kmx git

Commit	Date	Message
02f292eb	2019-01-09T22:49:49	Android: add some SetError for Android_SetWindowFullscreen First error could happen if Android_SetWindowFullscreen somehow gets called between SurfaceDestroyed() and SurfaceCreated() Second error should not happen has native_window validity is guaranteed. (It would happens previously with error -19)
1803944b	2019-01-09T15:18:41	Android: concurrency issue for Android_SetWindowFullscreen() It accesses data->native_window, which can be changed by onNativeSurfacedChanged(). Currently, Android_SetWindowFullscreen() may access data->native_window after it has been released, and before a new reference is acquired. (can be reproduced by adding some SDL_Delay() in onNativeSurfacedChanged and Android_SetWindowFullscreen() ).
462e62e1	2019-01-06T20:25:54	Android: better fix for bug 3186. Run those commands from SDL thread.
e4f558a5	2019-01-05T22:46:52	Android: un-needed check of "isPausing" and minor typos
35722b64	2019-01-05T22:27:25	Android: fix wrong state after immediate sequence pause() / resume() / pause() It may happen to have the sequence pause()/resume()/pause(), before polling any events. Before, it ends in 'resumed' state because as the check is greedy. Now, always increase the Pause semaphore, and stop at each pause. It ends in 'paused' state. Related to bug 3250: set up a reconfiguration of SurfaceView holder. Turn the screen off manually before the app starts (repro rate is not 100%..)
d4c0f498	2019-01-04T22:09:38	Fixed bug 4255 - SDL_GetGlobalMouseState() returns incorrect Y on secondary display Julian Raschke I use an open Mac laptop with an additional external monitor. The coordinate spaces from SDL_GetGlobalMouseState() and SDL_GetWindowPosition() match on the primary display, but not on the secondary display. Cocoa window coordinates are vertically flipped in relation to the primary display: https://github.com/spurious/SDL-mirror/blob/release-2.0.8/src/video/cocoa/SDL_cocoawindow.m#L219-L222 However, Cocoa_GetGlobalMouseState inverts the cursor Y coordinate per-display: https://github.com/spurious/SDL-mirror/blob/release-2.0.8/src/video/cocoa/SDL_cocoamouse.m#L320-L323 Suggested fix: Replace the for-loop with this simpler calculation: x = (int) cocoaLocation.x; y = (int) (CGDisplayPixelsHigh(kCGDirectMainDisplay) - cocoaLocation.y);
5e13087b	2019-01-04T22:01:14	Updated copyright for 2019
2a885eb0	2019-01-04T23:39:27	Android: fixed immediate transition to pause and resume. "Pause" transition will add events: SDL_WINDOWEVENT_ENTER SDL_WINDOWEVENT_FOCUS_LOST SDL_WINDOWEVENT_MINIMIZED SDL_APP_WILL ENTER BACKGROUND SDL_APP_DID ENTER BACKGROUND "Resume" transition will add events: SDL_APP_WILL ENTER FOREGROUND SDL_APP_DID ENTER FOREGROUND SDL_WINDOWEVENT_FOCUS_GAINED SDL_WINDOWEVENT_RESTORED If Android application doesn't empty the event loop in between, it enters in "paused" state when SDL_WINDOWEVENT_RESTORED is fetched. See bug 3250 for pratical case.
cf122344	2019-01-04T23:11:21	Android: make Android_PumpEvents() more readable No behavior change in this commit.
ca184ac3	2019-01-03T23:22:50	Android: concurrency issue with egl_surface EGL_BAD_SURFACE - (bug 4142) Occurs when application goes to background: - Java activity is destroying SurfaceView holder and "egl_surface" (in onNativeSurfaceDestroyed()) - While native thread is in Android_GLES_SwapWindow(), prepared to call SDL_EGL_SwapBuffers() The error is "call to eglSwapBuffers failed, reporting an error of EGL_BAD_SURFACE" It an be reproduced easily by adding a SDL_Delay(100) at the begining of SDL_EGL_SwapBuffers(), and putting the application into background.
2e19343d	2019-01-03T20:18:29	Android: use Mutex instead of Semphore for bug 4142
23478642	2019-01-03T16:22:33	Android: prevent the error message from SDL_EGL_CreateSurface() to be masked.
cc8f1136	2019-01-03T14:18:06	Fixed bug 4142 - Concurrency issues in Android backend Use a semaphore to prevent concurrency issues between Java Activity and Native thread code, when using 'Android_Window'. (Eg. Java sending Touch events, while native code is destroying the main SDL_Window. )
d11f7615	2019-01-03T13:38:33	Android: minor preparation for bug 4142 (concurrency issues)
5dc25fef	2019-01-03T13:14:16	Android: preparation bug 4142, reduce usage of global variable Android_Window
a95f91bc	2019-01-02T18:06:33	Fixed bug 3250 - Wrong backbuffer pixel format on Android, keep getting RGB_565 Use the egl format to reconfigure java SurfaceView holder format. If there is a change, it triggers a surfaceDestroyed/Created/Change sequence.
13869f19	2018-12-16T01:03:17	cocoa: Implement OpenGL swap interval support with CVDisplayLink. Not only does this fix macOS 10.14 ("Mojave")'s broken NSOpenGLCPSwapInterval support, it also lets us implement "adaptive vsync" on macOS! CVDisplayLink is supported back to macOS 10.4 ("Tiger"), so we just use it universally without version checks and dump NSOpenGLCPSwapInterval, Mojave or not.
1ed60219	2018-12-15T16:21:24	Fixed bug 4426 - allows re-creation of software renderer Switching between renderers "software -> opengl -> opengles2 -> software" fails. "opengl -> opengles2" calls SDL_RecreateWindow() and frees "window->surface" without marking it as "surface_invalid".
bd08d72d	2018-12-11T20:04:10	Fixed building with the 10.10 SDK
1c9595b1	2018-12-08T11:06:40	Fixed bug 4415 - SDL menu bar is nonstandard on Mac foo.null I'm on macOS 10.14 and I think I'm using or around SDL 2.0.9. This is about the menu bar that SDL sets up which looks like: <App Name> <Window> <View> 1. View menu never proceeds after the Window menu in any Mac application (it is always before). 2. For SDL, the only purpose of the View menu is for a single fullscreen menu item, which is not justifiable enough to reserve space for a menu. The View menu should thus be removed, and the full screen menu item should be added at the end inside of Window's menu. See built in apps like Dictionary, Chess, App Store (on 10.14) that do this. 3. SDL should add a "Close" menu item to the Window's submenu, and it should be the first item. Its key equivalent should map to command w. Without this, you cannot close the game window via this shortcut, and you cannot close the app's About window via this shortcut. 4. Apps typically use "Enter Full Screen" or "Exit Full Screen" depending on context, not "Toggle Full Screen" which is less user friendly -- I personally care about this point the least.
f9192ab8	2018-12-06T10:39:33	wayland: Do not try to lock on an invalid pointer This happens if you try to lock the pointer and (caps & WL_SEAT_CAPABILITY_POINTER) is false Leading to input->pointer being NULL which ends up bringing the wayland client down (at lease on weston)
252dc85e	2018-12-06T09:22:00	Fix warnings detected on Android build
2878d4f8	2018-12-05T16:53:15	egl: Don't force X11 support when testing for EGL. Fixes building Wayland support on embedded systems without X11. (TODO: maybe move the EGL test out of the X11 tests at some point, too.)
bd3ee07c	2018-12-05T16:49:38	wayland: Send SDL_TOUCH_MOUSEID mouse events for touches.
65a7c98c	2018-12-02T02:33:06	directfb: Updated render backend to new internal API. Totally untested, beyond it now compiles again. Probably needs some fixes. Fixes Bugzilla #4405.
583f61b2	2018-12-01T16:31:56	kmsdrm: Check for resources when validating KMSDRM device in check_modesetting. Fixes Bugzilla #4403.
b3ac87d5	2018-12-01T13:09:00	kmsdrm: uninitialized KMSDRM fixes * Search for valid encoder in connector when it doesn't have an encoder ID set. * Search for valid CRTC in resources and encoder's possible CRTCs when encoder doesn't have one set. * Select default mode if CRTC doesn't have a valid one. * Pick current_mode's W/H/Refresh Rate basing on current and valid CRTC mode, not the saved one.
c4bc59a5	2018-12-01T10:36:26	Patched to compile on Linux with --disable-threads. Fixes Bugzilla #4393.
a95291c9	2018-11-27T11:16:04	Fixed the hotspot for cursors on Raspberry Pi
aea48357	2018-11-27T10:20:29	Fixed bug changing cursors on Raspberry Pi
5c5ba0e3	2018-11-19T21:35:59	Fixed bug 4394 - Crash in SDL_PumpEvents() after SDL_DestroyWindow() Cameron Gutman After updating to SDL 2.0.9, I got a user report that my app was crashing when closing a SDL_WINDOW_FULLSCREEN window to return to my Qt-based UI. It looks like the dead SDL window is getting a spurious updateLayer call which is causing SDL to dereference a null SDL_WindowData pointer. For some reason, this only happens when using SDL_WINDOW_FULLSCREEN and not windowed or SDL_WINDOW_FULLSCREEN_DESKTOP. I was also unsuccessful in my attempt to get a simple reproducer for this crash. The Session.cpp code is available https://github.com/moonlight-stream/moonlight-qt/blob/688c4a90d994aa23e7b0af3ffcbb8707886db780/app/streaming/session.cpp but I slightly modified it (adding a SDL_PumpEvents() call at 1179 to immediately trigger the issue, otherwise it happened when Qt next pumped the event loop). The crashing line is: NSMutableArray *contexts = data->nscontexts;
c525ff35	2018-11-10T20:56:23	cocoa: fix building with the macOS 10.7 SDK (thanks Riccardo!) Fixes bug #4368
5029d50e	2018-11-10T16:15:48	Add SDL_TouchDeviceType enum and SDL_GetTouchDeviceType(SDL_TouchID id). Touch device types include SDL_TOUCH_DEVICE_DIRECT (a touch screen with window-relative coordinates for touches), SDL_TOUCH_DEVICE_INDIRECT_ABSOLUTE (a trackpad-style device with absolute device coordinates), and SDL_TOUCH_DEVICE_INDIRECT_RELATIVE (a trackpad-style device with screen cursor-relative coordinates). Phone screens are an example of a direct device type. Mac trackpads are the indirect-absolute touch device type. The Apple TV remote is an indirect-relative touch device type.
9665a508	2018-11-06T16:57:07	Added Vulkan headers version 1.1.91 Downloaded from https://github.com/KhronosGroup/Vulkan-Headers
48917e0e	2018-11-07T01:08:35	wayland: fix resizing and fullscreen toggling For starters, we need to correctly respond to 0,0 configure after unsetting fullscreen. Also, turns out that there should be no drawing calls at all in between eglSwapBuffers and wl_egl_window_resize, as otherwise EGL can already allocate a wrongly sized buffer for a next frame, so handle those together.
5f980514	2018-11-04T21:08:40	wayland: ask xdg-decoration protocol extension to use server-side decorations if possible.
bc57ac27	2018-11-02T21:34:17	mir: Removed mir client support. Fixes Bugzilla #4288.
4659e738	2018-11-01T12:31:45	merge fallout: Patched to compile, fixed some compiler warnings, etc.
aeee424f	2018-10-31T15:16:51	Fixed bug 4349 - SDL_CreateWindow fails with KMS/DRM after upgrading Mesa to 18.2.3 Rainer Sabelka After I did an upgrade of my arch Linux installation (resulting in an update of Mesa to version 18.2.3), all my SDL2 applications which use the KMS/DRM driver stopped working. Reason: Creating a Window with SDL_CreateWindow failed because the call to EGL eglCreateWindowSurface() returns an error "EGL_BAD_MATCH". After investigating with the debugger I figured, that the configuration, which has been selected from the output of eglChooseConfig(), has an "EGL_NATIVE_VISUAL_ID" which does not match the "format" of the underlying gbm surface. The attached patch fixes the problem. It does so, by mimicking Weston's behavior. All configurations returned from eglChooseConfig() which have an visual_id different from the gbm format are discarded, and only from the remaining ones the "best" match is selected.
62494a2e	2018-10-31T15:03:41	Merge SDL-ryan-batching-renderer branch to default.
a5ebd4d7	2018-10-29T10:14:59	wayland: ask KDE protocol extension to use server-side decorations if possible.
91820998	2018-10-28T21:36:48	Add and update include guards Include guards in most changed files were missing, I added them keeping the same style as other SDL files. In some cases I moved the include guards around to be the first thing the header has to take advantage of any possible improvements compiler may have for inclusion guards.
b262b0eb	2018-10-22T20:50:32	Small stack allocations fall back to malloc if they're unexpectedly large.
1ec56f73	2018-10-20T21:35:48	x11: Fixed incorrect function signature for XkbSetDetectableAutoRepeat. It needs to use Bool (which is an int) and not BOOL (which is CARD8), which causes problems on platforms with different byte order and alignment, etc. Fixes Bugzilla #4326.
1fb20f0a	2018-10-18T23:38:27	cocoa: Put a mutex around GL_SwapBuffers. Prevents deadlock when swapping two different GL contexts on two different threads at the same time on macOS 10.14 ("Mojave"). Fixes Bugzilla #4278.
cad0a2f7	2018-10-18T12:05:05	cocoa: Fix OpenGL rendering on macOS 10.14 ("Mojave"). Fixes Bugzilla #4272. (transplanted from 54729119b348e8a4a916192d1d6cb8d115656255)
f6773773	2018-10-18T12:05:05	cocoa: Fix OpenGL rendering on macOS 10.14 ("Mojave"). Fixes Bugzilla #4272.
072e17bf	2018-10-18T11:59:48	cocoa: GL_GetDrawableSize only uses -[NSView convertRectToBacking] for highDPI. On Mojave, this will report large numbers for retina displays in fullscreen mode, which isn't how it works on previous versions. (transplanted from c6c1731780e2bef94f944a4795e2dfbba46d9500)
eac3fd28	2018-10-18T11:59:48	cocoa: GL_GetDrawableSize only uses -[NSView convertRectToBacking] for highDPI. On Mojave, this will report large numbers for retina displays in fullscreen mode, which isn't how it works on previous versions.
dae4a013	2018-10-15T00:46:43	x11: Don't hardcode limit on lines of text in message boxes. Plus other text parsing fixes. Fixes Bugzilla #4306.
e2ad654f	2018-10-14T17:26:10	iOS: Don't ignore the requested alpha bit size when determining whether to use an RGBA8 backbuffer.
cd63709e	2018-10-13T17:18:59	Emscripten: Load eglQueryString and eglGetError This prevents an assertion on context creation failure (calling a null function pointer).
d8022d19	2018-10-12T23:23:52	macOS: Fixed MoltenVK dynamic library loading code.
d9094421	2018-10-12T17:55:42	metal: Fix high dpi and resizing on macOS, and clean up iOS code. Fixes bug #4250.
eff5f650	2018-10-09T23:01:43	Implement SuspendScreenSaver for Win32 Creating a full-screen SDL renderer on Windows will keep the screensaver suspended by DirectX, as is default for full-screen DX applications. However, for applications that render in windowed-mode, the screensaver will still kick in, even if SDL_DisableScreenSaver() is called or SDL_HINT_VIDEO_ALLOW_SCREENSAVER is set to 0 (default). Implementing a SuspendScreenSaver() function for Win32 fixes this behavior.
88b32525	2018-10-09T00:27:55	kmsdrm: find available card if called without index. This work was done by Michael Grzeschik, I just cleaned up the patch a little. Fixes Bugzilla #4241.
4d771c59	2018-10-08T12:49:25	Don't flash the navigation bar when destroying a fullscreen SDL window
3ac9e2aa	2018-10-05T17:06:05	Fixed bug 4296 - kmsdrm video driver leaks 1 bo in KMSDRM_GLES_SetupCrtc() Icenowy Zheng One front buffer is locked in GLES_SetupCrtc() and overrides the next_bo just locked in KMSDRM_GLES_SwapWindow, then the next_bo gets lost and is not released even when quitting the video. It may leads to problems with GLES drivers that doesn't clean up GBM correctly if there's any bo left (e.g. the Mali Utgard r6p2 blob). In the case of Mali Utgard r6p2 blob, the DRM device file is still hold by the blob, and if you try to SDL_Quit to let another program to run (this is done by EmulationStation), the new program will fail to open DRM device.
367f9b91	2018-10-05T17:24:03	wayland: Fixed missing window sizing events. Fixes Bugzilla #4242.
6e35e421	2018-10-01T14:43:03	Working on bug 3921 - Add some Fastpath to BlitNtoNKey and BlitNtoNKeyCopyAlpha Sylvain I did various benches. with clang 6.0.0 on linux, and ndk-r16b on android (NDK_TOOLCHAIN_VERSION=clang). - still see a x10 speed factor. - with duff_loops, it does not use vectorisation (but doesn't seem to be a problem). on linux my patch is already at full speed on -O2, whereas the duff_loops need -O3 (200 ms at -03, and 300ms at -02). I realized that on Android, I had a slight variation which fits best. both on linux with -O2 and -O3, and on android with 02/03 and armeabi-v7a/arm64. Here's the patch.
922623e1	2018-10-01T21:29:11	SDL_blit_N.c (BlitNtoNKeyCopyAlpha): fix -Wshadow warnings by adding _ suffix to the temp Pixel local in the DUFFS_LOOP. SDL_blit.h (ASSEMBLE_RGB): add _ prefix to temp Pixel locals to avoid any possible shadowings. The warnings were like the following: In file included from src/video/SDL_blit_N.c:26:0: src/video/SDL_blit_N.c: In function 'BlitNtoNKeyCopyAlpha': src/video/SDL_blit_N.c:2421:24: warning: declaration of 'Pixel' shadows a previous local [-Wshadow] Uint32 Pixel = ((src32 & rgbmask) == ckey) ? dst32 : src32; ^ src/video/SDL_blit.h:475:21: note: in definition of macro 'DUFFS_LOOP8' case 0: do { pixel_copy_increment; / fallthrough */ \ ^ src/video/SDL_blit_N.c:2419:13: note: in expansion of macro 'DUFFS_LOOP' DUFFS_LOOP( ^ src/video/SDL_blit_N.c:2399:12: warning: shadowed declaration is here [-Wshadow] Uint32 Pixel; ^
95579f5f	2018-10-01T09:40:58	Fixed bug 4220 - SDL_GL_CONTEXT_DEBUG_FLAG can fail silently on some Android devices
fb485986	2018-09-30T11:26:41	macOS: Fix a crash when the video subsystem quits, if SDL_MAC_NO_SANDBOX was defined when SDL was compiled.
74638ea3	2018-09-28T20:39:57	Ensure we wait on the surface resize before returning from setting fullscreen mode.
7df0f4fd	2018-09-27T14:56:29	Fixed bug 4277 - warnings patch Sylvain Patch a few warnings when using: -Wmissing-prototypes -Wdocumentation -Wdocumentation-unknown-command They are automatically enabled with -Wall
22475bf3	2018-09-26T20:10:32	cocoa: Force an OpenGL context update when the window becomes key. Fixes missing rendering on macOS 10.14 ("Mojave"). Fixes Bugzilla #4272. (transplanted from aee4797c84ef90464e270b1f6095a6dd7ce280c1)
7689162c	2018-09-26T20:10:32	cocoa: Force an OpenGL context update when the window becomes key. Fixes missing rendering on macOS 10.14 ("Mojave"). Fixes Bugzilla #4272.
55b24b93	2018-09-26T11:17:43	Fixed bug 4265 - SDL window falls to the bottom of the screen when dragged down and stuck there Alexei On WM_WINDOWPOSCHANGED event, WIN_UpdateClipCursor() is called. SDL_WINDOW_INPUT_FOCUS is set even when the mouse pointer is not inside the SDL window and therefore ClipCursor(&rect) is called. When dragging the window and rect.bottom=800 (i.e. the bottom edge of the screen) the SDL window is clipped to the bottom of the screen and it is not possible to move it back to the center of the screen.
ef347048	2018-09-24T16:41:55	Fixed bug 4264 - SDL_CreateTextureFromSurface generates error message but returns ok Anthony @ POW Games SDL_CreateTextureFromSurface makes an internal call to SDL_GetColorKey which can return an error and spams the error log with "Surface doesn't have a colorkey" even though the original function didn't return an error.
5febdfce	2018-09-24T11:49:25	Fixed whitespace
6b3e8931	2018-09-14T19:26:26	Added hints SDL_HINT_MOUSE_DOUBLE_CLICK_TIME and SDL_HINT_MOUSE_DOUBLE_CLICK_RADIUS to allow tuning double-click sensitivity. Also increased the default double-click radius to 32 pixels to be more forgiving for touch interfaces
0b3a350c	2018-09-10T23:01:33	Fixed Chinese IME support (thanks ???!)
af823cc1	2018-09-10T23:00:09	Fixed building on tvOS
404ba5ee	2018-08-28T13:37:11	Fixed bug 4229 - Add support for ABGR format in DirectFB renderer Alexandre DirectFB supports 32-bit ABGR pixel format via DSPF_ABGR, but SDL doesn't map SDL_PIXELFORMAT_ABGR8888 to DSPF_ABGR. A patch is attached and should add support for ABGR pixel format devices.
a1ca8441	2018-08-26T20:37:23	Update the cursor clipping each frame, in case it was stolen by another application.
15b3794f	2018-08-26T10:34:23	Only reset the clip rect if it's currently the rect we previously clipped. This prevents us from clearing the clip rect globally when another application has set it. There's also an experimental change to regularly update the clip rect for a window defensively, in case someone else has reset it. It works well, but I don't know if it's cheap enough to call as frequently as it would be called now, and might have other undesirable side effects. Also fixed whitespace and SDL coding style
a794126d	2018-08-24T09:49:48	vulkan: SDL_Vulkan_GetInstanceExtensions should accept a NULL window. Fixes Bugzilla #4235.
84e78320	2018-08-23T14:47:38	Fix "unresponsible application" issues in Wayland Polling without wl_display_flush() never responds to ping requests. In that case ping-pong works only on other events, such as user input or on frame swapped. From https://git.merproject.org/mer-core/libsdl/merge_requests/3 Original author: Alexander Akulich <a.akulich@omprussia.ru>
088070e5	2018-08-22T23:47:29	Moved display orientation handling on iOS out to a separate function for Qt apps
f225af0c	2018-08-22T21:48:28	Added SDL_GetDisplayOrientation() to get the display orientation, and added a new event SDL_DISPLAYEVENT to notify the application when the orientation changes. Documented the values returned by the accelerometer and gyroscope sensors
6f758ad2	2018-08-21T20:03:54	Moved SDL_IsTablet() to a cross-platform API function
109544ca	2018-08-21T11:23:47	Add SDL_IsTablet() to Android and iOS SDL.
aeea6b9b	2018-08-18T12:30:04	Emscripten: Fixed SDL_SYSTEM_CURSOR_SIZEALL
941c5b47	2018-08-07T18:07:11	haiku: Rename internal functions from BE_* to HAIKU_* Fixes Bugzilla #2349.
e061a92d	2018-08-02T16:03:47	Some drag'and'drop improvements. First: disable d'n'd events by default; most apps don't need these at all, and if an app doesn't explicitly handle these, each drop on the window will cause a memory leak if the events are enabled. This follows the guidelines we have for SDL_TEXTINPUT events already. Second: when events are enabled or disabled, signal the video layer, as it might be able to inform the OS, causing UI changes or optimizations (for example, dropping a file icon on a Cocoa app that isn't accepting drops will cause macOS to show a rejection animation instead of the drop operation just vanishing into the ether, X11 might show a different cursor when dragging onto an accepting window, etc). Third: fill in the drop event details in the test library and enable the events in testwm.c for making sure this all works as expected.
8f0cc4a4	2018-07-22T19:42:08	Backed out changeset 2e42ec46061e. This change isn't correct. See comments in Bugzilla #4183.
862aa4b4	2018-07-22T19:28:27	windows: Fixed some Visual Studio warnings about shadowed variables. Fixes Bugzilla #4118.
c3178e67	2018-07-12T16:52:45	Ensure we still clear the X locale modifiers even if not compiled with ibus or fcitx support
013b146d	2018-06-30T20:55:51	SDL_windowstaskdialog.h (struct _TASKDIALOGCONFIG): make unions anonymous otherwise build fails. (at least with my VS2005. and the code accesses the arms of the unions anonymously anyway.)
7c2028f8	2018-06-29T16:56:11	Attempt to fix "cast from pointer to integer of different size" warnings.
5a8ecf4e	2018-06-25T13:14:52	yuv: Patched to make static analysis happy (warned about unused variable).
c8ac9096	2018-06-24T22:42:36	wayland: Implemented xdg-wm-base support. This is just in parity with the existing zxdg-shell-unstable-v6 code. Making the Wayland target robust (and uh, with title bars) is going to take a lot of work on top of this.
59574fe2	2018-06-24T13:57:22	x11: Normalize x11xinput2 touch x to be 1.0 at width (thanks, Zach!). "Applications (such as SDL's testgesture) do "event.tfinger.x * window_width" to find window coord. Currently the X11 XInput2 backend expects application to do "event.tfinger.x * (window_width-1)" instead. X11 XInput2 touch events are normalized so x is 1.0 at "width - 1" but other SDL backends appear to have x be 1.0 at "width". Same issue for touch event y with regards to height." Fixes Bugzilla #4183.
88dfa466	2018-06-18T13:14:04	Use a blank cursor instead of PointerIcon.TYPE_NULL since that shows the default cursor on Samsung DeX
fe682827	2018-06-14T06:12:12	egl: Don't change context when deleting current. If we change the current context behind the app's back, those tracking the current context to minimize context changes are going to get confused. This brings the EGL backend in line with the GLX one. Fixes Bugzilla #4199.
4a4bac95	2018-06-12T13:22:58	Deal with fullscreen limitations under windowed Android environments (Chromebook, DeX, etc.) (Thanks Rachel!)
fe196db7	2018-06-07T17:07:03	Track android device panel width & height as well as window surface & height. Expand SDLActivity::SDLSurface::surfaceChanged() callback to grab the panel width and height at the same time and pass that along to the native code. Only works on API 17+. Duplicates surface dimensions whenever it fails. Add Android_DeviceWidth/Android_DeviceHeight globals to native code. Disambiguate Android_ScreenWidth/Android_ScreenHeight -> Android_SurfaceWidth/Android_SurfaceHeight Use device width/height for all display mode settings.
2dedbc72	2018-06-05T12:46:11	Add Android support for relative mouse mode to SDL.
9d6ac3de	2018-06-05T12:46:09	Fix creating a minimized window in SDL to not cause focus to be stolen (because ShowWindow( hwnd, SW_MINIMIZE ) would be called after creation, thus changing focus to the prior window based on some per-app list in windows, rather than the window being created with WS_MINIMIZED to start with). This means we have to consider SDL_WINDOW_MINIMIZED a window creation flag, but on non-windows platforms we just remove it and let the normal FinishWindowCreation re-apply and do the minimize as I have no idea what is right on them or if anything should change. CR: Phil
3d387098	2018-05-27T20:30:03	metal: contrary to documentation, we need to set the drawableSize explicitly. Fixes Bugzilla #4149.

02f292eb

2019-01-09T22:49:49

Android: add some SetError for Android_SetWindowFullscreen First error could happen if Android_SetWindowFullscreen somehow gets called between SurfaceDestroyed() and SurfaceCreated() Second error should not happen has native_window validity is guaranteed. (It would happens previously with error -19)

1803944b

2019-01-09T15:18:41

Android: concurrency issue for Android_SetWindowFullscreen() It accesses data->native_window, which can be changed by onNativeSurfacedChanged(). Currently, Android_SetWindowFullscreen() may access data->native_window after it has been released, and before a new reference is acquired. (can be reproduced by adding some SDL_Delay() in onNativeSurfacedChanged and Android_SetWindowFullscreen() ).

462e62e1

2019-01-06T20:25:54

Android: better fix for bug 3186. Run those commands from SDL thread.

e4f558a5

2019-01-05T22:46:52

Android: un-needed check of "isPausing" and minor typos

35722b64

2019-01-05T22:27:25

Android: fix wrong state after immediate sequence pause() / resume() / pause() It may happen to have the sequence pause()/resume()/pause(), before polling any events. Before, it ends in 'resumed' state because as the check is greedy. Now, always increase the Pause semaphore, and stop at each pause. It ends in 'paused' state. Related to bug 3250: set up a reconfiguration of SurfaceView holder. Turn the screen off manually before the app starts (repro rate is not 100%..)

d4c0f498

2019-01-04T22:09:38

Fixed bug 4255 - SDL_GetGlobalMouseState() returns incorrect Y on secondary display Julian Raschke I use an open Mac laptop with an additional external monitor. The coordinate spaces from SDL_GetGlobalMouseState() and SDL_GetWindowPosition() match on the primary display, but not on the secondary display. Cocoa window coordinates are vertically flipped in relation to the primary display: https://github.com/spurious/SDL-mirror/blob/release-2.0.8/src/video/cocoa/SDL_cocoawindow.m#L219-L222 However, Cocoa_GetGlobalMouseState inverts the cursor Y coordinate per-display: https://github.com/spurious/SDL-mirror/blob/release-2.0.8/src/video/cocoa/SDL_cocoamouse.m#L320-L323 Suggested fix: Replace the for-loop with this simpler calculation: *x = (int) cocoaLocation.x; *y = (int) (CGDisplayPixelsHigh(kCGDirectMainDisplay) - cocoaLocation.y);

5e13087b

2019-01-04T22:01:14

Updated copyright for 2019

2a885eb0

2019-01-04T23:39:27

Android: fixed immediate transition to pause and resume. "Pause" transition will add events: SDL_WINDOWEVENT_ENTER SDL_WINDOWEVENT_FOCUS_LOST SDL_WINDOWEVENT_MINIMIZED SDL_APP_WILL ENTER BACKGROUND SDL_APP_DID ENTER BACKGROUND "Resume" transition will add events: SDL_APP_WILL ENTER FOREGROUND SDL_APP_DID ENTER FOREGROUND SDL_WINDOWEVENT_FOCUS_GAINED SDL_WINDOWEVENT_RESTORED If Android application doesn't empty the event loop in between, it enters in "paused" state when SDL_WINDOWEVENT_RESTORED is fetched. See bug 3250 for pratical case.

cf122344

2019-01-04T23:11:21

Android: make Android_PumpEvents() more readable No behavior change in this commit.

ca184ac3

2019-01-03T23:22:50

Android: concurrency issue with egl_surface EGL_BAD_SURFACE - (bug 4142) Occurs when application goes to background: - Java activity is destroying SurfaceView holder and "egl_surface" (in onNativeSurfaceDestroyed()) - While native thread is in Android_GLES_SwapWindow(), prepared to call SDL_EGL_SwapBuffers() The error is "call to eglSwapBuffers failed, reporting an error of EGL_BAD_SURFACE" It an be reproduced easily by adding a SDL_Delay(100) at the begining of SDL_EGL_SwapBuffers(), and putting the application into background.

2e19343d

2019-01-03T20:18:29

Android: use Mutex instead of Semphore for bug 4142

23478642

2019-01-03T16:22:33

Android: prevent the error message from SDL_EGL_CreateSurface() to be masked.

cc8f1136

2019-01-03T14:18:06

Fixed bug 4142 - Concurrency issues in Android backend Use a semaphore to prevent concurrency issues between Java Activity and Native thread code, when using 'Android_Window'. (Eg. Java sending Touch events, while native code is destroying the main SDL_Window. )

d11f7615

2019-01-03T13:38:33

Android: minor preparation for bug 4142 (concurrency issues)

5dc25fef

2019-01-03T13:14:16

Android: preparation bug 4142, reduce usage of global variable Android_Window

a95f91bc

2019-01-02T18:06:33

Fixed bug 3250 - Wrong backbuffer pixel format on Android, keep getting RGB_565 Use the egl format to reconfigure java SurfaceView holder format. If there is a change, it triggers a surfaceDestroyed/Created/Change sequence.

13869f19

2018-12-16T01:03:17

cocoa: Implement OpenGL swap interval support with CVDisplayLink. Not only does this fix macOS 10.14 ("Mojave")'s broken NSOpenGLCPSwapInterval support, it also lets us implement "adaptive vsync" on macOS! CVDisplayLink is supported back to macOS 10.4 ("Tiger"), so we just use it universally without version checks and dump NSOpenGLCPSwapInterval, Mojave or not.

1ed60219

2018-12-15T16:21:24

Fixed bug 4426 - allows re-creation of software renderer Switching between renderers "software -> opengl -> opengles2 -> software" fails. "opengl -> opengles2" calls SDL_RecreateWindow() and frees "window->surface" without marking it as "surface_invalid".

bd08d72d

2018-12-11T20:04:10

Fixed building with the 10.10 SDK

1c9595b1

2018-12-08T11:06:40

Fixed bug 4415 - SDL menu bar is nonstandard on Mac foo.null I'm on macOS 10.14 and I think I'm using or around SDL 2.0.9. This is about the menu bar that SDL sets up which looks like: <App Name> <Window> <View> 1. View menu never proceeds after the Window menu in any Mac application (it is always before). 2. For SDL, the only purpose of the View menu is for a single fullscreen menu item, which is not justifiable enough to reserve space for a menu. The View menu should thus be removed, and the full screen menu item should be added at the end inside of Window's menu. See built in apps like Dictionary, Chess, App Store (on 10.14) that do this. 3. SDL should add a "Close" menu item to the Window's submenu, and it should be the first item. Its key equivalent should map to command w. Without this, you cannot close the game window via this shortcut, and you cannot close the app's About window via this shortcut. 4. Apps typically use "Enter Full Screen" or "Exit Full Screen" depending on context, not "Toggle Full Screen" which is less user friendly -- I personally care about this point the least.

f9192ab8

2018-12-06T10:39:33

wayland: Do not try to lock on an invalid pointer This happens if you try to lock the pointer and (caps & WL_SEAT_CAPABILITY_POINTER) is false Leading to input->pointer being NULL which ends up bringing the wayland client down (at lease on weston)

252dc85e

2018-12-06T09:22:00

Fix warnings detected on Android build

2878d4f8

2018-12-05T16:53:15

egl: Don't force X11 support when testing for EGL. Fixes building Wayland support on embedded systems without X11. (TODO: maybe move the EGL test out of the X11 tests at some point, too.)

bd3ee07c

2018-12-05T16:49:38

wayland: Send SDL_TOUCH_MOUSEID mouse events for touches.

65a7c98c

2018-12-02T02:33:06

directfb: Updated render backend to new internal API. Totally untested, beyond it now compiles again. Probably needs some fixes. Fixes Bugzilla #4405.

583f61b2

2018-12-01T16:31:56

kmsdrm: Check for resources when validating KMSDRM device in check_modesetting. Fixes Bugzilla #4403.

b3ac87d5

2018-12-01T13:09:00

kmsdrm: uninitialized KMSDRM fixes * Search for valid encoder in connector when it doesn't have an encoder ID set. * Search for valid CRTC in resources and encoder's possible CRTCs when encoder doesn't have one set. * Select default mode if CRTC doesn't have a valid one. * Pick current_mode's W/H/Refresh Rate basing on current and valid CRTC mode, not the saved one.

c4bc59a5

2018-12-01T10:36:26

Patched to compile on Linux with --disable-threads. Fixes Bugzilla #4393.

a95291c9

2018-11-27T11:16:04

Fixed the hotspot for cursors on Raspberry Pi

aea48357

2018-11-27T10:20:29

Fixed bug changing cursors on Raspberry Pi

5c5ba0e3

2018-11-19T21:35:59

Fixed bug 4394 - Crash in SDL_PumpEvents() after SDL_DestroyWindow() Cameron Gutman After updating to SDL 2.0.9, I got a user report that my app was crashing when closing a SDL_WINDOW_FULLSCREEN window to return to my Qt-based UI. It looks like the dead SDL window is getting a spurious updateLayer call which is causing SDL to dereference a null SDL_WindowData pointer. For some reason, this only happens when using SDL_WINDOW_FULLSCREEN and not windowed or SDL_WINDOW_FULLSCREEN_DESKTOP. I was also unsuccessful in my attempt to get a simple reproducer for this crash. The Session.cpp code is available https://github.com/moonlight-stream/moonlight-qt/blob/688c4a90d994aa23e7b0af3ffcbb8707886db780/app/streaming/session.cpp but I slightly modified it (adding a SDL_PumpEvents() call at 1179 to immediately trigger the issue, otherwise it happened when Qt next pumped the event loop). The crashing line is: NSMutableArray *contexts = data->nscontexts;

c525ff35

2018-11-10T20:56:23

cocoa: fix building with the macOS 10.7 SDK (thanks Riccardo!) Fixes bug #4368

5029d50e

2018-11-10T16:15:48

Add SDL_TouchDeviceType enum and SDL_GetTouchDeviceType(SDL_TouchID id). Touch device types include SDL_TOUCH_DEVICE_DIRECT (a touch screen with window-relative coordinates for touches), SDL_TOUCH_DEVICE_INDIRECT_ABSOLUTE (a trackpad-style device with absolute device coordinates), and SDL_TOUCH_DEVICE_INDIRECT_RELATIVE (a trackpad-style device with screen cursor-relative coordinates). Phone screens are an example of a direct device type. Mac trackpads are the indirect-absolute touch device type. The Apple TV remote is an indirect-relative touch device type.

9665a508

2018-11-06T16:57:07

Added Vulkan headers version 1.1.91 Downloaded from https://github.com/KhronosGroup/Vulkan-Headers

48917e0e

2018-11-07T01:08:35

wayland: fix resizing and fullscreen toggling For starters, we need to correctly respond to 0,0 configure after unsetting fullscreen. Also, turns out that there should be no drawing calls at all in between eglSwapBuffers and wl_egl_window_resize, as otherwise EGL can already allocate a wrongly sized buffer for a next frame, so handle those together.

5f980514

2018-11-04T21:08:40

wayland: ask xdg-decoration protocol extension to use server-side decorations if possible.

bc57ac27

2018-11-02T21:34:17

mir: Removed mir client support. Fixes Bugzilla #4288.

4659e738

2018-11-01T12:31:45

merge fallout: Patched to compile, fixed some compiler warnings, etc.

aeee424f

2018-10-31T15:16:51

Fixed bug 4349 - SDL_CreateWindow fails with KMS/DRM after upgrading Mesa to 18.2.3 Rainer Sabelka After I did an upgrade of my arch Linux installation (resulting in an update of Mesa to version 18.2.3), all my SDL2 applications which use the KMS/DRM driver stopped working. Reason: Creating a Window with SDL_CreateWindow failed because the call to EGL eglCreateWindowSurface() returns an error "EGL_BAD_MATCH". After investigating with the debugger I figured, that the configuration, which has been selected from the output of eglChooseConfig(), has an "EGL_NATIVE_VISUAL_ID" which does not match the "format" of the underlying gbm surface. The attached patch fixes the problem. It does so, by mimicking Weston's behavior. All configurations returned from eglChooseConfig() which have an visual_id different from the gbm format are discarded, and only from the remaining ones the "best" match is selected.

62494a2e

2018-10-31T15:03:41

Merge SDL-ryan-batching-renderer branch to default.

a5ebd4d7

2018-10-29T10:14:59

wayland: ask KDE protocol extension to use server-side decorations if possible.

91820998

2018-10-28T21:36:48

Add and update include guards Include guards in most changed files were missing, I added them keeping the same style as other SDL files. In some cases I moved the include guards around to be the first thing the header has to take advantage of any possible improvements compiler may have for inclusion guards.

b262b0eb

2018-10-22T20:50:32

Small stack allocations fall back to malloc if they're unexpectedly large.

1ec56f73

2018-10-20T21:35:48

x11: Fixed incorrect function signature for XkbSetDetectableAutoRepeat. It needs to use Bool (which is an int) and not BOOL (which is CARD8), which causes problems on platforms with different byte order and alignment, etc. Fixes Bugzilla #4326.

1fb20f0a

2018-10-18T23:38:27

cocoa: Put a mutex around GL_SwapBuffers. Prevents deadlock when swapping two different GL contexts on two different threads at the same time on macOS 10.14 ("Mojave"). Fixes Bugzilla #4278.

cad0a2f7

2018-10-18T12:05:05

cocoa: Fix OpenGL rendering on macOS 10.14 ("Mojave"). Fixes Bugzilla #4272. (transplanted from 54729119b348e8a4a916192d1d6cb8d115656255)

f6773773

2018-10-18T12:05:05

cocoa: Fix OpenGL rendering on macOS 10.14 ("Mojave"). Fixes Bugzilla #4272.

072e17bf

2018-10-18T11:59:48

cocoa: GL_GetDrawableSize only uses -[NSView convertRectToBacking] for highDPI. On Mojave, this will report large numbers for retina displays in fullscreen mode, which isn't how it works on previous versions. (transplanted from c6c1731780e2bef94f944a4795e2dfbba46d9500)

eac3fd28

2018-10-18T11:59:48

cocoa: GL_GetDrawableSize only uses -[NSView convertRectToBacking] for highDPI. On Mojave, this will report large numbers for retina displays in fullscreen mode, which isn't how it works on previous versions.

dae4a013

2018-10-15T00:46:43

x11: Don't hardcode limit on lines of text in message boxes. Plus other text parsing fixes. Fixes Bugzilla #4306.

e2ad654f

2018-10-14T17:26:10

iOS: Don't ignore the requested alpha bit size when determining whether to use an RGBA8 backbuffer.

cd63709e

2018-10-13T17:18:59

Emscripten: Load eglQueryString and eglGetError This prevents an assertion on context creation failure (calling a null function pointer).

d8022d19

2018-10-12T23:23:52

macOS: Fixed MoltenVK dynamic library loading code.

d9094421

2018-10-12T17:55:42

metal: Fix high dpi and resizing on macOS, and clean up iOS code. Fixes bug #4250.

eff5f650

2018-10-09T23:01:43

Implement SuspendScreenSaver for Win32 Creating a full-screen SDL renderer on Windows will keep the screensaver suspended by DirectX, as is default for full-screen DX applications. However, for applications that render in windowed-mode, the screensaver will still kick in, even if SDL_DisableScreenSaver() is called or SDL_HINT_VIDEO_ALLOW_SCREENSAVER is set to 0 (default). Implementing a SuspendScreenSaver() function for Win32 fixes this behavior.

88b32525

2018-10-09T00:27:55

kmsdrm: find available card if called without index. This work was done by Michael Grzeschik, I just cleaned up the patch a little. Fixes Bugzilla #4241.

4d771c59

2018-10-08T12:49:25

Don't flash the navigation bar when destroying a fullscreen SDL window

3ac9e2aa

2018-10-05T17:06:05

Fixed bug 4296 - kmsdrm video driver leaks 1 bo in KMSDRM_GLES_SetupCrtc() Icenowy Zheng One front buffer is locked in GLES_SetupCrtc() and overrides the next_bo just locked in KMSDRM_GLES_SwapWindow, then the next_bo gets lost and is not released even when quitting the video. It may leads to problems with GLES drivers that doesn't clean up GBM correctly if there's any bo left (e.g. the Mali Utgard r6p2 blob). In the case of Mali Utgard r6p2 blob, the DRM device file is still hold by the blob, and if you try to SDL_Quit to let another program to run (this is done by EmulationStation), the new program will fail to open DRM device.

367f9b91

2018-10-05T17:24:03

wayland: Fixed missing window sizing events. Fixes Bugzilla #4242.

6e35e421

2018-10-01T14:43:03

Working on bug 3921 - Add some Fastpath to BlitNtoNKey and BlitNtoNKeyCopyAlpha Sylvain I did various benches. with clang 6.0.0 on linux, and ndk-r16b on android (NDK_TOOLCHAIN_VERSION=clang). - still see a x10 speed factor. - with duff_loops, it does not use vectorisation (but doesn't seem to be a problem). on linux my patch is already at full speed on -O2, whereas the duff_loops need -O3 (200 ms at -03, and 300ms at -02). I realized that on Android, I had a slight variation which fits best. both on linux with -O2 and -O3, and on android with 02/03 and armeabi-v7a/arm64. Here's the patch.

922623e1

2018-10-01T21:29:11

SDL_blit_N.c (BlitNtoNKeyCopyAlpha): fix -Wshadow warnings by adding _ suffix to the temp Pixel local in the DUFFS_LOOP. SDL_blit.h (ASSEMBLE_RGB): add _ prefix to temp Pixel locals to avoid any possible shadowings. The warnings were like the following: In file included from src/video/SDL_blit_N.c:26:0: src/video/SDL_blit_N.c: In function 'BlitNtoNKeyCopyAlpha': src/video/SDL_blit_N.c:2421:24: warning: declaration of 'Pixel' shadows a previous local [-Wshadow] Uint32 Pixel = ((*src32 & rgbmask) == ckey) ? *dst32 : *src32; ^ src/video/SDL_blit.h:475:21: note: in definition of macro 'DUFFS_LOOP8' case 0: do { pixel_copy_increment; /* fallthrough */ \ ^ src/video/SDL_blit_N.c:2419:13: note: in expansion of macro 'DUFFS_LOOP' DUFFS_LOOP( ^ src/video/SDL_blit_N.c:2399:12: warning: shadowed declaration is here [-Wshadow] Uint32 Pixel; ^

95579f5f

2018-10-01T09:40:58

Fixed bug 4220 - SDL_GL_CONTEXT_DEBUG_FLAG can fail silently on some Android devices

fb485986

2018-09-30T11:26:41

macOS: Fix a crash when the video subsystem quits, if SDL_MAC_NO_SANDBOX was defined when SDL was compiled.

74638ea3

2018-09-28T20:39:57

Ensure we wait on the surface resize before returning from setting fullscreen mode.

7df0f4fd

2018-09-27T14:56:29

Fixed bug 4277 - warnings patch Sylvain Patch a few warnings when using: -Wmissing-prototypes -Wdocumentation -Wdocumentation-unknown-command They are automatically enabled with -Wall

22475bf3

2018-09-26T20:10:32

cocoa: Force an OpenGL context update when the window becomes key. Fixes missing rendering on macOS 10.14 ("Mojave"). Fixes Bugzilla #4272. (transplanted from aee4797c84ef90464e270b1f6095a6dd7ce280c1)

7689162c

2018-09-26T20:10:32

cocoa: Force an OpenGL context update when the window becomes key. Fixes missing rendering on macOS 10.14 ("Mojave"). Fixes Bugzilla #4272.

55b24b93

2018-09-26T11:17:43

Fixed bug 4265 - SDL window falls to the bottom of the screen when dragged down and stuck there Alexei On WM_WINDOWPOSCHANGED event, WIN_UpdateClipCursor() is called. SDL_WINDOW_INPUT_FOCUS is set even when the mouse pointer is not inside the SDL window and therefore ClipCursor(&rect) is called. When dragging the window and rect.bottom=800 (i.e. the bottom edge of the screen) the SDL window is clipped to the bottom of the screen and it is not possible to move it back to the center of the screen.

ef347048

2018-09-24T16:41:55

Fixed bug 4264 - SDL_CreateTextureFromSurface generates error message but returns ok Anthony @ POW Games SDL_CreateTextureFromSurface makes an internal call to SDL_GetColorKey which can return an error and spams the error log with "Surface doesn't have a colorkey" even though the original function didn't return an error.

5febdfce

2018-09-24T11:49:25

Fixed whitespace

6b3e8931

2018-09-14T19:26:26

Added hints SDL_HINT_MOUSE_DOUBLE_CLICK_TIME and SDL_HINT_MOUSE_DOUBLE_CLICK_RADIUS to allow tuning double-click sensitivity. Also increased the default double-click radius to 32 pixels to be more forgiving for touch interfaces

0b3a350c

2018-09-10T23:01:33

Fixed Chinese IME support (thanks ???!)

af823cc1

2018-09-10T23:00:09

Fixed building on tvOS

404ba5ee

2018-08-28T13:37:11

Fixed bug 4229 - Add support for ABGR format in DirectFB renderer Alexandre DirectFB supports 32-bit ABGR pixel format via DSPF_ABGR, but SDL doesn't map SDL_PIXELFORMAT_ABGR8888 to DSPF_ABGR. A patch is attached and should add support for ABGR pixel format devices.

a1ca8441

2018-08-26T20:37:23

Update the cursor clipping each frame, in case it was stolen by another application.

15b3794f

2018-08-26T10:34:23

Only reset the clip rect if it's currently the rect we previously clipped. This prevents us from clearing the clip rect globally when another application has set it. There's also an experimental change to regularly update the clip rect for a window defensively, in case someone else has reset it. It works well, but I don't know if it's cheap enough to call as frequently as it would be called now, and might have other undesirable side effects. Also fixed whitespace and SDL coding style

a794126d

2018-08-24T09:49:48

vulkan: SDL_Vulkan_GetInstanceExtensions should accept a NULL window. Fixes Bugzilla #4235.

84e78320

2018-08-23T14:47:38

Fix "unresponsible application" issues in Wayland Polling without wl_display_flush() never responds to ping requests. In that case ping-pong works only on other events, such as user input or on frame swapped. From https://git.merproject.org/mer-core/libsdl/merge_requests/3 Original author: Alexander Akulich <a.akulich@omprussia.ru>

088070e5

2018-08-22T23:47:29

Moved display orientation handling on iOS out to a separate function for Qt apps

f225af0c

2018-08-22T21:48:28

Added SDL_GetDisplayOrientation() to get the display orientation, and added a new event SDL_DISPLAYEVENT to notify the application when the orientation changes. Documented the values returned by the accelerometer and gyroscope sensors

6f758ad2

2018-08-21T20:03:54

Moved SDL_IsTablet() to a cross-platform API function

109544ca

2018-08-21T11:23:47

Add SDL_IsTablet() to Android and iOS SDL.

aeea6b9b

2018-08-18T12:30:04

Emscripten: Fixed SDL_SYSTEM_CURSOR_SIZEALL

941c5b47

2018-08-07T18:07:11

haiku: Rename internal functions from BE_* to HAIKU_* Fixes Bugzilla #2349.

e061a92d

2018-08-02T16:03:47

Some drag'and'drop improvements. First: disable d'n'd events by default; most apps don't need these at all, and if an app doesn't explicitly handle these, each drop on the window will cause a memory leak if the events are enabled. This follows the guidelines we have for SDL_TEXTINPUT events already. Second: when events are enabled or disabled, signal the video layer, as it might be able to inform the OS, causing UI changes or optimizations (for example, dropping a file icon on a Cocoa app that isn't accepting drops will cause macOS to show a rejection animation instead of the drop operation just vanishing into the ether, X11 might show a different cursor when dragging onto an accepting window, etc). Third: fill in the drop event details in the test library and enable the events in testwm.c for making sure this all works as expected.

8f0cc4a4

2018-07-22T19:42:08

Backed out changeset 2e42ec46061e. This change isn't correct. See comments in Bugzilla #4183.

862aa4b4

2018-07-22T19:28:27

windows: Fixed some Visual Studio warnings about shadowed variables. Fixes Bugzilla #4118.

c3178e67

2018-07-12T16:52:45

Ensure we still clear the X locale modifiers even if not compiled with ibus or fcitx support

013b146d

2018-06-30T20:55:51

SDL_windowstaskdialog.h (struct _TASKDIALOGCONFIG): make unions anonymous otherwise build fails. (at least with my VS2005. and the code accesses the arms of the unions anonymously anyway.)

7c2028f8

2018-06-29T16:56:11

Attempt to fix "cast from pointer to integer of different size" warnings.

5a8ecf4e

2018-06-25T13:14:52

yuv: Patched to make static analysis happy (warned about unused variable).

c8ac9096

2018-06-24T22:42:36

wayland: Implemented xdg-wm-base support. This is just in parity with the existing zxdg-shell-unstable-v6 code. Making the Wayland target robust (and uh, with title bars) is going to take a lot of work on top of this.

59574fe2

2018-06-24T13:57:22

x11: Normalize x11xinput2 touch x to be 1.0 at width (thanks, Zach!). "Applications (such as SDL's testgesture) do "event.tfinger.x * window_width" to find window coord. Currently the X11 XInput2 backend expects application to do "event.tfinger.x * (window_width-1)" instead. X11 XInput2 touch events are normalized so x is 1.0 at "width - 1" but other SDL backends appear to have x be 1.0 at "width". Same issue for touch event y with regards to height." Fixes Bugzilla #4183.

88dfa466

2018-06-18T13:14:04

Use a blank cursor instead of PointerIcon.TYPE_NULL since that shows the default cursor on Samsung DeX

fe682827

2018-06-14T06:12:12

egl: Don't change context when deleting current. If we change the current context behind the app's back, those tracking the current context to minimize context changes are going to get confused. This brings the EGL backend in line with the GLX one. Fixes Bugzilla #4199.

4a4bac95

2018-06-12T13:22:58

Deal with fullscreen limitations under windowed Android environments (Chromebook, DeX, etc.) (Thanks Rachel!)

fe196db7

2018-06-07T17:07:03

Track android device panel width & height as well as window surface & height. Expand SDLActivity::SDLSurface::surfaceChanged() callback to grab the panel width and height at the same time and pass that along to the native code. Only works on API 17+. Duplicates surface dimensions whenever it fails. Add Android_DeviceWidth/Android_DeviceHeight globals to native code. Disambiguate Android_ScreenWidth/Android_ScreenHeight -> Android_SurfaceWidth/Android_SurfaceHeight Use device width/height for all display mode settings.

2dedbc72

2018-06-05T12:46:11

Add Android support for relative mouse mode to SDL.

9d6ac3de

2018-06-05T12:46:09

Fix creating a minimized window in SDL to not cause focus to be stolen (because ShowWindow( hwnd, SW_MINIMIZE ) would be called after creation, thus changing focus to the prior window based on some per-app list in windows, rather than the window being created with WS_MINIMIZED to start with). This means we have to consider SDL_WINDOW_MINIMIZED a window creation flag, but on non-windows platforms we just remove it and let the normal FinishWindowCreation re-apply and do the minimize as I have no idea what is right on them or if anything should change. CR: Phil

3d387098

2018-05-27T20:30:03

metal: contrary to documentation, we need to set the drawableSize explicitly. Fixes Bugzilla #4149.

kc3-lang/SDL/src/video

src/video

Log