kmx git

Commit	Date	Message
e758dd53	2020-09-10T15:02:00	egl: Make SDL_EGL_HasExtension() available outside of SDL_egl.c.
8709f67e	2020-09-08T08:42:30	Fixed bug 5215 - Fixing filenames passed to dlopen for OpenBSD Brad Smith Attached is a patch to use the proper filenames when trying to dlopen the respective shared libraries on OpenBSD.
1a5503ce	2020-07-28T21:11:25	kmsdrm: Moved to the ATOMIC KMS/DRM interface for buffer swapping, leaving DRM-legacy behind.
8babda2c	2020-07-16T13:18:19	egl: SDL_EGL_LoadLibaryOnly() shouldn't set _this->gl_config.driver_loaded = 1 This is handled in in the higher-level SDL_GL_LoadLibrary(). All uses of SDL_EGL_LoadLibrary (which calls the Only version) are just target-specific wrappers for their own GL_LoadLibrary hook, with two exceptions which now handle driver_loaded correctly (although it's questionable if these init-if-no-one-did-it-correctly-already code blocks should exist at all, fwiw). Fixes Bugzilla #5190.
132f87c3	2020-04-13T22:06:12	opengl: Don't try to do Desktop OpenGL stuff if support isn't available.
e96b05c3	2020-04-13T18:21:28	egl: Attempt to make this compile on WinRT, etc.
c0a875fa	2020-04-13T14:48:38	SDL_EGL_ChooseConfig: don't fall through if no matching format exists On Raspberry Pi 3 via the VC4 driver in firmware KMS mode, none of the found configs match the desired format, causing the function to fall through without any config being selected. Fix by first iterating over the found configs, and if no match exists, don't exclude the non-matching configs. This should fix RPI3 and possibly other targets without breaking targets that have a matching native format (such as RPI4).
64617d25	2020-04-13T14:45:40	opengl: Convert an int to an SDL_bool.
389c8995	2020-04-13T14:44:21	opengl: Allow SDL_GL_MakeCurrent() to accept a NULL window (thanks, Martin!). This allows you to bind surfaceless contexts on a background thread to, for example, load assets in a separate context, for platforms that have different requirements about sharing surfaces, etc. Martin's notes on the matter: "Here's a patch that enables passing NULL windows to SDL_GL_MakeCurrent, if the involved APIs allow it. Currently, this is only the case for EGL, and even then only if some specific extensions are present (which they usually are). If "surfaceless" contexts are not supported, SDL_GL_MakeCurrent continues to generate an error (albeit with a more specific error message than it used to), so this should not break anything that wasn't broken before." (Please see https://bugzilla.libsdl.org/show_bug.cgi?id=3695 for more discussion.) Fixes Bugzilla #3695.
b6afbe63	2020-04-07T09:38:57	Added SDL_log.h to SDL_internal.h so logging is available everywhere
90f9e8f8	2020-03-20T15:13:09	egl: Don't use SDL_LoadFunction to get GL entry points on Emscripten. This results in a dlsym() call, which causes Emscripten to panic if the game wasn't explicitly built dlopen support. eglGetProcAddress works just fine on this platform, so just let that codepath handle it.
a8780c6a	2020-01-16T20:49:25	Updated copyright date for 2020
3a8b8994	2019-10-23T11:07:11	Android: remove eglGetProcAdded busted comment (bug #4040)
24bee6e5	2019-10-18T21:47:30	Add internal function SDL_EGL_GetVersion()
e5bd2003	2019-10-18T14:08:07	Android: enable eglGetProcAddress (bug #4040, bug #4794)
03f27a3a	2019-10-18T13:27:58	Add robustness getting the EGL version (see bug #4040)
3ecce847	2019-10-18T00:07:32	egl: adjust how we load symbols in SDL_EGL_GetProcAddress. Use eglGetProcAddress for everything on EGL >= 1.5. Try SDL_LoadFunction first for EGL <= 1.4 in case it's a core symbol, and as a fallback if eglGetProcAddress fails. Finally, for EGL <= 1.4, fallback to eglGetProcAddress to catch extensions not exported from the shared library. (Maybe) Fixes Bugzilla #4794.
ee6d504a	2019-09-24T17:49:53	offscreen: Define missing define on a older EGL for an EXT function which it wont have
8a41948e	2019-09-24T17:27:51	offscreen: Avoid using EGLDeviceEXT as it causes issues with older platforms, which is just a void*
68985371	2019-09-24T16:36:48	offscreen: Add new video driver backend Offscreen The Offscreen video driver is intended to be used for headless rendering as well as allows for multiple GPUs to be used for headless rendering Currently only supports EGL (OpenGL / ES) or Framebuffers Adds a hint to specifiy which EGL device to use: SDL_HINT_EGL_DEVICE Adds testoffscreen.c which can be used to test the backend out Disabled by default for now
2b6473dc	2019-06-08T15:10:20	Fixed bug 4533 - Update ANGLE to load d3dcompiler_47.dll instead of d3dcompiler_46.dll msmshazan Update ANGLE Libraries to support d3dcompiler_47.dll since chrome does not ship with d3dcompiler_46.dll and d3dcompiler_43.dll
5e13087b	2019-01-04T22:01:14	Updated copyright for 2019
a95f91bc	2019-01-02T18:06:33	Fixed bug 3250 - Wrong backbuffer pixel format on Android, keep getting RGB_565 Use the egl format to reconfigure java SurfaceView holder format. If there is a change, it triggers a surfaceDestroyed/Created/Change sequence.
aeee424f	2018-10-31T15:16:51	Fixed bug 4349 - SDL_CreateWindow fails with KMS/DRM after upgrading Mesa to 18.2.3 Rainer Sabelka After I did an upgrade of my arch Linux installation (resulting in an update of Mesa to version 18.2.3), all my SDL2 applications which use the KMS/DRM driver stopped working. Reason: Creating a Window with SDL_CreateWindow failed because the call to EGL eglCreateWindowSurface() returns an error "EGL_BAD_MATCH". After investigating with the debugger I figured, that the configuration, which has been selected from the output of eglChooseConfig(), has an "EGL_NATIVE_VISUAL_ID" which does not match the "format" of the underlying gbm surface. The attached patch fixes the problem. It does so, by mimicking Weston's behavior. All configurations returned from eglChooseConfig() which have an visual_id different from the gbm format are discarded, and only from the remaining ones the "best" match is selected.
95579f5f	2018-10-01T09:40:58	Fixed bug 4220 - SDL_GL_CONTEXT_DEBUG_FLAG can fail silently on some Android devices
5febdfce	2018-09-24T11:49:25	Fixed whitespace
fe682827	2018-06-14T06:12:12	egl: Don't change context when deleting current. If we change the current context behind the app's back, those tracking the current context to minimize context changes are going to get confused. This brings the EGL backend in line with the GLX one. Fixes Bugzilla #4199.
999af809	2018-05-18T13:09:30	Merged latest changes from Steam Link app
40b27fd5	2018-02-12T17:00:00	revert the recent typecast assignment changes (see bug #4079) also change the void* typedefs for the two vulkan function pointers added in vulkan_internal.h into generic function pointer typedefs.
bd0def06	2018-02-07T14:12:26	Set rpath instead of changing environment for RPi Credit goes to Adrian Perez de Castro for the improvement. Signed-off-by: Guillermo A. Amaral <g@maral.me>
90e72bf4	2018-01-30T18:08:34	Fixed ISO C99 compatibility SDL now builds with gcc 7.2 with the following command line options: -Wall -pedantic-errors -Wno-deprecated-declarations -Wno-overlength-strings --std=c99
35554caf	2018-01-17T13:17:10	Make rpi video cross-compiler friendly. * Stops using fixed path to find GLES/EGL libs. * Tries pkg-config to locate bcm_host. Signed-off-by: Guillermo A. Amaral <g@maral.me>
61261e59	2018-01-16T21:29:32	EGL: Request sRGB framebuffer in correct place. The EGL_GL_COLORSPACE_KHR is an attribute for eglCreate*Surface. As written in EGL_KHR_gl_colorspace documentation: Accepted as an attribute name by eglCreateWindowSurface, eglCreatePbufferSurface and eglCreatePixmapSurface EGL_GL_COLORSPACE_KHR 0x309D (...)
e3cc5b2c	2018-01-03T10:03:25	Updated copyright for 2018
57ebc727	2017-12-04T20:35:01	Fixed bug 3975 - Add GLES2 support for macOS via ANGLE library Andrey Seems latest google angle library successfully built & tested under macOS'es. https://github.com/google/angle We need to use GLES2 to implement true cross-platform code.
67950e10	2017-12-03T20:27:08	Fixed name of eglCreatePbufferSurface function
e943d1ce	2017-12-03T20:25:55	Fixed bug 3945 - Add eglCreatePbufferSurface function tomwardio Proposed patch loads eglCreatePbufferSurface in same manner as other 1.1 functors. This allows custom video drivers to create pbuffer surfaces.
7334a2a1	2017-11-04T09:07:33	Fixed bug 3940 - Add support for EGL_SURFACE_TYPE tomwardio Add support to be able to set EGL_SURFACE_TYPE bits when creating an EGL config. This is usefule when wanting to create pixel buffer surfaces in custom video drivers.
bf3e363d	2017-11-04T09:04:19	Raspberry Pi: fix ES 1/PVR support & autodetect Mesa driver * The brcmGLESv2 vendor library also supports ES PVR/1 profiles * Fallback to standard Mesa libraries if the VC4 driver is loaded
e564da78	2017-09-29T10:15:44	revert files I didnt mean to commit!
e27f12e0	2017-09-29T10:07:37	wayland: Fix bug 3814 -Wmissing-field-initializers
466ba57d	2017-09-21T18:38:07	[egl/mir] Need eglGetProc to find gl 4.5 core profile extensions
0c892abc	2017-09-06T19:34:23	raspberrypi: The latest Raspbian moved its EGL and GLES2 libs elsewhere. Now we try the new (hardware-specific) pathnames first, and if those fail to load, we'll try the more generic names that earlier versions of Raspbian used. Fixes Bugzilla #3800.
21e32bac	2017-08-29T16:30:49	egl: Cast to size_t, in case platform's NativeDisplayType isn't a pointer. (fixes compiler warnings on QNX.)
003d491f	2017-08-27T19:05:57	Fixed bug 3724 - Allow Angle Static Link Carlos We would like to add a switch (define) that allows us to compile Angle statically with SDL. That is, getting rid of the OpenGL DLL. Usually you need OpenGL to be loaded dynamically as DLL because implementation is provided by the system but no need with Angle. Only 2 files need modification and it shouldn't affect current behaivor: include/SDL_egl.h and src/video/SDL_egl.c, as in here https://github.com/native-toolkit/sdl/pull/10/files The flag name could be SDL_VIDEO_STATIC_ANGLE (instead of NATIVE_TOOLKIT_STATIC_ANGLE) as discussed here https://github.com/native-toolkit/sdl/pull/10 We have tested this with both Windows and UWP, using NME engine (https://github.com/haxenme/nme). Releated issue: https://bugzilla.libsdl.org/show_bug.cgi?id=1820
685890a2	2017-08-24T22:57:42	Fix KHR_no_error support
d8fc70ea	2017-08-24T21:30:53	opengl: add support for GL_KHR_no_error. This is completely untested! Fixes Bugzilla #3721.
96305832	2017-08-11T10:21:19	Fixed bug 3702 - Clear error messages of SDL_LoadObject for optional libraries Simon Hug Some code in SDL loads libraries with SDL_LoadObject to get more information or use newer APIs. SDL_LoadObject may fail, set an error message and SDL will continue with some fallback code. Since SDL will overwrite the error or exit the function with a return value that indicates success, the error form SDL_LoadObject for the optional stuff might as well be cleared right away.
27de835d	2017-08-05T22:10:55	emscripten: Fixed compiler warnings about integer to pointer conversions. Found by buildbot.
56363ebf	2017-08-02T10:22:48	Fixed bug 3690 - SDL2 KMS/DRM render context support Manuel The attached patch adds support for KMS/DRM context graphics. It builds with no problem on X86_64 GNU/Linux systems, provided the needed libraries are present, and on ARM GNU/Linux systems that have KMS/DRM support and a GLES2 implementation. Tested on Raspberry Pi: KMS/DRM is what the Raspberry Pi will use as default in the near future, once the propietary DispmanX API by Broadcom is overtaken by open graphics stack, it's possible to boot current Raspbian system in KMS mode by adding "dtoverlay=vc4-kms-v3d" to config.txt on Raspbian's boot partition. X86 systems use KMS right away in every current GNU/Linux system. Simple build instructions: $./autogen.sh $./configure --enable-video-kmsdrm $make
9171f71d	2017-02-10T09:41:16	Fixed warning in Android build
67ed8943	2017-01-01T19:10:36	Fixed bug 3529 - SDL_EGL_UnloadLibrary is not called at all on SDL_Quit kaisyu In case of OpenGLES, the sequences of loading and unloading driver library should be like that: SDL_Init ... SDL_GL_LoadLibrary SDL_EGL_LoadLibrary ... SDL_Quit ... SDL_GL_UnloadLibrary SDL_EGL_UnloadLibrary ... However, according to my test results, the varible '_this->gl_config.driver_loaded' does not allow 'SDL_GL_UnloadLibrary' to call 'SDL_EGL_UnloadLibrary'.
45b774e3	2017-01-01T18:33:28	Updated copyright for 2017
0cfa0aa1	2016-12-29T11:49:18	improved SDL_GetError() output generated by EGL code This change attempts to report the EGL error codes generated by SDL's calls into EGL, along with the name of the EGL function that failed.
fed8cbcd	2016-12-09T05:00:35	Fixed build for EGL platforms
5d5127c4	2016-10-04T03:38:39	Fixed compiler warning - this should have been a const char pointer
748b0528	2016-05-11T21:10:41	EGL: Fixed SDL_GL_GetSwapInterval() returning -1 on error. It should return 0 as a safe default on errors. -1 is returned for late swaps.
42065e78	2016-01-02T10:10:34	Updated copyright to 2016
5a3cc7f5	2015-08-01T15:16:57	EGL: Added support for sRGB system framebuffers, when the required EGL extension is present.
e93f90ae	2015-07-30T10:01:04	Trivial integer truncation warning fixes.
72590685	2015-06-21T19:36:35	Backed out changeset 4ad56dbf4a6f
0e45984f	2015-06-21T17:33:46	Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
a4f0daed	2015-05-26T19:34:56	EGL: OpenGL ES 3.0 contexts can now be created without the EGL_KHR_create_context extension. Fixes bugzilla #2994.
2c4a6ea0	2015-05-26T06:27:46	Updated the copyright year to 2015
7de242e7	2015-05-13T22:39:20	Added SDL_SetWindowsMessageHook() to facilitate full IME support on Windows
f1a7c00d	2015-05-11T21:03:36	Refactored SDL_EGL_CreateContext: It now supports context flags and OpenGL ES 3+ contexts, and its behavior more closely matches the GLX and WGL context creation code. Improved the code style consistency of SDL_egl.c. Fixes bugzilla #2865.
b72938c8	2015-04-20T12:22:44	Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.
fe6c797c	2015-04-10T23:30:31	Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.
b88ca1b4	2015-02-10T16:28:56	the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802
b48e54aa	2015-01-26T22:00:29	Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.
70438be2	2014-12-03T10:55:23	WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!
9c398852	2014-11-22T22:20:40	Corrected header file documentation comment.
251ca855	2014-10-15T09:18:17	Expanded the iMX6 video driver into a general Vivante video driver that works across multiple SoCs
3b70f65d	2014-10-15T09:13:36	Fixed bug where EGL function pointers wouldn't get saved in optimized gcc builds
24c86b55	2014-09-11T19:24:42	[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam
1ee96bb9	2014-07-07T10:26:28	Fixed mingw64 build and warnings
5a3c553d	2014-07-03T17:36:08	Maybe fixes bug #2291 (red tinted screen on some Samsung Android devices) Then again, maybe not!
765894e3	2014-06-28T13:05:16	Better fix to support EGL_KHR_create_context and not fail to build on Android ...or Raspberry Pi (EGL < 1.4 systems)
a9bb8898	2014-06-28T12:48:29	Disable desktop OpenGL for EGL under Android
02e9f81e	2014-06-28T12:17:29	SDL_egl: allow creation of versioned OpenGL contexts with EGL_KHR_create_context If the EGL extension EGL_KHR_create_context is available, we can use it to set the core/compatability profile and the minimum OpenGL version. Use this if it is available to get the context requested by the GL attributes.
9e55ace8	2014-06-16T09:47:23	Fixes #2583, clean up EGL initialization
536dd013	2014-05-10T16:13:22	Fixes #2519, clear error if using the default library path for EGL succeeds.
b6148092	2014-05-06T15:08:43	eglGetProcAddress fails the same way on MIR as ANDROID does on arm. Thanks Sylvain Becker for the patch!
d2fb8a2a	2014-04-26T11:23:55	Better compiler for Windows XP systems
a5ce57bc	2014-04-23T13:47:52	Fixed compiler warning
acbc321c	2014-04-23T13:47:42	Don't try to load d3dcompiler_46.dll on Windows XP
3dcb451f	2014-04-09T21:29:19	Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.
b51a3206	2014-03-22T20:48:18	WinRT: Got OpenGL ES 2 working with the latest version of ANGLE/WinRT. SDL/WinRT did have support for OpenGL ES 2 via an older version of ANGLE/WinRT, however its API changed a few months ago, and SDL/WinRT would crash when trying to use it. It would also occasionally crash when using the older version. This changeset should make SDL/WinRT work with the latest version, as available via MS Open Tech's git repository of it at https://github.com/msopentech/angle Older versions of ANGLE/WinRT (from either https://github.com/stammen/angleproject or https://bitbucket.org/DavidLudwig/angleproject) will need to be updated to MS Open Tech's latest version.
1367bf87	2014-03-09T11:36:47	Integrated David Ludwig's support for Windows RT
58edac3e	2014-02-02T00:53:27	Fixed bug 2374 - Update copyright for 2014... Is it that time already??
c0d86b92	2014-01-14T21:29:38	Make EGL loading more resilient. Lesson learned while trying to run L4D2 under Wayland :)
ec1cb49e	2013-12-14T20:18:43	Wayland support Based on the original port to Wayland by: Joel Teichroeb, Benjamin Franzke, Scott Moreau, et al. Additional changes in this commit, done by me: * Wayland uses the common EGL framework * EGL can now create a desktop OpenGL context * testgl2 loads GL functions dynamically, no need to link to libGL anymore * Assorted fixes to the Wayland backend Tested on the Weston Compositor (v1.0.5) that ships with Ubuntu 13.10, running Weston under X. Tests ran: testrendercopyex (all backends), testgl2, testgles2,testintersections
4a8c2967	2013-12-13T09:48:12	Context sharing for EGL
013d9982	2013-12-02T23:54:35	Fixed error return value in SDL_EGL_CreateSurface(), thanks to Mike Kasprzak
7d9e42f2	2013-12-02T10:08:57	Select EGL config when creating the EGL surface
f848adff	2013-11-29T10:06:08	Improve Android pause/resume behavior.
ecfbb3f5	2013-11-28T22:59:21	WinRT: got the SDL-official OpenGL ES 2 changes working, in an experimental state
7e1289af	2013-11-24T23:56:17	Make internal SDL sources include SDL_internal.h instead of SDL_config.h The new header will include SDL_config.h, but allows for other global stuff.
61959aa6	2013-11-22T13:24:53	OpenGL ES support for Windows
131a0725	2013-11-19T11:04:05	Find the best EGL config available between those returned by eglChooseConfig This existed in the old Android Java code, it got lost in the migration to the commong EGL code.

e758dd53

2020-09-10T15:02:00

egl: Make SDL_EGL_HasExtension() available outside of SDL_egl.c.

8709f67e

2020-09-08T08:42:30

Fixed bug 5215 - Fixing filenames passed to dlopen for OpenBSD Brad Smith Attached is a patch to use the proper filenames when trying to dlopen the respective shared libraries on OpenBSD.

1a5503ce

2020-07-28T21:11:25

kmsdrm: Moved to the ATOMIC KMS/DRM interface for buffer swapping, leaving DRM-legacy behind.

8babda2c

2020-07-16T13:18:19

egl: SDL_EGL_LoadLibaryOnly() shouldn't set _this->gl_config.driver_loaded = 1 This is handled in in the higher-level SDL_GL_LoadLibrary(). All uses of SDL_EGL_LoadLibrary (which calls the Only version) are just target-specific wrappers for their own GL_LoadLibrary hook, with two exceptions which now handle driver_loaded correctly (although it's questionable if these init-if-no-one-did-it-correctly-already code blocks should exist at all, fwiw). Fixes Bugzilla #5190.

132f87c3

2020-04-13T22:06:12

opengl: Don't try to do Desktop OpenGL stuff if support isn't available.

e96b05c3

2020-04-13T18:21:28

egl: Attempt to make this compile on WinRT, etc.

c0a875fa

2020-04-13T14:48:38

SDL_EGL_ChooseConfig: don't fall through if no matching format exists On Raspberry Pi 3 via the VC4 driver in firmware KMS mode, none of the found configs match the desired format, causing the function to fall through without any config being selected. Fix by first iterating over the found configs, and if no match exists, don't exclude the non-matching configs. This should fix RPI3 and possibly other targets without breaking targets that have a matching native format (such as RPI4).

64617d25

2020-04-13T14:45:40

opengl: Convert an int to an SDL_bool.

389c8995

2020-04-13T14:44:21

opengl: Allow SDL_GL_MakeCurrent() to accept a NULL window (thanks, Martin!). This allows you to bind surfaceless contexts on a background thread to, for example, load assets in a separate context, for platforms that have different requirements about sharing surfaces, etc. Martin's notes on the matter: "Here's a patch that enables passing NULL windows to SDL_GL_MakeCurrent, if the involved APIs allow it. Currently, this is only the case for EGL, and even then only if some specific extensions are present (which they usually are). If "surfaceless" contexts are not supported, SDL_GL_MakeCurrent continues to generate an error (albeit with a more specific error message than it used to), so this should not break anything that wasn't broken before." (Please see https://bugzilla.libsdl.org/show_bug.cgi?id=3695 for more discussion.) Fixes Bugzilla #3695.

b6afbe63

2020-04-07T09:38:57

Added SDL_log.h to SDL_internal.h so logging is available everywhere

90f9e8f8

2020-03-20T15:13:09

egl: Don't use SDL_LoadFunction to get GL entry points on Emscripten. This results in a dlsym() call, which causes Emscripten to panic if the game wasn't explicitly built dlopen support. eglGetProcAddress works just fine on this platform, so just let that codepath handle it.

a8780c6a

2020-01-16T20:49:25

Updated copyright date for 2020

3a8b8994

2019-10-23T11:07:11

Android: remove eglGetProcAdded busted comment (bug #4040)

24bee6e5

2019-10-18T21:47:30

Add internal function SDL_EGL_GetVersion()

e5bd2003

2019-10-18T14:08:07

Android: enable eglGetProcAddress (bug #4040, bug #4794)

03f27a3a

2019-10-18T13:27:58

Add robustness getting the EGL version (see bug #4040)

3ecce847

2019-10-18T00:07:32

egl: adjust how we load symbols in SDL_EGL_GetProcAddress. Use eglGetProcAddress for everything on EGL >= 1.5. Try SDL_LoadFunction first for EGL <= 1.4 in case it's a core symbol, and as a fallback if eglGetProcAddress fails. Finally, for EGL <= 1.4, fallback to eglGetProcAddress to catch extensions not exported from the shared library. (Maybe) Fixes Bugzilla #4794.

ee6d504a

2019-09-24T17:49:53

offscreen: Define missing define on a older EGL for an EXT function which it wont have

8a41948e

2019-09-24T17:27:51

offscreen: Avoid using EGLDeviceEXT as it causes issues with older platforms, which is just a void*

68985371

2019-09-24T16:36:48

offscreen: Add new video driver backend Offscreen The Offscreen video driver is intended to be used for headless rendering as well as allows for multiple GPUs to be used for headless rendering Currently only supports EGL (OpenGL / ES) or Framebuffers Adds a hint to specifiy which EGL device to use: SDL_HINT_EGL_DEVICE Adds testoffscreen.c which can be used to test the backend out Disabled by default for now

2b6473dc

2019-06-08T15:10:20

Fixed bug 4533 - Update ANGLE to load d3dcompiler_47.dll instead of d3dcompiler_46.dll msmshazan Update ANGLE Libraries to support d3dcompiler_47.dll since chrome does not ship with d3dcompiler_46.dll and d3dcompiler_43.dll

5e13087b

2019-01-04T22:01:14

Updated copyright for 2019

a95f91bc

2019-01-02T18:06:33

Fixed bug 3250 - Wrong backbuffer pixel format on Android, keep getting RGB_565 Use the egl format to reconfigure java SurfaceView holder format. If there is a change, it triggers a surfaceDestroyed/Created/Change sequence.

aeee424f

2018-10-31T15:16:51

Fixed bug 4349 - SDL_CreateWindow fails with KMS/DRM after upgrading Mesa to 18.2.3 Rainer Sabelka After I did an upgrade of my arch Linux installation (resulting in an update of Mesa to version 18.2.3), all my SDL2 applications which use the KMS/DRM driver stopped working. Reason: Creating a Window with SDL_CreateWindow failed because the call to EGL eglCreateWindowSurface() returns an error "EGL_BAD_MATCH". After investigating with the debugger I figured, that the configuration, which has been selected from the output of eglChooseConfig(), has an "EGL_NATIVE_VISUAL_ID" which does not match the "format" of the underlying gbm surface. The attached patch fixes the problem. It does so, by mimicking Weston's behavior. All configurations returned from eglChooseConfig() which have an visual_id different from the gbm format are discarded, and only from the remaining ones the "best" match is selected.

95579f5f

2018-10-01T09:40:58

Fixed bug 4220 - SDL_GL_CONTEXT_DEBUG_FLAG can fail silently on some Android devices

5febdfce

2018-09-24T11:49:25

Fixed whitespace

fe682827

2018-06-14T06:12:12

egl: Don't change context when deleting current. If we change the current context behind the app's back, those tracking the current context to minimize context changes are going to get confused. This brings the EGL backend in line with the GLX one. Fixes Bugzilla #4199.

999af809

2018-05-18T13:09:30

Merged latest changes from Steam Link app

40b27fd5

2018-02-12T17:00:00

revert the recent typecast assignment changes (see bug #4079) also change the void* typedefs for the two vulkan function pointers added in vulkan_internal.h into generic function pointer typedefs.

bd0def06

2018-02-07T14:12:26

Set rpath instead of changing environment for RPi Credit goes to Adrian Perez de Castro for the improvement. Signed-off-by: Guillermo A. Amaral <g@maral.me>

90e72bf4

2018-01-30T18:08:34

Fixed ISO C99 compatibility SDL now builds with gcc 7.2 with the following command line options: -Wall -pedantic-errors -Wno-deprecated-declarations -Wno-overlength-strings --std=c99

35554caf

2018-01-17T13:17:10

Make rpi video cross-compiler friendly. * Stops using fixed path to find GLES/EGL libs. * Tries pkg-config to locate bcm_host. Signed-off-by: Guillermo A. Amaral <g@maral.me>

61261e59

2018-01-16T21:29:32

EGL: Request sRGB framebuffer in correct place. The EGL_GL_COLORSPACE_KHR is an attribute for eglCreate*Surface. As written in EGL_KHR_gl_colorspace documentation: Accepted as an attribute name by eglCreateWindowSurface, eglCreatePbufferSurface and eglCreatePixmapSurface EGL_GL_COLORSPACE_KHR 0x309D (...)

e3cc5b2c

2018-01-03T10:03:25

Updated copyright for 2018

57ebc727

2017-12-04T20:35:01

Fixed bug 3975 - Add GLES2 support for macOS via ANGLE library Andrey Seems latest google angle library successfully built & tested under macOS'es. https://github.com/google/angle We need to use GLES2 to implement true cross-platform code.

67950e10

2017-12-03T20:27:08

Fixed name of eglCreatePbufferSurface function

e943d1ce

2017-12-03T20:25:55

Fixed bug 3945 - Add eglCreatePbufferSurface function tomwardio Proposed patch loads eglCreatePbufferSurface in same manner as other 1.1 functors. This allows custom video drivers to create pbuffer surfaces.

7334a2a1

2017-11-04T09:07:33

Fixed bug 3940 - Add support for EGL_SURFACE_TYPE tomwardio Add support to be able to set EGL_SURFACE_TYPE bits when creating an EGL config. This is usefule when wanting to create pixel buffer surfaces in custom video drivers.

bf3e363d

2017-11-04T09:04:19

Raspberry Pi: fix ES 1/PVR support & autodetect Mesa driver * The brcmGLESv2 vendor library also supports ES PVR/1 profiles * Fallback to standard Mesa libraries if the VC4 driver is loaded

e564da78

2017-09-29T10:15:44

revert files I didnt mean to commit!

e27f12e0

2017-09-29T10:07:37

wayland: Fix bug 3814 -Wmissing-field-initializers

466ba57d

2017-09-21T18:38:07

[egl/mir] Need eglGetProc to find gl 4.5 core profile extensions

0c892abc

2017-09-06T19:34:23

raspberrypi: The latest Raspbian moved its EGL and GLES2 libs elsewhere. Now we try the new (hardware-specific) pathnames first, and if those fail to load, we'll try the more generic names that earlier versions of Raspbian used. Fixes Bugzilla #3800.

21e32bac

2017-08-29T16:30:49

egl: Cast to size_t, in case platform's NativeDisplayType isn't a pointer. (fixes compiler warnings on QNX.)

003d491f

2017-08-27T19:05:57

Fixed bug 3724 - Allow Angle Static Link Carlos We would like to add a switch (define) that allows us to compile Angle statically with SDL. That is, getting rid of the OpenGL DLL. Usually you need OpenGL to be loaded dynamically as DLL because implementation is provided by the system but no need with Angle. Only 2 files need modification and it shouldn't affect current behaivor: include/SDL_egl.h and src/video/SDL_egl.c, as in here https://github.com/native-toolkit/sdl/pull/10/files The flag name could be SDL_VIDEO_STATIC_ANGLE (instead of NATIVE_TOOLKIT_STATIC_ANGLE) as discussed here https://github.com/native-toolkit/sdl/pull/10 We have tested this with both Windows and UWP, using NME engine (https://github.com/haxenme/nme). Releated issue: https://bugzilla.libsdl.org/show_bug.cgi?id=1820

685890a2

2017-08-24T22:57:42

Fix KHR_no_error support

d8fc70ea

2017-08-24T21:30:53

opengl: add support for GL_KHR_no_error. This is completely untested! Fixes Bugzilla #3721.

96305832

2017-08-11T10:21:19

Fixed bug 3702 - Clear error messages of SDL_LoadObject for optional libraries Simon Hug Some code in SDL loads libraries with SDL_LoadObject to get more information or use newer APIs. SDL_LoadObject may fail, set an error message and SDL will continue with some fallback code. Since SDL will overwrite the error or exit the function with a return value that indicates success, the error form SDL_LoadObject for the optional stuff might as well be cleared right away.

27de835d

2017-08-05T22:10:55

emscripten: Fixed compiler warnings about integer to pointer conversions. Found by buildbot.

56363ebf

2017-08-02T10:22:48

Fixed bug 3690 - SDL2 KMS/DRM render context support Manuel The attached patch adds support for KMS/DRM context graphics. It builds with no problem on X86_64 GNU/Linux systems, provided the needed libraries are present, and on ARM GNU/Linux systems that have KMS/DRM support and a GLES2 implementation. Tested on Raspberry Pi: KMS/DRM is what the Raspberry Pi will use as default in the near future, once the propietary DispmanX API by Broadcom is overtaken by open graphics stack, it's possible to boot current Raspbian system in KMS mode by adding "dtoverlay=vc4-kms-v3d" to config.txt on Raspbian's boot partition. X86 systems use KMS right away in every current GNU/Linux system. Simple build instructions: $./autogen.sh $./configure --enable-video-kmsdrm $make

9171f71d

2017-02-10T09:41:16

Fixed warning in Android build

67ed8943

2017-01-01T19:10:36

Fixed bug 3529 - SDL_EGL_UnloadLibrary is not called at all on SDL_Quit kaisyu In case of OpenGLES, the sequences of loading and unloading driver library should be like that: SDL_Init ... SDL_GL_LoadLibrary SDL_EGL_LoadLibrary ... SDL_Quit ... SDL_GL_UnloadLibrary SDL_EGL_UnloadLibrary ... However, according to my test results, the varible '_this->gl_config.driver_loaded' does not allow 'SDL_GL_UnloadLibrary' to call 'SDL_EGL_UnloadLibrary'.

45b774e3

2017-01-01T18:33:28

Updated copyright for 2017

0cfa0aa1

2016-12-29T11:49:18

improved SDL_GetError() output generated by EGL code This change attempts to report the EGL error codes generated by SDL's calls into EGL, along with the name of the EGL function that failed.

fed8cbcd

2016-12-09T05:00:35

Fixed build for EGL platforms

5d5127c4

2016-10-04T03:38:39

Fixed compiler warning - this should have been a const char pointer

748b0528

2016-05-11T21:10:41

EGL: Fixed SDL_GL_GetSwapInterval() returning -1 on error. It should return 0 as a safe default on errors. -1 is returned for late swaps.

42065e78

2016-01-02T10:10:34

Updated copyright to 2016

5a3cc7f5

2015-08-01T15:16:57

EGL: Added support for sRGB system framebuffers, when the required EGL extension is present.

e93f90ae

2015-07-30T10:01:04

Trivial integer truncation warning fixes.

72590685

2015-06-21T19:36:35

Backed out changeset 4ad56dbf4a6f

0e45984f

2015-06-21T17:33:46

Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().

a4f0daed

2015-05-26T19:34:56

EGL: OpenGL ES 3.0 contexts can now be created without the EGL_KHR_create_context extension. Fixes bugzilla #2994.

2c4a6ea0

2015-05-26T06:27:46

Updated the copyright year to 2015

7de242e7

2015-05-13T22:39:20

Added SDL_SetWindowsMessageHook() to facilitate full IME support on Windows

f1a7c00d

2015-05-11T21:03:36

Refactored SDL_EGL_CreateContext: It now supports context flags and OpenGL ES 3+ contexts, and its behavior more closely matches the GLX and WGL context creation code. Improved the code style consistency of SDL_egl.c. Fixes bugzilla #2865.

b72938c8

2015-04-20T12:22:44

Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.

fe6c797c

2015-04-10T23:30:31

Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.

b88ca1b4

2015-02-10T16:28:56

the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802

b48e54aa

2015-01-26T22:00:29

Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.

70438be2

2014-12-03T10:55:23

WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!

9c398852

2014-11-22T22:20:40

Corrected header file documentation comment.

251ca855

2014-10-15T09:18:17

Expanded the iMX6 video driver into a general Vivante video driver that works across multiple SoCs

3b70f65d

2014-10-15T09:13:36

Fixed bug where EGL function pointers wouldn't get saved in optimized gcc builds

24c86b55

2014-09-11T19:24:42

[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam

1ee96bb9

2014-07-07T10:26:28

Fixed mingw64 build and warnings

5a3c553d

2014-07-03T17:36:08

Maybe fixes bug #2291 (red tinted screen on some Samsung Android devices) Then again, maybe not!

765894e3

2014-06-28T13:05:16

Better fix to support EGL_KHR_create_context and not fail to build on Android ...or Raspberry Pi (EGL < 1.4 systems)

a9bb8898

2014-06-28T12:48:29

Disable desktop OpenGL for EGL under Android

02e9f81e

2014-06-28T12:17:29

SDL_egl: allow creation of versioned OpenGL contexts with EGL_KHR_create_context If the EGL extension EGL_KHR_create_context is available, we can use it to set the core/compatability profile and the minimum OpenGL version. Use this if it is available to get the context requested by the GL attributes.

9e55ace8

2014-06-16T09:47:23

Fixes #2583, clean up EGL initialization

536dd013

2014-05-10T16:13:22

Fixes #2519, clear error if using the default library path for EGL succeeds.

b6148092

2014-05-06T15:08:43

eglGetProcAddress fails the same way on MIR as ANDROID does on arm. Thanks Sylvain Becker for the patch!

d2fb8a2a

2014-04-26T11:23:55

Better compiler for Windows XP systems

a5ce57bc

2014-04-23T13:47:52

Fixed compiler warning

acbc321c

2014-04-23T13:47:42

Don't try to load d3dcompiler_46.dll on Windows XP

3dcb451f

2014-04-09T21:29:19

Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.

b51a3206

2014-03-22T20:48:18

WinRT: Got OpenGL ES 2 working with the latest version of ANGLE/WinRT. SDL/WinRT did have support for OpenGL ES 2 via an older version of ANGLE/WinRT, however its API changed a few months ago, and SDL/WinRT would crash when trying to use it. It would also occasionally crash when using the older version. This changeset should make SDL/WinRT work with the latest version, as available via MS Open Tech's git repository of it at https://github.com/msopentech/angle Older versions of ANGLE/WinRT (from either https://github.com/stammen/angleproject or https://bitbucket.org/DavidLudwig/angleproject) will need to be updated to MS Open Tech's latest version.

1367bf87

2014-03-09T11:36:47

Integrated David Ludwig's support for Windows RT

58edac3e

2014-02-02T00:53:27

c0d86b92

2014-01-14T21:29:38

Make EGL loading more resilient. Lesson learned while trying to run L4D2 under Wayland :)

ec1cb49e

2013-12-14T20:18:43

Wayland support Based on the original port to Wayland by: Joel Teichroeb, Benjamin Franzke, Scott Moreau, et al. Additional changes in this commit, done by me: * Wayland uses the common EGL framework * EGL can now create a desktop OpenGL context * testgl2 loads GL functions dynamically, no need to link to libGL anymore * Assorted fixes to the Wayland backend Tested on the Weston Compositor (v1.0.5) that ships with Ubuntu 13.10, running Weston under X. Tests ran: testrendercopyex (all backends), testgl2, testgles2,testintersections

4a8c2967

2013-12-13T09:48:12

Context sharing for EGL

013d9982

2013-12-02T23:54:35

Fixed error return value in SDL_EGL_CreateSurface(), thanks to Mike Kasprzak

7d9e42f2

2013-12-02T10:08:57

Select EGL config when creating the EGL surface

f848adff

2013-11-29T10:06:08

Improve Android pause/resume behavior.

ecfbb3f5

2013-11-28T22:59:21

WinRT: got the SDL-official OpenGL ES 2 changes working, in an experimental state

7e1289af

2013-11-24T23:56:17

Make internal SDL sources include SDL_internal.h instead of SDL_config.h The new header will include SDL_config.h, but allows for other global stuff.

61959aa6

2013-11-22T13:24:53

OpenGL ES support for Windows

131a0725

2013-11-19T11:04:05

Find the best EGL config available between those returned by eglChooseConfig This existed in the old Android Java code, it got lost in the migration to the commong EGL code.

kc3-lang/SDL/src/video/SDL_egl.c

src/video/SDL_egl.c

Log