kmx git

Commit	Date	Message
754286c6	2020-12-02T13:45:24	SDL Renderer: specify the correct flag when recreating the window
0e4ce848	2020-11-08T20:57:17	opengl: Make diagonal lines match the software renderer. OpenGL leaves the final line segment open, SDL's software renderer does not, so we need a tiny bit of trigonometry here to move one more pixel in the right direction.
da49f795	2020-11-08T19:56:12	opengles: use glDrawArrays() correctly with GL_LINE_STRIP.
93a2c58c	2020-11-08T12:37:09	opengl: Use GL_LINE_STRIP instead of breaking down into seperate GL_LINES. Surely GL drivers have improved in the last seven years. I hope...?
731a5d1c	2020-11-08T03:18:05	metal: Fix line drawing, again.
ba36eb04	2020-10-21T00:03:33	metal: Make line drawing match software renderer. Partially fixes Bugzilla #2711.
c33f8083	2020-10-20T11:12:49	render: Restoring line rendering fixes that were previously put on hold. (Backed out hg changeset 7a4240daba46)
061256a3	2020-10-07T14:45:24	metal: Clear the framebuffer if presenting without any other operations.
a720d1a2	2020-08-09T00:55:39	render: fixes to how we convert touch events for logical scaling. We now handle HiDPI correctly, and touches are clamped to the viewport. So if you are rendering to a logical 640x480 in a 720p window, and touch the letterboxing at point (640,700), it will report the touch at (0.5,1.0) instead of outside the documented range.
b7a4fdd3	2020-07-17T11:16:35	metal: Make sure we have a command buffer available before trying to present. This fixes a case where you render to the backbuffer, then render to a render target, set the current target back to the backbuffer, and then present without drawing anything else; in this circumstance, the Present command would never happen. Fixes Bugzilla #5011.
15294e21	2020-05-26T13:54:47	Fixed iOS build
f16e6bfa	2020-05-25T14:10:51	Fixed creating a metal renderer without specifying a metal window
39690a04	2020-05-15T21:33:47	Fix static analysis warning in SDL_render.c
a96d8a43	2020-04-13T22:05:36	render: Fixed compiler warning about implicit cast.
aa188048	2020-04-10T12:23:08	render: Scale relative mouse motion better for logical sizing From hmk: "When scaling is enabled (e.g. via SDL_RenderSetLogicalSize, size not equal to window size), mouse motion events are also scaled. Small motions are rounded up (SDL_max() when the value after scaling is less than 1), while larger motions are truncated by the floating point -> integer conversion. https://hg.libsdl.org/SDL/file/b18197f9bf9d/src/render/SDL_render.c#l658 The end result feels something like mouse reverse mouse acceleration + angle snapping at low speeds, but less consistent (amount of truncation & rounding depends on how fast the mouse is moved) and potentially much worse if the scaling factor is large. This pretty much makes it useless for anything where you need precise mouse aiming (think of games). I suspect this is why aiming gets so terrible in some games that let you use scaling to reduce the render resolution (e.g. Ion Fury). With 4x4 scaling, I can reproduce a situation where it takes three fast flicks of the mouse across the pad to undo one slow sweep across the pad. In other words, extreme reverse acceleration. This does not happen when scaling is disabled. Furthermore, any game that uses relative mouse motion events for 3D camera rotation probably wants the raw mouse deltas and not a value that depends on scaling and resolution and rounding and truncation. Ideal camera rotation just takes mouse input, multiplies it by sensitivity, and adds it to the angle-in-radians or whatever measure is used for yaw & pitch. Pixels and screen resolution or window dimensions should not be a part of the equation at all, even if it could be implemented without rounding errors. [...] This [patch] completely eliminates angle snapping for me, and makes sensitivity consistent. In other words, it's completely usable for, say, aiming in a first person shooter." Partially fixes Bugzilla #4811.
b6afbe63	2020-04-07T09:38:57	Added SDL_log.h to SDL_internal.h so logging is available everywhere
d4b561f4	2020-04-05T08:58:47	Fixed bug 5015 - SDL_RenderReadPixels on DirectX 11.1 backend seems to be broken Konrad It appears that I cannot use SDL_RenderReadPixels on a bound framebuffer (SDL_Texture set as render target) as it simply results in gibberish data. However, drawing that framebuffer into the default target (window surface) does render it correctly. Other backends (OpenGL, software, Direct3D) do work fine. It looks to me like D3D11_RenderReadPixels just gets the general backbuffer and not the current render target and its backbuffer. Here is the patch which actually fetches the current render target and its underlying ID3D11Resource which is ID3D11Texture2D.
19a5f4ab	2020-03-22T14:32:47	opengl: Don't enable/disable texturing except when actually rendering. Otherwise our cached state goes out of sync when updating a texture. Since these state changes aren't necessary, they were removed instead of updating the cached state. Fixes Bugzilla #4998.
e6189f40	2020-03-17T15:47:30	Fix warnining implicit declaration of SDL_DetectPalette (Thanks meyraud705)
838bbf1f	2020-03-17T09:35:42	Fixed bug 5037 - Regression 2.0.12 Alpha value of 0 on palette may become opaque (see also bug 3827)
c8c05a9f	2020-03-08T19:23:21	Fixed bug 4991 - Pixel shader problem when recreating a texture for direct3d renderer cmediaplayer Hi, i already mentioned in the SDL discourse a bug that recreating of a texture occours pixel shader problem on direct3d renderer. There is no problem for direct3d11. You can see the issue by using my app named C Media Player which is available for Windows for free using my web site www.cmediaplayer.com. Just follow the steps: Open a media file When playing the file change the scale quality under the video menu. *You will see the problem.
367a3561	2020-03-08T18:56:07	Don't release the backbuffer on error, we didn't acquire it.
e152a3ce	2020-03-07T13:59:42	direct3d: Don't attempt to create zero sized vertex buffer
9a7c2b22	2020-02-23T09:59:52	Fixed bug 4999 - Palette surface always promoted to alpha (Thanks Cameron Gutman!) MSVC Static analysis: Incorrect alpha_value check in SDL_render.c (see also bug 4425)
93b26f17	2020-02-17T16:15:04	opengl: Backed out hg changeset 94f9f40a957f This is the OpenGL line drawing fix for Bugzilla #3182, but there's some disagreement about what the renderers should do here, so I'm backing this out until after 2.0.12 ships, and then we'll reevaluate all the renderer backends to decide what's correct, and make them all work the same.
6ec14b7f	2020-02-11T16:23:43	Fixed iOS and Android build
ed10d947	2020-02-10T12:53:54	opengl: Build out full GL_LINES and respect the diamond-exit rule. Likewise for the GLES1 and GLES2 renderers. This solves the missing pixel at the end of a line and removes all the heuristics for various platforms/drivers. It's possible we could still use GL_LINE_STRIP with this and save some vertex buffer space, assuming this doesn't upset some driver somewhere, but this seems to be a clean fix that makes the GL renderers match the software renderer output. Diamond-exit rule explanation: http://graphics-software-engineer.blogspot.com/2012/04/rasterization-rules.html Fixes Bugzilla #3182.
13155b35	2020-02-10T09:42:53	The scissor rect needs to be updated when the viewport changes in the Metal renderer
b5849daf	2020-02-01T09:23:04	Fixed build warnings on Android
b5e3d264	2020-01-23T01:00:52	Added a single SDL_LEAN_AND_MEAN define to turn on minimal SDL builds Protected more code with #ifdefs to reduce the size of minimal shared library builds
7df22cf2	2020-01-21T21:33:40	A few #defines to reduce SDL2 footprint. Only applied when library is statically linked
a8780c6a	2020-01-16T20:49:25	Updated copyright date for 2020
981e0d36	2020-01-16T08:52:59	Fixed bug 4903 - Lack of color multiply with alpha (SDL_BLENDMODE_MOD + SDL_BLENDMODE_BLEND) blending mode for all renderers Konrad This kind of blending is rather quite useful and in my opinion should be available for all renderers. I do need it myself, but since I didn't want to use a custom blending mode which is supported only by certain renderers (e.g. not in software which is quite important for me) I did write implementation of SDL_BLENDMODE_MUL for all renderers altogether. SDL_BLENDMODE_MUL implements following equation: dstRGB = (srcRGB * dstRGB) + (dstRGB * (1-srcA)) dstA = (srcA * dstA) + (dstA * (1-srcA)) Background: https://i.imgur.com/UsYhydP.png Blended texture: https://i.imgur.com/0juXQcV.png Result for SDL_BLENDMODE_MOD: https://i.imgur.com/wgNSgUl.png Result for SDL_BLENDMODE_MUL: https://i.imgur.com/Veokzim.png I think I did cover all possibilities within included patch, but I didn't write any tests for SDL_BLENDMODE_MUL, so it would be lovely if someone could do it.
ef3ca2cc	2019-12-23T19:55:10	Fix build error in SDL_render_metal.m (bug #4916.) Patch provided by Konrad. Error was introduced by commit 522164980828 for bug #4914.
6d639fce	2019-12-23T16:47:00	SDL_ScaleMode: fix compilation GLES renderer
131e13a7	2019-12-22T20:48:43	direct3d11: Always set vertex buffers when updating them (thanks, Konrad!). Fixes Bugzilla #4913.
5e19e66c	2019-12-22T13:39:44	Fixed bug 4914 - Expose SDL_ScaleMode and add SDL_SetTextureScaleMode/SDL_GetTextureScaleMode Konrad This was something rather trivial to add, but asked at least several times before (I did google about it as well). It should be possible to dynamically change scaling mode of the texture. It is actually trivial task, but until now it was only possible with a hint before creating a texture. I needed it for my game as well, so I took the liberty of writing it myself. This patch adds following functions: SDL_SetTextureScaleMode(SDL_Texture * texture, SDL_ScaleMode scaleMode); SDL_GetTextureScaleMode(SDL_Texture * texture, SDL_ScaleMode *scaleMode); That way you can change texture scaling on the fly.
7b08eb48	2019-12-03T03:07:34	direct3d11: Fixed incorrect texture coordinates (thanks, Martin!). Fixes Bugzilla #4860.
9e509e4a	2019-10-30T16:45:53	SDL_render_gles2: remove ineffective widening cast warning: either cast from 'int' to 'size_t' (aka 'unsigned long') is ineffective, or there is loss of precision before the conversion [bugprone-misplaced-widening-cast]
60d3965e	2019-10-30T15:36:17	Readability: remove redundant return, continue, enum declaration
a9b867ab	2019-10-26T14:39:50	macOS Fix potential memory leaks in the Metal renderer caught by clang's static analyzer.
1ce1364b	2019-10-26T12:56:18	d3d11: Don't fail if there's no vertex data to upload (thanks, Martin!). Fixes Bugzilla #4832.
216f5b98	2019-10-17T18:48:58	metal: Fix compilation when using older Apple SDKs (bug #4828).
fe20c35b	2019-10-14T16:40:46	Fixed race condition when scaling Touch events, and changing the renderer target. Always read the output size of the main renderer. (similar to bug 2107)
72660a51	2019-10-13T20:52:52	Fixed bug 4825 - SDL Renderer OpenGL: Buffer overflow (SDL_RENDERCMD_DRAW_LINES)
7d47f526	2019-10-01T09:26:30	SDL_LockTextureToSurface: robustness of locked region compared to texture size
0918903f	2019-09-30T22:54:16	render: add a hint for toggling relative scaling Fixes Bugzilla #4811.
1ae61f10	2019-09-30T20:58:44	Added a helper function SDL_LockTextureToSurface() Similar to SDL_LockTexture(), except the locked area is exposed as a SDL surface.
847bd8d9	2019-09-02T00:11:58	direct3d: Be more aggressive about resetting state when textures go away. Fixes Bugzilla #4768.
a3804ba1	2019-09-01T22:41:44	d3d11: Fixed VB state, avoiding unnecessary recreation (Thanks, Alex!). Fixes Bugzilla #4779.
0c263738	2019-08-26T18:49:04	gl/gles/gles2 render: fix SDL_RenderClear being affected by the clip rect in some situations.
bfdb0e97	2019-08-18T10:38:32	metal renderer: optimize SDL_RenderFillRect slightly.
ff7888e6	2019-08-18T09:35:11	render: fix colors not being set properly after the previous change
1be03b40	2019-08-17T22:26:33	render: avoid a couple redundant memcmp calls in all drawing functions. Improves performance slightly.
e8278d0d	2019-08-17T16:53:08	metal renderer: use vertex attributes instead of indexing into a buffer with the vertex id in the shader. Allows for more flexibility with vertex setup in the future. Also optimize vertex buffer binding slightly.
55a46abf	2019-08-17T01:09:30	metal renderer: more closely match buffer data alignment requirements from the metal specification.
69c6924c	2019-08-17T00:43:44	render: simplify vertex and uniform data allocation. Improves performance of various SDL_Render functions (bug #4764).
e5acccc7	2019-08-17T00:37:22	metal renderer: use the device address space instead of the constant address space for colors. It doesn't negatively impact GPU performance in my tests, and it removes the need for 256 byte memory alignment of color data on macOS.
3fb5cabe	2019-08-16T22:13:30	metal: Update compiled shaders based on compilation script changes
9e57e3e5	2019-08-16T22:11:50	metal: Update shader compilation script with fixes for newer xcode versions and for running on older platforms
aebaa316	2019-08-05T12:35:32	Add public APIs for creating a Metal view attached to an SDL window. Add SDL_metal.h.
22a2decf	2019-06-28T16:38:42	Android: concurrency issues, make sure Activity is in running State when calling functions like SDL_CreateWindow, SDL_CreateRenderer, Android_GLES_CreateContext Bugs 4694, 4681, 4142
cfed0b77	2019-06-28T16:14:50	Add an "error" label in SDL_CreateRenderer (no op)
31bb95f1	2019-06-21T15:07:39	direct3d: Use D3DPOOL_DEFAULT for vertex buffers after all, release correctly. Fixes Bugzilla #4679. Fixes Bugzilla #4537.
e681623c	2019-06-20T19:51:00	direct3d: Fix dirty textures failing to update Even if the texture itself has not changed since last time, the data may have so we must call UpdateDirtyTexture() to handle that possibility.
7162649f	2019-06-18T18:58:39	opengl: Be more robust in failing cases. Load all possible symbols, not just until one fails, in case they get used during shutdown, etc. Fixes Bugzilla #4093.
5dcac4cc	2019-06-18T10:08:19	Fixed 4669 - Using the software SDL_Renderer on Android leads to GL errors & black screen when window resizes Sylvain I think what happening with the software renderer is: * you're somehow in background (so texture creation is not possible) * it resizes and wants to push a SDL_WINDOWEVENT_SIZE_CHANGED It call: https://hg.libsdl.org/SDL/file/a010811d40dd/src/render/SDL_render.c#l683 * GetOutputSize * SW_GetOutputSize * SW_ActivateRenderer * SDL_GetWindowSurface * SDL_CreateWindowFramebuffer which is mapped to SDL_CreateWindowTexture and it ends up re-creating the surface/a texture, while being in background
e96d4760	2019-06-18T18:53:58	Android: resize with software rendering, reverted again (Bug 4669)
12b92260	2019-06-18T18:40:40	Android: try to fix resize with software rendering (bug 4669)
8a20d40d	2019-06-18T18:22:18	Android: revert commit SW_GetOutputSize, again (Bug 4669)
98cc7589	2019-06-18T10:41:11	Android: prevent using SW_GetOutputSize with software renderer (Bug 4669)
1213fe79	2019-06-14T13:56:42	Worked around "Undefined symbol: ___isPlatformVersionAtLeast()" link error on Xcode 11 beta
3e9bf284	2019-06-11T15:06:35	software: Fixed compiler warning and dos2unix'd the endlines.
04fedce0	2019-06-11T14:09:53	software: Correctly track viewport and cliprect. Fixes Bugzilla #4457.
a2f2b735	2019-06-11T13:02:56	direct3d: Use D3DPOOL_MANAGED for vertex buffers. Fixes Bugzilla #4537.
f7b7a972	2019-06-11T10:12:47	direct3d: Fixed SDL_RenderSetClipRect usage. Fixes Bugzilla #4459.
4f59d372	2019-06-11T09:29:48	direct3d: don't dereference bogus pointer if current texture was destroyed. Fixes Bugzilla #4460.
a6af0b82	2019-06-11T02:31:57	direct3d: Fixed more compiler warnings on Visual Studio 64-bit builds.
b5e9ebba	2019-06-08T19:12:05	Fixed compiler warning warning C4018: '<' : signed/unsigned mismatch
41c718db	2019-05-19T12:04:06	Fixed bug 4469 - make SDL_CreateTextureFromSurface pick a more appropriate format Sylvain Currently SDL_CreateTextureFromSurface picks first valid format, and do a conversion. format = renderer->info.texture_formats[0]; for (i = 0; i < renderer->info.num_texture_formats; ++i) { if (!SDL_ISPIXELFORMAT_FOURCC(renderer->info.texture_formats[i]) && SDL_ISPIXELFORMAT_ALPHA(renderer->info.texture_formats[i]) == needAlpha) { format = renderer->info.texture_formats[i]; break; It could try to find a better format, for instance : if SDL_Surface has no Amask, but a colorkey : if surface fmt is RGB888, try to pick ARGB8888 renderer fmt if surface fmt is BGR888, try to pick ABGR8888 renderer fmt else try to pick the same renderer format as surface fmt if no format has been picked, use the fallback. I think it goes with bug 4290 fastpath BlitNtoN when you expand a surface with pixel format of size 24 to 32, there is a fast path possible. So with this issue: - if you have a surface with colorkey (RGB or BGR, not palette), it takes a renderer format where the conversion is faster. (it avoids, if possible, RGB -> ABGR which means switching RGB to BGR) - if you have a surface ABGR format, it try to take the ABGR from the renderer. (it avoids, if possible, ABGR -> ARGB, which means switch RGB to BGR)
2ee9b1dd	2019-05-19T11:01:36	Fixed bug 4025 - SDL_Renderer OpenGL : add support for textures ABGR, RGB, BGR Sylvain OpenGLES2 SDL renderer has support for textures ARGB, ABGR, RGB and BGR, whereas OpenGL SDL renderer only had ARGB. If you think it's worth adding it, here's a patch. I quickly tried and it worked, but there may be missing things or corner case.
d68e501d	2019-04-08T13:43:48	Fixed bug 4582 - Maximize/Resize not working on Windows 10 When viewport is set, projectionAndView changes, but ID3D11DeviceContext_UpdateSubresource was not called.
8ab698af	2019-03-21T10:39:49	opengles2: Fix static analysis warning. Not clear if this could ever dereference NULL in real life, but better safe than sorry!
b2e76d86	2019-03-19T16:52:09	Fixed Windows RT build
b28e956b	2019-03-12T07:59:53	Fixed bug 4542 - Image flipped vertically when rendering on texture Have to recompute viewport because projection/glOrtho is different wether rendering is on target texture or not
40781dfb	2019-02-04T23:35:18	opengles2: patched to compile.
b7504f31	2019-02-04T23:32:28	opengles2: keep cached texturing state correct.
a609c03a	2019-02-04T23:24:10	opengles1: keep cached texturing state correct.
40a52cee	2019-02-04T18:55:39	render: Fix OpenGL draw state cache for various points of texture binding.
07548602	2019-01-19T16:47:43	Fixed bug 3657 - Color-key doesn't work when an alpha channel is present When surface format is the same as renderer format, it still needs an intermediate conversion to transform colorkey to alpha.
be991f3a	2019-01-12T13:34:03	Fixed bug 4453 - GLES / GLES2: first white renderer clear cmd is drawn as black
5e13087b	2019-01-04T22:01:14	Updated copyright for 2019
9cdd0dd9	2018-12-29T17:59:34	PSP renderer: use colors from 'draw' union (very likely, but un-tested)
ebd9efb3	2018-12-29T16:37:44	opengles 1: same fix as in bug #4433
87b76369	2018-12-29T16:34:50	opengles 1: use color from 'draw' union in SetDrawState()
dc344360	2018-12-21T20:53:31	render: Fix internal state getting out of sync when destroying a texture that was just rendered and then creating a new one, in the GL and GLES2 backends. Fixes bug #4433.
0a705901	2018-12-19T18:10:02	render: Prefer the Metal renderer over OpenGL. This is the best option for macOS and iOS, the only platforms with Metal. Pre-Metal versions of these platforms will fall back to OpenGL (ES), as appropriate. Huge thanks to Alexander Szpakowski, who worked incredibly hard to get the Metal renderer to such a high-quality state!
c7db6ade	2018-12-19T18:27:21	metal: Implement SDL_LockTexture for YUV formats.
ce8c716a	2018-12-18T14:23:05	metal: Implement SDL_LockTexture for non-YUV textures.
e5476c65	2018-12-15T14:50:12	Fixed bug 4425 - promote to alpha format, palette surface with alpha values. SDL_CreateTextureFromSurface() forgets to choose a texture format with alpha for surfaces that have palettes with alpha values.

754286c6

2020-12-02T13:45:24

SDL Renderer: specify the correct flag when recreating the window

0e4ce848

2020-11-08T20:57:17

opengl: Make diagonal lines match the software renderer. OpenGL leaves the final line segment open, SDL's software renderer does not, so we need a tiny bit of trigonometry here to move one more pixel in the right direction.

da49f795

2020-11-08T19:56:12

opengles: use glDrawArrays() correctly with GL_LINE_STRIP.

93a2c58c

2020-11-08T12:37:09

opengl: Use GL_LINE_STRIP instead of breaking down into seperate GL_LINES. Surely GL drivers have improved in the last seven years. I hope...?

731a5d1c

2020-11-08T03:18:05

metal: Fix line drawing, again.

ba36eb04

2020-10-21T00:03:33

metal: Make line drawing match software renderer. Partially fixes Bugzilla #2711.

c33f8083

2020-10-20T11:12:49

render: Restoring line rendering fixes that were previously put on hold. (Backed out hg changeset 7a4240daba46)

061256a3

2020-10-07T14:45:24

metal: Clear the framebuffer if presenting without any other operations.

a720d1a2

2020-08-09T00:55:39

render: fixes to how we convert touch events for logical scaling. We now handle HiDPI correctly, and touches are clamped to the viewport. So if you are rendering to a logical 640x480 in a 720p window, and touch the letterboxing at point (640,700), it will report the touch at (0.5,1.0) instead of outside the documented range.

b7a4fdd3

2020-07-17T11:16:35

metal: Make sure we have a command buffer available before trying to present. This fixes a case where you render to the backbuffer, then render to a render target, set the current target back to the backbuffer, and then present without drawing anything else; in this circumstance, the Present command would never happen. Fixes Bugzilla #5011.

15294e21

2020-05-26T13:54:47

Fixed iOS build

f16e6bfa

2020-05-25T14:10:51

Fixed creating a metal renderer without specifying a metal window

39690a04

2020-05-15T21:33:47

Fix static analysis warning in SDL_render.c

a96d8a43

2020-04-13T22:05:36

render: Fixed compiler warning about implicit cast.

aa188048

2020-04-10T12:23:08

render: Scale relative mouse motion better for logical sizing From hmk: "When scaling is enabled (e.g. via SDL_RenderSetLogicalSize, size not equal to window size), mouse motion events are also scaled. Small motions are rounded up (SDL_max() when the value after scaling is less than 1), while larger motions are truncated by the floating point -> integer conversion. https://hg.libsdl.org/SDL/file/b18197f9bf9d/src/render/SDL_render.c#l658 The end result feels something like mouse reverse mouse acceleration + angle snapping at low speeds, but less consistent (amount of truncation & rounding depends on how fast the mouse is moved) and potentially much worse if the scaling factor is large. This pretty much makes it useless for anything where you need precise mouse aiming (think of games). I suspect this is why aiming gets so terrible in some games that let you use scaling to reduce the render resolution (e.g. Ion Fury). With 4x4 scaling, I can reproduce a situation where it takes three fast flicks of the mouse across the pad to undo one slow sweep across the pad. In other words, extreme reverse acceleration. This does not happen when scaling is disabled. Furthermore, any game that uses relative mouse motion events for 3D camera rotation probably wants the raw mouse deltas and not a value that depends on scaling and resolution and rounding and truncation. Ideal camera rotation just takes mouse input, multiplies it by sensitivity, and adds it to the angle-in-radians or whatever measure is used for yaw & pitch. Pixels and screen resolution or window dimensions should not be a part of the equation at all, even if it could be implemented without rounding errors. [...] This [patch] completely eliminates angle snapping for me, and makes sensitivity consistent. In other words, it's completely usable for, say, aiming in a first person shooter." Partially fixes Bugzilla #4811.

b6afbe63

2020-04-07T09:38:57

Added SDL_log.h to SDL_internal.h so logging is available everywhere

d4b561f4

2020-04-05T08:58:47

Fixed bug 5015 - SDL_RenderReadPixels on DirectX 11.1 backend seems to be broken Konrad It appears that I cannot use SDL_RenderReadPixels on a bound framebuffer (SDL_Texture set as render target) as it simply results in gibberish data. However, drawing that framebuffer into the default target (window surface) does render it correctly. Other backends (OpenGL, software, Direct3D) do work fine. It looks to me like D3D11_RenderReadPixels just gets the general backbuffer and not the current render target and its backbuffer. Here is the patch which actually fetches the current render target and its underlying ID3D11Resource which is ID3D11Texture2D.

19a5f4ab

2020-03-22T14:32:47

opengl: Don't enable/disable texturing except when actually rendering. Otherwise our cached state goes out of sync when updating a texture. Since these state changes aren't necessary, they were removed instead of updating the cached state. Fixes Bugzilla #4998.

e6189f40

2020-03-17T15:47:30

Fix warnining implicit declaration of SDL_DetectPalette (Thanks meyraud705)

838bbf1f

2020-03-17T09:35:42

Fixed bug 5037 - Regression 2.0.12 Alpha value of 0 on palette may become opaque (see also bug 3827)

c8c05a9f

2020-03-08T19:23:21

Fixed bug 4991 - Pixel shader problem when recreating a texture for direct3d renderer cmediaplayer Hi, i already mentioned in the SDL discourse a bug that recreating of a texture occours pixel shader problem on direct3d renderer. There is no problem for direct3d11. You can see the issue by using my app named C Media Player which is available for Windows for free using my web site www.cmediaplayer.com. Just follow the steps: *Open a media file *When playing the file change the scale quality under the video menu. *You will see the problem.

367a3561

2020-03-08T18:56:07

Don't release the backbuffer on error, we didn't acquire it.

e152a3ce

2020-03-07T13:59:42

direct3d: Don't attempt to create zero sized vertex buffer

9a7c2b22

2020-02-23T09:59:52

Fixed bug 4999 - Palette surface always promoted to alpha (Thanks Cameron Gutman!) MSVC Static analysis: Incorrect alpha_value check in SDL_render.c (see also bug 4425)

93b26f17

2020-02-17T16:15:04

opengl: Backed out hg changeset 94f9f40a957f This is the OpenGL line drawing fix for Bugzilla #3182, but there's some disagreement about what the renderers should do here, so I'm backing this out until after 2.0.12 ships, and then we'll reevaluate all the renderer backends to decide what's correct, and make them all work the same.

6ec14b7f

2020-02-11T16:23:43

Fixed iOS and Android build

ed10d947

2020-02-10T12:53:54

opengl: Build out full GL_LINES and respect the diamond-exit rule. Likewise for the GLES1 and GLES2 renderers. This solves the missing pixel at the end of a line and removes all the heuristics for various platforms/drivers. It's possible we could still use GL_LINE_STRIP with this and save some vertex buffer space, assuming this doesn't upset some driver somewhere, but this seems to be a clean fix that makes the GL renderers match the software renderer output. Diamond-exit rule explanation: http://graphics-software-engineer.blogspot.com/2012/04/rasterization-rules.html Fixes Bugzilla #3182.

13155b35

2020-02-10T09:42:53

The scissor rect needs to be updated when the viewport changes in the Metal renderer

b5849daf

2020-02-01T09:23:04

Fixed build warnings on Android

b5e3d264

2020-01-23T01:00:52

Added a single SDL_LEAN_AND_MEAN define to turn on minimal SDL builds Protected more code with #ifdefs to reduce the size of minimal shared library builds

7df22cf2

2020-01-21T21:33:40

A few #defines to reduce SDL2 footprint. Only applied when library is statically linked

a8780c6a

2020-01-16T20:49:25

Updated copyright date for 2020

981e0d36

2020-01-16T08:52:59

Fixed bug 4903 - Lack of color multiply with alpha (SDL_BLENDMODE_MOD + SDL_BLENDMODE_BLEND) blending mode for all renderers Konrad This kind of blending is rather quite useful and in my opinion should be available for all renderers. I do need it myself, but since I didn't want to use a custom blending mode which is supported only by certain renderers (e.g. not in software which is quite important for me) I did write implementation of SDL_BLENDMODE_MUL for all renderers altogether. SDL_BLENDMODE_MUL implements following equation: dstRGB = (srcRGB * dstRGB) + (dstRGB * (1-srcA)) dstA = (srcA * dstA) + (dstA * (1-srcA)) Background: https://i.imgur.com/UsYhydP.png Blended texture: https://i.imgur.com/0juXQcV.png Result for SDL_BLENDMODE_MOD: https://i.imgur.com/wgNSgUl.png Result for SDL_BLENDMODE_MUL: https://i.imgur.com/Veokzim.png I think I did cover all possibilities within included patch, but I didn't write any tests for SDL_BLENDMODE_MUL, so it would be lovely if someone could do it.

ef3ca2cc

2019-12-23T19:55:10

Fix build error in SDL_render_metal.m (bug #4916.) Patch provided by Konrad. Error was introduced by commit 522164980828 for bug #4914.

6d639fce

2019-12-23T16:47:00

SDL_ScaleMode: fix compilation GLES renderer

131e13a7

2019-12-22T20:48:43

direct3d11: Always set vertex buffers when updating them (thanks, Konrad!). Fixes Bugzilla #4913.

5e19e66c

2019-12-22T13:39:44

Fixed bug 4914 - Expose SDL_ScaleMode and add SDL_SetTextureScaleMode/SDL_GetTextureScaleMode Konrad This was something rather trivial to add, but asked at least several times before (I did google about it as well). It should be possible to dynamically change scaling mode of the texture. It is actually trivial task, but until now it was only possible with a hint before creating a texture. I needed it for my game as well, so I took the liberty of writing it myself. This patch adds following functions: SDL_SetTextureScaleMode(SDL_Texture * texture, SDL_ScaleMode scaleMode); SDL_GetTextureScaleMode(SDL_Texture * texture, SDL_ScaleMode *scaleMode); That way you can change texture scaling on the fly.

7b08eb48

2019-12-03T03:07:34

direct3d11: Fixed incorrect texture coordinates (thanks, Martin!). Fixes Bugzilla #4860.

9e509e4a

2019-10-30T16:45:53

SDL_render_gles2: remove ineffective widening cast warning: either cast from 'int' to 'size_t' (aka 'unsigned long') is ineffective, or there is loss of precision before the conversion [bugprone-misplaced-widening-cast]

60d3965e

2019-10-30T15:36:17

Readability: remove redundant return, continue, enum declaration

a9b867ab

2019-10-26T14:39:50

macOS Fix potential memory leaks in the Metal renderer caught by clang's static analyzer.

1ce1364b

2019-10-26T12:56:18

d3d11: Don't fail if there's no vertex data to upload (thanks, Martin!). Fixes Bugzilla #4832.

216f5b98

2019-10-17T18:48:58

metal: Fix compilation when using older Apple SDKs (bug #4828).

fe20c35b

2019-10-14T16:40:46

Fixed race condition when scaling Touch events, and changing the renderer target. Always read the output size of the main renderer. (similar to bug 2107)

72660a51

2019-10-13T20:52:52

Fixed bug 4825 - SDL Renderer OpenGL: Buffer overflow (SDL_RENDERCMD_DRAW_LINES)

7d47f526

2019-10-01T09:26:30

SDL_LockTextureToSurface: robustness of locked region compared to texture size

0918903f

2019-09-30T22:54:16

render: add a hint for toggling relative scaling Fixes Bugzilla #4811.

1ae61f10

2019-09-30T20:58:44

Added a helper function SDL_LockTextureToSurface() Similar to SDL_LockTexture(), except the locked area is exposed as a SDL surface.

847bd8d9

2019-09-02T00:11:58

direct3d: Be more aggressive about resetting state when textures go away. Fixes Bugzilla #4768.

a3804ba1

2019-09-01T22:41:44

d3d11: Fixed VB state, avoiding unnecessary recreation (Thanks, Alex!). Fixes Bugzilla #4779.

0c263738

2019-08-26T18:49:04

gl/gles/gles2 render: fix SDL_RenderClear being affected by the clip rect in some situations.

bfdb0e97

2019-08-18T10:38:32

metal renderer: optimize SDL_RenderFillRect slightly.

ff7888e6

2019-08-18T09:35:11

render: fix colors not being set properly after the previous change

1be03b40

2019-08-17T22:26:33

render: avoid a couple redundant memcmp calls in all drawing functions. Improves performance slightly.

e8278d0d

2019-08-17T16:53:08

metal renderer: use vertex attributes instead of indexing into a buffer with the vertex id in the shader. Allows for more flexibility with vertex setup in the future. Also optimize vertex buffer binding slightly.

55a46abf

2019-08-17T01:09:30

metal renderer: more closely match buffer data alignment requirements from the metal specification.

69c6924c

2019-08-17T00:43:44

render: simplify vertex and uniform data allocation. Improves performance of various SDL_Render functions (bug #4764).

e5acccc7

2019-08-17T00:37:22

metal renderer: use the device address space instead of the constant address space for colors. It doesn't negatively impact GPU performance in my tests, and it removes the need for 256 byte memory alignment of color data on macOS.

3fb5cabe

2019-08-16T22:13:30

metal: Update compiled shaders based on compilation script changes

9e57e3e5

2019-08-16T22:11:50

metal: Update shader compilation script with fixes for newer xcode versions and for running on older platforms

aebaa316

2019-08-05T12:35:32

Add public APIs for creating a Metal view attached to an SDL window. Add SDL_metal.h.

22a2decf

2019-06-28T16:38:42

Android: concurrency issues, make sure Activity is in running State when calling functions like SDL_CreateWindow, SDL_CreateRenderer, Android_GLES_CreateContext Bugs 4694, 4681, 4142

cfed0b77

2019-06-28T16:14:50

Add an "error" label in SDL_CreateRenderer (no op)

31bb95f1

2019-06-21T15:07:39

direct3d: Use D3DPOOL_DEFAULT for vertex buffers after all, release correctly. Fixes Bugzilla #4679. Fixes Bugzilla #4537.

e681623c

2019-06-20T19:51:00

direct3d: Fix dirty textures failing to update Even if the texture itself has not changed since last time, the data may have so we must call UpdateDirtyTexture() to handle that possibility.

7162649f

2019-06-18T18:58:39

opengl: Be more robust in failing cases. Load all possible symbols, not just until one fails, in case they get used during shutdown, etc. Fixes Bugzilla #4093.

5dcac4cc

2019-06-18T10:08:19

Fixed 4669 - Using the software SDL_Renderer on Android leads to GL errors & black screen when window resizes Sylvain I think what happening with the software renderer is: * you're somehow in background (so texture creation is not possible) * it resizes and wants to push a SDL_WINDOWEVENT_SIZE_CHANGED It call: https://hg.libsdl.org/SDL/file/a010811d40dd/src/render/SDL_render.c#l683 * GetOutputSize * SW_GetOutputSize * SW_ActivateRenderer * SDL_GetWindowSurface * SDL_CreateWindowFramebuffer which is mapped to SDL_CreateWindowTexture and it ends up re-creating the surface/a texture, while being in background

e96d4760

2019-06-18T18:53:58

Android: resize with software rendering, reverted again (Bug 4669)

12b92260

2019-06-18T18:40:40

Android: try to fix resize with software rendering (bug 4669)

8a20d40d

2019-06-18T18:22:18

Android: revert commit SW_GetOutputSize, again (Bug 4669)

98cc7589

2019-06-18T10:41:11

Android: prevent using SW_GetOutputSize with software renderer (Bug 4669)

1213fe79

2019-06-14T13:56:42

Worked around "Undefined symbol: ___isPlatformVersionAtLeast()" link error on Xcode 11 beta

3e9bf284

2019-06-11T15:06:35

software: Fixed compiler warning and dos2unix'd the endlines.

04fedce0

2019-06-11T14:09:53

software: Correctly track viewport and cliprect. Fixes Bugzilla #4457.

a2f2b735

2019-06-11T13:02:56

direct3d: Use D3DPOOL_MANAGED for vertex buffers. Fixes Bugzilla #4537.

f7b7a972

2019-06-11T10:12:47

direct3d: Fixed SDL_RenderSetClipRect usage. Fixes Bugzilla #4459.

4f59d372

2019-06-11T09:29:48

direct3d: don't dereference bogus pointer if current texture was destroyed. Fixes Bugzilla #4460.

a6af0b82

2019-06-11T02:31:57

direct3d: Fixed more compiler warnings on Visual Studio 64-bit builds.

b5e9ebba

2019-06-08T19:12:05

Fixed compiler warning warning C4018: '<' : signed/unsigned mismatch

41c718db

2019-05-19T12:04:06

Fixed bug 4469 - make SDL_CreateTextureFromSurface pick a more appropriate format Sylvain Currently SDL_CreateTextureFromSurface picks first valid format, and do a conversion. format = renderer->info.texture_formats[0]; for (i = 0; i < renderer->info.num_texture_formats; ++i) { if (!SDL_ISPIXELFORMAT_FOURCC(renderer->info.texture_formats[i]) && SDL_ISPIXELFORMAT_ALPHA(renderer->info.texture_formats[i]) == needAlpha) { format = renderer->info.texture_formats[i]; break; It could try to find a better format, for instance : if SDL_Surface has no Amask, but a colorkey : if surface fmt is RGB888, try to pick ARGB8888 renderer fmt if surface fmt is BGR888, try to pick ABGR8888 renderer fmt else try to pick the same renderer format as surface fmt if no format has been picked, use the fallback. I think it goes with bug 4290 fastpath BlitNtoN when you expand a surface with pixel format of size 24 to 32, there is a fast path possible. So with this issue: - if you have a surface with colorkey (RGB or BGR, not palette), it takes a renderer format where the conversion is faster. (it avoids, if possible, RGB -> ABGR which means switching RGB to BGR) - if you have a surface ABGR format, it try to take the ABGR from the renderer. (it avoids, if possible, ABGR -> ARGB, which means switch RGB to BGR)

2ee9b1dd

2019-05-19T11:01:36

Fixed bug 4025 - SDL_Renderer OpenGL : add support for textures ABGR, RGB, BGR Sylvain OpenGLES2 SDL renderer has support for textures ARGB, ABGR, RGB and BGR, whereas OpenGL SDL renderer only had ARGB. If you think it's worth adding it, here's a patch. I quickly tried and it worked, but there may be missing things or corner case.

d68e501d

2019-04-08T13:43:48

Fixed bug 4582 - Maximize/Resize not working on Windows 10 When viewport is set, projectionAndView changes, but ID3D11DeviceContext_UpdateSubresource was not called.

8ab698af

2019-03-21T10:39:49

opengles2: Fix static analysis warning. Not clear if this could ever dereference NULL in real life, but better safe than sorry!

b2e76d86

2019-03-19T16:52:09

Fixed Windows RT build

b28e956b

2019-03-12T07:59:53

Fixed bug 4542 - Image flipped vertically when rendering on texture Have to recompute viewport because projection/glOrtho is different wether rendering is on target texture or not

40781dfb

2019-02-04T23:35:18

opengles2: patched to compile.

b7504f31

2019-02-04T23:32:28

opengles2: keep cached texturing state correct.

a609c03a

2019-02-04T23:24:10

opengles1: keep cached texturing state correct.

40a52cee

2019-02-04T18:55:39

render: Fix OpenGL draw state cache for various points of texture binding.

07548602

2019-01-19T16:47:43

Fixed bug 3657 - Color-key doesn't work when an alpha channel is present When surface format is the same as renderer format, it still needs an intermediate conversion to transform colorkey to alpha.

be991f3a

2019-01-12T13:34:03

Fixed bug 4453 - GLES / GLES2: first white renderer clear cmd is drawn as black

5e13087b

2019-01-04T22:01:14

9cdd0dd9

2018-12-29T17:59:34

PSP renderer: use colors from 'draw' union (very likely, but un-tested)

ebd9efb3

2018-12-29T16:37:44

opengles 1: same fix as in bug #4433

87b76369

2018-12-29T16:34:50

opengles 1: use color from 'draw' union in SetDrawState()

dc344360

2018-12-21T20:53:31

render: Fix internal state getting out of sync when destroying a texture that was just rendered and then creating a new one, in the GL and GLES2 backends. Fixes bug #4433.

0a705901

2018-12-19T18:10:02

render: Prefer the Metal renderer over OpenGL. This is the best option for macOS and iOS, the only platforms with Metal. Pre-Metal versions of these platforms will fall back to OpenGL (ES), as appropriate. Huge thanks to Alexander Szpakowski, who worked incredibly hard to get the Metal renderer to such a high-quality state!

c7db6ade

2018-12-19T18:27:21

metal: Implement SDL_LockTexture for YUV formats.

ce8c716a

2018-12-18T14:23:05

metal: Implement SDL_LockTexture for non-YUV textures.

e5476c65

2018-12-15T14:50:12

Fixed bug 4425 - promote to alpha format, palette surface with alpha values. SDL_CreateTextureFromSurface() forgets to choose a texture format with alpha for surfaces that have palettes with alpha values.

kc3-lang/SDL/src/render

src/render

Log