kmx git

Commit	Date	Message
0789610c	2021-10-14T00:52:05	Add SDL_HINT_WINDOW_NO_ACTIVATION_WHEN_SHOWN
1fa154fd	2021-10-13T09:33:54	Fix weak enforcement of timeouts in SDL_WaitEventTimeout_Device. This will loop pumping events and waiting for a system event to come in. However not all system events will turn into an SDL event. It's not unusual for a Windows message to be some internal thing that SDL doesn't convert into a message. In that case the loop will simple circle but not exit. As long as such messages are coming in the loop will continue to run regardless of the timeout. When messages finally stop it'll still wait for the full timeout so you can have arbitrarily long delays. Instead do an absolute elapsed time check since the start of the wait. If that is exceeded during any iteration the routine exits as the timeout has elapsed.
2423c514	2021-10-13T09:33:51	Work around hang in AAudioStream_write() during extended shared object loading while running in a debugger. Observed on a OnePlus 8T (KB2005) running Oxygen OS 11.0.10.10.KB05AA. The observed behavior is that any nonzero timeout value would hang until the device was paused and resumed. And a zero timeout value would always return 0 frames written even when audio fragments could be heard. Making a manual timeout system unworkable. None of the straightforward systems imply that there's a detectable problem before the call to AAudioStream_write(). And the callback set within AAudioStreamBuilder_setErrorCallback() does not get called as we enter the hang state. I've found that AAudioStream_getTimestamp() will report an error state from another thread. So this change codifies that behavior a bit until a better fix or more root cause can be found.
0e294e90	2021-10-12T18:55:31	Ensure that SDL_InitSubSystem quits subsystems after an error. (#4834) * Ensure that SDL_InitSubSystem quits subsystems after an error. * Fix unnecessary change.
6149e601	2021-10-13T00:03:56	remove IsWin10FCUorNewer() -- not used since commit 40ed9f75c9e1ed
311671a0	2021-10-12T23:50:02	fixed build after commit 6e356e20ad
6e356e20	2021-10-12T18:35:52	Fix mouse focus being set to null when a captured mouse cursor leaves the window.
9ee6942e	2021-09-22T14:01:00	Improve RISC OS implementations of SDL_GetBasePath and SDL_GetPrefPath
3db898c5	2020-02-13T22:32:35	riscos: Implement SDL_GetPrefPath()
40ed9f75	2021-10-08T10:05:27	Workaround for Windows occasionally ignoring SetCursorPos() calls Also, since we're flushing mouse motion before and including the warp, we don't need the isWin10FCUorNewer hack to simulate mouse warp motion. Fixes https://github.com/libsdl-org/SDL/issues/4339 and https://github.com/libsdl-org/SDL/issues/4165
373216ae	2021-10-07T18:14:16	Added support for touchpads in the Linux evdev code (thanks Francisco!)
16aeb8d0	2021-10-07T15:04:06	Guarantee that we don't dispatch any mouse motion from before or including the last mouse warp
649466f4	2021-10-07T13:28:44	Flush any pending mouse motion when warping the mouse cursor Fixes https://github.com/libsdl-org/SDL/issues/4165
ad520573	2021-10-06T09:52:06	wayland: Only dispatch frame events in Wayland_GLES_SwapWindow Dispatching all events in Wayland_GLES_SwapWindow leads to resizes being acked before the program has a chance to handle the resize. This change reduces jumping on fullscreen transition with apps that call SDL_PollEvent before issuing any render calls.
dd95c9c8	2021-10-06T09:09:39	Moved focus click check into WIN_UpdateFocus() so we have the correct state when setting keyboard focus Fixes https://github.com/libsdl-org/SDL/issues/4817
1ec409c2	2021-10-06T09:09:09	Don't warp the mouse within a window while it's minimized
0d541e5a	2021-10-06T00:36:27	Revert "Fixed relative mode mouse events stopping if you click on the title bar" This has been better fixed by b28ed02 or another related relative mouse mode change of @slouken in SDL 2.0.17 and as such can be reverted to reduce unneeded processing in WM_MOUSEMOVE
c542de92	2021-10-05T14:08:36	React to WM_NCACTIVATE instead of WM_SETFOCUS or WM_ACTIVATE for focus changes See https://github.com/libsdl-org/SDL/pull/4293 and https://github.com/libsdl-org/SDL/issues/4450 for details
f080273a	2021-10-04T22:00:16	PSP: add implementation for RenderGeometry
e92a639b	2021-10-04T23:00:28	replaced many uses of libc calls with SDL_ counterparts in os2 sources. TODO: core/os2 and geniconv sources _must_ be updated, as well..
dd9b2daf	2021-10-04T21:56:42	PSP: fixed build
3ea35fe5	2021-10-04T21:32:00	fix SDL_atoi() fixes https://github.com/libsdl-org/SDL/issues/4811
c501d159	2021-10-03T14:10:21	Fixed range for Steam Controller sensor values
ea1a2b94	2021-10-02T09:12:57	Use the correct update rate for Steam Controller sensors
eadc8f93	2021-10-02T23:08:39	wayland: Cleanup some SDL_TryLockMutex() calls. Check the result of these against 0 explicitly, so that it's obvious we're bailing out on failure, not success.
25f9e32b	2021-10-02T16:52:43	wayland: Don't let multiple threads dispatch wayland events at once wl_display_dispatch() will block if there are no events available, and while we try to avoid this by using SDL_IOReady() to verify there are events before calling it, there is a race condition between SDL_IOReady() and wl_display_dispatch() if multiple threads are involved. This is made more likely by the fact that SDL_GL_SwapWindow() calls wl_display_dispatch() if vsync is enabled, in order to wait for frame events. Therefore any program which pumps events on a different thread from SDL_GL_SwapWindow() could end up blocking in one or other of them until another event arrives. This change fixes this by wrapping wl_display_dispatch() in a new mutex, which ensures only one thread can compete for wayland events at a time, and hence the SDL_IOReady() check should successfully prevent either from blocking.
8b745752	2021-10-01T21:32:21	Added support for the gyro and accelerometer on Steam Controllers Fixes https://github.com/libsdl-org/SDL/issues/4577
db18764e	2021-10-01T16:27:59	Use correct relative include path
632aca29	2021-10-01T16:17:38	Window input focus is based on WM_SETFOCUS and WM_KILLFOCUS as WM_ACTIVATE doesn't necessarily imply focus. Hopefully resolves https://github.com/libsdl-org/SDL/issues/4450 and https://github.com/libsdl-org/SDL/pull/4293
9706feac	2021-10-01T15:11:25	Update length after shortening string (thanks mayraud705!) Closes https://github.com/libsdl-org/SDL/pull/4698
77acd44f	2021-10-01T22:30:51	DirectFB: fixed creation of palette textures
83d60090	2021-09-30T23:47:37	DirectFB: add partial support for RenderGeometry allow to fill triangles with color or texture but only uniform vertex color is handled (not per vertex color)
c270949b	2021-09-28T18:07:22	Add a fast path for ARGB888->(A)BGR888 blending with pixel alpha
114d1d46	2021-09-27T23:18:25	direct3d: Remove unnecessary render target support check. Direct3D 9 dictates that caps.NumSimultaneousRTs must always be at least 1, which is to say that Direct3D 9 level hardware must always support render targets. (caps.NumSimultaneousRTs is meant to show if you can draw to multiple render targets in a single draw call.) We had already hardcoded SDL_RENDERER_TARGETTEXTURE as available earlier in the function anyhow. Fixes #4781.
0fc43504	2021-09-27T16:41:43	wayland: Add support for XCURSOR_THEME/SIZE
7c050aa6	2021-09-27T13:53:16	egl: Don't fail to create a context if KHR_create_context_no_error is unsupported
35d04558	2021-09-27T16:57:09	video: wayland: Support displays with a 0 refresh rate Some wayland compositors report the refresh rate as 0. Since we want to force a minimum refresh rate of 10 frames worth, we were dividing by the reported refresh rate, causing a divide-by-zero. If the refresh rate is 0, instead force a frame every second if no frame callbacks are received. This fixes bug #4785
9672d581	2021-09-26T14:22:11	Need to check structure version before setting xdg_toplevel to NULL
14f22519	2021-09-26T18:11:22	Use SDL_calloc for allocation of gxm_texture
b592e78f	2021-09-25T12:55:41	wayland: Expose xdg_toplevel to SysWM
477fcf52	2021-09-24T10:49:46	Fixed whitespace
db68af80	2021-09-24T10:49:44	Reduce the likelyhood that the mouse will hover over the taskbar or toast notification while in relative mode, which causes a mouse leave event. This will still happen occasionally as the mouse is whipped around, if there is a window overlapping the game window, but it should happen less often now. This could even happen with the original code that warped the mouse every frame, so this should be a good compromise where we don't warp the mouse continously and we still keep the mouse in the safe area of the game window. Note that notifications can be any size, so the safe area may need to be adjusted or even dynamically defined via a hint.
7ed415d2	2021-09-23T14:07:38	wayland: Reuse KeySymToUcs4 to replicate X11 keymap behavior
1a4e2e5e	2021-09-23T14:31:54	wayland: For text, ignore key events when Ctrl is held Fixes #4695
0aff42a1	2021-09-23T00:02:44	egl: Group data fields before function pointers in SDL_EGL_VideoData.
0ad4956c	2021-09-23T00:00:46	egl: explicitly call eglBindAPI during SDL_GL_MakeCurrent. The EGL API binding must be specified per-thread, per the docs. Fixes #1820.
31477160	2021-09-22T09:27:41	egl: make an int into an SDL_bool.
4ec259a7	2021-09-22T19:06:11	Fixed building on Visual Studio 2013 and older
287571fb	2021-09-22T17:40:57	Limit effect of in_title_click and focus_click_pending to only blocking cursor warping; without this all relative mouse motion was getting ignored when a window was activated via a mouse button
52921563	2021-09-22T21:23:42	End Scene on RunCommandQueue on Vita
08ae7904	2021-09-14T20:38:03	Replace calls to asprintf with SDL_asprintf
25a614bc	2021-09-14T20:37:35	Add SDL_asprintf and SDL_vasprintf
79b0aae8	2021-09-22T11:42:10	The return value of SDL_snprintf is the number of characters that would have been written. Fixes https://github.com/libsdl-org/SDL/issues/4762
9b74623b	2021-09-22T13:52:36	wayland: Woops, forgot to assign cursor theme size...
8e54698a	2021-09-22T13:26:44	wayland: Add support for high-DPI cursors
432ee7d8	2021-09-22T09:29:21	Fixed building SDL_dynapi.c without stdio support
345c161f	2021-09-22T09:06:45	Fixed some accidental uses of external C runtime functions
5d455cab	2021-09-21T18:15:11	Don't process raw input when the window is being dragged or clicked on.
0fd54f91	2021-09-21T18:15:11	Fixed using a tablet with raw input relative motion Tested with a Wacom Cintiq Pro 16"
8fee82d1	2021-09-21T18:15:09	Improve relative motion handling over RDP CR and research: @danielj
eb3bf80f	2021-09-21T18:15:09	Fixed compiler warnings using Visual Studio 2019
ce11caa8	2021-09-21T16:41:29	alsa: Map 7.1 audio channels to match what Windows and macOS expect. This matches what we did a long time ago for 5.1 audio. Fixes #55. (FIFTY FIVE. Bug reported 15 years, 3 months, and 11 days ago! lol)
9886d897	2021-09-21T16:23:48	Fix AltiVec detection on FreeBSD The previous code was not correct, because there's no PPC_FEATURE_HAS_ALTIVEC MIB. Instead, elf vector check should be done.
c45facf2	2021-09-21T11:13:46	alsa: clean up macro salsa a little.
3b2fbb1c	2021-09-20T23:44:22	End current scene before destroying the texture on Vita
fc4296c1	2021-09-20T23:02:43	Use aligned stride in sceGxmColorSurfaceInit
7080bc2a	2021-09-20T23:02:01	Fallback to SCE_KERNEL_MEMBLOCK_TYPE_USER_RW_UNCACHE if CDRAM texture allocation fails
512355d7	2021-09-20T20:21:05	Vita: fix thread detach. Remove leftover KillThread
ddcd847c	2021-09-20T14:08:01	Vita: fix thread priority Add support for thread name and stack size
478f9eed	2021-09-20T10:20:04	x11: Don't include X11/extensions/extutil.h We don't use it, it was a leftover from 1.2, I think, and it doesn't exist on Solaris, so this should hopefully fix the build there. This also means we don't need the configure/cmake checks for SDL_VIDEO_DRIVER_X11_CONST_PARAM_XEXTADDDISPLAY, so that was removed also. Fixes #1666.
ca9a3217	2021-09-19T15:47:24	render: GL/GLES now draw lines almost perfectly matching software renderer. One place known to differ in a significant way is a single line segment that starts and ends on the same point; the GL renderers will light up a single pixel here, whereas the software renderer will not. My current belief is this is a bug in the software renderer, based on the wording of the docs: "SDL_RenderDrawLine() draws the line to include both end points." You can see an example program that triggers that difference in Bug #2006. As it stands, the GL renderers might _also_ render diagonal lines differently, as the the Bresenham step might vary between implementations (one does three pixels and then two, the other does two and then three, etc). But this patch causes those lines to start and end on the correct pixel, and that's the best we can do, and all anyone really needs here. Not closing any bugs with this patch (yet!), but here are several that it appears to fix. If no other corner cases pop up, we'll call this done. Reference Bug #2006. Reference Bug #1626. Reference Bug #4001. ...and probably others...
857cc7c0	2021-09-19T00:05:21	render: constified some local variables in SDL_AllocateRenderVertices.
5faea84c	2021-09-18T11:54:25	render: Mark viewport/cliprect dirty when window is resized. Fixes #4751.
5dccffd7	2021-08-23T21:16:58	Allow usage of the new Condition Variable code with Critical Sections Vista and later provide the SleepConditionVariableCS() function for this. Since SDL_syscond_srw.c doesn't require SRW locks anymore, rename it to SDL_syscond_cv.c which better reflects the implementation of condition variables rather than the implementation of mutexes. Fixes #4051.
ebdfd0e1	2021-09-17T00:45:07	atomic: detect clang separately
8d1e0ca3	2021-09-16T12:48:39	Vita: add support for disabling 'screensaver' (screen dimming and suspend)
79ec8986	2021-09-16T12:47:45	Vita: refactor gxm texture render and add SDL_RenderGeometry support
2a8938f2	2021-09-15T12:40:22	Fixed: Whitespace being striped from the end of IME strings incorrectly + Regression with SDL_SetTextInputRect (#4752) * Fixed: Whitespace being striped from the end of IME strings incorrectly * Fixed: Google IME Candidate Window not placing correctly * Why are PostBuild events stored in the vcxproj and not a user file? * Revert SDL.vcxproj properly... * Remove whitespace as per code review * Fix Werror=declaration-after-statement error in code
ce177049	2021-09-12T09:34:41	Vita: Allow completely skipping pvr init to override apphint from app
4a994733	2021-09-14T15:51:17	`SDL_RenderSetVSync()`: Restrict `vsync` to 0 or 1 In the future, we might want to support special swap intervals. To prevent applications from expecting nonzero values of vsync to be the same as "on", fail with SDL_Unsupported() if the value passed is neither 0 nor 1.
4549769d	2021-03-07T15:20:45	Add `SDL_RenderSetVSync()` Currently, if an application wants to toggle VSync, they'd have to tear down the renderer and recreate it. This patch fixes that by letting applications call SDL_RenderSetVSync(). This is the same as the patch in #3673, except it applies to all renderers (including PSP, even thought it seems that the VSync flag is disabled for that renderer). Furthermore, the renderer flags also change as well, which #3673 didn't do. It is also an API instead of using hint callbacks (which could be potentially dangerous). Closes #3673.
b2504b5d	2021-09-11T20:08:03	Fix typos
e4556594	2021-09-10T21:13:51	Simplify Backspace and Enter
f162d9ee	2021-09-10T21:02:22	Fix Indentation
058c4d36	2021-09-10T20:55:49	Add envvar to disable touchpads independently
4435543d	2021-09-10T20:01:40	Add PVR On Screen Keyboard Support
10d3df44	2021-09-09T12:46:28	Vita: fix copyright dates
2a836860	2021-09-09T12:36:40	Fix default path
134dd468	2021-08-16T19:08:12	Add pvr gles/gles2 context support
ff85d4fb	2021-09-08T17:51:47	Fixed Xbox Series X controller being detected by both IOKit and GCController on macOS
9f855258	2021-09-08T17:50:17	Added mapping for Xbox One S controller with newer firmware on macOS
bf97c5a2	2021-09-08T14:47:40	Make sure SDL file descriptors don't leak into child processes
d49d955d	2021-09-08T11:44:17	render: SDL_RenderGeometry should still render when hidden, in most cases. (otherwise render targets may fail, etc...the check is a legacy helper for iOS apps that crash if you try to use OpenGL while in the background.)
7d66fa20	2021-09-07T17:38:26	Fixed double-copy of the report in BlueZ >= 5.56
7ed7644a	2021-09-07T17:37:47	Fixed compiling HIDAPI Steam Controller support with C89 compiler
27a48b14	2021-09-07T15:50:21	Check the pathname first, as that's a faster check for XInput devices
6f972052	2021-08-30T12:21:05	Added: Support for showing the IME Candidate Window on Windows
183eb067	2021-09-01T15:46:32	Fixed bug #4711: prevent opengl SDL_renderer from crashing if GL_ARB_multitexture isn't supported
515b7e93	2021-08-27T17:02:07	Fix horizontal wheel scroll direction of X11.
a1ffeda0	2021-08-28T22:52:13	Add SDL_HINT_APP_NAME and DBUS inhibition hint See SDL bug #4703. This implements two new hints: - SDL_APP_NAME - SDL_SCREENSAVER_INHIBIT_ACTIVITY_NAME The former is the successor to SDL_HINT_AUDIO_DEVICE_APP_NAME, and acts as a generic "application name" used both by audio drivers and DBUS screensaver inhibition. If SDL_AUDIO_DEVICE_APP_NAME is set, it will still take priority over SDL_APP_NAME. The second allows the "activity name" used by org.freedesktop.ScreenSavver's Inhibit method, which are often shown in the UI as the reason the screensaver (and/or suspend/other power-managment features) are disabled.

0789610c

2021-10-14T00:52:05

Add SDL_HINT_WINDOW_NO_ACTIVATION_WHEN_SHOWN

1fa154fd

2021-10-13T09:33:54

Fix weak enforcement of timeouts in SDL_WaitEventTimeout_Device. This will loop pumping events and waiting for a system event to come in. However not all system events will turn into an SDL event. It's not unusual for a Windows message to be some internal thing that SDL doesn't convert into a message. In that case the loop will simple circle but not exit. As long as such messages are coming in the loop will continue to run regardless of the timeout. When messages finally stop it'll still wait for the full timeout so you can have arbitrarily long delays. Instead do an absolute elapsed time check since the start of the wait. If that is exceeded during any iteration the routine exits as the timeout has elapsed.

2423c514

2021-10-13T09:33:51

Work around hang in AAudioStream_write() during extended shared object loading while running in a debugger. Observed on a OnePlus 8T (KB2005) running Oxygen OS 11.0.10.10.KB05AA. The observed behavior is that any nonzero timeout value would hang until the device was paused and resumed. And a zero timeout value would always return 0 frames written even when audio fragments could be heard. Making a manual timeout system unworkable. None of the straightforward systems imply that there's a detectable problem before the call to AAudioStream_write(). And the callback set within AAudioStreamBuilder_setErrorCallback() does not get called as we enter the hang state. I've found that AAudioStream_getTimestamp() will report an error state from another thread. So this change codifies that behavior a bit until a better fix or more root cause can be found.

0e294e90

2021-10-12T18:55:31

Ensure that SDL_InitSubSystem quits subsystems after an error. (#4834) * Ensure that SDL_InitSubSystem quits subsystems after an error. * Fix unnecessary change.

6149e601

2021-10-13T00:03:56

remove IsWin10FCUorNewer() -- not used since commit 40ed9f75c9e1ed

311671a0

2021-10-12T23:50:02

fixed build after commit 6e356e20ad

6e356e20

2021-10-12T18:35:52

Fix mouse focus being set to null when a captured mouse cursor leaves the window.

9ee6942e

2021-09-22T14:01:00

Improve RISC OS implementations of SDL_GetBasePath and SDL_GetPrefPath

3db898c5

2020-02-13T22:32:35

riscos: Implement SDL_GetPrefPath()

40ed9f75

2021-10-08T10:05:27

Workaround for Windows occasionally ignoring SetCursorPos() calls Also, since we're flushing mouse motion before and including the warp, we don't need the isWin10FCUorNewer hack to simulate mouse warp motion. Fixes https://github.com/libsdl-org/SDL/issues/4339 and https://github.com/libsdl-org/SDL/issues/4165

373216ae

2021-10-07T18:14:16

Added support for touchpads in the Linux evdev code (thanks Francisco!)

16aeb8d0

2021-10-07T15:04:06

Guarantee that we don't dispatch any mouse motion from before or including the last mouse warp

649466f4

2021-10-07T13:28:44

Flush any pending mouse motion when warping the mouse cursor Fixes https://github.com/libsdl-org/SDL/issues/4165

ad520573

2021-10-06T09:52:06

wayland: Only dispatch frame events in Wayland_GLES_SwapWindow Dispatching all events in Wayland_GLES_SwapWindow leads to resizes being acked before the program has a chance to handle the resize. This change reduces jumping on fullscreen transition with apps that call SDL_PollEvent before issuing any render calls.

dd95c9c8

2021-10-06T09:09:39

Moved focus click check into WIN_UpdateFocus() so we have the correct state when setting keyboard focus Fixes https://github.com/libsdl-org/SDL/issues/4817

1ec409c2

2021-10-06T09:09:09

Don't warp the mouse within a window while it's minimized

0d541e5a

2021-10-06T00:36:27

Revert "Fixed relative mode mouse events stopping if you click on the title bar" This has been better fixed by b28ed02 or another related relative mouse mode change of @slouken in SDL 2.0.17 and as such can be reverted to reduce unneeded processing in WM_MOUSEMOVE

c542de92

2021-10-05T14:08:36

React to WM_NCACTIVATE instead of WM_SETFOCUS or WM_ACTIVATE for focus changes See https://github.com/libsdl-org/SDL/pull/4293 and https://github.com/libsdl-org/SDL/issues/4450 for details

f080273a

2021-10-04T22:00:16

PSP: add implementation for RenderGeometry

e92a639b

2021-10-04T23:00:28

replaced many uses of libc calls with SDL_ counterparts in os2 sources. TODO: core/os2 and geniconv sources _must_ be updated, as well..

dd9b2daf

2021-10-04T21:56:42

PSP: fixed build

3ea35fe5

2021-10-04T21:32:00

fix SDL_atoi() fixes https://github.com/libsdl-org/SDL/issues/4811

c501d159

2021-10-03T14:10:21

Fixed range for Steam Controller sensor values

ea1a2b94

2021-10-02T09:12:57

Use the correct update rate for Steam Controller sensors

eadc8f93

2021-10-02T23:08:39

wayland: Cleanup some SDL_TryLockMutex() calls. Check the result of these against 0 explicitly, so that it's obvious we're bailing out on failure, not success.

25f9e32b

2021-10-02T16:52:43

wayland: Don't let multiple threads dispatch wayland events at once wl_display_dispatch() will block if there are no events available, and while we try to avoid this by using SDL_IOReady() to verify there are events before calling it, there is a race condition between SDL_IOReady() and wl_display_dispatch() if multiple threads are involved. This is made more likely by the fact that SDL_GL_SwapWindow() calls wl_display_dispatch() if vsync is enabled, in order to wait for frame events. Therefore any program which pumps events on a different thread from SDL_GL_SwapWindow() could end up blocking in one or other of them until another event arrives. This change fixes this by wrapping wl_display_dispatch() in a new mutex, which ensures only one thread can compete for wayland events at a time, and hence the SDL_IOReady() check should successfully prevent either from blocking.

8b745752

2021-10-01T21:32:21

Added support for the gyro and accelerometer on Steam Controllers Fixes https://github.com/libsdl-org/SDL/issues/4577

db18764e

2021-10-01T16:27:59

Use correct relative include path

632aca29

2021-10-01T16:17:38

Window input focus is based on WM_SETFOCUS and WM_KILLFOCUS as WM_ACTIVATE doesn't necessarily imply focus. Hopefully resolves https://github.com/libsdl-org/SDL/issues/4450 and https://github.com/libsdl-org/SDL/pull/4293

9706feac

2021-10-01T15:11:25

Update length after shortening string (thanks mayraud705!) Closes https://github.com/libsdl-org/SDL/pull/4698

77acd44f

2021-10-01T22:30:51

DirectFB: fixed creation of palette textures

83d60090

2021-09-30T23:47:37

DirectFB: add partial support for RenderGeometry allow to fill triangles with color or texture but only uniform vertex color is handled (not per vertex color)

c270949b

2021-09-28T18:07:22

Add a fast path for ARGB888->(A)BGR888 blending with pixel alpha

114d1d46

2021-09-27T23:18:25

direct3d: Remove unnecessary render target support check. Direct3D 9 dictates that caps.NumSimultaneousRTs must always be at least 1, which is to say that Direct3D 9 level hardware must always support render targets. (caps.NumSimultaneousRTs is meant to show if you can draw to multiple render targets in a single draw call.) We had already hardcoded SDL_RENDERER_TARGETTEXTURE as available earlier in the function anyhow. Fixes #4781.

0fc43504

2021-09-27T16:41:43

wayland: Add support for XCURSOR_THEME/SIZE

7c050aa6

2021-09-27T13:53:16

egl: Don't fail to create a context if KHR_create_context_no_error is unsupported

35d04558

2021-09-27T16:57:09

video: wayland: Support displays with a 0 refresh rate Some wayland compositors report the refresh rate as 0. Since we want to force a minimum refresh rate of 10 frames worth, we were dividing by the reported refresh rate, causing a divide-by-zero. If the refresh rate is 0, instead force a frame every second if no frame callbacks are received. This fixes bug #4785

9672d581

2021-09-26T14:22:11

Need to check structure version before setting xdg_toplevel to NULL

14f22519

2021-09-26T18:11:22

Use SDL_calloc for allocation of gxm_texture

b592e78f

2021-09-25T12:55:41

wayland: Expose xdg_toplevel to SysWM

477fcf52

2021-09-24T10:49:46

Fixed whitespace

db68af80

2021-09-24T10:49:44

Reduce the likelyhood that the mouse will hover over the taskbar or toast notification while in relative mode, which causes a mouse leave event. This will still happen occasionally as the mouse is whipped around, if there is a window overlapping the game window, but it should happen less often now. This could even happen with the original code that warped the mouse every frame, so this should be a good compromise where we don't warp the mouse continously and we still keep the mouse in the safe area of the game window. Note that notifications can be any size, so the safe area may need to be adjusted or even dynamically defined via a hint.

7ed415d2

2021-09-23T14:07:38

wayland: Reuse KeySymToUcs4 to replicate X11 keymap behavior

1a4e2e5e

2021-09-23T14:31:54

wayland: For text, ignore key events when Ctrl is held Fixes #4695

0aff42a1

2021-09-23T00:02:44

egl: Group data fields before function pointers in SDL_EGL_VideoData.

0ad4956c

2021-09-23T00:00:46

egl: explicitly call eglBindAPI during SDL_GL_MakeCurrent. The EGL API binding must be specified per-thread, per the docs. Fixes #1820.

31477160

2021-09-22T09:27:41

egl: make an int into an SDL_bool.

4ec259a7

2021-09-22T19:06:11

Fixed building on Visual Studio 2013 and older

287571fb

2021-09-22T17:40:57

Limit effect of in_title_click and focus_click_pending to only blocking cursor warping; without this all relative mouse motion was getting ignored when a window was activated via a mouse button

52921563

2021-09-22T21:23:42

End Scene on RunCommandQueue on Vita

08ae7904

2021-09-14T20:38:03

Replace calls to asprintf with SDL_asprintf

25a614bc

2021-09-14T20:37:35

Add SDL_asprintf and SDL_vasprintf

79b0aae8

2021-09-22T11:42:10

The return value of SDL_snprintf is the number of characters that would have been written. Fixes https://github.com/libsdl-org/SDL/issues/4762

9b74623b

2021-09-22T13:52:36

wayland: Woops, forgot to assign cursor theme size...

8e54698a

2021-09-22T13:26:44

wayland: Add support for high-DPI cursors

432ee7d8

2021-09-22T09:29:21

Fixed building SDL_dynapi.c without stdio support

345c161f

2021-09-22T09:06:45

Fixed some accidental uses of external C runtime functions

5d455cab

2021-09-21T18:15:11

Don't process raw input when the window is being dragged or clicked on.

0fd54f91

2021-09-21T18:15:11

Fixed using a tablet with raw input relative motion Tested with a Wacom Cintiq Pro 16"

8fee82d1

2021-09-21T18:15:09

Improve relative motion handling over RDP CR and research: @danielj

eb3bf80f

2021-09-21T18:15:09

Fixed compiler warnings using Visual Studio 2019

ce11caa8

2021-09-21T16:41:29

alsa: Map 7.1 audio channels to match what Windows and macOS expect. This matches what we did a long time ago for 5.1 audio. Fixes #55. (FIFTY FIVE. Bug reported 15 years, 3 months, and 11 days ago! lol)

9886d897

2021-09-21T16:23:48

Fix AltiVec detection on FreeBSD The previous code was not correct, because there's no PPC_FEATURE_HAS_ALTIVEC MIB. Instead, elf vector check should be done.

c45facf2

2021-09-21T11:13:46

alsa: clean up macro salsa a little.

3b2fbb1c

2021-09-20T23:44:22

End current scene before destroying the texture on Vita

fc4296c1

2021-09-20T23:02:43

Use aligned stride in sceGxmColorSurfaceInit

7080bc2a

2021-09-20T23:02:01

Fallback to SCE_KERNEL_MEMBLOCK_TYPE_USER_RW_UNCACHE if CDRAM texture allocation fails

512355d7

2021-09-20T20:21:05

Vita: fix thread detach. Remove leftover KillThread

ddcd847c

2021-09-20T14:08:01

Vita: fix thread priority Add support for thread name and stack size

478f9eed

2021-09-20T10:20:04

x11: Don't include X11/extensions/extutil.h We don't use it, it was a leftover from 1.2, I think, and it doesn't exist on Solaris, so this should hopefully fix the build there. This also means we don't need the configure/cmake checks for SDL_VIDEO_DRIVER_X11_CONST_PARAM_XEXTADDDISPLAY, so that was removed also. Fixes #1666.

ca9a3217

2021-09-19T15:47:24

render: GL/GLES now draw lines almost perfectly matching software renderer. One place known to differ in a significant way is a single line segment that starts and ends on the same point; the GL renderers will light up a single pixel here, whereas the software renderer will not. My current belief is this is a bug in the software renderer, based on the wording of the docs: "SDL_RenderDrawLine() draws the line to include both end points." You can see an example program that triggers that difference in Bug #2006. As it stands, the GL renderers might _also_ render diagonal lines differently, as the the Bresenham step might vary between implementations (one does three pixels and then two, the other does two and then three, etc). But this patch causes those lines to start and end on the correct pixel, and that's the best we can do, and all anyone really needs here. Not closing any bugs with this patch (yet!), but here are several that it appears to fix. If no other corner cases pop up, we'll call this done. Reference Bug #2006. Reference Bug #1626. Reference Bug #4001. ...and probably others...

857cc7c0

2021-09-19T00:05:21

render: constified some local variables in SDL_AllocateRenderVertices.

5faea84c

2021-09-18T11:54:25

render: Mark viewport/cliprect dirty when window is resized. Fixes #4751.

5dccffd7

2021-08-23T21:16:58

Allow usage of the new Condition Variable code with Critical Sections Vista and later provide the SleepConditionVariableCS() function for this. Since SDL_syscond_srw.c doesn't require SRW locks anymore, rename it to SDL_syscond_cv.c which better reflects the implementation of condition variables rather than the implementation of mutexes. Fixes #4051.

ebdfd0e1

2021-09-17T00:45:07

atomic: detect clang separately

8d1e0ca3

2021-09-16T12:48:39

Vita: add support for disabling 'screensaver' (screen dimming and suspend)

79ec8986

2021-09-16T12:47:45

Vita: refactor gxm texture render and add SDL_RenderGeometry support

2a8938f2

2021-09-15T12:40:22

Fixed: Whitespace being striped from the end of IME strings incorrectly + Regression with SDL_SetTextInputRect (#4752) * Fixed: Whitespace being striped from the end of IME strings incorrectly * Fixed: Google IME Candidate Window not placing correctly * Why are PostBuild events stored in the vcxproj and not a user file? * Revert SDL.vcxproj properly... * Remove whitespace as per code review * Fix Werror=declaration-after-statement error in code

ce177049

2021-09-12T09:34:41

Vita: Allow completely skipping pvr init to override apphint from app

4a994733

2021-09-14T15:51:17

`SDL_RenderSetVSync()`: Restrict `vsync` to 0 or 1 In the future, we might want to support special swap intervals. To prevent applications from expecting nonzero values of vsync to be the same as "on", fail with SDL_Unsupported() if the value passed is neither 0 nor 1.

4549769d

2021-03-07T15:20:45

Add `SDL_RenderSetVSync()` Currently, if an application wants to toggle VSync, they'd have to tear down the renderer and recreate it. This patch fixes that by letting applications call SDL_RenderSetVSync(). This is the same as the patch in #3673, except it applies to all renderers (including PSP, even thought it seems that the VSync flag is disabled for that renderer). Furthermore, the renderer flags also change as well, which #3673 didn't do. It is also an API instead of using hint callbacks (which could be potentially dangerous). Closes #3673.

b2504b5d

2021-09-11T20:08:03

Fix typos

e4556594

2021-09-10T21:13:51

Simplify Backspace and Enter

f162d9ee

2021-09-10T21:02:22

Fix Indentation

058c4d36

2021-09-10T20:55:49

Add envvar to disable touchpads independently

4435543d

2021-09-10T20:01:40

Add PVR On Screen Keyboard Support

10d3df44

2021-09-09T12:46:28

Vita: fix copyright dates

2a836860

2021-09-09T12:36:40

Fix default path

134dd468

2021-08-16T19:08:12

Add pvr gles/gles2 context support

ff85d4fb

2021-09-08T17:51:47

Fixed Xbox Series X controller being detected by both IOKit and GCController on macOS

9f855258

2021-09-08T17:50:17

Added mapping for Xbox One S controller with newer firmware on macOS

bf97c5a2

2021-09-08T14:47:40

Make sure SDL file descriptors don't leak into child processes

d49d955d

2021-09-08T11:44:17

render: SDL_RenderGeometry should still render when hidden, in most cases. (otherwise render targets may fail, etc...the check is a legacy helper for iOS apps that crash if you try to use OpenGL while in the background.)

7d66fa20

2021-09-07T17:38:26

Fixed double-copy of the report in BlueZ >= 5.56

7ed7644a

2021-09-07T17:37:47

Fixed compiling HIDAPI Steam Controller support with C89 compiler

27a48b14

2021-09-07T15:50:21

Check the pathname first, as that's a faster check for XInput devices

6f972052

2021-08-30T12:21:05

Added: Support for showing the IME Candidate Window on Windows

183eb067

2021-09-01T15:46:32

Fixed bug #4711: prevent opengl SDL_renderer from crashing if GL_ARB_multitexture isn't supported

515b7e93

2021-08-27T17:02:07

Fix horizontal wheel scroll direction of X11.

a1ffeda0

2021-08-28T22:52:13

Add SDL_HINT_APP_NAME and DBUS inhibition hint See SDL bug #4703. This implements two new hints: - SDL_APP_NAME - SDL_SCREENSAVER_INHIBIT_ACTIVITY_NAME The former is the successor to SDL_HINT_AUDIO_DEVICE_APP_NAME, and acts as a generic "application name" used both by audio drivers and DBUS screensaver inhibition. If SDL_AUDIO_DEVICE_APP_NAME is set, it will still take priority over SDL_APP_NAME. The second allows the "activity name" used by org.freedesktop.ScreenSavver's Inhibit method, which are often shown in the UI as the reason the screensaver (and/or suspend/other power-managment features) are disabled.

kc3-lang/SDL/src

src

Log