kmx git

Commit	Date	Message
63b3b9a5	2022-06-13T16:02:40	Fix some typos in diagnostic messages Detected by Debian's packaging QA tool, Lintian. Signed-off-by: Simon McVittie <smcv@collabora.com>
b75cd2b3	2022-06-10T14:12:03	x11: Force window back to expected size after SDL_SetWindowBordered. This helps if the window manager decided to let it fill the space that an existing border was using before its removal. Fixes #5718.
ec0204d2	2022-06-06T14:38:26	x11: Don't use GetXftDPI() when XRandR can tell us the DPI per-output. Fixes #5764.
a236bf4f	2022-06-06T02:13:37	x11: Hook up display hotplug notifications. Obviously this needs XRandR support. Fixes #4977.
412ceb84	2022-05-24T16:27:54	video: Only check major version in SDL_GetWindowWMInfo Since #5602, SDL is intended to have the same ABI across the whole major-version 2 cycle, so we should not check that the minor version matches the one that was used to compile an application. There are two checks that could make sense here. The first check is that the major version matches the expected major version. This is usually unnecessary and is not usually done (if we're calling into the wrong library we'll likely crash anyway), but since we have the information, we might as well continue to use it. The second check is whether the version provided by the caller is equal to or greater than a threshold version at which additional fields were added to the struct. If it is, we should populate those fields; if it is not, then we cannot. This is only useful on platforms where additional fields have genuinely been added during the lifetime of SDL 2, like Windows and DirectFB (but not X11). This commit changes the first check to be consistent about only looking at the minor version, while leaving the second check using SDL_VERSIONNUM (which will be removed or widened in SDL 3, but it's fine for now). Resolves: https://github.com/libsdl-org/SDL/issues/5711 Fixes: cd7c2f1 "Switch versioning scheme to be the same as GLib and Flatpak" Signed-off-by: Simon McVittie <smcv@collabora.com>
9edd411a	2022-05-19T17:15:10	x11: send move/resize events when waiting on fullscreen change. Otherwise we ignore the Configure/etc events when they come in because the window is already in an identical state as far as SDL is concerned. Fixes #5593. May also fix: Issue #5572. Issue #5595.
501a4991	2022-05-05T18:44:32	Add clang-format on/off comments where necessary. Comments were added in places where INDENT-ON/OFF comments are. Places like stdlib's asm don't need it as clang-format doesn't try to indent it.
c7dff3a2	2022-05-19T00:35:22	Attempt to get the X1 and X2 button state on X11 by using the current event state instead of direct X11 query.
57130b75	2022-05-19T00:31:20	Revert "x11: get x1/x2 button state in GetGlobalMouseState" This reverts commit 3fcc2cb500a752698687ad0c8bb14778e6cb84c3. Button4 and Button5 are for the scrollwheel, not the extended buttons. I don't know of a way to query the state of the extended buttons using X11.
2317a96c	2022-05-16T10:50:13	x11: Use XC_top_left_corner/XC_top_right_corner instead of XC_fleur. On Gnome (and hopefully others!), this produces something that actually matches SDL_SYSTEM_CURSOR_SIZENWSE/SDL_SYSTEM_CURSOR_SIZENESW. On other desktop enviroments, it probably fits the spirit better than XC_fleur in any case. Reference Issue #2123.
3fcc2cb5	2022-05-03T11:19:39	x11: get x1/x2 button state in GetGlobalMouseState
12f15aaa	2022-04-27T10:03:32	fix build
05bd225a	2022-04-26T23:14:44	x11: If XRandR isn't available, add a generic display. We can get _some_ of the info we need out of standard Xlib and report a single display (which might actually be multiple physical displays mushed into a single desktop). This is better than nothing, but you should really just build with XRandR support and get a better X server. :)
ccc70e64	2022-04-26T23:14:21	x11: Fixed some compiler warnings.
7d7ec9c9	2022-04-26T16:41:28	x11: Remove XVidMode and Xinerama support. Fixes #1782.
01ef98a5	2022-04-26T10:19:03	Don't force keyboard auto-repeat on, if the user has disabled it for some reason Fixes https://github.com/libsdl-org/SDL/issues/2400
53dea983	2022-04-25T13:51:15	x11: revert checks for _NET_WM_STATE_FULLSCREEN changes. This reverts commit 85977354fbce9ecb2add660a88e6bec3532c3e26. This reverts commit 0249df9d960f9bc28b476e1171c5501fc37cca12. Fixes #5572. Reopens #5390.
02225aa7	2022-04-18T22:57:03	Fixed build
49a2e4b0	2022-04-19T00:36:53	x11: Revert "Fix keymap updating for X11 backend" This reverts commit de6d290266d1def0eef9df81bf9be41c12a98c61. This patch had multiple issues, discussed in #5520.
67e0f546	2022-04-15T18:24:57	x11: Update the display when the WM changes a window's fullscreen state. Fixes #5390.
49b9e347	2022-04-07T08:24:03	Only update modifier state for keys that are pressed in another application Fixes https://github.com/libsdl-org/SDL/issues/4432
85977354	2022-04-07T09:14:33	x11: Treat WM setting the window "fullscreen" like FULLSCREEN_DESKTOP. Fixes #5390.
0249df9d	2022-04-05T23:04:19	x11: Try to keep SDL_WINDOW_FULLSCREEN* in sync with window manager. So if Gnome/KDE/etc have a keyboard shortcut or titlebar decoration to make any window go fullscreen (with the _NET_WM_FULLSCREEN flag on the _NET_WM_STATE property), we update the SDL window flag. Fixes #5390.
138d96c8	2022-04-05T19:30:25	Send key release event to input method. (#5281) Co-authored-by: Ethan Lee <flibitijibibo@gmail.com>
8bae343f	2022-04-05T22:19:25	x11: when waiting on fullscreen changes, not window position _and_ size. This makes sure the window doesn't have outdated values if you try to access them (or call something that does, like SDL_SetWindowMinimumSize). Fixes #5233.
a5672b85	2022-04-05T11:10:41	x11: Wait a bit to see if window pos changes when changing fullscreen. Helps prevent window from moving to 0,0 when leaving fullscreen. Fixes #4749.
45372b1c	2022-04-04T21:36:25	x11: Don't unload libGL.so to prevent a crash in XCloseDisplay() libGL.so may register callbacks that can be invoked upon XCloseDisplay(). If XCloseDisplay() is called after libGL.so is unloaded, the callback pointer will point at freed memory and invoking it will crash. The texture framebuffer check optimized out in f37e4a9 was causing libGL.so to never be unloaded as a side-effect. Skipping it exposed this bug by allowing libGL.so to actually unload.
1c7bf478	2022-03-31T10:09:02	x11: Ignore BadValue for extremely small XRRSetScreenSize resolutions. Reference Issue #4840.
7e15ad2f	2022-03-30T14:15:52	x11: Catch X11 errors in X11_SetWindowPosition and X11_SetWindowSize. The functions can go south if other operations are in progress, like X11_SetWindowBordered, which might be doing something traumatic behind the scenes of the window manager. We can't make these tasks totally synchronous, which would fix the problem, because not only can the window manager block however long it wants, it might also decide to deny our requests without any notification, so we'd be waiting forever for a window change that isn't coming. :( Fixes #5274.
d597a9b4	2022-03-24T14:25:00	x11: Minor cleanups and corrections in X11_ShowMessageBox. Reference issue #3254.
6c56193a	2022-03-24T18:09:45	Fixed bug #1650: X11 doesn't set KMOD_NUM and KMOD_CAPS to system state
85e65000	2022-02-11T11:08:08	X11 Segmentation fault with multiple windows and renderers (see #5256)
8c660ccb	2022-01-25T17:14:01	Fixed bug #5256: X11 Segmentation fault with multiple windows and renderers First window is created and it triggers and 'EnterNotify' event which calls SDL_SetMouseFocus() and X11_ShowCursor() while the second windows hasn't finished to be created (eg window->driverdata isn't set) Just check for a valid 'driverdata'
42302d0a	2022-01-11T21:17:21	x11: Let apps specify a custom _NET_WM_WINDOW_TYPE. Fixes #5185.
120c76c8	2022-01-03T09:40:00	Updated copyright for 2022
0403fa8a	2022-01-02T02:36:23	X11_WaitEventTimeout: remove unreachable return If that condition was reachable, the return value should be negative to indicate that waiting for the timeout failed. Otherwise, SDL_WaitEventTimeout would incorrectly return early.
6101499c	2021-12-16T09:07:31	BigEndian: fix code that generates illegal instruction with gcc-4.9.2 on powerpc Program received signal SIGILL, Illegal instruction. X11_InitKeyboard (_this=0x1001f8f0) at /home/sdl/SDL_git/src/video/x11/SDL_x11keyboard.c:273 273 XKeyboardState values = { .global_auto_repeat = AutoRepeatModeOff };
9da93d07	2021-12-08T12:38:16	video: x11: Set XImage's byte_order field (fix #5081) If the X server's byte order is different from the client, things might display in the wrong colour. Apparently we can just set the byte_order field to the client's byte order, and the X server will adjust everything automatically: https://xorg.freedesktop.narkive.com/GbSD1aPq/ximage-s-byte-order-field
03019c91	2021-12-06T20:37:52	autotools, cmake: tighten Xfixes check && explicitly test BarrierEventID Apparently the older versions of libXi doesn't have it. Fixes the build break issue reported at: https://github.com/libsdl-org/SDL/commit/4b42c05ba1eaaaa9a4ef803acea8f13402271039#commitcomment-61427659
f6fdbc1e	2021-11-29T21:16:15	video: x11: Fix an invalid SDL_LogError() call This fixes a compile warning — and possible invalid memory read — introduced in 9c03d255 ("Add back X11 legacy WM_NAME encodings"), which was part of PR #5029, fixing Bug #4924. The issue is with one of the added warnings in X11_GetWindowTitle(). Basically, the "title" variable passed to SDL_LogError() hasn't been initialised yet: we could pass propdata in directly, but it's better to move the SDL_LogError() call until after title is set, IMHO. This fixes the following warning from gcc (SUSE Linux) 11.2.1: In file included from /home/david/Development/SDL/src/video/x11/../../SDL_internal.h:45, from /home/david/Development/SDL/src/video/x11/SDL_x11window.c:21: /home/david/Development/SDL/src/video/x11/SDL_x11window.c: In function 'X11_GetWindowTitle': /home/david/Development/SDL/src/video/x11/../../dynapi/SDL_dynapi_overrides.h:33:22: warning: '%s' directive argument is null [-Wformat-overflow=] 33 \| #define SDL_LogDebug SDL_LogDebug_REAL /home/david/Development/SDL/src/video/x11/SDL_x11window.c:720:13: note: in expansion of macro 'SDL_LogDebug' 720 \| SDL_LogDebug(SDL_LOG_CATEGORY_VIDEO, "Failed to convert WM_NAME title expecting UTF8! Title: %s", title); \| ^~~~~~~~~~~~
b5d47aa2	2021-11-28T23:15:31	Fix comment style for old compilers (`//`⇒`/**/`)
367684b0	2021-11-28T22:56:24	Add patches suggested by @slouken in round 1 review
9c03d255	2021-11-28T16:18:39	Add back X11 legacy WM_NAME encodings Closes #4924. Based on patches of the past, such as this work by James Cloos in July 2010: https://github.com/exg/rxvt-unicode/commit/d7d98751b7385416ad1694b5f1fde6c312ba20d5, as well as code comments in the Perl module X11::Protocol::WM (https://metacpan.org/pod/X11::Protocol::WM) and even the code to Xlib itself, which taught me that we should never have been using `XStoreName`, all it does is call `XChangeProperty`, hardcoded to `XA_STRING`! What can I say, when the task is old school, the sources are too 😂
fae70349	2021-11-23T10:33:12	Fix warnings: static, include, un-initialized vairables
8dd6edec	2021-11-23T09:30:42	Fixed bug #3232 - Integer overflow generates Illegal instruction under sanitizers + see bug #4995
9fcc630f	2021-11-22T16:37:34	X11: use SDL_malloc
b4aeaa30	2021-11-22T11:20:52	Use SDL_calloc / SDL_free
d31251b0	2021-11-21T22:30:48	use SDL's functions version inplace of libc version
7dfd22ac	2021-11-14T02:32:00	fix XGetDefault signature - its first and second params are _Xconst
eb3f1462	2021-11-12T18:26:15	x11: Fix memory leak in X11_CreatePixmapCursor()
c2dd50a9	2021-11-12T08:28:02	Fixed whitespace
eda4c407	2021-11-10T12:46:54	Make sure the X event is an Xkb event before checking the Xkb event type
18e69827	2021-11-08T22:29:02	Fixed Linux build
fd79607e	2021-11-08T21:34:48	Added SDL_GetWindowMouseRect() Also guarantee that we won't get mouse movement outside the confining area, even if the OS implementation allows it (e.g. macOS)
9c95c249	2021-11-08T20:01:56	x11: Use XCheckIfEvent() instead of XNextEvent() for thread-safety A racing reader could read from our fd between SDL_IOReady()/X11_Pending() and our call to XNextEvent() which will cause XNextEvent() to block for more data. Avoid this by using XCheckIfEvent() which will never block. This also fixes a bug where we could poll() for data, even when events were already read and pending in the queue. Unlike the Wayland implementation, this isn't totally thread-safe because nothing prevents a racing reader from reading events into the queue between our XCheckIfEvent() and SDL_IOReady() calls, but I think this is the best we can do with Xlib.
7d21322d	2021-11-08T16:29:19	Implemented SDL_SetWindowMouseRect() on Windows
4b42c05b	2021-11-08T13:52:48	video: Add SDL_SetWindowMouseRect. This API and implementation comes from the Unreal Engine branch of SDL, which originally called this "SDL_ConfineCursor". Some minor cleanup and changes for consistency with the rest of SDL_video, but there are two major changes: 1. The coordinate system has been changed so that `rect` is _window_ relative and not _screen_ relative, making it easier to implement without having global access to the display. 2. The UE version unset all rects when passing `NULL` as a parameter for `window`, this has been removed as it was an unused feature anyhow. Currently this is only implemented for X, but can be supported on Wayland and Windows at minimum too.
6c56e275	2021-11-08T07:05:17	Set both _NET_WM_NAME and WM_NAME so SDL windows can be shared in the browser. Fixes https://github.com/libsdl-org/SDL/issues/4924
a5598649	2021-10-30T19:30:34	x11/wayland: Fix signal handling while blocking in WaitEventTimeout() Add a new flag to avoid suppressing EINTR in SDL_IOReady(). Pass the flag in WaitEventTimeout() to ensure that a SIGINT will wake up SDL_WaitEvent() without another event coming in.
c97c4687	2021-10-30T15:56:54	core: Convert SDL_IOReady()'s 2nd parameter to flags
f499168c	2021-10-24T15:54:57	x11: Use SDL_IOReady() instead of calling select() directly SDL_IOReady() properly handles EINTR and can use poll() if available.
19dee1cd	2021-10-22T06:37:20	Add SDL_GetWindowICCProfile(). (#4314) * Add SDL_GetWindowICCProfile * Add new SDL display events * Implement ICC profile change event for macOS * Implement ICC profile notification for Windows * Fix SDL_GetWindowICCProfile() for X11 * Fix compile errors
649a33ae	2021-10-18T23:00:43	X11: remove redundant 'wakeup_lock' mutex creation
7ed415d2	2021-09-23T14:07:38	wayland: Reuse KeySymToUcs4 to replicate X11 keymap behavior
478f9eed	2021-09-20T10:20:04	x11: Don't include X11/extensions/extutil.h We don't use it, it was a leftover from 1.2, I think, and it doesn't exist on Solaris, so this should hopefully fix the build there. This also means we don't need the configure/cmake checks for SDL_VIDEO_DRIVER_X11_CONST_PARAM_XEXTADDDISPLAY, so that was removed also. Fixes #1666.
515b7e93	2021-08-27T17:02:07	Fix horizontal wheel scroll direction of X11.
d5fe9c30	2021-08-24T14:18:47	x11: Log a warning if we decide to use XVidMode. Reference issue #1782.
25cd749a	2021-08-12T15:12:04	x11: Don't change mode if we are already in the correct mode If we are already in the desired mode, changing it is a no-op at best, and harmful at worst: on Xwayland, it sometimes happens that we disable the crtc and cannot re-enable it. Resolves: https://github.com/libsdl-org/SDL/issues/4630 Signed-off-by: Simon McVittie <smcv@collabora.com>
cb1e20b0	2021-08-10T17:50:17	Added KMOD_SCROLL to track the scroll lock state Fixes https://github.com/libsdl-org/SDL/issues/4566
77c8d111	2021-08-10T20:55:50	configuration updates for dlopen: - cmake, configure (CheckDLOPEN): --enable-sdl-dlopen is now history.. detach the dl api discovery from SDL_LOADSO_DLOPEN functionality. define HAVE_DLOPEN. also define DYNAPI_NEEDS_DLOPEN (CheckDLOPEN is called only for relevant platforms.) - update SDL_config.in and SDL_config.cmake accordingly. - SDL_dynapi.h: set SDL_DYNAMIC_API to 0 if DYNAPI_NEEDS_DLOPEN is defined, but HAVE_DLOPEN is not. - pthread/SDL_systhread.c: conditionalize dl api use to HAVE_DLOPEN - SDL_x11opengl.c, SDL_DirectFB_opengl.c, SDL_naclopengles.c: rely on HAVE_DLOPEN, not SDL_LOADSO_DLOPEN. - SDL_config_android.h, SDL_config_iphoneos.h, SDL_config_macosx.h, SDL_config_pandora.h, and SDL_config_wiz.h: define HAVE_DLOPEN. Closes: https://github.com/libsdl-org/SDL/pull/4351
6ae227d0	2021-08-08T23:27:08	x11/wayland: fix screensaver suspension via D-Bus b08b1bde introduced a subtle bug. Despite not using D-Bus types directly, the code used the SDL_USE_LIBDBUS definition set by SDL_dbus.h to conditionally compile calls SDL_DBus_ScreensaverTickle() and SDL_DBus_ScreensaverInhibit(). As a result, it still compiled without SDL_dbus.h included, but screensaver suspension silently failed to work. The D-Bus stuff could probably use some tweaks to be harder to accidentally break, but for now just restore the header includes.
b08b1bde	2021-08-03T22:50:58	linux: remove d-bus lazy init dead code Lazy init in X11/Wayland is dead code since dbdbae4
b033cd0d	2021-07-31T16:01:48	Fixed XSync sequence to match other cases where we set the X11 error handler
4c7825f6	2021-07-31T18:27:14	x11: XSync while trying to catch XRRSetScreenSize error. Reference issue #4561
d0effadf	2021-07-31T15:56:30	x11: Don't let XRRSetScreenSize fire a BadMatch error. This is a workaround and not a proper fix, but this is possibly complicated, and possibly a corner case, so this will do for 2.0.16, if not the foreseeable future. Reference issue #4561
8f38ba4d	2021-07-29T18:02:47	Fix casts that should be using uintptr_t This is needed to support CHERI, and thus Arm's experimental Morello prototype, where pointers are implemented using unforgeable capabilities that include bounds and permissions metadata to provide fine-grained spatial and referential memory safety, as well as revocation by sweeping memory to provide heap temporal memory safety. On most systems (anything with a flat memory hierarchy rather than using segment-based addressing), size_t and uintptr_t are the same type. However, on CHERI, size_t is just an integer offset, whereas uintptr_t is still a capability as described above. Casting a pointer to size_t will strip the metadata and validity tag, and casting from size_t to a pointer will result in a null-derived capability whose validity tag is not set, and thus cannot be dereferenced without faulting. The audio and cursor casts were harmless as they intend to stuff an integer into a pointer, but using uintptr_t is the idiomatic way to do that and silences our compiler warnings (which our build tool makes fatal by default as they often indicate real problems). The iconv and egl casts were true positives as SDL_iconv_t and iconv_t are pointer types, as is NativeDisplayType on most OSes, so this would have trapped at run time when using the round-tripped pointers. The gles2 casts were also harmless; the OpenGL API defines this argument to be a pointer type (and uses the argument name "pointer"), but it in fact represents an integer offset, so like audio and cursor the additional idiomatic cast is needed to silence the warning.
1e07dba0	2021-06-09T15:26:38	x11: Use glXChooseFBConfig when available in X11_GL_GetVisual When choosing an X11 Visual for a window based on its GLX capabilities, first try glXChooseFBConfig (if available) before falling back to glXChooseVisual. This normally does not make a difference because most GLX drivers create a Visual for every GLXFBConfig, exposing all of the same capabilities. For GLX render offload configurations (also know as "PRIME") where one GPU is providing GLX rendering support for windows on an X screen running on a different GPU, the GPU doing the offloading needs to use the Visuals that were created by the host GPU's driver rather than being able to add its own. This means that there may be fewer Visuals available for all of the GLXFBConfigs the guest driver wants to expose. In order to handle that situation, the NVIDIA GLX driver creates many GLXFBConfigs that map to the same Visual when running in a render offload configuration. This can result in a glXChooseVisual request failing to find a supported Visual when there is a GLXFBConfig for that configuration that would have worked. For example, when the game "Unnamed SDVX Clone" [1] tries to create a configuration with multisample, glXChooseVisual fails because the Visual assigned to the multisample GLXFBConfigs is shared with the GLXFBConfigs without multisample. Avoid this problem by using glXChooseFBConfig, when available, to find a GLXFBConfig with the requested capabilities and then using glXGetVisualFromFBConfig to find the corresponding X11 Visual. This allows the game to run, although it doesn't make me any better at actually playing it... Signed-off-by: Aaron Plattner <aplattner@nvidia.com> Fixes: https://forums.developer.nvidia.com/t/prime-run-cannot-create-window-x-glxcreatecontext/180214 [1] https://github.com/Drewol/unnamed-sdvx-clone
a2031948	2021-07-28T14:06:51	Added in a MIME-type to the X11 clipboard. (#4385)
8e604a5f	2021-07-25T18:44:33	Fix error handling in X11_SetWindowTitle X11_XChangeProperty return 1 on success.
ff1b5e1b	2021-07-24T15:10:57	Implemented the window flash operations for X11
f1633127	2021-07-24T13:41:55	Added a window flash operation to be explicit about window flash behavior
e1c3a250	2021-07-24T12:11:27	Changed SDL_FlashWindow() so it doesn't take a flash count, and added the hint SDL_HINT_WINDOW_FLASH_COUNT to control behavior on Windows
16e3bfe8	2021-06-28T11:29:16	SetDisplayMode: Call XRRSetScreenSize before setting CRTC config X11_SetDisplayMode currently calls X11_XRRSetCrtcConfig alone. This results in the monitor's viewport getting changed, but the underlying screen dimensions stay the same. The spec indicates that RRSetCrtcConfig only changes the crtc mode and has no effect on the screen dimensions, only mentioning that the new crtc must fit entirely within the screen size. For the size to change, RRSetScreenSize also needs to be called. This affects Metro Exodus on Linux, when changing the resolution in the in-game settings Metro gets stuck in a loop waiting for the size of its vulkan surface to change. Because XRRSetScreenSize is not called the screen size is never changed, the vulkan surface dimensions do not change, and Metro hangs forever watching for a surface size update that will never come. This change disables the CRTC, calls XRRSetScreenSize, and then updates the CRTC configuration. This fixes changing the resolution from the Metro settings. Tested with: Metro Exodus, Portal 2
e65a6583	2021-06-09T22:10:20	x11: Add a hint to force override-redirect. Fixes #3776.
64724db0	2021-06-04T19:55:30	Implement bare minimum for SDL_FlashWindow
0dd7024d	2021-03-12T21:58:20	Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
4522cb1d	2021-05-25T03:17:03	Changing variable from float to int, this way we can check it's value without having to do an unnecessary conversion. Then do explicit conversions later on if we need.
c289bad9	2021-03-22T11:22:31	In x11, GetDisplayDPI can give incorrect or unusable DPI information. Using XGetDefaults to get the Xft DPI if it's available and returning that. This could allow you to figure out DPI scale.
62a562de	2021-05-12T23:37:18	X11: use x11sym loaded functions (see bug #3978)
531d83bf	2021-05-12T23:13:48	X11: allow using touchscreen, while pointer is grabbed (see bug #3978)
c5dd9964	2021-04-07T12:14:16	Copied X11 error handler code from SDL_x11opengl.c Avoids needing to malloc to hold the error string.
b3b4677e	2021-04-07T11:17:52	(X11) Set _NET_WM_NAME properly, fixes Unicode window titles Removes deprecated code meant to support extremely ancient, pre-UTF-8 versions of Xorg. Uses new xlib API's for doing this same thing. Closes #4288.
1f482174	2021-04-25T12:44:35	x11: Mark backing_store as NotUseful when creating windows. This can give some performance boost, and save some resources, as there's no reason to keep a copy of an SDL window's contents on the server: most SDL apps are redrawing completely every frame, and the API allows for expose events to tell an app a redraw is needed anyhow. (And compositors are free to ignore this setting if it makes sense to do so, according to the Xlib docs.) Reference Issue #3776.
9c063468	2021-04-24T19:47:10	x11: call XSync before XSetInputFocus during SDL_ShowWindow. This only happens when using a non-NET_WM window manager, as we might try to set the focus before the window is mapped. Fixes #3949.
0838f53d	2021-04-21T11:41:08	Implement SDL_SetWindowAlwaysOnTop for X11
de6d2902	2021-04-19T21:48:11	Fix keymap updating for X11 backend
dbdbae44	2021-04-02T14:35:11	linux: (de)initialize d-bus at init and quit. Previously we had different subsystems quitting it, in conflict, and risked multiple threads racing to init it at the same time. Fixes #3643.
808249a5	2021-01-27T19:40:55	X11: Ungrab the keyboard when the mouse leaves the window GNOME Mutter requires keyboard grab for certain important functionality like window resizing, interaction with the application context menu, and opening the Activites view. To allow Mutter to grab the keyboard as needed, we'll ungrab when the mouse leaves our window. To be safe, we'll do this for all WMs since forks of Mutter and Matacity (and possibly others) may have the same behavior, and we don't want to have to keep track of those.
6b057c67	2021-01-26T19:16:17	Expose separate keyboard and mouse grab support This adds SDL_SetWindowKeyboardGrab(), SDL_GetWindowKeyboardGrab(), SDL_SetWindowMouseGrab(), SDL_GetWindowMouseGrab(), and new SDL_WINDOW_KEYBOARD_GRABBED flag. It also updates the test harness to exercise this functionality and makes a minor fix to X11 that I missed in https://hg.libsdl.org/SDL/rev/02a2d609369b To fit in with this new support, SDL_WINDOW_INPUT_CAPTURE has been renamed to SDL_WINDOW_MOUSE_CAPTURE with the old name remaining as an alias for backwards compatibility with older code.
a0d3c6c6	2021-01-25T21:42:14	Rename SetWindowGrab() to SetWindowMouseGrab()

63b3b9a5

2022-06-13T16:02:40

Fix some typos in diagnostic messages Detected by Debian's packaging QA tool, Lintian. Signed-off-by: Simon McVittie <smcv@collabora.com>

b75cd2b3

2022-06-10T14:12:03

x11: Force window back to expected size after SDL_SetWindowBordered. This helps if the window manager decided to let it fill the space that an existing border was using before its removal. Fixes #5718.

ec0204d2

2022-06-06T14:38:26

x11: Don't use GetXftDPI() when XRandR can tell us the DPI per-output. Fixes #5764.

a236bf4f

2022-06-06T02:13:37

x11: Hook up display hotplug notifications. Obviously this needs XRandR support. Fixes #4977.

412ceb84

2022-05-24T16:27:54

video: Only check major version in SDL_GetWindowWMInfo Since #5602, SDL is intended to have the same ABI across the whole major-version 2 cycle, so we should not check that the minor version matches the one that was used to compile an application. There are two checks that could make sense here. The first check is that the major version matches the expected major version. This is usually unnecessary and is not usually done (if we're calling into the wrong library we'll likely crash anyway), but since we have the information, we might as well continue to use it. The second check is whether the version provided by the caller is equal to or greater than a threshold version at which additional fields were added to the struct. If it is, we should populate those fields; if it is not, then we cannot. This is only useful on platforms where additional fields have genuinely been added during the lifetime of SDL 2, like Windows and DirectFB (but not X11). This commit changes the first check to be consistent about only looking at the minor version, while leaving the second check using SDL_VERSIONNUM (which will be removed or widened in SDL 3, but it's fine for now). Resolves: https://github.com/libsdl-org/SDL/issues/5711 Fixes: cd7c2f1 "Switch versioning scheme to be the same as GLib and Flatpak" Signed-off-by: Simon McVittie <smcv@collabora.com>

9edd411a

2022-05-19T17:15:10

x11: send move/resize events when waiting on fullscreen change. Otherwise we ignore the Configure/etc events when they come in because the window is already in an identical state as far as SDL is concerned. Fixes #5593. May also fix: Issue #5572. Issue #5595.

501a4991

2022-05-05T18:44:32

Add clang-format on/off comments where necessary. Comments were added in places where INDENT-ON/OFF comments are. Places like stdlib's asm don't need it as clang-format doesn't try to indent it.

c7dff3a2

2022-05-19T00:35:22

Attempt to get the X1 and X2 button state on X11 by using the current event state instead of direct X11 query.

57130b75

2022-05-19T00:31:20

Revert "x11: get x1/x2 button state in GetGlobalMouseState" This reverts commit 3fcc2cb500a752698687ad0c8bb14778e6cb84c3. Button4 and Button5 are for the scrollwheel, not the extended buttons. I don't know of a way to query the state of the extended buttons using X11.

2317a96c

2022-05-16T10:50:13

x11: Use XC_top_left_corner/XC_top_right_corner instead of XC_fleur. On Gnome (and hopefully others!), this produces something that actually matches SDL_SYSTEM_CURSOR_SIZENWSE/SDL_SYSTEM_CURSOR_SIZENESW. On other desktop enviroments, it probably fits the spirit better than XC_fleur in any case. Reference Issue #2123.

3fcc2cb5

2022-05-03T11:19:39

x11: get x1/x2 button state in GetGlobalMouseState

12f15aaa

2022-04-27T10:03:32

fix build

05bd225a

2022-04-26T23:14:44

x11: If XRandR isn't available, add a generic display. We can get _some_ of the info we need out of standard Xlib and report a single display (which might actually be multiple physical displays mushed into a single desktop). This is better than nothing, but you should really just build with XRandR support and get a better X server. :)

ccc70e64

2022-04-26T23:14:21

x11: Fixed some compiler warnings.

7d7ec9c9

2022-04-26T16:41:28

x11: Remove XVidMode and Xinerama support. Fixes #1782.

01ef98a5

2022-04-26T10:19:03

Don't force keyboard auto-repeat on, if the user has disabled it for some reason Fixes https://github.com/libsdl-org/SDL/issues/2400

53dea983

2022-04-25T13:51:15

x11: revert checks for _NET_WM_STATE_FULLSCREEN changes. This reverts commit 85977354fbce9ecb2add660a88e6bec3532c3e26. This reverts commit 0249df9d960f9bc28b476e1171c5501fc37cca12. Fixes #5572. Reopens #5390.

02225aa7

2022-04-18T22:57:03

Fixed build

49a2e4b0

2022-04-19T00:36:53

x11: Revert "Fix keymap updating for X11 backend" This reverts commit de6d290266d1def0eef9df81bf9be41c12a98c61. This patch had multiple issues, discussed in #5520.

67e0f546

2022-04-15T18:24:57

x11: Update the display when the WM changes a window's fullscreen state. Fixes #5390.

49b9e347

2022-04-07T08:24:03

Only update modifier state for keys that are pressed in another application Fixes https://github.com/libsdl-org/SDL/issues/4432

85977354

2022-04-07T09:14:33

x11: Treat WM setting the window "fullscreen" like FULLSCREEN_DESKTOP. Fixes #5390.

0249df9d

2022-04-05T23:04:19

x11: Try to keep SDL_WINDOW_FULLSCREEN* in sync with window manager. So if Gnome/KDE/etc have a keyboard shortcut or titlebar decoration to make any window go fullscreen (with the _NET_WM_FULLSCREEN flag on the _NET_WM_STATE property), we update the SDL window flag. Fixes #5390.

138d96c8

2022-04-05T19:30:25

Send key release event to input method. (#5281) Co-authored-by: Ethan Lee <flibitijibibo@gmail.com>

8bae343f

2022-04-05T22:19:25

x11: when waiting on fullscreen changes, not window position _and_ size. This makes sure the window doesn't have outdated values if you try to access them (or call something that does, like SDL_SetWindowMinimumSize). Fixes #5233.

a5672b85

2022-04-05T11:10:41

x11: Wait a bit to see if window pos changes when changing fullscreen. Helps prevent window from moving to 0,0 when leaving fullscreen. Fixes #4749.

45372b1c

2022-04-04T21:36:25

x11: Don't unload libGL.so to prevent a crash in XCloseDisplay() libGL.so may register callbacks that can be invoked upon XCloseDisplay(). If XCloseDisplay() is called after libGL.so is unloaded, the callback pointer will point at freed memory and invoking it will crash. The texture framebuffer check optimized out in f37e4a9 was causing libGL.so to never be unloaded as a side-effect. Skipping it exposed this bug by allowing libGL.so to actually unload.

1c7bf478

2022-03-31T10:09:02

x11: Ignore BadValue for extremely small XRRSetScreenSize resolutions. Reference Issue #4840.

7e15ad2f

2022-03-30T14:15:52

x11: Catch X11 errors in X11_SetWindowPosition and X11_SetWindowSize. The functions can go south if other operations are in progress, like X11_SetWindowBordered, which might be doing something traumatic behind the scenes of the window manager. We can't make these tasks totally synchronous, which would fix the problem, because not only can the window manager block however long it wants, it might also decide to deny our requests without any notification, so we'd be waiting forever for a window change that isn't coming. :( Fixes #5274.

d597a9b4

2022-03-24T14:25:00

x11: Minor cleanups and corrections in X11_ShowMessageBox. Reference issue #3254.

6c56193a

2022-03-24T18:09:45

Fixed bug #1650: X11 doesn't set KMOD_NUM and KMOD_CAPS to system state

85e65000

2022-02-11T11:08:08

X11 Segmentation fault with multiple windows and renderers (see #5256)

8c660ccb

2022-01-25T17:14:01

Fixed bug #5256: X11 Segmentation fault with multiple windows and renderers First window is created and it triggers and 'EnterNotify' event which calls SDL_SetMouseFocus() and X11_ShowCursor() while the second windows hasn't finished to be created (eg window->driverdata isn't set) Just check for a valid 'driverdata'

42302d0a

2022-01-11T21:17:21

x11: Let apps specify a custom _NET_WM_WINDOW_TYPE. Fixes #5185.

120c76c8

2022-01-03T09:40:00

Updated copyright for 2022

0403fa8a

2022-01-02T02:36:23

X11_WaitEventTimeout: remove unreachable return If that condition was reachable, the return value should be negative to indicate that waiting for the timeout failed. Otherwise, SDL_WaitEventTimeout would incorrectly return early.

6101499c

2021-12-16T09:07:31

BigEndian: fix code that generates illegal instruction with gcc-4.9.2 on powerpc Program received signal SIGILL, Illegal instruction. X11_InitKeyboard (_this=0x1001f8f0) at /home/sdl/SDL_git/src/video/x11/SDL_x11keyboard.c:273 273 XKeyboardState values = { .global_auto_repeat = AutoRepeatModeOff };

9da93d07

2021-12-08T12:38:16

video: x11: Set XImage's byte_order field (fix #5081) If the X server's byte order is different from the client, things might display in the wrong colour. Apparently we can just set the byte_order field to the client's byte order, and the X server will adjust everything automatically: https://xorg.freedesktop.narkive.com/GbSD1aPq/ximage-s-byte-order-field

03019c91

2021-12-06T20:37:52

autotools, cmake: tighten Xfixes check && explicitly test BarrierEventID Apparently the older versions of libXi doesn't have it. Fixes the build break issue reported at: https://github.com/libsdl-org/SDL/commit/4b42c05ba1eaaaa9a4ef803acea8f13402271039#commitcomment-61427659

f6fdbc1e

2021-11-29T21:16:15

video: x11: Fix an invalid SDL_LogError() call This fixes a compile warning — and possible invalid memory read — introduced in 9c03d255 ("Add back X11 legacy WM_NAME encodings"), which was part of PR #5029, fixing Bug #4924. The issue is with one of the added warnings in X11_GetWindowTitle(). Basically, the "title" variable passed to SDL_LogError() hasn't been initialised yet: we could pass propdata in directly, but it's better to move the SDL_LogError() call until after title is set, IMHO. This fixes the following warning from gcc (SUSE Linux) 11.2.1: In file included from /home/david/Development/SDL/src/video/x11/../../SDL_internal.h:45, from /home/david/Development/SDL/src/video/x11/SDL_x11window.c:21: /home/david/Development/SDL/src/video/x11/SDL_x11window.c: In function 'X11_GetWindowTitle': /home/david/Development/SDL/src/video/x11/../../dynapi/SDL_dynapi_overrides.h:33:22: warning: '%s' directive argument is null [-Wformat-overflow=] 33 | #define SDL_LogDebug SDL_LogDebug_REAL /home/david/Development/SDL/src/video/x11/SDL_x11window.c:720:13: note: in expansion of macro 'SDL_LogDebug' 720 | SDL_LogDebug(SDL_LOG_CATEGORY_VIDEO, "Failed to convert WM_NAME title expecting UTF8! Title: %s", title); | ^~~~~~~~~~~~

b5d47aa2

2021-11-28T23:15:31

Fix comment style for old compilers (`//`⇒`/**/`)

367684b0

2021-11-28T22:56:24

Add patches suggested by @slouken in round 1 review

9c03d255

2021-11-28T16:18:39

Add back X11 legacy WM_NAME encodings Closes #4924. Based on patches of the past, such as this work by James Cloos in July 2010: https://github.com/exg/rxvt-unicode/commit/d7d98751b7385416ad1694b5f1fde6c312ba20d5, as well as code comments in the Perl module X11::Protocol::WM (https://metacpan.org/pod/X11::Protocol::WM) and even the code to Xlib itself, which taught me that we should never have been using `XStoreName`, all it does is call `XChangeProperty`, hardcoded to `XA_STRING`! What can I say, when the task is old school, the sources are too 😂

fae70349

2021-11-23T10:33:12

Fix warnings: static, include, un-initialized vairables

8dd6edec

2021-11-23T09:30:42

Fixed bug #3232 - Integer overflow generates Illegal instruction under sanitizers + see bug #4995

9fcc630f

2021-11-22T16:37:34

X11: use SDL_malloc

b4aeaa30

2021-11-22T11:20:52

Use SDL_calloc / SDL_free

d31251b0

2021-11-21T22:30:48

use SDL's functions version inplace of libc version

7dfd22ac

2021-11-14T02:32:00

fix XGetDefault signature - its first and second params are _Xconst

eb3f1462

2021-11-12T18:26:15

x11: Fix memory leak in X11_CreatePixmapCursor()

c2dd50a9

2021-11-12T08:28:02

Fixed whitespace

eda4c407

2021-11-10T12:46:54

Make sure the X event is an Xkb event before checking the Xkb event type

18e69827

2021-11-08T22:29:02

Fixed Linux build

fd79607e

2021-11-08T21:34:48

Added SDL_GetWindowMouseRect() Also guarantee that we won't get mouse movement outside the confining area, even if the OS implementation allows it (e.g. macOS)

9c95c249

2021-11-08T20:01:56

x11: Use XCheckIfEvent() instead of XNextEvent() for thread-safety A racing reader could read from our fd between SDL_IOReady()/X11_Pending() and our call to XNextEvent() which will cause XNextEvent() to block for more data. Avoid this by using XCheckIfEvent() which will never block. This also fixes a bug where we could poll() for data, even when events were already read and pending in the queue. Unlike the Wayland implementation, this isn't totally thread-safe because nothing prevents a racing reader from reading events into the queue between our XCheckIfEvent() and SDL_IOReady() calls, but I think this is the best we can do with Xlib.

7d21322d

2021-11-08T16:29:19

Implemented SDL_SetWindowMouseRect() on Windows

4b42c05b

2021-11-08T13:52:48

video: Add SDL_SetWindowMouseRect. This API and implementation comes from the Unreal Engine branch of SDL, which originally called this "SDL_ConfineCursor". Some minor cleanup and changes for consistency with the rest of SDL_video, but there are two major changes: 1. The coordinate system has been changed so that `rect` is _window_ relative and not _screen_ relative, making it easier to implement without having global access to the display. 2. The UE version unset all rects when passing `NULL` as a parameter for `window`, this has been removed as it was an unused feature anyhow. Currently this is only implemented for X, but can be supported on Wayland and Windows at minimum too.

6c56e275

2021-11-08T07:05:17

Set both _NET_WM_NAME and WM_NAME so SDL windows can be shared in the browser. Fixes https://github.com/libsdl-org/SDL/issues/4924

a5598649

2021-10-30T19:30:34

x11/wayland: Fix signal handling while blocking in WaitEventTimeout() Add a new flag to avoid suppressing EINTR in SDL_IOReady(). Pass the flag in WaitEventTimeout() to ensure that a SIGINT will wake up SDL_WaitEvent() without another event coming in.

c97c4687

2021-10-30T15:56:54

core: Convert SDL_IOReady()'s 2nd parameter to flags

f499168c

2021-10-24T15:54:57

x11: Use SDL_IOReady() instead of calling select() directly SDL_IOReady() properly handles EINTR and can use poll() if available.

19dee1cd

2021-10-22T06:37:20

Add SDL_GetWindowICCProfile(). (#4314) * Add SDL_GetWindowICCProfile * Add new SDL display events * Implement ICC profile change event for macOS * Implement ICC profile notification for Windows * Fix SDL_GetWindowICCProfile() for X11 * Fix compile errors

649a33ae

2021-10-18T23:00:43

X11: remove redundant 'wakeup_lock' mutex creation

7ed415d2

2021-09-23T14:07:38

wayland: Reuse KeySymToUcs4 to replicate X11 keymap behavior

478f9eed

2021-09-20T10:20:04

x11: Don't include X11/extensions/extutil.h We don't use it, it was a leftover from 1.2, I think, and it doesn't exist on Solaris, so this should hopefully fix the build there. This also means we don't need the configure/cmake checks for SDL_VIDEO_DRIVER_X11_CONST_PARAM_XEXTADDDISPLAY, so that was removed also. Fixes #1666.

515b7e93

2021-08-27T17:02:07

Fix horizontal wheel scroll direction of X11.

d5fe9c30

2021-08-24T14:18:47

x11: Log a warning if we decide to use XVidMode. Reference issue #1782.

25cd749a

2021-08-12T15:12:04

x11: Don't change mode if we are already in the correct mode If we are already in the desired mode, changing it is a no-op at best, and harmful at worst: on Xwayland, it sometimes happens that we disable the crtc and cannot re-enable it. Resolves: https://github.com/libsdl-org/SDL/issues/4630 Signed-off-by: Simon McVittie <smcv@collabora.com>

cb1e20b0

2021-08-10T17:50:17

Added KMOD_SCROLL to track the scroll lock state Fixes https://github.com/libsdl-org/SDL/issues/4566

77c8d111

2021-08-10T20:55:50

configuration updates for dlopen: - cmake, configure (CheckDLOPEN): --enable-sdl-dlopen is now history.. detach the dl api discovery from SDL_LOADSO_DLOPEN functionality. define HAVE_DLOPEN. also define DYNAPI_NEEDS_DLOPEN (CheckDLOPEN is called only for relevant platforms.) - update SDL_config.in and SDL_config.cmake accordingly. - SDL_dynapi.h: set SDL_DYNAMIC_API to 0 if DYNAPI_NEEDS_DLOPEN is defined, but HAVE_DLOPEN is not. - pthread/SDL_systhread.c: conditionalize dl api use to HAVE_DLOPEN - SDL_x11opengl.c, SDL_DirectFB_opengl.c, SDL_naclopengles.c: rely on HAVE_DLOPEN, not SDL_LOADSO_DLOPEN. - SDL_config_android.h, SDL_config_iphoneos.h, SDL_config_macosx.h, SDL_config_pandora.h, and SDL_config_wiz.h: define HAVE_DLOPEN. Closes: https://github.com/libsdl-org/SDL/pull/4351

6ae227d0

2021-08-08T23:27:08

x11/wayland: fix screensaver suspension via D-Bus b08b1bde introduced a subtle bug. Despite not using D-Bus types directly, the code used the SDL_USE_LIBDBUS definition set by SDL_dbus.h to conditionally compile calls SDL_DBus_ScreensaverTickle() and SDL_DBus_ScreensaverInhibit(). As a result, it still compiled without SDL_dbus.h included, but screensaver suspension silently failed to work. The D-Bus stuff could probably use some tweaks to be harder to accidentally break, but for now just restore the header includes.

b08b1bde

2021-08-03T22:50:58

linux: remove d-bus lazy init dead code Lazy init in X11/Wayland is dead code since dbdbae4

b033cd0d

2021-07-31T16:01:48

Fixed XSync sequence to match other cases where we set the X11 error handler

4c7825f6

2021-07-31T18:27:14

x11: XSync while trying to catch XRRSetScreenSize error. Reference issue #4561

d0effadf

2021-07-31T15:56:30

x11: Don't let XRRSetScreenSize fire a BadMatch error. This is a workaround and not a proper fix, but this is possibly complicated, and possibly a corner case, so this will do for 2.0.16, if not the foreseeable future. Reference issue #4561

8f38ba4d

2021-07-29T18:02:47

Fix casts that should be using uintptr_t This is needed to support CHERI, and thus Arm's experimental Morello prototype, where pointers are implemented using unforgeable capabilities that include bounds and permissions metadata to provide fine-grained spatial and referential memory safety, as well as revocation by sweeping memory to provide heap temporal memory safety. On most systems (anything with a flat memory hierarchy rather than using segment-based addressing), size_t and uintptr_t are the same type. However, on CHERI, size_t is just an integer offset, whereas uintptr_t is still a capability as described above. Casting a pointer to size_t will strip the metadata and validity tag, and casting from size_t to a pointer will result in a null-derived capability whose validity tag is not set, and thus cannot be dereferenced without faulting. The audio and cursor casts were harmless as they intend to stuff an integer into a pointer, but using uintptr_t is the idiomatic way to do that and silences our compiler warnings (which our build tool makes fatal by default as they often indicate real problems). The iconv and egl casts were true positives as SDL_iconv_t and iconv_t are pointer types, as is NativeDisplayType on most OSes, so this would have trapped at run time when using the round-tripped pointers. The gles2 casts were also harmless; the OpenGL API defines this argument to be a pointer type (and uses the argument name "pointer"), but it in fact represents an integer offset, so like audio and cursor the additional idiomatic cast is needed to silence the warning.

1e07dba0

2021-06-09T15:26:38

x11: Use glXChooseFBConfig when available in X11_GL_GetVisual When choosing an X11 Visual for a window based on its GLX capabilities, first try glXChooseFBConfig (if available) before falling back to glXChooseVisual. This normally does not make a difference because most GLX drivers create a Visual for every GLXFBConfig, exposing all of the same capabilities. For GLX render offload configurations (also know as "PRIME") where one GPU is providing GLX rendering support for windows on an X screen running on a different GPU, the GPU doing the offloading needs to use the Visuals that were created by the host GPU's driver rather than being able to add its own. This means that there may be fewer Visuals available for all of the GLXFBConfigs the guest driver wants to expose. In order to handle that situation, the NVIDIA GLX driver creates many GLXFBConfigs that map to the same Visual when running in a render offload configuration. This can result in a glXChooseVisual request failing to find a supported Visual when there is a GLXFBConfig for that configuration that would have worked. For example, when the game "Unnamed SDVX Clone" [1] tries to create a configuration with multisample, glXChooseVisual fails because the Visual assigned to the multisample GLXFBConfigs is shared with the GLXFBConfigs without multisample. Avoid this problem by using glXChooseFBConfig, when available, to find a GLXFBConfig with the requested capabilities and then using glXGetVisualFromFBConfig to find the corresponding X11 Visual. This allows the game to run, although it doesn't make me any better at actually playing it... Signed-off-by: Aaron Plattner <aplattner@nvidia.com> Fixes: https://forums.developer.nvidia.com/t/prime-run-cannot-create-window-x-glxcreatecontext/180214 [1] https://github.com/Drewol/unnamed-sdvx-clone

a2031948

2021-07-28T14:06:51

Added in a MIME-type to the X11 clipboard. (#4385)

8e604a5f

2021-07-25T18:44:33

Fix error handling in X11_SetWindowTitle X11_XChangeProperty return 1 on success.

ff1b5e1b

2021-07-24T15:10:57

Implemented the window flash operations for X11

f1633127

2021-07-24T13:41:55

Added a window flash operation to be explicit about window flash behavior

e1c3a250

2021-07-24T12:11:27

Changed SDL_FlashWindow() so it doesn't take a flash count, and added the hint SDL_HINT_WINDOW_FLASH_COUNT to control behavior on Windows

16e3bfe8

2021-06-28T11:29:16

SetDisplayMode: Call XRRSetScreenSize before setting CRTC config X11_SetDisplayMode currently calls X11_XRRSetCrtcConfig alone. This results in the monitor's viewport getting changed, but the underlying screen dimensions stay the same. The spec indicates that RRSetCrtcConfig only changes the crtc mode and has no effect on the screen dimensions, only mentioning that the new crtc must fit entirely within the screen size. For the size to change, RRSetScreenSize also needs to be called. This affects Metro Exodus on Linux, when changing the resolution in the in-game settings Metro gets stuck in a loop waiting for the size of its vulkan surface to change. Because XRRSetScreenSize is not called the screen size is never changed, the vulkan surface dimensions do not change, and Metro hangs forever watching for a surface size update that will never come. This change disables the CRTC, calls XRRSetScreenSize, and then updates the CRTC configuration. This fixes changing the resolution from the Metro settings. Tested with: Metro Exodus, Portal 2

e65a6583

2021-06-09T22:10:20

x11: Add a hint to force override-redirect. Fixes #3776.

64724db0

2021-06-04T19:55:30

Implement bare minimum for SDL_FlashWindow

0dd7024d

2021-03-12T21:58:20

Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.

4522cb1d

2021-05-25T03:17:03

Changing variable from float to int, this way we can check it's value without having to do an unnecessary conversion. Then do explicit conversions later on if we need.

c289bad9

2021-03-22T11:22:31

In x11, GetDisplayDPI can give incorrect or unusable DPI information. Using XGetDefaults to get the Xft DPI if it's available and returning that. This could allow you to figure out DPI scale.

62a562de

2021-05-12T23:37:18

X11: use x11sym loaded functions (see bug #3978)

531d83bf

2021-05-12T23:13:48

X11: allow using touchscreen, while pointer is grabbed (see bug #3978)

c5dd9964

2021-04-07T12:14:16

Copied X11 error handler code from SDL_x11opengl.c Avoids needing to malloc to hold the error string.

b3b4677e

2021-04-07T11:17:52

(X11) Set _NET_WM_NAME properly, fixes Unicode window titles Removes deprecated code meant to support extremely ancient, pre-UTF-8 versions of Xorg. Uses new xlib API's for doing this same thing. Closes #4288.

1f482174

2021-04-25T12:44:35

x11: Mark backing_store as NotUseful when creating windows. This can give some performance boost, and save some resources, as there's no reason to keep a copy of an SDL window's contents on the server: most SDL apps are redrawing completely every frame, and the API allows for expose events to tell an app a redraw is needed anyhow. (And compositors are free to ignore this setting if it makes sense to do so, according to the Xlib docs.) Reference Issue #3776.

9c063468

2021-04-24T19:47:10

x11: call XSync before XSetInputFocus during SDL_ShowWindow. This only happens when using a non-NET_WM window manager, as we might try to set the focus before the window is mapped. Fixes #3949.

0838f53d

2021-04-21T11:41:08

Implement SDL_SetWindowAlwaysOnTop for X11

de6d2902

2021-04-19T21:48:11

Fix keymap updating for X11 backend

dbdbae44

2021-04-02T14:35:11

linux: (de)initialize d-bus at init and quit. Previously we had different subsystems quitting it, in conflict, and risked multiple threads racing to init it at the same time. Fixes #3643.

808249a5

2021-01-27T19:40:55

X11: Ungrab the keyboard when the mouse leaves the window GNOME Mutter requires keyboard grab for certain important functionality like window resizing, interaction with the application context menu, and opening the Activites view. To allow Mutter to grab the keyboard as needed, we'll ungrab when the mouse leaves our window. To be safe, we'll do this for all WMs since forks of Mutter and Matacity (and possibly others) may have the same behavior, and we don't want to have to keep track of those.

6b057c67

2021-01-26T19:16:17

Expose separate keyboard and mouse grab support This adds SDL_SetWindowKeyboardGrab(), SDL_GetWindowKeyboardGrab(), SDL_SetWindowMouseGrab(), SDL_GetWindowMouseGrab(), and new SDL_WINDOW_KEYBOARD_GRABBED flag. It also updates the test harness to exercise this functionality and makes a minor fix to X11 that I missed in https://hg.libsdl.org/SDL/rev/02a2d609369b To fit in with this new support, SDL_WINDOW_INPUT_CAPTURE has been renamed to SDL_WINDOW_MOUSE_CAPTURE with the old name remaining as an alias for backwards compatibility with older code.

a0d3c6c6

2021-01-25T21:42:14

Rename SetWindowGrab() to SetWindowMouseGrab()

kc3-lang/SDL/src/video/x11

src/video/x11

Log