kmx git

Commit	Date	Message
5ed3d21f	2020-12-24T00:55:30	testsem.c: fix -Wmissing-braces warnings.
2b040ceb	2020-12-23T13:36:23	Atomic test: Fix use after free SDL_SemPost() was called by the FIFO threads after the semaphore was freed because the main thread actually synchronized on the `writerRunning`/`readersRunning` count and not the semaphores itself.
6267b951	2020-12-23T13:36:02	Semaphore test: Add overhead tests.
95a6d4e8	2020-12-23T13:35:35	Semaphore test: Put test into separate function.
090fffac	2020-12-24T00:29:40	test/Makefile.os2: add warning switches to CFLAGS.
239c8f1f	2020-12-24T00:28:50	testvulkan.c: fix -Wmissing-braces warnings. also fix whitespace.
20ca1192	2020-12-24T00:26:32	testgesture.c: comment out unused drawLine()
b064028c	2020-12-24T00:25:40	testatomic.c: fix warnings due to SDL_AtomicDecRef() use
390b2cf0	2020-12-22T20:53:27	Enable PS5 enhanced functionality for testgamecontroller
058a0ab4	2020-12-22T14:38:32	Set the pad lights on the PS5 controller corresponding to the player index Also allow setting the player index from testgamecontroller using the number keys
b4b674da	2020-12-22T22:10:50	CMakeLists.txt: sync DYLIB_CURRENT_VERSION to Xcode project
350f1b0d	2020-12-22T10:36:15	Updated SDL to version 2.0.15 for development
9f655fe5	2020-12-22T17:03:20	regenerated configure
86191351	2020-12-22T17:00:28	acinclude & sdl2.m4 updates: - acinclude/alsa.m4, esd.m4: Ran through autoupdate to replace several AC_TRY_[COMPILE\|LINK\|RUN] with corresponding AC_???_IFELSE , so that autoconf-2.70 doesn't warn. - sdl2.m4: Ditto. - test/acinclude.m4 (sdl2): Ditto.
f117db51	2020-12-22T17:00:11	sdl2.m4 updates: - remove HP/UX 9 (%@#!) support - change fopen() mode from "a" to "w" in test code. - bump its serial num to 2. - test/acinclude.m4: same sdl2.m4 updates.
537f824f	2020-12-21T20:40:10	test/Makefile.os2: wlib must run case-sensitively.
67e9132d	2020-12-20T12:22:28	Fixed circular dependency problem when building in the test directory
5c654d0d	2020-12-18T17:00:00	tests: regenerate configure using autoconf patched for AC_PATH_X11 Specifically this patch which does not invoke _AC_PATH_X_XMKMF and _AC_PATH_X_DIRECT internal autoconf routines when cross-compiling: http://git.savannah.gnu.org/gitweb/?p=autoconf.git;a=commitdiff;h=33c3a47c04ab70a4dd54963fe433a171bc03747f Without this, CFLAGS would brokenly have system include paths like -I/usr/include/X11 when cross-compiling e.g. for windows. (And it also resulted in annoying imake crashes for my setup...)
716ac535	2020-12-15T01:20:00	test/acinclude.m4: rename SDL_CONFIG to SDL2_CONFIG, regenerate configure
44d4a61d	2020-12-14T08:11:40	minor cleanups to configure.ac to reduce autoconf-2.70 warnings a bit. configure output is practically unchanged. there are still lots of AC_TRY_COMPILE/AC_TRY_LINK replacements needed to really eliminate the warnings, but that's for another time.
f1cab8ae	2020-12-10T11:20:56	fix bug #5253: handle NULL title or message fields in SDL_MessageBoxData - SDL_video.c (SDL_ShowMessageBox): replace messageboxdata, set title or message field to "" if either of them is NULL. - SDL_video.c (SDL_ShowSimpleMessageBox): set title or message to "" if either of them is NULL for EMSCRIPTEN builds. - SDL_bmessagebox.cc: add empty string check along with NULL check for title and message fields. - SDL_windowsmessagebox.c (AddDialogString): remove NULL string check - SDL_windowsmessagebox.c (AddDialogControl): add empty string check along with the NULL check. - SDL_x11messagebox.c: revert commit 677c4cd68069 - SDL_os2messagebox.c: revert commit 2c2a489d76e7 - test/testmessage.c: Add NULL title and NULL message tests.
3c68051e	2020-12-04T15:47:28	Allow background input when testing game controllers
04f0fd13	2020-11-27T18:57:42	Remember to close the game controller when we're done with it
012471e9	2020-11-27T18:57:38	Open and test all connected controllers
24cc0012	2020-11-25T16:05:15	Some controllers don't always reset their triggers to zero when they are released (e.g. Xbox One S in Bluetooth mode), so only trigger rumble if the trigger is pulled halfway or more.
e16afa79	2020-11-24T16:38:49	Automatically switch to testing a new controller when it's plugged in
34bea84a	2020-11-23T23:03:55	Fixed bug 5335 - Patch: enable joystick/haptic/evdev support by default on FreeBSD Alex S Ah, that's not quite enough. You need to: 1. rename src/joystick/bsd/SDL_sysjoystick.c to something; 2. regenerate configure.
04b45b55	2020-11-23T14:28:30	Allow testing a specific controller
ff4bc138	2020-11-23T14:28:16	Fixed mapping controllers after adding the touchpad button
75721b19	2020-11-21T18:01:23	Allow testing effects on PS4 controllers Note, this will switch the controller into advanced report mode which breaks DirectInput on Windows
fcb21aa8	2020-11-17T10:30:20	Added API for sensors on game controllers Added support for the PS4 controller gyro and accelerometer on iOS and HIDAPI drivers Also fixed an issue with the accelerometer on iOS having inverted axes
d140d887	2020-11-16T17:36:47	Added SDL_JoystickGetSerial() and SDL_GameControllerGetSerial()
fe4da420	2020-11-16T10:39:44	Improve LED color calculation, don't set LED unless left thumbstick is moved
9f51fad3	2020-11-13T18:01:29	Added support for the touchpad on PS4 and PS5 controllers
e749c126	2020-11-12T07:53:01	Fixed overflow in trigger rumble calculation
65847539	2020-11-11T19:15:43	test: Add a unit test for input device classification heuristics This uses pre-recorded evdev capabilities, so that we can check for regressions without the devices having to be physically present. Signed-off-by: Simon McVittie <smcv@collabora.com>
1e2caac5	2020-11-11T18:57:37	Added SDL_JoystickRumbleTriggers() and SDL_GameControllerRumbleTriggers()
c3a32605	2020-11-09T04:55:15	testvulkan: Patched to compile with SDL's internal Vulkan headers.
009b62f1	2020-11-07T02:22:15	Be explicit about mapping the new game controller paddle buttons
5a92edee	2020-11-06T15:54:18	Don't try to map the accelerometer as a game controller
59a644fb	2020-11-06T14:44:26	iOS should use the same size window for the controller tests as other platforms Otherwise the position of the button and axis elements won't be correct
3a3aaac2	2020-11-06T11:30:52	Added 4 auxiliary buttons to the game controller API Xbox Elite controllers use AUX1-AUX4 to represent the paddle buttons when using the HIDAPI driver PS4 and PS5 controllers use AUX1 to represent the touchpad button Nintendo Switch Pro controllers use AUX1 to represent the capture button
e555d453	2020-11-05T11:07:54	Added SDL_JoystickHasLED Currently, this is only supported by the PS4 HIDAPI driver.
d2723875	2020-10-14T23:01:06	os2: integrate the port into main tree.
1d9cf23e	2020-10-14T23:01:05	os2: updated copyright dates for 2020. header guard fixes.
4551c633	2020-10-14T23:01:02	os2: make testnative working -- imported from bitwiseworks' fork: https://github.com/bitwiseworks/SDL2-os2/commit/e2abc76b24c795051d0092cbd425544e73a0713e
74cfb81d	2020-10-14T23:01:00	os2: add port files for SDL2-2.0.4 from Andrey Vasilkin only geniconv/iconv.h (was from LGPL libiconv) is replaced with a generic minimal iconv.h based on public knowledge.
10eb5108	2020-10-11T20:00:20	test/Makefile.os2: add testlocale.exe to build.
b7b2995f	2020-10-05T15:27:32	url: Added to Visual Studio project files.
77c9d73b	2020-10-05T11:30:33	Removed SDL_AndroidOpenURL, added SDL_OpenURL. Still needs to be wired into Xcode and Visual Studio projects.
0e98040d	2020-06-28T16:23:05	joystick: Linux joysticks now recover better from dropped events. Fixes Bugzilla #4830.
50fd0dd1	2020-06-26T21:35:54	test: testspriteminimal wasn't calling SDL_Quit() on exit.
fa23e3d0	2020-05-04T02:27:29	locale: Implemented SDL_GetPreferredLocales(). This was something I proposed a long time ago, Sylvain Becker did additional work on it, then back to me. Fixes Bugzilla #2131.
aba27928	2020-04-18T21:41:37	Added a Windows Gaming Input joystick driver This driver supports the Razer Atrox Arcade Stick Some of the quirks of this driver, inherent in Windows Gaming Input: * There will never appear to be controllers connected at startup. You must support hot-plugging in order to see these controllers. * You can't read the state of the guide button * You can't get controller events in the background
ef147d2e	2020-04-13T08:13:50	Enable virtual joystick API by default
3d942ccc	2020-04-08T09:02:02	Removed debug code
09f55263	2020-04-08T09:00:10	Fixed memory leak and removed debug code from Windows sensor implementation
89fe32dd	2020-04-05T08:46:59	Fixed bug 5072 - Test resources missing when building with SDL_TEST and CMake DominikD There are several tests that need resources in the output directory to work: * `testiconv` depends on `utf8.txt` * `testoverlay2` and `teststreaming` depend on `moose.dat` This patch adds these two files to the `RESOURCE_FILES` variable. One could also copy `shapes\.bmp` over to the output directory for `testshape` to use but this patch doesn't do that for three reasons: executable takes path as an argument and doesn't need these files side by side * these are ~45MB and copying them over would cause build directory to swell * there are already files in the output directory that can be used with this test (`sample.bmp` and `button.bmp`)
377f2d35	2020-04-01T13:43:53	configure: Remove wayland-protocols check from configure and CMake scripts. We ship these with SDL now, don't need the system versions installed.
c760c02c	2020-03-25T01:34:15	Fix some format specifier warnings The warnings were produced by GCC 9.2.x for x86_64-linux-gnu or i386-pc-msdosdjgpp targets. Most of the fixes involve changing the type of a variable rather than the format specifier. For many of the affected test conuter variables, a basic int seems sufficient. Some format specifier warnings still remain for cases where changing type or casting seemed inappropriate. Those warnings will probably require some new format specifier macros (e.g. SDL_PRIu32).
2be75c6a	2020-03-13T19:08:45	Fixed bug 5028 - Virtual Joysticks (new joystick backend) David Ludwig I have created a new driver for SDL's Joystick and Game-Controller subsystem: a Virtual driver. This driver allows one to create a software-based joystick, which to SDL applications will look and react like a real joystick, but whose state can be set programmatically. A primary use case for this is to help enable developers to add touch-screen joysticks to their apps. The driver comes with a set of new, public APIs, with functions to attach and detach joysticks, set virtual-joystick state, and to determine if a joystick is a virtual-one. Use of virtual joysticks goes as such: 1. Attach one or more virtual joysticks by calling SDL_JoystickAttachVirtual. If successful, this returns the virtual-device's joystick-index. 2. Open the virtual joysticks (using indicies returned by SDL_JoystickAttachVirtual). 3. Call any of the SDL_JoystickSetVirtual* functions when joystick-state changes. Please note that virtual-joystick state will only get applied on the next call to SDL_JoystickUpdate, or when pumping or polling for SDL events (via SDL_PumpEvents or SDL_PollEvent). Here is a listing of the new, public APIs, at present and subject to change: ------------------------------------------------------------ /** * Attaches a new virtual joystick. * Returns the joystick's device index, or -1 if an error occurred. / extern DECLSPEC int SDLCALL SDL_JoystickAttachVirtual(SDL_JoystickType type, int naxes, int nballs, int nbuttons, int nhats); /* * Detaches a virtual joystick * Returns 0 on success, or -1 if an error occurred. / extern DECLSPEC int SDLCALL SDL_JoystickDetachVirtual(int device_index); /* * Indicates whether or not a virtual-joystick is at a given device index. / extern DECLSPEC SDL_bool SDLCALL SDL_JoystickIsVirtual(int device_index); /* * Set values on an opened, virtual-joystick's controls. * Returns 0 on success, -1 on error. / extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualAxis(SDL_Joystick joystick, int axis, Sint16 value); extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualBall(SDL_Joystick * joystick, int ball, Sint16 xrel, Sint16 yrel); extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualButton(SDL_Joystick * joystick, int button, Uint8 value); extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualHat(SDL_Joystick * joystick, int hat, Uint8 value); ------------------------------------------------------------ Miscellaneous notes on the initial patch, which are also subject to change: 1. no test code is present in SDL, yet. This should, perhaps, change. Initial development was done with an ImGui-based app, which potentially is too thick for use in SDL-official. If tests are to be added, what kind of tests? Automated? Graphical? 2. virtual game controllers can be created by calling SDL_JoystickAttachVirtual with a joystick-type of SDL_JOYSTICK_TYPE_GAME_CONTROLLER, with naxes (num axes) set to SDL_CONTROLLER_AXIS_MAX, and with nbuttons (num buttons) set to SDL_CONTROLLER_BUTTON_MAX. When updating their state, values of type SDL_GameControllerAxis or SDL_GameControllerButton can be casted to an int and used for the control-index (in calls to SDL_JoystickSetVirtual* functions). 3. virtual joysticks' guids are mostly all-zeros with the exception of the last two bytes, the first of which is a 'v', to indicate that the guid is a virtual one, and the second of which is a SDL_JoystickType that has been converted into a Uint8. 4. virtual joysticks are ONLY turned into virtual game-controllers if and when their joystick-type is set to SDL_JOYSTICK_TYPE_GAMECONTROLLER. This is controlled by having SDL's default list of game-controllers have a single entry for a virtual game controller (of guid, "00000000000000000000000000007601", which is subject to the guid-encoding described above). 5. regarding having to call SDL_JoystickUpdate, either directly or indirectly via SDL_PumpEvents or SDL_PollEvents, before new virtual-joystick state becomes active (as specified via SDL_JoystickSetVirtual* function-calls), this was done to match behavior found in SDL's other joystick drivers, almost all of which will only update SDL-state during SDL_JoystickUpdate. 6. the initial patch is based off of SDL 2.0.12 7. the virtual joystick subsystem is disabled by default. It should be possible to enable it by building with SDL_JOYSTICK_VIRTUAL=1 Questions, comments, suggestions, or bug reports very welcome!
de2001ee	2020-03-13T13:05:40	Fixed binding the D-PAD on the 8BitDo M30 controller
611403dd	2020-03-08T21:02:40	Clarified that the clip rectangle is defined relative to the viewport, and added a clip test to testviewport.c
25061816	2020-03-02T10:58:08	Fixed compile warning
033aa51d	2020-02-13T22:58:04	testfilesystem: Don't exit the application if SDL_GetBasePath isn't supported
8f1a916a	2020-02-13T20:50:47	Add basic support for compiling on RISC OS
80cf4f07	2020-02-08T19:34:51	test: Improved detection of OpenGL support
dd0ebfdf	2020-02-07T11:45:32	Use the triggers to test rumble for more fine grained vibration feedback
0a7fe18f	2020-01-17T11:06:02	On Mac OSX there are spurious hat events at program start, so skip these
a8780c6a	2020-01-16T20:49:25	Updated copyright date for 2020
acbf2593	2020-01-13T11:46:17	Emscripten: build fix for testoverlay2.c
46e1377d	2019-12-20T20:12:03	Automatically assign player indexes to game controllers, and allow changing the player index for game controllers and joysticks. Added the functions SDL_JoystickFromPlayerIndex(), SDL_JoystickSetPlayerIndex(), SDL_GameControllerFromPlayerIndex(), and SDL_GameControllerSetPlayerIndex()
8ce894a3	2019-12-05T13:18:56	Ignore axis jitter when mapping controllers
8aaf945b	2019-11-28T11:44:15	Fixed mapping controllers that have axes that start at -32768 and then snap to 0 at the first input report
b5aff9d7	2019-11-22T13:12:12	Added SDL_GameControllerTypeForIndex() and SDL_GameControllerGetType() to return the type of controller attached.
c8896e46	2019-11-21T10:09:26	Turned on controllermap debug output by default
20ddf45e	2019-11-02T22:58:52	Added SDL_PIXELFORMAT_BGR444
68985371	2019-09-24T16:36:48	offscreen: Add new video driver backend Offscreen The Offscreen video driver is intended to be used for headless rendering as well as allows for multiple GPUs to be used for headless rendering Currently only supports EGL (OpenGL / ES) or Framebuffers Adds a hint to specifiy which EGL device to use: SDL_HINT_EGL_DEVICE Adds testoffscreen.c which can be used to test the backend out Disabled by default for now
4e518f98	2019-09-23T17:48:14	CMake: add version strings to Apple Info.plist files This fills in the CFBundleVersion and CFBundleShortVersionString fields, if and when SDL's test-apps are built via CMake. This is needed to install the .app bundles on iOS 13+ (using 'xcrun simctl install booted path/to/testsuchandsuch.app')
32bb8b4b	2019-09-10T10:03:20	test: replace some exit()s with returns.
b13c951c	2019-08-27T11:07:43	CMake: iOS support added When using a recent version of CMake (3.14+), this should make it possible to: - build SDL for iOS, both static and dynamic - build SDL test apps (as iOS .app bundles) - generate a working SDL_config.h for iOS (using SDL_config.h.cmake as a basis) To use, set the following CMake variables when running CMake's configuration stage: - CMAKE_SYSTEM_NAME=iOS - CMAKE_OSX_SYSROOT=<SDK> (examples: iphoneos, iphonesimulator, iphoneos12.4, /full/path/to/iPhoneOS.sdk, etc.) - CMAKE_OSX_ARCHITECTURES=<semicolon-separated list of CPU architectures> (example: "arm64;armv7s") Examples: - for Simulator, using the latest, installed SDK: cmake path/to/SDL -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphonesimulator -DCMAKE_OSX_ARCHITECTURES=x86_64 - for Device, using the latest, installed SDK, 64-bit only cmake path/to/SDL -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphoneos -DCMAKE_OSX_ARCHITECTURES=arm64 - for Device, using the latest, installed SDK, mixed 32/64 bit cmake path/to/SDL -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphoneos -DCMAKE_OSX_ARCHITECTURES="arm64;armv7s" - for Device, using a specific SDK revision (iOS 12.4, in this example): cmake path/to/SDL -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphoneos12.4 -DCMAKE_OSX_ARCHITECTURES=arm64 - for Simulator, using the latest, installed SDK, and building SDL test apps (as .app bundles): cmake path/to/SDL -DSDL_TEST=1 -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphonesimulator -DCMAKE_OSX_ARCHITECTURES=x86_64
6f8910e3	2019-08-04T14:56:02	minor warning fixes.
edc15889	2019-08-03T12:49:50	remove test/aclocal.m4
4953e050	2019-07-31T05:11:40	use SDL_zeroa at more places where the argument is an array.
3fc447df	2019-07-03T02:37:15	Fixed bug 4708 - testdropfile: double-free Juha Niemim?ki SDLTest_CommonEvent seems to free the file name so testdropfile prints some garbage to console and crashes when freeing the name again.
f71454c0	2019-06-11T02:32:43	testoverlay2: Changed some C runtime calls to be SDL equivalents.
b5d3b6fc	2019-05-28T17:39:13	test: unify all the command line usage logging.
00e5eeb4	2019-05-19T01:45:15	test: added SDLTest_CommonDefaultArgs() This is for test apps that don't need custom command line arguments; it lets us reduce the boilerplate code a tiny bit.
18d83093	2019-05-18T23:47:57	test: configure/make shouldn't build GL/GLES1/GLES2 programs if unsupported.
1febfedf	2019-04-02T05:31:08	configure.in: Rename configure.ac to fix an 'aclocal' warning
edebdeb4	2019-03-17T12:45:19	testgesture: Make the background gray. This is so you can see it on systems that have a minimal window manager and a black background.
6727408d	2019-03-15T22:39:31	testgesture: cleaned up code formatting, etc.
7cc0a606	2019-03-15T22:17:21	testgesture: minor cleanups.
5897ed85	2019-03-15T22:16:02	test: Moved testgesture.c over to the common SDLtest framework.
5e13087b	2019-01-04T22:01:14	Updated copyright for 2019
c3e3503e	2018-12-16T01:04:07	testgl2: Press 'o' or 'p' to decrease/increase OpenGL swap interval.
14e389ea	2018-11-20T10:55:00	minor update to Makefile.os2, added a test/Makefile.os2.
e0cc19f2	2018-09-20T15:41:57	testsprite2: report average FPS in blocks of five seconds. This makes the reporting more accurate, vs startup inefficiencies and other scheduling burps.
aae29c9e	2018-09-02T00:35:11	test: Makefile should copy .dat files for testoverlay2.
a794126d	2018-08-24T09:49:48	vulkan: SDL_Vulkan_GetInstanceExtensions should accept a NULL window. Fixes Bugzilla #4235.

5ed3d21f

2020-12-24T00:55:30

testsem.c: fix -Wmissing-braces warnings.

2b040ceb

2020-12-23T13:36:23

Atomic test: Fix use after free SDL_SemPost() was called by the FIFO threads after the semaphore was freed because the main thread actually synchronized on the `writerRunning`/`readersRunning` count and not the semaphores itself.

6267b951

2020-12-23T13:36:02

Semaphore test: Add overhead tests.

95a6d4e8

2020-12-23T13:35:35

Semaphore test: Put test into separate function.

090fffac

2020-12-24T00:29:40

test/Makefile.os2: add warning switches to CFLAGS.

239c8f1f

2020-12-24T00:28:50

testvulkan.c: fix -Wmissing-braces warnings. also fix whitespace.

20ca1192

2020-12-24T00:26:32

testgesture.c: comment out unused drawLine()

b064028c

2020-12-24T00:25:40

testatomic.c: fix warnings due to SDL_AtomicDecRef() use

390b2cf0

2020-12-22T20:53:27

Enable PS5 enhanced functionality for testgamecontroller

058a0ab4

2020-12-22T14:38:32

Set the pad lights on the PS5 controller corresponding to the player index Also allow setting the player index from testgamecontroller using the number keys

b4b674da

2020-12-22T22:10:50

CMakeLists.txt: sync DYLIB_CURRENT_VERSION to Xcode project

350f1b0d

2020-12-22T10:36:15

Updated SDL to version 2.0.15 for development

9f655fe5

2020-12-22T17:03:20

regenerated configure

86191351

2020-12-22T17:00:28

acinclude & sdl2.m4 updates: - acinclude/alsa.m4, esd.m4: Ran through autoupdate to replace several AC_TRY_[COMPILE|LINK|RUN] with corresponding AC_???_IFELSE , so that autoconf-2.70 doesn't warn. - sdl2.m4: Ditto. - test/acinclude.m4 (sdl2): Ditto.

f117db51

2020-12-22T17:00:11

sdl2.m4 updates: - remove HP/UX 9 (%@#!) support - change fopen() mode from "a" to "w" in test code. - bump its serial num to 2. - test/acinclude.m4: same sdl2.m4 updates.

537f824f

2020-12-21T20:40:10

test/Makefile.os2: wlib must run case-sensitively.

67e9132d

2020-12-20T12:22:28

Fixed circular dependency problem when building in the test directory

5c654d0d

2020-12-18T17:00:00

tests: regenerate configure using autoconf patched for AC_PATH_X11 Specifically this patch which does not invoke _AC_PATH_X_XMKMF and _AC_PATH_X_DIRECT internal autoconf routines when cross-compiling: http://git.savannah.gnu.org/gitweb/?p=autoconf.git;a=commitdiff;h=33c3a47c04ab70a4dd54963fe433a171bc03747f Without this, CFLAGS would brokenly have system include paths like -I/usr/include/X11 when cross-compiling e.g. for windows. (And it also resulted in annoying imake crashes for my setup...)

716ac535

2020-12-15T01:20:00

test/acinclude.m4: rename SDL_CONFIG to SDL2_CONFIG, regenerate configure

44d4a61d

2020-12-14T08:11:40

minor cleanups to configure.ac to reduce autoconf-2.70 warnings a bit. configure output is practically unchanged. there are still lots of AC_TRY_COMPILE/AC_TRY_LINK replacements needed to really eliminate the warnings, but that's for another time.

f1cab8ae

2020-12-10T11:20:56

fix bug #5253: handle NULL title or message fields in SDL_MessageBoxData - SDL_video.c (SDL_ShowMessageBox): replace messageboxdata, set title or message field to "" if either of them is NULL. - SDL_video.c (SDL_ShowSimpleMessageBox): set title or message to "" if either of them is NULL for EMSCRIPTEN builds. - SDL_bmessagebox.cc: add empty string check along with NULL check for title and message fields. - SDL_windowsmessagebox.c (AddDialogString): remove NULL string check - SDL_windowsmessagebox.c (AddDialogControl): add empty string check along with the NULL check. - SDL_x11messagebox.c: revert commit 677c4cd68069 - SDL_os2messagebox.c: revert commit 2c2a489d76e7 - test/testmessage.c: Add NULL title and NULL message tests.

3c68051e

2020-12-04T15:47:28

Allow background input when testing game controllers

04f0fd13

2020-11-27T18:57:42

Remember to close the game controller when we're done with it

012471e9

2020-11-27T18:57:38

Open and test all connected controllers

24cc0012

2020-11-25T16:05:15

Some controllers don't always reset their triggers to zero when they are released (e.g. Xbox One S in Bluetooth mode), so only trigger rumble if the trigger is pulled halfway or more.

e16afa79

2020-11-24T16:38:49

Automatically switch to testing a new controller when it's plugged in

34bea84a

2020-11-23T23:03:55

Fixed bug 5335 - Patch: enable joystick/haptic/evdev support by default on FreeBSD Alex S Ah, that's not quite enough. You need to: 1. rename src/joystick/bsd/SDL_sysjoystick.c to something; 2. regenerate configure.

04b45b55

2020-11-23T14:28:30

Allow testing a specific controller

ff4bc138

2020-11-23T14:28:16

Fixed mapping controllers after adding the touchpad button

75721b19

2020-11-21T18:01:23

Allow testing effects on PS4 controllers Note, this will switch the controller into advanced report mode which breaks DirectInput on Windows

fcb21aa8

2020-11-17T10:30:20

Added API for sensors on game controllers Added support for the PS4 controller gyro and accelerometer on iOS and HIDAPI drivers Also fixed an issue with the accelerometer on iOS having inverted axes

d140d887

2020-11-16T17:36:47

Added SDL_JoystickGetSerial() and SDL_GameControllerGetSerial()

fe4da420

2020-11-16T10:39:44

Improve LED color calculation, don't set LED unless left thumbstick is moved

9f51fad3

2020-11-13T18:01:29

Added support for the touchpad on PS4 and PS5 controllers

e749c126

2020-11-12T07:53:01

Fixed overflow in trigger rumble calculation

65847539

2020-11-11T19:15:43

test: Add a unit test for input device classification heuristics This uses pre-recorded evdev capabilities, so that we can check for regressions without the devices having to be physically present. Signed-off-by: Simon McVittie <smcv@collabora.com>

1e2caac5

2020-11-11T18:57:37

Added SDL_JoystickRumbleTriggers() and SDL_GameControllerRumbleTriggers()

c3a32605

2020-11-09T04:55:15

testvulkan: Patched to compile with SDL's internal Vulkan headers.

009b62f1

2020-11-07T02:22:15

Be explicit about mapping the new game controller paddle buttons

5a92edee

2020-11-06T15:54:18

Don't try to map the accelerometer as a game controller

59a644fb

2020-11-06T14:44:26

iOS should use the same size window for the controller tests as other platforms Otherwise the position of the button and axis elements won't be correct

3a3aaac2

2020-11-06T11:30:52

Added 4 auxiliary buttons to the game controller API Xbox Elite controllers use AUX1-AUX4 to represent the paddle buttons when using the HIDAPI driver PS4 and PS5 controllers use AUX1 to represent the touchpad button Nintendo Switch Pro controllers use AUX1 to represent the capture button

e555d453

2020-11-05T11:07:54

Added SDL_JoystickHasLED Currently, this is only supported by the PS4 HIDAPI driver.

d2723875

2020-10-14T23:01:06

os2: integrate the port into main tree.

1d9cf23e

2020-10-14T23:01:05

os2: updated copyright dates for 2020. header guard fixes.

4551c633

2020-10-14T23:01:02

os2: make testnative working -- imported from bitwiseworks' fork: https://github.com/bitwiseworks/SDL2-os2/commit/e2abc76b24c795051d0092cbd425544e73a0713e

74cfb81d

2020-10-14T23:01:00

os2: add port files for SDL2-2.0.4 from Andrey Vasilkin only geniconv/iconv.h (was from LGPL libiconv) is replaced with a generic minimal iconv.h based on public knowledge.

10eb5108

2020-10-11T20:00:20

test/Makefile.os2: add testlocale.exe to build.

b7b2995f

2020-10-05T15:27:32

url: Added to Visual Studio project files.

77c9d73b

2020-10-05T11:30:33

Removed SDL_AndroidOpenURL, added SDL_OpenURL. Still needs to be wired into Xcode and Visual Studio projects.

0e98040d

2020-06-28T16:23:05

joystick: Linux joysticks now recover better from dropped events. Fixes Bugzilla #4830.

50fd0dd1

2020-06-26T21:35:54

test: testspriteminimal wasn't calling SDL_Quit() on exit.

fa23e3d0

2020-05-04T02:27:29

locale: Implemented SDL_GetPreferredLocales(). This was something I proposed a long time ago, Sylvain Becker did additional work on it, then back to me. Fixes Bugzilla #2131.

aba27928

2020-04-18T21:41:37

Added a Windows Gaming Input joystick driver This driver supports the Razer Atrox Arcade Stick Some of the quirks of this driver, inherent in Windows Gaming Input: * There will never appear to be controllers connected at startup. You must support hot-plugging in order to see these controllers. * You can't read the state of the guide button * You can't get controller events in the background

ef147d2e

2020-04-13T08:13:50

Enable virtual joystick API by default

3d942ccc

2020-04-08T09:02:02

Removed debug code

09f55263

2020-04-08T09:00:10

Fixed memory leak and removed debug code from Windows sensor implementation

89fe32dd

2020-04-05T08:46:59

Fixed bug 5072 - Test resources missing when building with SDL_TEST and CMake DominikD There are several tests that need resources in the output directory to work: * `testiconv` depends on `utf8.txt` * `testoverlay2` and `teststreaming` depend on `moose.dat` This patch adds these two files to the `RESOURCE_FILES` variable. One could also copy `shapes\*.bmp` over to the output directory for `testshape` to use but this patch doesn't do that for three reasons: * executable takes path as an argument and doesn't need these files side by side * these are ~45MB and copying them over would cause build directory to swell * there are already files in the output directory that can be used with this test (`sample.bmp` and `button.bmp`)

377f2d35

2020-04-01T13:43:53

configure: Remove wayland-protocols check from configure and CMake scripts. We ship these with SDL now, don't need the system versions installed.

c760c02c

2020-03-25T01:34:15

Fix some format specifier warnings The warnings were produced by GCC 9.2.x for x86_64-linux-gnu or i386-pc-msdosdjgpp targets. Most of the fixes involve changing the type of a variable rather than the format specifier. For many of the affected test conuter variables, a basic int seems sufficient. Some format specifier warnings still remain for cases where changing type or casting seemed inappropriate. Those warnings will probably require some new format specifier macros (e.g. SDL_PRIu32).

2be75c6a

2020-03-13T19:08:45

Fixed bug 5028 - Virtual Joysticks (new joystick backend) David Ludwig I have created a new driver for SDL's Joystick and Game-Controller subsystem: a Virtual driver. This driver allows one to create a software-based joystick, which to SDL applications will look and react like a real joystick, but whose state can be set programmatically. A primary use case for this is to help enable developers to add touch-screen joysticks to their apps. The driver comes with a set of new, public APIs, with functions to attach and detach joysticks, set virtual-joystick state, and to determine if a joystick is a virtual-one. Use of virtual joysticks goes as such: 1. Attach one or more virtual joysticks by calling SDL_JoystickAttachVirtual. If successful, this returns the virtual-device's joystick-index. 2. Open the virtual joysticks (using indicies returned by SDL_JoystickAttachVirtual). 3. Call any of the SDL_JoystickSetVirtual* functions when joystick-state changes. Please note that virtual-joystick state will only get applied on the next call to SDL_JoystickUpdate, or when pumping or polling for SDL events (via SDL_PumpEvents or SDL_PollEvent). Here is a listing of the new, public APIs, at present and subject to change: ------------------------------------------------------------ /** * Attaches a new virtual joystick. * Returns the joystick's device index, or -1 if an error occurred. */ extern DECLSPEC int SDLCALL SDL_JoystickAttachVirtual(SDL_JoystickType type, int naxes, int nballs, int nbuttons, int nhats); /** * Detaches a virtual joystick * Returns 0 on success, or -1 if an error occurred. */ extern DECLSPEC int SDLCALL SDL_JoystickDetachVirtual(int device_index); /** * Indicates whether or not a virtual-joystick is at a given device index. */ extern DECLSPEC SDL_bool SDLCALL SDL_JoystickIsVirtual(int device_index); /** * Set values on an opened, virtual-joystick's controls. * Returns 0 on success, -1 on error. */ extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualAxis(SDL_Joystick * joystick, int axis, Sint16 value); extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualBall(SDL_Joystick * joystick, int ball, Sint16 xrel, Sint16 yrel); extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualButton(SDL_Joystick * joystick, int button, Uint8 value); extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualHat(SDL_Joystick * joystick, int hat, Uint8 value); ------------------------------------------------------------ Miscellaneous notes on the initial patch, which are also subject to change: 1. no test code is present in SDL, yet. This should, perhaps, change. Initial development was done with an ImGui-based app, which potentially is too thick for use in SDL-official. If tests are to be added, what kind of tests? Automated? Graphical? 2. virtual game controllers can be created by calling SDL_JoystickAttachVirtual with a joystick-type of SDL_JOYSTICK_TYPE_GAME_CONTROLLER, with naxes (num axes) set to SDL_CONTROLLER_AXIS_MAX, and with nbuttons (num buttons) set to SDL_CONTROLLER_BUTTON_MAX. When updating their state, values of type SDL_GameControllerAxis or SDL_GameControllerButton can be casted to an int and used for the control-index (in calls to SDL_JoystickSetVirtual* functions). 3. virtual joysticks' guids are mostly all-zeros with the exception of the last two bytes, the first of which is a 'v', to indicate that the guid is a virtual one, and the second of which is a SDL_JoystickType that has been converted into a Uint8. 4. virtual joysticks are ONLY turned into virtual game-controllers if and when their joystick-type is set to SDL_JOYSTICK_TYPE_GAMECONTROLLER. This is controlled by having SDL's default list of game-controllers have a single entry for a virtual game controller (of guid, "00000000000000000000000000007601", which is subject to the guid-encoding described above). 5. regarding having to call SDL_JoystickUpdate, either directly or indirectly via SDL_PumpEvents or SDL_PollEvents, before new virtual-joystick state becomes active (as specified via SDL_JoystickSetVirtual* function-calls), this was done to match behavior found in SDL's other joystick drivers, almost all of which will only update SDL-state during SDL_JoystickUpdate. 6. the initial patch is based off of SDL 2.0.12 7. the virtual joystick subsystem is disabled by default. It should be possible to enable it by building with SDL_JOYSTICK_VIRTUAL=1 Questions, comments, suggestions, or bug reports very welcome!

de2001ee

2020-03-13T13:05:40

Fixed binding the D-PAD on the 8BitDo M30 controller

611403dd

2020-03-08T21:02:40

Clarified that the clip rectangle is defined relative to the viewport, and added a clip test to testviewport.c

25061816

2020-03-02T10:58:08

Fixed compile warning

033aa51d

2020-02-13T22:58:04

testfilesystem: Don't exit the application if SDL_GetBasePath isn't supported

8f1a916a

2020-02-13T20:50:47

Add basic support for compiling on RISC OS

80cf4f07

2020-02-08T19:34:51

test: Improved detection of OpenGL support

dd0ebfdf

2020-02-07T11:45:32

Use the triggers to test rumble for more fine grained vibration feedback

0a7fe18f

2020-01-17T11:06:02

On Mac OSX there are spurious hat events at program start, so skip these

a8780c6a

2020-01-16T20:49:25

acbf2593

2020-01-13T11:46:17

Emscripten: build fix for testoverlay2.c

46e1377d

2019-12-20T20:12:03

Automatically assign player indexes to game controllers, and allow changing the player index for game controllers and joysticks. Added the functions SDL_JoystickFromPlayerIndex(), SDL_JoystickSetPlayerIndex(), SDL_GameControllerFromPlayerIndex(), and SDL_GameControllerSetPlayerIndex()

8ce894a3

2019-12-05T13:18:56

Ignore axis jitter when mapping controllers

8aaf945b

2019-11-28T11:44:15

Fixed mapping controllers that have axes that start at -32768 and then snap to 0 at the first input report

b5aff9d7

2019-11-22T13:12:12

Added SDL_GameControllerTypeForIndex() and SDL_GameControllerGetType() to return the type of controller attached.

c8896e46

2019-11-21T10:09:26

Turned on controllermap debug output by default

20ddf45e

2019-11-02T22:58:52

Added SDL_PIXELFORMAT_BGR444

68985371

2019-09-24T16:36:48

offscreen: Add new video driver backend Offscreen The Offscreen video driver is intended to be used for headless rendering as well as allows for multiple GPUs to be used for headless rendering Currently only supports EGL (OpenGL / ES) or Framebuffers Adds a hint to specifiy which EGL device to use: SDL_HINT_EGL_DEVICE Adds testoffscreen.c which can be used to test the backend out Disabled by default for now

4e518f98

2019-09-23T17:48:14

CMake: add version strings to Apple Info.plist files This fills in the CFBundleVersion and CFBundleShortVersionString fields, if and when SDL's test-apps are built via CMake. This is needed to install the .app bundles on iOS 13+ (using 'xcrun simctl install booted path/to/testsuchandsuch.app')

32bb8b4b

2019-09-10T10:03:20

test: replace some exit()s with returns.

b13c951c

2019-08-27T11:07:43

CMake: iOS support added When using a recent version of CMake (3.14+), this should make it possible to: - build SDL for iOS, both static and dynamic - build SDL test apps (as iOS .app bundles) - generate a working SDL_config.h for iOS (using SDL_config.h.cmake as a basis) To use, set the following CMake variables when running CMake's configuration stage: - CMAKE_SYSTEM_NAME=iOS - CMAKE_OSX_SYSROOT=<SDK> (examples: iphoneos, iphonesimulator, iphoneos12.4, /full/path/to/iPhoneOS.sdk, etc.) - CMAKE_OSX_ARCHITECTURES=<semicolon-separated list of CPU architectures> (example: "arm64;armv7s") Examples: - for Simulator, using the latest, installed SDK: cmake path/to/SDL -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphonesimulator -DCMAKE_OSX_ARCHITECTURES=x86_64 - for Device, using the latest, installed SDK, 64-bit only cmake path/to/SDL -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphoneos -DCMAKE_OSX_ARCHITECTURES=arm64 - for Device, using the latest, installed SDK, mixed 32/64 bit cmake path/to/SDL -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphoneos -DCMAKE_OSX_ARCHITECTURES="arm64;armv7s" - for Device, using a specific SDK revision (iOS 12.4, in this example): cmake path/to/SDL -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphoneos12.4 -DCMAKE_OSX_ARCHITECTURES=arm64 - for Simulator, using the latest, installed SDK, and building SDL test apps (as .app bundles): cmake path/to/SDL -DSDL_TEST=1 -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphonesimulator -DCMAKE_OSX_ARCHITECTURES=x86_64

6f8910e3

2019-08-04T14:56:02

minor warning fixes.

edc15889

2019-08-03T12:49:50

remove test/aclocal.m4

4953e050

2019-07-31T05:11:40

use SDL_zeroa at more places where the argument is an array.

3fc447df

2019-07-03T02:37:15

Fixed bug 4708 - testdropfile: double-free Juha Niemim?ki SDLTest_CommonEvent seems to free the file name so testdropfile prints some garbage to console and crashes when freeing the name again.

f71454c0

2019-06-11T02:32:43

testoverlay2: Changed some C runtime calls to be SDL equivalents.

b5d3b6fc

2019-05-28T17:39:13

test: unify all the command line usage logging.

00e5eeb4

2019-05-19T01:45:15

test: added SDLTest_CommonDefaultArgs() This is for test apps that don't need custom command line arguments; it lets us reduce the boilerplate code a tiny bit.

18d83093

2019-05-18T23:47:57

test: configure/make shouldn't build GL/GLES1/GLES2 programs if unsupported.

1febfedf

2019-04-02T05:31:08

configure.in: Rename configure.ac to fix an 'aclocal' warning

edebdeb4

2019-03-17T12:45:19

testgesture: Make the background gray. This is so you can see it on systems that have a minimal window manager and a black background.

6727408d

2019-03-15T22:39:31

testgesture: cleaned up code formatting, etc.

7cc0a606

2019-03-15T22:17:21

testgesture: minor cleanups.

5897ed85

2019-03-15T22:16:02

test: Moved testgesture.c over to the common SDLtest framework.

5e13087b

2019-01-04T22:01:14

c3e3503e

2018-12-16T01:04:07

testgl2: Press 'o' or 'p' to decrease/increase OpenGL swap interval.

14e389ea

2018-11-20T10:55:00

minor update to Makefile.os2, added a test/Makefile.os2.

e0cc19f2

2018-09-20T15:41:57

testsprite2: report average FPS in blocks of five seconds. This makes the reporting more accurate, vs startup inefficiencies and other scheduling burps.

aae29c9e

2018-09-02T00:35:11

test: Makefile should copy .dat files for testoverlay2.

a794126d

2018-08-24T09:49:48

vulkan: SDL_Vulkan_GetInstanceExtensions should accept a NULL window. Fixes Bugzilla #4235.

kc3-lang/SDL/test

test

Log