src/audio/coreaudio


Log

Author Commit Date CI Message
Ryan C. Gordon 693755f0 2019-09-25T15:07:07 coreaudio: Apple doesn't support U16 data, so convert in that case.
Sam Lantinga 455944c8 2019-08-22T16:12:16 Fixed whitespace
Sam Lantinga b521df66 2019-08-22T16:09:42 [SDL][IOS] Audio fix - applies stream to sound data when resampling or reformatting is required.
Sam Lantinga abcfe804 2019-05-14T14:20:54 [SDL] iOS fix bug with audio interrupted by a phone call not restoring.
Ryan C. Gordon 2fbfe8b9 2019-03-25T12:59:30 coreaudio: Set audio callback thread priority. Fixes Bugzilla #4155.
Ryan C. Gordon 6a3356ab 2019-03-25T12:24:38 Backed out changeset cec31de4e126 This was meant to migrate CoreAudio onto the same SDL_RunAudio() path that most other audio drivers are on, but it introduced a bug because it doesn't deal with dropped audio buffers...and fixing that properly just introduces latency. I might revisit this later, perhaps by reworking SDL_RunAudio to allow for this sort of API better, or redesigning the whole subsystem or something, I don't know. I'm not super-thrilled that this has to exist outside of the usual codepaths, though. Fixes Bugzilla #4481.
Sam Lantinga 5e13087b 2019-01-04T22:01:14 Updated copyright for 2019
Sam Lantinga 8325df25 2018-05-24T07:30:24 Fixed bug 4169 - Crash due to audio session observer race condition Jona The following explains why this bug was happening: This crash was caused because the audio session was being set as active [session setActive:YES error:&err] when the audio device was actually being CLOSED. Certain cases the audio session being set to active would fail and the method would return right away. Because of the way the error was handled we never removed the SDLInterruptionListener thus leaking it. Later when an interruption was received the THIS_ object would contain a pointer to an already released device causing the crash. The fix: When only one device remained open and it was being closed we needed to set the audio session as NOT active and completely ignore the returned error to successfully release the SDLInterruptionListener. I think the user assumed that the open_playback_devices and open_capture_devices would equal 0 when all of them where closed but the truth is that at the end of the closing process that the open devices count is decremented.
Ryan C. Gordon dc8b55e5 2018-04-16T02:11:09 coreaudio: Use the standard SDL audio thread instead of spinning a new one. Fixes corner cases, like the audio callback not firing if the device is disconnected, etc.
Sam Lantinga e3cc5b2c 2018-01-03T10:03:25 Updated copyright for 2018
Ryan C. Gordon fa156741 2017-10-13T01:15:29 coreaudio: changed device close procedure to prevent long hangs in some cases. The audioqueue thread needs to keep running, and processing the CFRunLoop until the AudioQueue is disposed of, otherwise CoreAudio will hang waiting for final data to feed the device. At least, I think this is how it all works. It definitely fixes the bug here! Since AudioQueueDispose() calls AudioQueueStop() internally, there's no need for our thread to handle this, either, which is good because the AudioQueue would be disposed by this point. So now the AudioQueue is disposed first, and then our thread is joined, and everything works out okay. Just in case, we mark the device "paused" before setting everything in motion, so any further callbacks from CoreAudio will write silence and not fire the app's audio callback again. Fixes Bugzilla #3868.
Sam Lantinga fe6b8f1c 2017-09-22T11:25:52 Fixed Mac OS X build
Sam Lantinga 407e1693 2017-09-22T11:15:14 Fixed audio being silent on older iOS devices Tested on an iPod running iOS 6.1
Sam Lantinga c08a7a74 2017-09-15T17:27:32 Added a hint SDL_HINT_AUDIO_CATEGORY to control the audio category, determining whether the phone mute switch affects the audio
Sam Lantinga 0d011ec6 2017-08-28T00:22:23 Renaming of guard header names to quiet -Wreserved-id-macro
Ryan C. Gordon 6844d92c 2017-05-24T13:28:13 coreaudio: we don't need to track number of allocated audio buffers anymore. CoreAudio takes care of iterating through the buffers and freeing them now, so we don't have to manage this ourselves.
Ryan C. Gordon fc4402e5 2017-05-24T13:25:31 coreaudio: Better handling of audio buffer queue management. We don't fill buffers just to throw them away during shutdown now, we let the AudioQueue free its own buffers during disposal (which fixes possible warnings getting printed to stderr by CoreAudio), and we stop the queue after running any queued audio during shutdown, which prevents dropping the end of the audio playback if you opened the device with an enormous sample buffer. Fixes Bugzilla #3555.
Ryan C. Gordon 3fd35f6b 2017-05-24T01:28:03 coreaudio: looks like we need more like a 10ms buffer minimum, not 50ms.
Ryan C. Gordon 793c788b 2017-05-24T00:12:22 coreaudio: dynamically allocate AudioQueueBuffers. We need more than two buffers to flip between if they are small, or CoreAudio won't make any sound; apparently it needs X milliseconds of audio queued when it needs to play more or it drops any queued buffers. We are currently guessing 50 milliseconds as a minimum, but there's probably a more proper way to get the minimum time period from the system. Fixes Bugzilla #3656.
Ryan C. Gordon c878b59b 2017-05-10T16:18:43 audio: fixed more "spec" references that should have been "callbackspec". This should catch all the ones for audio targets that have provided their own audio threads.
Alex Szpakowski 75fb07a6 2017-05-03T18:05:29 iOS: Only mark interrupted audio devices as non-interrupted if AudioQueueStart is successful.
Sam Lantinga 71a4e8ed 2017-02-23T12:10:02 Stop CoreAudio from doing expensive audio rate conversion
Sam Lantinga 45b774e3 2017-01-01T18:33:28 Updated copyright for 2017
Philipp Wiesemann 8e88f081 2016-09-21T23:06:49 Mac: Fixed whitespace around function return type.
Alex Szpakowski f0fca288 2016-09-18T19:22:09 Handle audio interruptions on iOS/tvOS. Fixes bugs 2569 and 2960.
Alex Szpakowski 4209a1fd 2016-09-15T19:59:57 CoreAudio iOS/tvOS: Use AVFoundation instead of AudioSession. Fixes audio on tvOS. Note that linking with AVFoundation is now required if you don't disable SDL_audio compilation on iOS and tvOS.
Alex Szpakowski f0505766 2016-09-13T22:18:06 Initial Apple TV / tvOS support. The Apple TV remote is currently exposed as a joystick with its touch surface treated as two axes. Key presses are also generated when its buttons and touch surface are used. A new hint has been added to help deal with deciding whether to background the app when the remote's menu button is pressed: SDL_HINT_APPLE_TV_CONTROLLER_UI_EVENTS.
Ryan C. Gordon 0265d3af 2016-09-04T01:23:55 coreaudio: Move from AudioUnits to AudioQueues. AudioQueues are available in Mac OS X 10.5 and later (and iOS 2.0 and later). Their API is much more clear (and if you don't mind the threading tapdance to get its own CFRunLoop) much easier to use in general for our purposes. As an added benefit: they seemlessly deal with format conversion in ways AudioUnits don't: for example, my MacBook Pro's built-in microphone won't capture at 8000Hz and the AudioUnit version wouldn't resample to hide this fact; the AudioQueue version, however, can handle this.
Ryan C. Gordon 3b53304a 2016-09-03T00:13:41 coreaudio: capture devices should let the system allocate the render buffer.
Ryan C. Gordon fda7a3d1 2016-09-02T13:12:21 coreaudio: Replaced an int with an SDL_bool.
Ryan C. Gordon f9d9708f 2016-09-02T13:11:28 coreaudio: Move some variable declarations to the top of the scope.
Ryan C. Gordon 5de11a5f 2016-08-09T16:58:06 Added a FIXME.
Ryan C. Gordon 9b2a59ef 2016-08-05T02:04:48 audio: Changed OnlyHasDefaultInputDevice to OnlyHasDefaultCaptureDevice.
Ryan C. Gordon 9b647727 2016-08-05T01:44:41 audio: Clean up some CloseDevice() interface details. - It's now always called if device->hidden isn't NULL, even if OpenDevice() failed halfway through. This lets implementation code not have to clean up itself on every possible failure point; just return an error and SDL will handle it for you. - Implementations can assume this->hidden != NULL and not check for it. - implementations don't have to set this->hidden = NULL when done, because the caller is always about to free(this). - Don't reset other fields that are in a block of memory about to be free()'d. - Implementations all now free things like internal mix buffers last, after closing devices and such, to guarantee they definitely aren't in use anymore at the point of deallocation.
Ryan C. Gordon a9ef240c 2016-08-03T00:30:12 coreaudio: Implemented audio capture for iOS.
Ryan C. Gordon 6d5c9c1e 2016-08-02T13:48:52 audio: Made some SDL_AudioDevice fields atomic. This makes sure they're properly communicated to the audio threads.
Ryan C. Gordon 015dd8dd 2016-08-01T00:20:47 audio: Implemented capture support for Mac OS X CoreAudio. I don't know what iOS wants yet, so this code might work there, too...?
Alex Szpakowski 4a468739 2016-05-21T00:20:52 Removed Mac OS 10.5 support (bug #3137). Also fixed a warning about deprecated Carbon code when using SDL_audio (bug #3127, thanks Dominik!)
Sam Lantinga 42065e78 2016-01-02T10:10:34 Updated copyright to 2016
Philipp Wiesemann 0e45984f 2015-06-21T17:33:46 Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
Sam Lantinga 2c4a6ea0 2015-05-26T06:27:46 Updated the copyright year to 2015
Ryan C. Gordon b72938c8 2015-04-20T12:22:44 Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.
Alex Szpakowski fe6c797c 2015-04-10T23:30:31 Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.
Ryan C. Gordon 11cffe1d 2015-03-19T15:43:00 SDL_RemoveAudioDevice() should specify capture vs output. This lets us reuse values between the two categories without conflicting, etc.
Ryan C. Gordon f9cfd9fa 2015-03-18T02:01:17 Bunch of reworking to how we manage audio devices. Device enumeration now happens at startup and then is managed exclusively through hotplugging instead of full redetection. The device name list now has a unique "handle" associated with each item and SDL will pass this to the backend so they don't have to figure out how a human readable name maps to real hardware for a second time. Other cleanups, fixes, improvements, plus all the audio backends updated to the new interface...largely untested at this point, though.
Ryan C. Gordon 0e02ce08 2015-03-16T02:11:39 Initial work on audio device hotplug support. This fills in the core pieces and fully implements it for Mac OS X. Most other platforms, at the moment, will report a disconnected device if it fails to write audio, but don't notice if the system's device list changed at all.
Edward Rudd b88ca1b4 2015-02-10T16:28:56 the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802
Philipp Wiesemann 60329e6a 2015-02-03T21:22:25 Added missing guards.
Philipp Wiesemann b48e54aa 2015-01-26T22:00:29 Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.
David Ludwig 70438be2 2014-12-03T10:55:23 WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!
Philipp Wiesemann 9c398852 2014-11-22T22:20:40 Corrected header file documentation comment.
Pierre-Loup A. Griffais 24c86b55 2014-09-11T19:24:42 [X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam
David Ludwig 3dcb451f 2014-04-09T21:29:19 Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.
Ryan C. Gordon a43dbfad 2014-03-20T16:56:37 Static analysis fix: Removed unused variable. (We don't care if closing the device fails anyhow).
Sam Lantinga 58edac3e 2014-02-02T00:53:27 Fixed bug 2374 - Update copyright for 2014... Is it that time already??
Gabriel Jacobo f848adff 2013-11-29T10:06:08 Improve Android pause/resume behavior.
Ryan C. Gordon 7e1289af 2013-11-24T23:56:17 Make internal SDL sources include SDL_internal.h instead of SDL_config.h The new header will include SDL_config.h, but allows for other global stuff.
Gabriel Jacobo dad42067 2013-08-12T11:13:50 Fixes #2022, do not resume on Android when surfaceChanged If the app is in landscape mode and the user presses the power button, a pause is followed immediately by a surfaceChanged event because the lock screen is shown in portrait mode. This triggers a "false" resume. So, we just pause and resume following the onWindowFocusChanged events. Also, wait for SDL_APP_WILLENTERBACKGROUND and SDL_APP_DIDENTERBACKGROUND before blocking the event pump.
Sam Lantinga 1ad936eb 2013-08-11T19:56:43 Fixed bug 2027 - Full-screen appears to be broken - hang in SDL_DestroyWindow() Rainer Deyke I'm running Linux Mint 15 with the Cinnamon window manager. SDL_DestroyWindow consistently locks up for me when the window if fullscreen.