even though we never dereference
`entry` in case `read_entry` fails, GCC prints a warning about
uninitialized use. Just initialize the pointer to `NULL` in order to
shut GCC up.
|
|
|
84f03b3a
|
2018-02-16T10:48:55
|
|
streams: openssl: fix use of uninitialized variable
When verifying the server certificate, we do try to make sure that the
hostname actually matches the certificate alternative names. In cases
where the host is either an IPv4 or IPv6 address, we have to compare the
binary representations of the hostname with the declared IP address of
the certificate. We only do that comparison in case we were successfully
able to parse the hostname as an IP, which would always result in the
memory region being initialized. Still, GCC 6.4.0 was complaining about
usage of non-initialized memory.
Fix the issue by simply asserting that `addr` needs to be initialized.
This shuts up the GCC warning.
|
|
|
ee6be190
|
2018-01-31T08:36:19
|
|
http: standardize user-agent addition
The winhttp and posix http each need to add the user-agent to their
requests. Standardize on a single function to include this so that we
do not get the version numbers we're sending out of sync.
Assemble the complete user agent in `git_http__user_agent`, returning
assembled strings.
Co-authored-by: Patrick Steinhardt <ps@pks.im>
|
|
|
178fda8a
|
2018-02-09T17:55:18
|
|
hash: win32: fix missing comma in `giterr_set`
|
|
|
638c6b8c
|
2018-02-09T17:32:15
|
|
odb_loose: only close file descriptor if it was opened successfully
|
|
|
a43bcd2c
|
2018-02-09T17:31:50
|
|
odb: fix memory leaks due to not freeing hash context
|
|
|
9985edb5
|
2018-02-01T06:32:55
|
|
hash: set error messages on failure
|
|
|
619f61a8
|
2018-02-01T06:22:36
|
|
odb: error when we can't create object header
Return an error to the caller when we can't create an object header for
some reason (printf failure) instead of simply asserting.
|
|
|
7ec7aa4a
|
2018-02-01T05:54:57
|
|
odb: assert on logic errors when writing objects
There's no recovery possible if we're so confused or corrupted that
we're trying to overwrite our memory. Simply assert.
|
|
|
138e4c2b
|
2018-02-01T06:35:31
|
|
git_odb__hashfd: propagate error on failures
|
|
|
35ed256b
|
2018-02-01T05:11:05
|
|
git_odb__hashobj: provide errors messages on failures
Provide error messages on hash failures: assert when given invalid
input instead of failing with a user error; provide error messages
on program errors.
|
|
|
59d99adc
|
2018-01-31T09:34:52
|
|
odb: check for alloc errors on hardcoded objects
It's unlikely that we'll fail to allocate a single byte, but let's check
for allocation failures for good measure. Untangle `-1` being a marker
of not having found the hardcoded odb object; use that to reflect actual
errors.
|
|
|
ef902864
|
2018-01-31T09:30:51
|
|
odb: error when we can't alloc an object
At the moment, we're swallowing the allocation failure. We need to
return the error to the caller.
|
|
|
0fd0bfe4
|
2018-02-08T22:51:46
|
|
Merge pull request #4450 from libgit2/ethomson/odb_loose_readstream
Streaming read support for the loose ODB backend
|
|
|
d749822c
|
2018-02-08T22:50:58
|
|
Merge pull request #4491 from libgit2/ethomson/recursive
Recursive merge: reverse the order of merge bases
|
|
|
ba4faf6e
|
2018-02-08T17:15:33
|
|
buf_text: remove `offset` parameter of BOM detection function
The function to detect a BOM takes an offset where it shall look for a
BOM. No caller uses that, and searching for the BOM in the middle of a
buffer seems to be very unlikely, as a BOM should only ever exist at
file start.
Remove the parameter, as it has already caused confusion due to its
weirdness.
|
|
|
2eea5f1c
|
2018-02-08T10:27:31
|
|
config_parse: fix reading files with BOM
The function `skip_bom` is being used to detect and skip BOM marks
previously to parsing a configuration file. To do so, it simply uses
`git_buf_text_detect_bom`. But since the refactoring to use the parser
interface in commit 9e66590bd (config_parse: use common parser
interface, 2017-07-21), the BOM detection was actually broken.
The issue stems from a misunderstanding of `git_buf_text_detect_bom`. It
was assumed that its third parameter limits the length of the character
sequence that is to be analyzed, while in fact it was an offset at which
we want to detect the BOM. Fix the parameter to be `0` instead of the
buffer length, as we always want to check the beginning of the
configuration file.
|
|
|
848153f3
|
2018-02-08T10:02:29
|
|
config_parse: handle empty lines with CRLF
Currently, the configuration parser will fail reading empty lines with
just an CRLF-style line ending. Special-case the '\r' character in order
to handle it the same as Unix-style line endings. Add tests to spot this
regression in the future.
|
|
|
5340ca77
|
2018-02-08T09:31:51
|
|
config_parse: add comment to clarify logic getting next character
Upon each line, the configuration parser tries to get either the first
non-whitespace character or the first whitespace character, in case
there is no non-whitespace character. The logic handling this looks
rather odd and doesn't immediately convey this meaning, so add a comment
to clarify what happens.
|
|
1403c612
|
2018-01-22T14:44:31
|
|
merge: virtual commit should be last argument to merge-base
Our virtual commit must be the last argument to merge-base: since our
algorithm pushes _both_ parents of the virtual commit, it needs to be
the last argument, since merge-base:
> Given three commits A, B and C, git merge-base A B C will compute the
> merge base between A and a hypothetical commit M
We want to calculate the merge base between the actual commit ("two")
and the virtual commit ("one") - since one actually pushes its parents
to the merge-base calculation, we need to calculate the merge base of
"two" and the parents of one.
|
|
|
b924df1e
|
2018-01-21T18:05:45
|
|
merge: reverse merge bases for recursive merge
When the commits being merged have multiple merge bases, reverse the
order when creating the virtual merge base. This is for compatibility
with git's merge-recursive algorithm, and ensures that we build
identical trees.
Git does this to try to use older merge bases first. Per 8918b0c:
> It seems to be the only sane way to do it: when a two-head merge is
> done, and the merge-base and one of the two branches agree, the
> merge assumes that the other branch has something new.
>
> If we start creating virtual commits from newer merge-bases, and go
> back to older merge-bases, and then merge with newer commits again,
> chances are that a patch is lost, _because_ the merge-base and the
> head agree on it. Unlikely, yes, but it happened to me.
|
|
|
ed51feb7
|
2018-01-21T18:01:20
|
|
oidarray: introduce git_oidarray__reverse
Provide a simple function to reverse an oidarray.
|
|
|
26f5d36d
|
2018-02-04T10:27:39
|
|
Merge pull request #4489 from libgit2/ethomson/conflicts_crlf
Conflict markers should match EOL style in conflicting files
|
|
|
8abd514c
|
2018-02-02T17:37:12
|
|
Merge pull request #4499 from pks-t/pks/setuid-config
sysdir: do not use environment in setuid case
|
|
|
2553cbe3
|
2018-02-02T11:33:46
|
|
Merge pull request #4512 from libgit2/ethomson/header_guards
Consistent header guards
|
|
|
53454b68
|
2018-02-02T11:31:15
|
|
Merge pull request #4510 from pks-t/pks/attr-file-bare-stat
attr: avoid stat'ting files for bare repositories
|
|
|
0967459e
|
2018-01-25T13:11:34
|
|
sysdir: do not use environment in setuid case
In order to derive the location of some Git directories, we currently
use the environment variables $HOME and $XDG_CONFIG_HOME. This might
prove to be problematic whenever the binary is run with setuid, that is
when the effective user does not equal the real user. In case the
environment variables do not get sanitized by the caller, we thus might
end up using the real user's configuration when doing stuff as the
effective user.
The fix is to use the passwd entry's directory instead of $HOME in this
situation. As this might break scenarios where the user explicitly sets
$HOME to another path, this fix is only applied in case the effective
user does not equal the real user.
|
|
|
09df354e
|
2018-02-01T16:52:43
|
|
odb_loose: HEADER_LEN -> MAX_HEADER_LEN
`MAX_HEADER_LEN` is a more descriptive constant name.
|
|
|
624614b2
|
2017-12-19T00:43:49
|
|
odb_loose: validate length when checking for zlib content
When checking to see if a file has zlib deflate content, make sure that
we actually have read at least two bytes before examining the array.
|
|
|
1118ba3e
|
2017-12-18T23:08:40
|
|
odb_loose: `read_header` for packlike loose objects
Support `read_header` for "packlike loose objects", which were a
temporarily and uncommonly used format loose object format that encodes
the header before the zlib deflate data.
This will never actually be seen in the wild, but add support for it for
completeness and (more importantly) because our corpus of test data has
objects in this format, so it's easier to support it than to try to
special case it.
|
|
|
4c7a16b7
|
2017-12-18T15:56:21
|
|
odb_loose: read_header should use zstream
Make `read_header` use the common zstream implementation.
Remove the now unnecessary zlib wrapper in odb_loose.
|
|
|
6155e06b
|
2017-12-17T18:44:02
|
|
zstream: introduce a single chunk reader
Introduce `get_output_chunk` that will inflate/deflate all the available
input buffer into the output buffer. `get_output` will call
`get_output_chunk` in a loop, while other consumers can use it to
inflate only a piece of the data.
|
|
|
80dc3946
|
2017-12-17T16:26:48
|
|
odb_loose: packlike loose objects use `git_zstream`
Refactor packlike loose object reads to use `git_zstream` for
simplification.
|
|
|
7cb5bae7
|
2017-12-17T11:55:18
|
|
odb: loose object streaming for packlike loose objects
A "packlike" loose object was a briefly lived loose object format where
the type and size were encoded in uncompressed space at the beginning of
the file, followed by the compressed object contents. Handle these in a
streaming manner as well.
|
|
|
b61846f2
|
2017-12-17T02:14:29
|
|
odb: introduce streaming loose object reader
Provide a streaming loose object reader.
|
|
|
97f9a5f0
|
2017-12-17T01:12:49
|
|
odb: provide length and type with streaming read
The streaming read functionality should provide the length and the type
of the object, like the normal read functionality does.
|
|
|
c74e9271
|
2017-12-16T22:10:11
|
|
odb_loose: stream -> writestream
There are two streaming functions; one for reading, one for writing.
Disambiguate function names between `stream` and `writestream` to make
allowances for a read stream.
|
|
|
abb04caa
|
2018-02-01T15:55:48
|
|
consistent header guards
use consistent names for the #include / #define header guard pattern.
|
|
|
e28e17e6
|
2018-02-01T10:36:33
|
|
attr: avoid stat'ting files for bare repositories
Depending on whether the path we want to look up an attribute for is a
file or a directory, the fnmatch function will be called with different
flags. Because of this, we have to first stat(3) the path to determine
whether it is a file or directory in `git_attr_path__init`. This is
wasteful though in bare repositories, where we can already be assured
that the path will never exist at all due to there being no worktree. In
this case, we will execute an unnecessary syscall, which might be
noticeable on networked file systems.
What happens right now is that we always pass the `GIT_DIR_FLAG_UNKOWN`
flag to `git_attr_path__init`, which causes it to `stat` the file itself
to determine its type. As it is calling `git_path_isdir` on the path,
which will always return `false` in case the path does not exist, we end
up with the path always being treated as a file in case of a bare
repository. As such, we can just check the bare-repository case in all
callers and then pass in `GIT_DIR_FLAG_FALSE` ourselves, avoiding the
need to `stat`. While this may not always be correct, it at least is no
different from our current behavior.
|
|
|
341608dc
|
2018-01-31T14:48:42
|
|
Merge pull request #4507 from tomas/patch-1
Honor 'GIT_USE_NSEC' option in `filesystem_iterator_set_current`
|
|
|
9d8510b3
|
2018-01-31T09:28:43
|
|
Merge pull request #4488 from libgit2/ethomson/conflict_marker_size
Use longer conflict markers in recursive merge base
|
|
054e4c08
|
2018-01-31T14:28:25
|
|
Set ctime/mtime nanosecs to 0 if USE_NSEC is not defined
|
|
|
752006dd
|
2018-01-30T23:21:19
|
|
Honor 'GIT_USE_NSEC' option in `filesystem_iterator_set_current`
This should have been part of PR #3638. Without this we still get
nsec-related errors, even when using -DGIT_USE_NSEC:
error: ‘struct stat’ has no member named ‘st_mtime_nsec’
|
|
|
275f103d
|
2018-01-12T08:59:40
|
|
odb: reject reading and writing null OIDs
The null OID (hash with all zeroes) indicates a missing object in
upstream git and is thus not a valid object ID. Add defensive
measurements to avoid writing such a hash to the object database in the
very unlikely case where some data results in the null OID. Furthermore,
add shortcuts when reading the null OID from the ODB to avoid ever
returning an object when a faulty repository may contain the null OID.
|
|
|
c0487bde
|
2018-01-12T08:23:43
|
|
tree: reject writing null-OID entries to a tree
In commit a96d3cc3f (cache-tree: reject entries with null sha1,
2017-04-21), the git.git project has changed its stance on null OIDs in
tree objects. Previously, null OIDs were accepted in tree entries to
help tools repair broken history. This resulted in some problems though
in that many code paths mistakenly passed null OIDs to be added to a
tree, which was not properly detected.
Align our own code base according to the upstream change and reject
writing tree entries early when the OID is all-zero.
|
|
d23ce187
|
2018-01-22T11:55:28
|
|
odb: export mempack backend
Fixes #4492, #4496.
|
|
|
7f52bc5a
|
2018-01-20T18:19:26
|
|
xdiff: upgrade to git's included xdiff
Upgrade xdiff to git's most recent version, which includes changes to
CR/LF handling. Now CR/LF included in the input files will be detected
and conflict markers will be emitted with CR/LF when appropriate.
|
|
|
185b0d08
|
2018-01-20T19:41:28
|
|
merge: recursive uses larger conflict markers
Git uses longer conflict markers in the recursive merge base - two more
than the default (thus, 9 character long conflict markers). This allows
users to tell the difference between the recursive merge conflicts and
conflicts between the ours and theirs branches.
This was introduced in git d694a17986a28bbc19e2a6c32404ca24572e400f.
Update our tests to expect this as well.
|
|
|
b8e9467a
|
2018-01-20T19:39:34
|
|
merge: allow custom conflict marker size
Allow for a custom conflict marker size, allowing callers to override
the default size of the "<<<<<<<" and ">>>>>>>" markers in the
conflicted output file.
|
|
|
45f58409
|
2018-01-20T15:15:40
|
|
Merge pull request #4484 from pks-t/pks/fail-creating-branch-HEAD
branch: refuse creating branches named 'HEAD'
|
|
|
4ea8035d
|
2018-01-20T14:56:51
|
|
Merge pull request #4478 from libgit2/cmn/packed-refs-sorted
refs: include " sorted " in our packed-refs header
|
|
|
a9677e01
|
2018-01-19T09:20:59
|
|
branch: refuse creating branches named 'HEAD'
Since a625b092c (branch: correctly reject refs/heads/{-dash,HEAD},
2017-11-14), which is included in v2.16.0, upstream git refuses to
create branches which are named HEAD to avoid ambiguity with the
symbolic HEAD reference. Adjust our own code to match that behaviour and
reject creating branches names HEAD.
|
|
4893a9c0
|
2018-01-17T13:54:42
|
|
Merge pull request #4451 from libgit2/charliesome/trailer-info
Implement message trailer parsing API
|
|
|
d4a3a4b5
|
2018-01-17T12:52:08
|
|
rename find_trailer to extract_trailer_block
|
|
|
d43974fb
|
2018-01-16T13:40:26
|
|
Change trailer API to return a simple array
|
|
|
9bf37ddd
|
2018-01-12T15:17:41
|
|
refs: include " sorted " in our packed-refs header
This lets git know that we do in fact have written our packed-refs file
sorted (which is apparently not necessarily the case) and it can then use the
new-ish mmaped access which lets it avoid significant amounts of effort parsing
potentially large files to get to a single piece of data.
|
|
|
90f81f9f
|
2018-01-12T12:56:57
|
|
transports: local: fix memory leak in reference walk
Upon downloading the pack file, the local transport will iterate through
every reference using `git_reference_foreach`. The function is a bit
tricky though in that it requires the passed callback to free the
references, which does not currently happen.
Fix the memory leak by freeing all passed references in the callback.
|
|
|
5734768b
|
2018-01-10T19:19:34
|
|
Merge remote-tracking branch 'origin/master' into charliesome/trailer-info
|
|
|
b21c5408
|
2018-01-08T12:33:07
|
|
cmake: add openssl to the private deps list when it's the TLS implementation
We might want OpenSSL to be the implementation for SHA-1 and/or TLS. If we only
want it for TLS (e.g. we're building with the collision-detecting SHA-1
implementation) then we did not indicate this to the systems including us a
static library.
Add OpenSSL to the list also during the TLS decision to make sure we say we
should link to it if we use it for TLS.
|
|
|
b85548ed
|
2018-01-08T12:30:50
|
|
cmake: treat LIBGIT2_PC_REQUIRES as a list
It is indeed a list of dependencies for those which include the static archive.
This is in preparation for adding two possible places where we might add openssl
as a dependency.
|
|
|
70db57d4
|
2018-01-05T15:31:51
|
|
Merge pull request #4398 from pks-t/pks/generic-sha1
cmake: allow explicitly choosing SHA1 backend
|
|
|
70aa6146
|
2017-12-05T08:48:31
|
|
cmake: allow explicitly choosing SHA1 backend
Right now, if SHA1DC is disabled, the SHA1 backend is mostly chosen
based on which system libgit2 is being compiled on and which libraries
have been found. To give developers and distributions more choice,
enable them to request specific backends by passing in a
`-DSHA1_BACKEND=<BACKEND>` option instead. This completely replaces the
previous auto-selection.
|
|
|
f315cd14
|
2018-01-03T18:44:12
|
|
make separators const a macro as well
|
|
|
1cda43ba
|
2018-01-03T18:30:04
|
|
make comment_line_char const a macro
|
|
|
a223bae5
|
2018-01-03T14:57:25
|
|
Merge pull request #4437 from pks-t/pks/openssl-hash-errors
hash: openssl: check return values of SHA1_* functions
|
|
|
399c0b19
|
2018-01-03T14:55:06
|
|
Merge pull request #4462 from pks-t/pks/diff-generated-excessive-stats
diff_generate: avoid excessive stats of .gitattribute files
|