|
5e78bc64
|
2017-01-21T22:00:40
|
|
Fixed copyright symbol in testgles2 program.
|
|
a395a907
|
2017-01-20T16:40:11
|
|
Fixed mapping the PG-9021 which, on Linux, emits a button partway through the trigger press along with axis motion all along the pull
|
|
|
8fa0b088
|
2017-01-20T08:13:23
|
|
Added support for the 8Bitdo Zero GamePad
|
|
|
9b99265a
|
2017-01-19T20:19:37
|
|
Fixed mingw64 32-bit build, which does have the correct structure definitions
|
|
|
f3540242
|
2017-01-18T12:19:57
|
|
Removed unused variable
|
|
|
b0c5ceef
|
2017-01-18T12:18:50
|
|
Fixed bug 3533 - Enumeration joystick devices omitted during directinput enumeration
white.magic
The logic which decides if a device enumerated via the direct input system in the function EnumJoysticksCallback in SDL_dinputjoystick.c is processed is discarding valid joystick devices due to the assumption that devices of the type DI8DEVTYPE_SUPPLEMENTAL are not valid devices.
This change was added with 2.0.4 with this commit http://hg.libsdl.org/SDL/rev/1b9d40126645 that is linked to this bug report https://bugzilla.libsdl.org/show_bug.cgi?id=2460 which indicates that in that case devices of the type DI8DEVTYPE_SUPPLEMENTAL were not desirable as they caused a singular device to emit multiple "device added" events.
Since then there appear to have been a few fixes to handle devices that fall into various other classes in the following two commits:
http://hg.libsdl.org/SDL/rev/10ffb4787d7a and http://hg.libsdl.org/SDL/rev/6a2bbac05728
Two devices I have reports of failing to be listed when the DI8DEVTYPE_SUPPLEMENTAL type is excluded are ECS Gametric Throttle and Thrustmaster MFD Cougar.
Sam Lantinga
I verified that the OUYA controller shows up as a single device with this change, so I've reverted the change to ignore supplemental devices, leaving framework in place to easily add devices that we want to ignore.
|
|
|
dd007e3f
|
2017-01-18T11:58:16
|
|
Fixed bug 3561 - Re-acquire device before playing effects if needed.
Mathieu Laurendeau
Check the result of IDirectInputEffect_SetParameters and re-acquire the device to solve concurrency issues.
|
|
|
5cb1ca55
|
2017-01-18T11:57:27
|
|
Fixed building with mingw32
|
|
3e1679c8
|
2017-01-18T02:11:56
|
|
audio: Several fixes to "simple" resampler (thanks, Vitaly!).
Fixes Bugzilla #3551.
|
|
|
95defd66
|
2017-01-17T21:18:31
|
|
Use icon width * sizeof(Uint32) instead of icon pitch when copying to icon resource data
|
|
|
57182930
|
2017-01-16T00:58:28
|
|
audio: Implemented SIMD support for audio data type converters.
This currently adds an SSE2 implementation (but it's #ifdef'd out for now,
until it's hooked up to the configure script and such).
|
|
|
1e66d457
|
2017-01-15T05:01:59
|
|
audio: Some fixes to the audio data type converter code.
Removed some needless things ("len / sizeof (Uint8)"), and made sure the
int32 -> float code uses doubles to avoid working with large integer values
in a 32-bit float.
|
|
|
1e482095
|
2017-01-14T21:36:06
|
|
Fixed comments.
|
|
|
06d1d945
|
2017-01-14T21:35:49
|
|
Fixed doxygen warning and linking of function names.
|
|
|
a812b4eb
|
2017-01-14T21:35:18
|
|
Changed Bugzilla link in README.md to HTTPS like in BUGS.txt.
|
|
|
2b481015
|
2017-01-14T21:34:45
|
|
Fixed warnings about missing initializers in testoverlay2 program.
|
|
|
341d1ff9
|
2017-01-13T11:37:12
|
|
Fixed comment
|
|
01f66613
|
2017-01-12T10:58:35
|
|
fixed SENSOR_LANDSCAPE and SENSOR_PORTRAIT mode false nativeResume bug
|
|
|
acd76826
|
2017-01-10T23:23:32
|
|
We don't actually build with the Xt library
|
|
|
a52d48c5
|
2017-01-10T08:54:33
|
|
Fixed bugs 2570, 3145, improved OpenGL ES context support on Windows and X11
Mark Callow
The attached patch does the following for the X11 and Windows platforms, the only ones where SDL attempts to use context_create_es_profile:
- Adds SDL_HINT_OPENGL_ES_DRIVER by which the application can
say to use the OpenGL ES driver & EGL rather than the Open GL
driver. (For bug #2570)
- Adds code to {WIN,X11}_GL_InitExtensions to determine the maximum
OpenGL ES version supported by the OpenGL driver (for bug #3145)
- Modifies the test that determines whether to use the OpenGL
driver or the real OpenGL ES driver to take into account the
hint, the requested and supported ES version and whether ES 1.X
is being requested. (For bug #2570 & bug #3145)
- Enables the testgles2 test for __WINDOWS__ and __LINUX__ and adds
the test to the VisualC projects.
With the fix in place I have run testdraw2, testgl and testgles2 without any issues and have run my own apps that use OpenGL, OpenGL ES 3 and OpenGL ES 1.1.
|
|
|
bf11cd50
|
2017-01-09T20:37:52
|
|
Fixed bug 3552 - Building SDL in release mode fails under VS 2017 RC
Lukasz Biel
Tried to compile SDL2 using newest version of VS.
Got:
SDL_audiocvt.obj : error LNK2019: unresolved external symbol memcpy referenced in function SDL_ResampleCVT
1>E:\Users\dotPo\Lib\SDL\VisualC\x64\Release\SDL2.dll : fatal error LNK1120: 1 unresolved externals
whole compilation process: http://pastebin.com/eWDAvBce
Steps to reproduce:
clone http://hg.libsdl.org/SDL using tortoise hg,
open SDL\VisualC\SDL.sln,
when promted if should retarget solution click ok,
select release x64 build type,
Build/Build Solution
attempt 2, using Visual Studio cmake support:
open folder SDL\
select release x64 build type,
run CMake\Build CMakeLists.txt
build fails
When switched to debug build type, buils succeeds in both cases.
VS 2017 is still beta.
|
|
|
23020f92
|
2017-01-09T16:31:57
|
|
audio: Don't ever use libsamplerate in the SDL_AudioCVT codepath.
It causes audio pops if you're converting in chunks (and needs to
allocate/initialize/free on each convert). We'll either adjust this interface
when we break ABI for 2.1 to make this usable, or publish the SDL_AudioStream
API for those that want a streaming solution.
In the meantime, the "simple" resampler produces "good enough" audio without
pops and doesn't have to be initialized, so that'll do for now on the
SDL_AudioCVT interface.
|
|
|
97f19cc3
|
2017-01-09T15:56:11
|
|
testresample: write correct length to the .wav header.
|
|
|
ad7c26ff
|
2017-01-09T11:58:01
|
|
We only need the first few keymaps corresponding to the following constants:
K_NORMTAB, K_SHIFTTAB, K_ALTTAB, K_ALTSHIFTTAB
In the normal case we'll load all the keymaps from the kernel, but this reduces the size of the SDL library for the fallback case when we can't get to the tty.
|
|
|
6d6edcb8
|
2017-01-09T11:30:29
|
|
Fixed spacing
|
|
|
4e9c9fce
|
2017-01-09T10:10:33
|
|
Fixed bug 3100 - SetSwapInterval should now be enabled for ANGLE/EGL
Mark Logan 2015-08-24 15:57:50 UTC
In SDL_windowsopengles.c, WIN_GLES_SetSwapInterval is as follows:
WIN_GLES_SetSwapInterval(_THIS, int interval)
{
/* FIXME: This should call SDL_EGL_SetSwapInterval, but ANGLE has a bug that prevents this
* from working if we do (the window contents freeze and don't swap properly). So, we ignore
* the request for now.
*/
SDL_Log("WARNING: Ignoring SDL_GL_SetSwapInterval call due to ANGLE bug");
return 0;
}
With a recent version of ANGLE (early July) calling SDL_EGL_SetSwapInterval with a D3D11 backend appears to work just fine. I am working on testing this with D3D9.
--
Alex Szpakowski
I found the bug, it was fixed in 2013. https://bugs.chromium.org/p/angleproject/issues/detail?id=481
In my opinion it should be safe to unconditionally use SetSwapInterval now. Anyone who encounters the bug should update their ANGLE to a version less than 3 years old, especially since they'd be using a SDL version that's 3+ years newer than their ANGLE version.
|
|
|
063c9d40
|
2017-01-09T06:00:58
|
|
audio: Replaced older resamplers in SDL_AudioCVT with the new ones.
|
|
|
a41103b1
|
2017-01-09T05:59:30
|
|
audio: Patched to compile if linking directly to libsamplerate.
|
|
|
e0a40fb6
|
2017-01-09T02:54:42
|
|
Implemented full evdev keyboard text support
This is based on the Linux kernel driver, and has fallback mapping tables in case we aren't connected to a virtual terminal.
|
|
|
49292705
|
2017-01-08T20:03:18
|
|
Fixed bug 3545 - SDL_EVDEV_do_text_input() may be too eager to find error cases
Rob
I've ran into an issue where I successfully receive SDL_KEY[UP,DOWN] events but not SDL_TEXTINPUT or SDL_TEXTEDITING. In my case the code in SDL_EVDEV_do_text_input() is returning early (on error) prior to calling SDL_SendKeyboardText(). I'm running on the RaspberryPi 3, without X11.
In SDL_EVDEV_do_text_input() there is a condition to check keysyms with a type value below 0xf0, then subtract 0xf0 from type. Without understanding the purpose of this code, I disabled it, recompiled, and I'm getting correct SDL_TEXTINPUT events. I'm going to guess that my hack/fix is going to be problematic in some other environment, but after some initial testing it looks like everything is running fine in my setup.
|
|
|
7b66295e
|
2017-01-08T19:04:38
|
|
Removed console check, let the kernel decide whether muting is appropriate on this terminal.
We don't fail the init if we can't mute the terminal (we might be running from ssh, or on a system without virtual terminals, etc.)
|
|
|
c16dd74f
|
2017-01-08T18:32:20
|
|
Check the return value of SDL_EVDEV_Init()
|
|
|
38854e03
|
2017-01-08T16:18:49
|
|
audio: Improvements in channel conversion code.
|
|
|
35166609
|
2017-01-08T14:28:44
|
|
audio: Patched to compile with libsamplerate support (again).
|
|
|
d005dc21
|
2017-01-08T14:23:15
|
|
audio: Patched to compile with libsamplerate support.
|
|
|
19e937fc
|
2017-01-08T14:18:03
|
|
audio: libsamplerate loading now happens once at init time.
|
|
|
98cc9d10
|
2017-01-08T14:17:09
|
|
Fixed coding style on a function signature.
|
|
|
53588ff6
|
2017-01-08T14:16:19
|
|
README-linux: added notes about libsamplerate.
|
|
|
25b47ea3
|
2017-01-08T10:52:02
|
|
Fixed attempting to dynamically load libsamplerate when shared object loading is disabled.
Thanks to Ozkan Sezer for pointing this out
|
|
|
9d9e92cf
|
2017-01-08T10:41:22
|
|
Fixed bug 3304 - Android black screen on resume
Richard Russell
Resuming from a suspended state results in a black screen. This only happens when using GLES 1.1 (GLES 2 resumes correctly) and when the render target has been changed using SDL_SetRenderTarget. This problem is new in 2.0.4.
The attached test case demonstrates the issue.
Sylvain Becker has apparently found a fix as follows:
"In the opengles leaf function (in 'src/render/opengles/SDL_render_gles.c'), it appears there is a call to 'GLES_ActivateRenderer' in 'GLES_SetRenderTarget', which is not present in opengles2. When commenting out this 'GLES_ActivateRenderer', it seems to resume fine".
This appears to fix the testcase perfectly, but I don't know whether it could have any undesirable side-effects.
|
|
|
b8ab4eb9
|
2017-01-08T10:15:22
|
|
SDL_evdev.c: fix building against old kernel headers (K_OFF may not be defined.)
|
|
|
70c8bd24
|
2017-01-07T22:24:45
|
|
Fixed a bunch of compiler warnings in the test code.
|
|
|
13f2e542
|
2017-01-07T19:55:29
|
|
x11: make the X11 target work on macOS with Xquartz.
|
|
|
e25f4e50
|
2017-01-07T16:51:48
|
|
Really fixed blit issue for capehill
|
|
|
7e505b0d
|
2017-01-07T16:49:23
|
|
Don't fail if we can't open the tty, this can be a legitimate use case.
|
|
|
61a3ba30
|
2017-01-07T17:09:14
|
|
Replaced a few single-line "//" comments.
|
|
|
267c9509
|
2017-01-07T13:47:34
|
|
Added mappings for the 8Bitdo NES30 Pro and iBuffalo SNES Controller
Also swapped the Wii U Pro controller button mappings to position instead of label, as emulators expect from XBox controllers.
|
|
|
e9c2dcda
|
2017-01-07T10:13:04
|
|
Fixed bug 3469 - Keypresses leak to the console with 2.0.5
tvc
I believe this patch should fix it, instead of looping through all the tty's and seemingly selecting the wrong one and corrupting the console I've just made SDL open /dev/tty which is the console attached to the current process anyway.
|
|
|
df25258a
|
2017-01-06T20:43:53
|
|
Added configure and cmake support for libsamplerate
|
|
|
c5825b69
|
2017-01-06T21:23:51
|
|
audio: Don't call a NULL function pointer when clearing audio streams.
(Partially?) fixes Bugzilla #3547.
|
|
|
c1ac4c68
|
2017-01-06T21:17:33
|
|
Better fix for static analysis issue in SDL_DestroyRenderer().
Follow up fix for Bugzilla #3544.
|
|
|
5fcd454a
|
2017-01-06T20:00:17
|
|
emscripten-buildbot.sh: let user override default SDKDIR.
|
|
|
cbe44f7f
|
2017-01-06T02:16:26
|
|
Added support for using libsamplerate to do audio resampling
|
|
|
37f404fb
|
2017-01-06T00:47:42
|
|
Fixed confusion between Ryan's new audio stream and the audio buffer we were calling stream in the callback
|
|
|
3df77ced
|
2017-01-06T00:40:22
|
|
Just roll back the entire portion of the commit from a8253d439914 which caused bug 3544 until we figure out what the right static analysis fix is.
|
|
|
748f4605
|
2017-01-06T03:38:14
|
|
audio: Add an assert to make sure non-streaming audio uses good buffer sizes.
|
|
|
356c2ead
|
2017-01-06T00:32:06
|
|
Fixed bug 3544 - Memory freeing bug in SDL_DestroyRenderer/SDL_DestroyTexture
felix
Here's a snippet of SDL_DestroyRenderer from hg revision 10746:7540ff5d0e0e:
SDL_Texture *texture = NULL;
SDL_Texture *nexttexture = NULL;
/* ... */
for (texture = renderer->textures; texture; texture = nexttexture) {
nexttexture = texture->next;
SDL_DestroyTexture(texture);
}
SDL_DestroyTexture removes the texture from the linked list pointed to by the renderer and ends up calling SDL_DestroyTextureInternal, which contains this:
if (texture->native) {
SDL_DestroyTexture(texture->native);
}
If it happens that texture->native is an alias of nexttexture two stack frames up, SDL_DestroyRenderer will end up trying to destroy an already freed texture. I've had this very situation happen in dosemu2.
Bug introduced in revision 10650:a8253d439914, which has a somewhat ironic description of "Fixed all known static analysis bugs"...
|
|
|
345c5989
|
2017-01-06T03:15:27
|
|
haiku: Patched to compile.
|
|
|
3443dc19
|
2017-01-05T23:53:46
|
|
Don't do any audio conversion if none is necessary
|
|
|
41be9756
|
2017-01-05T23:26:13
|
|
Fixed bug 3546 - SDL_EVDEV_is_console() uses type of wrong size when calling ioctl
Rob
When calling ioctl(fd, KDGKBTYPE, &type) in SDL_EVDEV_is_console(), we declare type as an 'int'. This should be a 'char'. The subsequent syscall, and kernel code, only writes the lower byte of the word.
See: http://lxr.free-electrons.com/source/drivers/tty/vt/vt_ioctl.c?v=4.4#L399
ucval = KB_101;
ret = put_user(ucval, (char __user *)arg);
I've observed intermittent behavior related to this, and I can force an error condition by using an int initialized to 0xFFFFFFFF. The resulting ioctl will set type to 0XFFFFFF02, and the conditional return in SDL_EVDEV_is_console() will fail.
Recommend changing to char, or masking off unused bits.
|
|
|
b3e8db80
|
2017-01-06T01:07:34
|
|
audio: rename fake_stream to work_buffer.
It's more than an alternative for when the OS can't provide a DMA buffer, now.
|
|
|
992124d4
|
2017-01-06T01:02:58
|
|
audio: Fixed SDL_AudioStreamGet() function parameters.
There was a draft of this where it did audio conversion into the final buffer,
if there was enough room available past what you asked for, but that interface
got removed, so the parameters didn't make sense (and we were using the
wrong one in any case, too!).
|
|
|
99fc1ef9
|
2017-01-06T00:56:29
|
|
naclaudio: Untested attempt to migrate to SDL_AudioStream.
|
|
|
115d0ce7
|
2017-01-06T00:50:01
|
|
haikuaudio: Untested attempt to get this working with SDL_AudioStream.
|
|
|
1a90c72d
|
2017-01-06T00:49:35
|
|
emscriptenaudio: don't get stuck in infinite loop if SDL_AudioStreamPut fails.
|
|
|
f07a1a5a
|
2017-01-05T21:31:02
|
|
emscriptenaudio: Reworked to use SDL_AudioStream.
|
|
|
3761b5f6
|
2017-01-05T20:11:19
|
|
Fixed a few compiler warnings.
|
|
|
4aa9e369
|
2017-01-05T19:45:57
|
|
Patched to compile on some compilers.
|
|
|
52130bde
|
2017-01-05T19:30:45
|
|
diskaudio: Use SDL_Log, not fprintf.
|
|
|
30178a9b
|
2017-01-05T19:29:38
|
|
audio: Added SDL_AudioStream. Non-power-of-two resampling now works!
|
|
|
f12ab8f2
|
2017-01-05T19:12:20
|
|
audio: More effort to improve and simplify audio resamplers.
|
|
|
d024c724
|
2017-01-05T08:16:39
|
|
Fixed signedness issue when blitting on a big endian platform, as reported by capehill
For example, if sR is 0 and dR is 255, we will get -255*sA casted to an unsigned value. Basically results are quite large numbers instead of the expected 0-255 range.
|
|
|
e6e6613c
|
2017-01-05T02:53:29
|
|
Fixed build warning on Haiku
|
|
|
4938c505
|
2017-01-04T10:28:07
|
|
Added SDL_JoystickGetAxisInitialState() to get a joystick axis' initial value.
This is useful for controller mapping programs to determine an axis' zero state
|
|
|
99e10ef5
|
2017-01-04T07:06:48
|
|
Assume D-pad or thumbstick style axes are centered at 0
|
|
|
9d042052
|
2017-01-04T09:33:47
|
|
x11: deal with xrandr display size in millimeters being zero.
Xquartz on macOS reports a zero size, which leads to a division by zero here.
|
|
|
26f84d74
|
2017-01-04T06:21:17
|
|
Added mappings for several GameCube and SNES controllers
|
|
|
d2a01b6e
|
2017-01-04T06:19:56
|
|
Added the NEXT SNES Controller to the list of zero-centered joysticks
|
|
|
c7780497
|
2017-01-04T05:56:47
|
|
Increased joystick jitter tolerance for PS3 controllers
|
|
|
1ddff75c
|
2017-01-04T05:09:02
|
|
Some controllers have trouble getting out to 20000
|
|
|
082132a7
|
2017-01-03T23:39:28
|
|
Fixed binding the D-pad on some Super NES style controllers
Fixed a case where partial trigger pull could be bound to another button
There is a fundamental problem not resolved by this commit:
Some controllers have axes (triggers, pedals, etc.) that don't start at zero, but we're guaranteed that if we get a value that it's correct. For these controllers, the current code works, where we take the first value we get and use that as the zero point and generate axis motion starting from that point on.
Other controllers have digital axes (D-pad) that assume a zero starting point, and the first value we get is the min or max axis value when the D-pad is moved. For these controllers, the current code thinks that the zero point is the axis value after the D-pad motion and this doesn't work.
My hypothesis is that the first class of devices is more common and that we should solve for that, and add an exception to SDL_JoystickAxesCenteredAtZero() as needed for the second class of devices.
|
|
|
d3591800
|
2017-01-03T00:44:05
|
|
Fixed bug 3519 - SDL_GetDisplayMode fails to report mode.format when using Wayland backend
Ryan C. Gordon
Kristian says you can't do it with Wayland, and that going forward, it'll just handle whatever you throw at it anyhow.
https://twitter.com/hoegsberg/status/816148272402165761
So I say we mark it SDL_PIXELFORMAT_RGB888, which is what my X11 display currently reports, and leave it at that.
|
|
|
18d9b23c
|
2017-01-02T10:30:32
|
|
Fixed bug 3539 - SDL2, missing MIR LDFLAGS
Gianfranco
Hello, this is the failure I got
https://launchpadlibrarian.net/300679206/buildlog_ubuntu-zesty-amd64.libsdl2_2.0.5+dfsg1-2ubuntu1_BUILDING.txt.gz
LTLINK build/libSDL2.la
build/.libs/SDL_mirvideo.o: In function `MIR_InitDisplayFromOutput':
././src/video/mir/SDL_mirvideo.c:258: undefined reference to `mir_output_get_current_mode'
collect2: error: ld returned 1 exit status
|
|
|
67ed8943
|
2017-01-01T19:10:36
|
|
Fixed bug 3529 - SDL_EGL_UnloadLibrary is not called at all on SDL_Quit
kaisyu
In case of OpenGLES, the sequences of loading and unloading driver library should be like that:
SDL_Init
...
SDL_GL_LoadLibrary
SDL_EGL_LoadLibrary
...
SDL_Quit
...
SDL_GL_UnloadLibrary
SDL_EGL_UnloadLibrary
...
However, according to my test results, the varible '_this->gl_config.driver_loaded' does not allow 'SDL_GL_UnloadLibrary' to call 'SDL_EGL_UnloadLibrary'.
|
|
|
0badbdde
|
2017-01-01T18:47:29
|
|
Run sed in binary mode so we don't have to worry about fixing line endings
|
|
|
9e6d729e
|
2017-01-01T18:36:35
|
|
Fixed typo in copyright update script
|
|
|
45b774e3
|
2017-01-01T18:33:28
|
|
Updated copyright for 2017
|
|
|
0f586d58
|
2017-01-01T18:32:57
|
|
Convert some files back into DOS line endings after updating copyright
|
|
|
49225f5f
|
2016-12-31T18:11:19
|
|
We don't currently support blitting to < 8 bpp surfaces, return an error instead of corrupting memory in that case.
|
|
|
2ba66d05
|
2016-12-31T16:21:55
|
|
Fixed bug 3535 - Misplaced comment #if/#endif closure comment
Coriiander
This notice is about a misplaced comment.
Often times when we use an #if #endif sequence, the #endif is followed by a comment to indicate what #if statement it belonged to. The SDL_xaudio2.c file contains a misplaced comment, as follows (I stripped the other comments):
#ifdef __GNUC__
# define SDL_XAUDIO2_HAS_SDK 1
#elif defined(__WINRT__)
# define SDL_XAUDIO2_HAS_SDK
#include "SDL_xaudio2.h"
#else
#if 0
#include <dxsdkver.h>
#if (!defined(_DXSDK_BUILD_MAJOR) || (_DXSDK_BUILD_MAJOR < 1284))
# pragma message("Your DirectX SDK is too old. Disabling XAudio2 support.")
#else
# define SDL_XAUDIO2_HAS_SDK 1
#endif
#endif
#endif /* 0 */
That final /* 0 */ should be moved one line up. Like this (I tabbed it out for you to make it more clear):
|
|
|
880842cf
|
2016-12-31T16:14:51
|
|
Fixed bug 3531 - internal SDL_vsnprintf implementation access memory outside given buffer ranges
Tristan
The internal SDL_vsnprintf implementation accesses memory outside buffer. The bug existed also inside the format (%) processing, which was fixed with Bug 3441.
But there is still an invalid access, if we do not have any format inside the source string and the destination string is shorter than the format string. You can use any string for this test, as long it is longer than the buffer.
Example:
va_list argList;
char buffer[4];
SDL_vsnprintf(buffer, sizeof(buffer), "Testing", argList);
The bug is located on the 'else' branch of the format char test:
while (*fmt) {
if (*fmt == '%') {
...
} else {
if (left > 1) {
*text = *fmt;
--left;
}
++fmt;
++text;
}
}
if (left > 0) {
*text = '\0';
}
As you can see that text is always incremented, even when left is already one. When then on the last lines, *text is assigned the NULL char, the pointer is located outside bounds.
|
|
|
7f2068da
|
2016-12-31T10:30:07
|
|
Fixed bug 3541 - DisplayIndex out of bounds in SDL_SetWindowPosition
Intellectual Kitty
In SDL_video.c, on line #1756, in SDL_SetWindowPosition (from today's distribution, 12-31-2016, https://hg.libsdl.org/SDL/shortlog/bf19e0c84483):
if (displayIndex > _this->num_displays) {
should be:
if (displayIndex >= _this->num_displays) {
|
|
|
e61daa72
|
2016-12-30T19:57:50
|
|
Fixed warning and missing animation delay in testoverlay2 program.
|
|
0cfa0aa1
|
2016-12-29T11:49:18
|
|
improved SDL_GetError() output generated by EGL code
This change attempts to report the EGL error codes generated by SDL's calls
into EGL, along with the name of the EGL function that failed.
|
|
|
c2b90f2d
|
2016-12-28T20:11:29
|
|
Fixed compiling of testgamecontroller program with C++.
|
|
|
de79828b
|
2016-12-28T20:11:12
|
|
Fixed warning about unused variable in controllermap program.
|
|
|
af263798
|
2016-12-28T20:10:48
|
|
Fixed crash if allocating memory for game controller failed.
|
|
|
2e2572a4
|
2016-12-27T23:48:43
|
|
Added SDL_ReserveSpaceInDataQueue() to make space without copying data.
|
|
|
8000e6d9
|
2016-12-27T09:59:36
|
|
Added documentation for the game controller axis values
|
|
|
21cb42d7
|
2016-12-27T09:51:58
|
|
Make sure we go all the way back (within the XBox controller dead zone) to prevent accidentally binding axes inverted
|