|
f02ad282
|
2021-09-25T11:31:18
|
|
Remove FillRects from back-end, where RenderGeometry can be used
|
|
|
1fe7e361
|
2021-09-20T16:46:16
|
|
OpenGL: a few opengl functions become unused
|
|
|
d1925154
|
2021-09-20T16:33:49
|
|
OpenGL: remove RenderCopy and RenderCopyEx from back-end
|
|
b360965d
|
2021-10-21T20:48:05
|
|
Added a hint for alternate OpenGL NV12 data format
|
|
|
a34fe816
|
2021-10-21T12:28:35
|
|
Added the ability to bind NV12 textures in the OpenGL renderer
|
|
|
eb3bf80f
|
2021-09-21T18:15:09
|
|
Fixed compiler warnings using Visual Studio 2019
|
|
ca9a3217
|
2021-09-19T15:47:24
|
|
render: GL/GLES now draw lines almost perfectly matching software renderer.
One place known to differ in a significant way is a single line segment that
starts and ends on the same point; the GL renderers will light up a single
pixel here, whereas the software renderer will not. My current belief is this
is a bug in the software renderer, based on the wording of the docs:
"SDL_RenderDrawLine() draws the line to include both end points."
You can see an example program that triggers that difference in Bug #2006.
As it stands, the GL renderers might _also_ render diagonal lines differently,
as the the Bresenham step might vary between implementations (one does three
pixels and then two, the other does two and then three, etc). But this patch
causes those lines to start and end on the correct pixel, and that's the best
we can do, and all anyone really needs here.
Not closing any bugs with this patch (yet!), but here are several that it
appears to fix. If no other corner cases pop up, we'll call this done.
Reference Bug #2006.
Reference Bug #1626.
Reference Bug #4001.
...and probably others...
|
|
|
5faea84c
|
2021-09-18T11:54:25
|
|
render: Mark viewport/cliprect dirty when window is resized.
Fixes #4751.
|
|
4549769d
|
2021-03-07T15:20:45
|
|
Add `SDL_RenderSetVSync()`
Currently, if an application wants to toggle VSync, they'd have to tear
down the renderer and recreate it. This patch fixes that by letting
applications call SDL_RenderSetVSync().
This is the same as the patch in #3673, except it applies to all
renderers (including PSP, even thought it seems that the VSync flag is
disabled for that renderer). Furthermore, the renderer flags also change
as well, which #3673 didn't do. It is also an API instead of using hint
callbacks (which could be potentially dangerous).
Closes #3673.
|
|
|
183eb067
|
2021-09-01T15:46:32
|
|
Fixed bug #4711: prevent opengl SDL_renderer from crashing if GL_ARB_multitexture isn't supported
|
|
|
54ca1d19
|
2021-08-27T07:44:03
|
|
SW_RenderGeometry: add a redundant check to clear static analysis (see bug #4600)
|
|
|
a8f89a01
|
2021-04-23T12:00:14
|
|
Change 'size_indice' to 'size_indices'
|
|
|
47db47c1
|
2021-04-06T21:32:02
|
|
Add SDL_HAVE_RENDER_GEOMETRY to compile or not with RenderGeometry support
|
|
|
cd0663e0
|
2021-04-01T11:47:45
|
|
Fix declaration-after-statement and remove tabs
|
|
|
e4812611
|
2021-04-01T09:49:16
|
|
Move to SDL_RenderGeometryRaw prototype with separate xy/uv/color pointer parameters
|
|
|
f73c1eff
|
2021-03-17T09:58:49
|
|
Use normalized texture coordinates
|
|
|
37f78fc1
|
2021-03-16T15:13:15
|
|
Add OpenGL implementation
|
|
|
b99543b6
|
2021-01-11T20:40:11
|
|
opengl: More work on making line drawing match software renderer.
|
|
|
c0df40e0
|
2021-01-05T17:39:48
|
|
Add more SDL_HAVE_YUV defines
|
|
|
be4cfd51
|
2021-01-05T11:56:22
|
|
Add SDL_UpdateNVTexture() to update NV12/21 Texture (bug #5430)
for renderer software, opengl, and opengles2
|
|
|
9130f7c3
|
2021-01-02T10:25:38
|
|
Updated copyright for 2021
|
|
|
cb361896
|
2020-12-09T07:16:22
|
|
Fixed bug 5235 - All internal sources should include SDL_assert.h
Ryan C. Gordon
We should really stick this in SDL_internal.h or something so it's always available.
|
|
|
754286c6
|
2020-12-02T13:45:24
|
|
SDL Renderer: specify the correct flag when recreating the window
|
|
|
0e4ce848
|
2020-11-08T20:57:17
|
|
opengl: Make diagonal lines match the software renderer.
OpenGL leaves the final line segment open, SDL's software renderer does not,
so we need a tiny bit of trigonometry here to move one more pixel in the right
direction.
|
|
|
93a2c58c
|
2020-11-08T12:37:09
|
|
opengl: Use GL_LINE_STRIP instead of breaking down into seperate GL_LINES.
Surely GL drivers have improved in the last seven years. I hope...?
|
|
|
c33f8083
|
2020-10-20T11:12:49
|
|
render: Restoring line rendering fixes that were previously put on hold.
(Backed out hg changeset 7a4240daba46)
|
|
|
b6afbe63
|
2020-04-07T09:38:57
|
|
Added SDL_log.h to SDL_internal.h so logging is available everywhere
|
|
|
19a5f4ab
|
2020-03-22T14:32:47
|
|
opengl: Don't enable/disable texturing except when actually rendering.
Otherwise our cached state goes out of sync when updating a texture. Since
these state changes aren't necessary, they were removed instead of updating
the cached state.
Fixes Bugzilla #4998.
|
|
|
93b26f17
|
2020-02-17T16:15:04
|
|
opengl: Backed out hg changeset 94f9f40a957f
This is the OpenGL line drawing fix for Bugzilla #3182, but there's some
disagreement about what the renderers should do here, so I'm backing this out
until after 2.0.12 ships, and then we'll reevaluate all the renderer backends
to decide what's correct, and make them all work the same.
|
|
|
ed10d947
|
2020-02-10T12:53:54
|
|
opengl: Build out full GL_LINES and respect the diamond-exit rule.
Likewise for the GLES1 and GLES2 renderers.
This solves the missing pixel at the end of a line and removes all the
heuristics for various platforms/drivers. It's possible we could still use
GL_LINE_STRIP with this and save some vertex buffer space, assuming this
doesn't upset some driver somewhere, but this seems to be a clean fix that
makes the GL renderers match the software renderer output.
Diamond-exit rule explanation:
http://graphics-software-engineer.blogspot.com/2012/04/rasterization-rules.html
Fixes Bugzilla #3182.
|
|
|
a8780c6a
|
2020-01-16T20:49:25
|
|
Updated copyright date for 2020
|
|
|
5e19e66c
|
2019-12-22T13:39:44
|
|
Fixed bug 4914 - Expose SDL_ScaleMode and add SDL_SetTextureScaleMode/SDL_GetTextureScaleMode
Konrad
This was something rather trivial to add, but asked at least several times before (I did google about it as well).
It should be possible to dynamically change scaling mode of the texture. It is actually trivial task, but until now it was only possible with a hint before creating a texture.
I needed it for my game as well, so I took the liberty of writing it myself.
This patch adds following functions:
SDL_SetTextureScaleMode(SDL_Texture * texture, SDL_ScaleMode scaleMode);
SDL_GetTextureScaleMode(SDL_Texture * texture, SDL_ScaleMode *scaleMode);
That way you can change texture scaling on the fly.
|
|
|
60d3965e
|
2019-10-30T15:36:17
|
|
Readability: remove redundant return, continue, enum declaration
|
|
|
72660a51
|
2019-10-13T20:52:52
|
|
Fixed bug 4825 - SDL Renderer OpenGL: Buffer overflow (SDL_RENDERCMD_DRAW_LINES)
|
|
0c263738
|
2019-08-26T18:49:04
|
|
gl/gles/gles2 render: fix SDL_RenderClear being affected by the clip rect in some situations.
|
|
|
7162649f
|
2019-06-18T18:58:39
|
|
opengl: Be more robust in failing cases.
Load all possible symbols, not just until one fails, in case they get used
during shutdown, etc.
Fixes Bugzilla #4093.
|
|
|
2ee9b1dd
|
2019-05-19T11:01:36
|
|
Fixed bug 4025 - SDL_Renderer OpenGL : add support for textures ABGR, RGB, BGR
Sylvain
OpenGLES2 SDL renderer has support for textures ARGB, ABGR, RGB and BGR, whereas OpenGL SDL renderer only had ARGB.
If you think it's worth adding it, here's a patch. I quickly tried and it worked, but there may be missing things or corner case.
|
|
|
b2e76d86
|
2019-03-19T16:52:09
|
|
Fixed Windows RT build
|
|
|
b28e956b
|
2019-03-12T07:59:53
|
|
Fixed bug 4542 - Image flipped vertically when rendering on texture
Have to recompute viewport because projection/glOrtho is different
wether rendering is on target texture or not
|
|
|
40a52cee
|
2019-02-04T18:55:39
|
|
render: Fix OpenGL draw state cache for various points of texture binding.
|
|
|
5e13087b
|
2019-01-04T22:01:14
|
|
Updated copyright for 2019
|
|
|
dc344360
|
2018-12-21T20:53:31
|
|
render: Fix internal state getting out of sync when destroying a texture that was just rendered and then creating a new one, in the GL and GLES2 backends. Fixes bug #4433.
|
|
|
9719f89d
|
2018-11-17T12:12:29
|
|
Back out change initializing renderer blend mode incorrectly.
|
|
|
29e15ce6
|
2018-11-17T00:58:45
|
|
The default draw blendmode is SDL_BLENDMODE_NONE
|
|
329f2eb9
|
2018-10-31T20:17:53
|
|
Fix crash when GL_LoadFunctions()/GLES2_LoadFunctions() fails
https://bugzilla.libsdl.org/show_bug.cgi?id=4350
We can't safely call GL_DestroyRenderer() until GL_LoadFunctions()
succeeds because we will be missing functions that we try to use
when activating the renderer for destruction if we have an GL context.
|
|
|
62494a2e
|
2018-10-31T15:03:41
|
|
Merge SDL-ryan-batching-renderer branch to default.
|
|
91820998
|
2018-10-28T21:36:48
|
|
Add and update include guards
Include guards in most changed files were missing, I added them keeping
the same style as other SDL files. In some cases I moved the include
guards around to be the first thing the header has to take advantage of
any possible improvements compiler may have for inclusion guards.
|
|
|
b262b0eb
|
2018-10-22T20:50:32
|
|
Small stack allocations fall back to malloc if they're unexpectedly large.
|
|
|
0c2e10dc
|
2018-10-01T22:53:45
|
|
render: Make the GL backends cache and defer more state changes.
|
|
|
d04e5524
|
2018-09-25T19:20:31
|
|
render: OpenGL renderer now caches some state, to improve non-batching mode.
(other minor bug fixes in here, too)
|
|
|
c01da217
|
2018-09-24T12:30:47
|
|
render: get rid of the predeclared functions in the GL and Metal renderers.
(others to come as I continue to update render backends!)
|
|
|
051d1cfc
|
2018-09-24T02:08:34
|
|
render: Make opengl backend take advantage of new high-level features.
|
|
|
2241b33f
|
2018-09-23T23:22:56
|
|
render: Update Metal and GL backends to use new high-level features, etc.
Now nothing is uploaded as dynamic data with Metal's setVertexBytes, etc; it's
all in the one big vertex buffer, now.
|
|
|
55cb9966
|
2018-09-20T16:36:54
|
|
render: first shot at reworking opengl backend for new batching system.
|
|
|
eb14b635
|
2018-05-07T19:52:25
|
|
Fixed bug 4134 - Render targets lose scale quality after minimizing a fullscreen window
Olli-Samuli Lehmus
If one creates a window with the SDL_WINDOW_FULLSCREEN_DESKTOP flag, and creates a render target with SDL_SetHint(SDL_HINT_RENDER_SCALE_QUALITY, "linear"), and afterwards sets SDL_SetHint(SDL_HINT_RENDER_SCALE_QUALITY, "nearest"), after minimizing the window, the scale quality hint is lost on the render target. Textures however do keep their interpolation modes.
|
|
40b27fd5
|
2018-02-12T17:00:00
|
|
revert the recent typecast assignment changes (see bug #4079)
also change the void* typedefs for the two vulkan function
pointers added in vulkan_internal.h into generic function
pointer typedefs.
|
|
|
90e72bf4
|
2018-01-30T18:08:34
|
|
Fixed ISO C99 compatibility
SDL now builds with gcc 7.2 with the following command line options:
-Wall -pedantic-errors -Wno-deprecated-declarations -Wno-overlength-strings --std=c99
|
|
|
e3cc5b2c
|
2018-01-03T10:03:25
|
|
Updated copyright for 2018
|
|
|
a6a4e27a
|
2017-11-12T22:51:12
|
|
Updated SDL's YUV support, many thanks to Adrien Descamps
New functions get and set the YUV colorspace conversion mode:
SDL_SetYUVConversionMode()
SDL_GetYUVConversionMode()
SDL_GetYUVConversionModeForResolution()
SDL_ConvertPixels() converts between all supported RGB and YUV formats, with SSE acceleration for converting from planar YUV formats (YV12, NV12, etc) to common RGB/RGBA formats.
Added a new test program, testyuv, to verify correctness and speed of YUV conversion functionality.
|
|
|
e9652b19
|
2017-10-06T16:50:24
|
|
Fixed bug 3857 - SDL_ConvertPixels misses YUV conversions
Sylvain
Few issues with YUV on SDL2 when using odd dimensions, and missing conversions from/back to YUV formats.
1) The big part is that SDL_ConvertPixels() does not convert to/from YUV in most cases. This now works with any format and also with odd dimensions,
by adding two internal functions SDL_ConvertPixels_YUV_to_ARGB8888 and SDL_ConvertPixels_ARGB8888_to_YUV (could it be XRGB888 ?).
The target format is hard coded to ARGB888 (which is the default in the internal of the software renderer).
In case of different YUV conversion, it will do an intermediate conversion to a ARGB8888 buffer.
SDL_ConvertPixels_YUV_to_ARGB8888 is somehow redundant with all the "Color*Dither*Mod*".
But it allows some completeness of SDL_ConvertPixels to handle all YUV format.
It also works with odd dimensions.
Moreover, I did some benchmark(SDL_ConvertPixel vs Color32DitherYV12Mod1X and Color32DitherYUY2Mod1X).
gcc-6.3 and clang-4.0. gcc performs better than clang. And, with gcc, SDL_ConvertPixels() performs better (20%) than the two C function Color32Dither*().
For instance, to convert 10 times a 3888x2592 image, it takes ~195 ms with SDL_ConvertPixels and ~235 ms with Color32Dither*().
Especially because of gcc vectorize feature that optimises all conversion loops (-ftree-loop-vectorize).
Nb: I put no image pitch for the YUV buffers. because it complexify a little bit the code and the API :
There would be some ambiguity when setting the pitch exactly to image width:
would it a be pitch of image width (for luma and chroma). or just contiguous data ? (could set pitch=0 for the later).
2) Small issues with odd dimensions:
If width "w" is odd, luma plane width is still "w" whereas chroma planes will be "(w + 1)/2". Almost the same for odd h.
Solution is to strategically substitute "w" by "(w+1)/2" at the good places ...
- In the repository, SDL_ConvertPixels() handles YUV only if yuv source format is exactly the same as YUV destination format.
It basically does a memcpy of pixels, but it's done incorrectly when width or height is odd (wrong size of chroma planes). This is fixed.
- SDL Renderers don't support odd width/height for YUV textures.
This is fixed for software, opengl, opengles2. (opengles 1 does not support it and fallback to software rendering).
This is *not* fixed for D3D and D3D11 ... (and others, psp ?)
Only *two* Dither function are fixed ... not sure if others are really used.
- This is not possible to create a NV12/NV12 texture with the software renderer, whereas other renderers allow it.
This is fixed, by using SDL_ConvertPixels underneath.
- It was not possible to SDL_UpdateTexture() of format NV12/NV21 with the software renderer. this is fixed.
Here's also two testcases:
- that do all combination of conversion.
- to test partial UpdateTexture
|
|
c68d3ab7
|
2017-08-17T21:35:46
|
|
Watcom supports __FUNCTION__ identifier (and surely not __PRETTY_FUNCTION__)
Partially fixes Bugzilla #3758.
|
|
|
9451cd81
|
2017-08-14T20:07:30
|
|
Fixed compiler warnings
|
|
|
c59d9923
|
2017-08-14T05:51:44
|
|
Implemented more flexible blending modes for accelerated renderers
This fixes bug 2594 - Propose new blend mode, SDL_BLENDMODE_BLEND_DSTA
blendMode = SDL_ComposeCustomBlendMode(SDL_BLENDFACTOR_SRC_ALPHA,
SDL_BLENDFACTOR_ONE_MINUS_SRC_ALPHA,
SDL_BLENDOPERATION_ADD,
SDL_BLENDFACTOR_ZERO,
SDL_BLENDFACTOR_ONE,
SDL_BLENDOPERATION_ADD);
This fixes bug 2828 - Subtractive Blending
blendMode = SDL_ComposeCustomBlendMode(SDL_BLENDFACTOR_SRC_ALPHA,
SDL_BLENDFACTOR_ONE,
SDL_BLENDOPERATION_SUBTRACT,
SDL_BLENDFACTOR_ZERO,
SDL_BLENDFACTOR_ONE,
SDL_BLENDOPERATION_SUBTRACT);
This goes partway to fixing bug 3684 - Add support for a pre-multiplied alpha blending mode
blendMode = SDL_ComposeCustomBlendMode(SDL_BLENDFACTOR_ONE,
SDL_BLENDFACTOR_ONE_MINUS_SRC_ALPHA,
SDL_BLENDOPERATION_ADD,
SDL_BLENDFACTOR_ONE,
SDL_BLENDFACTOR_ONE_MINUS_SRC_ALPHA,
SDL_BLENDOPERATION_ADD);
|
|
|
6f843b90
|
2017-08-12T12:59:22
|
|
Fixed bug 3243 - SDL_SetRenderDrawColor() behaves wrong with RGBA=0
Simon Hug
The bug is in the GL_ResetState and GLES_ResetState functions which get called after a new GL context is created. These functions set the cached current color to transparent black, but the GL specification says the initial color is opaque white.
The attached patch changes the values to 0xffffffff to reflect the initial state of the current color. Should the ResetState functions get called anywhere else in the future, this probably has to call the GL functions itself to ensure that the colors match.
|
|
|
02773811
|
2017-05-18T21:00:11
|
|
render: GL_DestroyRender() should activate first.
Otherwise, we might destroy a different GL context's resources.
|
|
266816b4
|
2017-03-26T21:00:19
|
|
Removed newlines from error messages.
|
|
|
13433c4a
|
2017-01-27T21:23:27
|
|
Fixed bug 3569 - GL_UpdateViewport leaves PROJECTION matrix selected
Tom Seddon
GL_ActivateRenderer may call GL_UpdateViewport, which leaves the GL_PROJECTION matrix selected. But after GL_ResetState, the GL_MODELVIEW matrix is selected, suggesting that's the intended default state.
It seems at least like these should be consistent. Presumably GL_UpdateViewport should be doing a glMatrixMode(GL_MODELVIEW) before it finishes.
|
|
|
45b774e3
|
2017-01-01T18:33:28
|
|
Updated copyright for 2017
|
|
|
fb5fd67c
|
2016-11-24T21:41:09
|
|
Fixed all known static analysis bugs, with checker-279 on macOS.
|
|
|
e93e91f0
|
2016-11-23T21:52:48
|
|
Pacify some GCC strict-aliasing compiler warnings.
|
|
|
97aa5775
|
2016-11-16T22:08:51
|
|
Fixed empty parameter list in signatures of internal functions.
|
|
|
57d01d7d
|
2016-11-13T22:57:41
|
|
Patch from Sylvain to fix clang warnings
|
|
|
662f966c
|
2016-10-13T08:46:34
|
|
Fixed bug 3355 - false "Invalid renderer" after creating an "opengles2" renderer.
Call SDL_GL_GetDrawableSize() directly because we may be in the initialization path and SDL_GetRendererOutputSize() will fail because the renderer magic isn't set up yet.
|
|
|
e4af8ce9
|
2016-10-13T04:57:31
|
|
Fixed typo getting the drawable size
|
|
564c790f
|
2016-10-11T17:31:29
|
|
Fixed a memory leak in function GL_RenderReadPixels
|
|
|
27d4f099
|
2016-10-07T23:40:44
|
|
Implemented SDL_GetHintBoolean() to make it easier to check boolean hints
|
|
|
67bf5cac
|
2016-10-02T22:32:35
|
|
Fixed wrong pixel format if reading pixels from OpenGL renderer.
|
|
|
fa0f4176
|
2016-10-01T14:48:18
|
|
Fixed build warnings and errors
|
|
|
77305d47
|
2016-10-01T11:46:32
|
|
Fixed bug 3345 - SDL_RenderClear inconsistency with ClipRect
Simon Hug
The description of the SDL_RenderClear function in the SDL_render.h header says the following:
"This function clears the entire rendering target, ignoring the viewport."
The word "entire" implies that the clipping rectangle set with SDL_RenderSetClipRect also gets ignored. This is left somewhat ambiguous if only the viewport is mentioned. Minor thing, but let's see what the implementations actually do.
The software renderer ignores the clipping rectangle when clearing. It even has a comment on this: /* By definition the clear ignores the clip rect */
Most other render drivers (opengl, opengles, opengles2, direct3d, and psp [I assume. Can't test it.]) use the scissor test for the ClipRect and don't disable it when clearing. Clearing will only happen within the clipping rectangle for these drivers.
An exception is direct3d11 which uses a clear function that ignores the scissor test.
|
|
|
061cc5e7
|
2016-10-01T11:38:53
|
|
Fixed bug 3349 - GLES2_RenderReadPixels doesn't use target texture format
Simon Hug
The OpenGL ES 2 renderer does not check the target texture format when using SDL_RenderReadPixels and just always uses ABGR8888. This can result in swapped or wrong colors.
The attached patch adds a check and selects the target texture format, if a texture is set as the target.
|
|
|
51d6371e
|
2016-10-01T11:34:04
|
|
Fixed bug 3350 - GL renderers don't need to flip rows after reading back pixels from the target texture
Simon Hug
All OpenGL renderers always flip the rows of the pixels that come from glReadPixels. This is unnecessary for target textures since these are already top down.
Also, the rect->y value can be used directly for target textures for the same reason. I don't see any code that would handle the logical render size for target textures. Or am I missing something?
The attached patch makes the renderers only the flip rows if the data comes from the default framebuffer.
|
|
|
a42c396a
|
2016-10-01T11:04:45
|
|
Fixed bug 3361 - Texture color modulation doesn't work with active NONE blend mode (opengl and opengles)
Simon Hug
The GL_SetBlendMode and GLES_SetBlendMode functions of the opengl and opengles renderers call the glTexEnvf to set the texture env mode to either GL_MODULATE (the default) or GL_REPLACE for the NONE blend mode. Using GL_REPLACE disables color and alpha modulation for textures.
These glTexEnv calls were put in the SetBlendMode function back in 2006 [1], but there the NONE code still used the GL_DECAL mode. The GL_REPLACE mode came in 2008 [2]. I'm a bit confused why that wasn't always GL_MODULATE and a bit surprised nobody reported that yet (unless I missed it). I guess only a few use the gles renderer and the newish shaders mask the issue.
|
|
|
3f1b1629
|
2016-10-01T10:52:24
|
|
Fixed bug 3362 - OpenGL renderer doesn't check if framebuffers are supported when creating target textures
Simon Hug
The GL_CreateTexture function doesn't have any checks for the case where the driver doesn't support the framebuffer object extension. It will call into GL_GetFBO which will call the non-existent glGenFramebuffersEXT.
Also, for some reason GL_CreateContext always sets the SDL_RENDERER_TARGETTEXTURE info flag, even if it is not supported. Changeset cc226dce7536 [1] makes this change, but doesn't explain why. It seems to me like the code would already have taken care of this [2].
The attached patch adds some checks and stops SDL from reporting render target support if there is none. The application can then properly inform the user instead of just crashing.
|
|
|
42065e78
|
2016-01-02T10:10:34
|
|
Updated copyright to 2016
|
|
|
f893ce3d
|
2015-12-28T15:15:58
|
|
OpenGL+GLES renderers: Fixed incorrect clip rectangle coords (thanks, Marcel!).
Fixes Bugzilla #2700.
|
|
|
0c463d77
|
2015-12-10T20:25:34
|
|
SDL_GL_GetAttribute: If a GL context isn't active, only return failure when the specified attribute needs an active GL context to be queried.
|
|
|
0e45984f
|
2015-06-21T17:33:46
|
|
Fixed crash if initialization of EGL failed but was tried again later.
The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly
uninitialized data structure if loading the library first failed. A later try to
use EGL then skipped initialization and assumed it was previously successful
because the data structure now already existed. This led to at least one crash
in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was
dereferenced to make a call to eglBindAPI().
|
|
|
da190975
|
2015-05-28T18:57:10
|
|
Fixed clip rectangle calculation when there is a viewport offset
|
|
|
2c4a6ea0
|
2015-05-26T06:27:46
|
|
Updated the copyright year to 2015
|
|
|
b72938c8
|
2015-04-20T12:22:44
|
|
Windows: Always set the system timer resolution to 1ms by default.
An existing hint lets apps that don't need the timer resolution changed avoid
this, to save battery, etc, but this fixes several problems in timing, audio
callbacks not firing fast enough, etc.
Fixes Bugzilla #2944.
|
|
|
fe6c797c
|
2015-04-10T23:30:31
|
|
Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.
|
|
b88ca1b4
|
2015-02-10T16:28:56
|
|
the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here.
Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture.
More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802
|
|
|
e3f9bf33
|
2015-02-08T22:50:16
|
|
Fixed two inconsistencies on failed allocation.
|
|
|
fe586d07
|
2015-02-08T21:25:37
|
|
Fixed three memory leaks on failed allocation.
|
|
|
b48e54aa
|
2015-01-26T22:00:29
|
|
Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation
Jonas Kulla
The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c.
I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.
|
|
70438be2
|
2014-12-03T10:55:23
|
|
WinRT: fixed bug whereby SDL would override an app's default orientation
WinRT apps can set a default, preferred orientation via a .appxmanifest file.
SDL was overriding this on app startup, and making the app use all possible
orientations (landscape and portrait).
Thanks to Eric Wing for the heads up on this!
|
|
|
9c398852
|
2014-11-22T22:20:40
|
|
Corrected header file documentation comment.
|
|
24c86b55
|
2014-09-11T19:24:42
|
|
[X11] Reconcile logical keyboard state with physical state on FocusIn
since the window system doesn't do it for us like other platforms.
This prevents sticky keys and missed keys when going in and out
of focus, for example Alt would appear to stick if switching away
from an SDL app with Alt-Tab and had to be pressed again.
CR: Sam
|
|
|
05cff792
|
2014-08-24T00:02:12
|
|
Fixed bug 2699 - possible memory leak in GL_RenderReadPixels
Benoit Pierre
If glReadPixels returns an error, than the temporary buffer is not deallocated
|
|
|
877666e2
|
2014-08-18T11:28:16
|
|
Fixed UV texture coordinate scale when using GL_ARB_texture_non_power_of_two
|