|
3b191580
|
2022-06-27T17:19:39
|
|
Windows GDK Support (#5830)
* Added GDK
* Simplfied checks in SDL_config_wingdk.h
* Added testgdk sample
* Added GDK readme
* Fixed error in merge of SDL_windows.h
* Additional GDK fixes
* OpenWatcom should not export _SDL_GDKGetTaskQueue
* Formatting fixes
* Moved initialization code into SDL_GDKRunApp
|
|
adc68758
|
2022-06-17T10:22:28
|
|
Added SDL_copyp to avoid size mismatch when copying values (thanks @1bsyl!)
Closes https://github.com/libsdl-org/SDL/pull/5811
|
|
ab81a559
|
2022-06-07T02:01:27
|
|
Windows DPI scaling/highdpi support
Adds hint "SDL_WINDOWS_DPI_SCALING" which can be set to "1" to
change the SDL coordinate system units to be DPI-scaled points, rather
than pixels everywhere.
This means windows will be appropriately sized, even when created on
high-DPI displays with scaling.
e.g. requesting a 640x480 window from SDL, on a display with 125%
scaling in Windows display settings, will create a window with an
800x600 client area (in pixels).
Setting this to "1" implicitly requests process DPI awareness
(setting SDL_WINDOWS_DPI_AWARENESS is unnecessary),
and forces SDL_WINDOW_ALLOW_HIGHDPI on all windows.
|
|
|
ae2cc29f
|
2022-06-03T09:44:34
|
|
Make sure initial state is set correctly for the D3D renderer
Fixes https://github.com/libsdl-org/SDL/issues/5749
|
|
9dfa000b
|
2022-05-18T20:20:03
|
|
Initial support for building for Windows with OpenWatcom
|
|
|
c8eea020
|
2022-05-18T21:14:20
|
|
Fix C89 build errors in Windows builds
|
|
7bc498d3
|
2022-03-27T09:12:12
|
|
direct3d: Implement missing blend operations.
This is only for Direct3D 9; Direct3D 11 already had this implemented.
Fixes #5375.
|
|
bf698689
|
2022-03-10T01:55:04
|
|
reduced a few ifdefs, fixed an unused warning if built w/o SDL_HAVE_YUV.
|
|
|
c6eef542
|
2022-03-09T13:48:31
|
|
Removed dead code
|
|
911ba8d3
|
2022-02-05T12:30:45
|
|
hide impossible branch in D3D_UnlockTexture
|
|
|
3f8b450d
|
2022-02-05T12:22:34
|
|
extend the code hidden by SDL_HAVE_YUV
|
|
|
2cfc83ea
|
2022-01-22T17:10:37
|
|
sync D3D_RenderReadPixels with D3D11_RenderReadPixels
- use the result of SDL_ConvertPixels to propagate error
- get rid of the verbose error message of D3D11_RenderReadPixels in case SDL_ConvertPixels failed
|
|
|
60deadba
|
2022-01-17T17:22:30
|
|
re-use return value of SDL_SetError/WIN_SetErrorFromHRESULT/SDL_OutOfMemory
|
|
|
18e4d9fe
|
2022-01-08T09:02:25
|
|
Re-enable line drawing path in render drivers
This is still used for scaled line drawing in RenderDrawLinesWithRects()
|
|
9cb2c549
|
2022-01-07T22:43:30
|
|
Remove QueueDrawLines from D3D, D3D11
|
|
|
120c76c8
|
2022-01-03T09:40:00
|
|
Updated copyright for 2022
|
|
3a5e148b
|
2021-12-14T11:02:07
|
|
Renderer backends use SDL_Color instead of int for geometry colors.
|
|
|
b08e57e9
|
2021-12-14T09:32:05
|
|
Don't try to create a vbo if we aren't using any vertices
|
|
|
3a31a450
|
2021-11-10T05:24:31
|
|
End the scene before resetting the D3D device, since we'll start with BeginScene after that.
If we don't do this, we'll end up with unbalanced Begin/End scene pairs which causes D3DERR_INVALIDCALL in the present.
Fixes https://github.com/libsdl-org/SDL/issues/4933
|
|
|
b3f9d8f3
|
2021-10-25T07:05:50
|
|
remove unused local vars after the latest commits.
|
|
|
ab758398
|
2021-09-20T16:53:03
|
|
Direct3D: remove RenderCopy and RenderCopyEx from back-end
|
|
|
f02ad282
|
2021-09-25T11:31:18
|
|
Remove FillRects from back-end, where RenderGeometry can be used
|
|
|
114d1d46
|
2021-09-27T23:18:25
|
|
direct3d: Remove unnecessary render target support check.
Direct3D 9 dictates that caps.NumSimultaneousRTs must always be at least 1,
which is to say that Direct3D 9 level hardware must always support render
targets.
(caps.NumSimultaneousRTs is meant to show if you can draw to multiple render
targets in a single draw call.)
We had already hardcoded SDL_RENDERER_TARGETTEXTURE as available earlier in
the function anyhow.
Fixes #4781.
|
|
4549769d
|
2021-03-07T15:20:45
|
|
Add `SDL_RenderSetVSync()`
Currently, if an application wants to toggle VSync, they'd have to tear
down the renderer and recreate it. This patch fixes that by letting
applications call SDL_RenderSetVSync().
This is the same as the patch in #3673, except it applies to all
renderers (including PSP, even thought it seems that the VSync flag is
disabled for that renderer). Furthermore, the renderer flags also change
as well, which #3673 didn't do. It is also an API instead of using hint
callbacks (which could be potentially dangerous).
Closes #3673.
|
|
|
54ca1d19
|
2021-08-27T07:44:03
|
|
SW_RenderGeometry: add a redundant check to clear static analysis (see bug #4600)
|
|
|
e426bb80
|
2021-08-20T07:50:30
|
|
Fixed bug #4671 - D3D_QueueGeometry: use "count / 3" (Thanks alittlesail!)
|
|
|
ae5336a3
|
2021-08-19T14:03:10
|
|
Fixed bug #4669: D3D_QueueGeometry: -0.5f offset position of vertexs
This similar to D3D_QueueCopy positions
|
|
|
a8f89a01
|
2021-04-23T12:00:14
|
|
Change 'size_indice' to 'size_indices'
|
|
|
47db47c1
|
2021-04-06T21:32:02
|
|
Add SDL_HAVE_RENDER_GEOMETRY to compile or not with RenderGeometry support
|
|
|
32e79101
|
2021-04-01T20:27:22
|
|
Fix warnings
|
|
|
4869a3d2
|
2021-04-01T14:36:31
|
|
Add Direct3D9 implementation (not tested)
|
|
|
5fc13fcb
|
2021-08-04T07:00:17
|
|
direct3d: Commit viewport state before clearing, attempt 2.
This reintroduces the fix from 0e16ee8330606603, but just marks
the viewport state as dirty after a clear that needs to expand the
viewport to fill the render target, as we'll need to also reset
the orthographic projection state elsewhere, and that won't
happen if we clear the dirty flag here.
Fixes #4210.
(again.)
(...sorry...!)
|
|
|
9d64e6b4
|
2021-08-03T00:29:33
|
|
Revert "direct3d: Commit dirty viewport state before clearing."
This reverts commit 0e16ee833060660318cc324cf99c9736f4d48499.
|
|
|
0e16ee83
|
2021-08-03T02:07:47
|
|
direct3d: Commit dirty viewport state before clearing.
Otherwise you might have set the viewport to the full size of
the render target in SDL's API but this change hasn't been
transmitted to Direct3D yet by the time we attempt to clear.
Fixes #4210.
|
|
|
585c11c5
|
2021-07-30T00:33:15
|
|
direct3d: Fix possibly-incorrect scissor test when clearing.
Thanks to @JayFoxRox who did the detective work on this!
Fixes #3357.
|
|
|
f2a2d0c6
|
2021-02-15T22:56:20
|
|
SDL_render_d3d.c: fix build with SDL_LEAN_AND_MEAN
|
|
|
9130f7c3
|
2021-01-02T10:25:38
|
|
Updated copyright for 2021
|
|
|
cb361896
|
2020-12-09T07:16:22
|
|
Fixed bug 5235 - All internal sources should include SDL_assert.h
Ryan C. Gordon
We should really stick this in SDL_internal.h or something so it's always available.
|
|
|
b6afbe63
|
2020-04-07T09:38:57
|
|
Added SDL_log.h to SDL_internal.h so logging is available everywhere
|
|
|
c8c05a9f
|
2020-03-08T19:23:21
|
|
Fixed bug 4991 - Pixel shader problem when recreating a texture for direct3d renderer
cmediaplayer
Hi, i already mentioned in the SDL discourse a bug that recreating of a texture occours pixel shader problem on direct3d renderer. There is no problem for direct3d11. You can see the issue by using my app named C Media Player which is available for Windows for free using my web site www.cmediaplayer.com. Just follow the steps:
*Open a media file
*When playing the file change the scale quality under the video menu.
*You will see the problem.
|
|
|
367a3561
|
2020-03-08T18:56:07
|
|
Don't release the backbuffer on error, we didn't acquire it.
|
|
e152a3ce
|
2020-03-07T13:59:42
|
|
direct3d: Don't attempt to create zero sized vertex buffer
|
|
|
a8780c6a
|
2020-01-16T20:49:25
|
|
Updated copyright date for 2020
|
|
|
5e19e66c
|
2019-12-22T13:39:44
|
|
Fixed bug 4914 - Expose SDL_ScaleMode and add SDL_SetTextureScaleMode/SDL_GetTextureScaleMode
Konrad
This was something rather trivial to add, but asked at least several times before (I did google about it as well).
It should be possible to dynamically change scaling mode of the texture. It is actually trivial task, but until now it was only possible with a hint before creating a texture.
I needed it for my game as well, so I took the liberty of writing it myself.
This patch adds following functions:
SDL_SetTextureScaleMode(SDL_Texture * texture, SDL_ScaleMode scaleMode);
SDL_GetTextureScaleMode(SDL_Texture * texture, SDL_ScaleMode *scaleMode);
That way you can change texture scaling on the fly.
|
|
|
847bd8d9
|
2019-09-02T00:11:58
|
|
direct3d: Be more aggressive about resetting state when textures go away.
Fixes Bugzilla #4768.
|
|
|
31bb95f1
|
2019-06-21T15:07:39
|
|
direct3d: Use D3DPOOL_DEFAULT for vertex buffers after all, release correctly.
Fixes Bugzilla #4679.
Fixes Bugzilla #4537.
|
|
|
e681623c
|
2019-06-20T19:51:00
|
|
direct3d: Fix dirty textures failing to update
Even if the texture itself has not changed since last time, the data may have
so we must call UpdateDirtyTexture() to handle that possibility.
|
|
|
a2f2b735
|
2019-06-11T13:02:56
|
|
direct3d: Use D3DPOOL_MANAGED for vertex buffers.
Fixes Bugzilla #4537.
|
|
|
f7b7a972
|
2019-06-11T10:12:47
|
|
direct3d: Fixed SDL_RenderSetClipRect usage.
Fixes Bugzilla #4459.
|
|
|
4f59d372
|
2019-06-11T09:29:48
|
|
direct3d: don't dereference bogus pointer if current texture was destroyed.
Fixes Bugzilla #4460.
|
|
|
a6af0b82
|
2019-06-11T02:31:57
|
|
direct3d: Fixed more compiler warnings on Visual Studio 64-bit builds.
|
|
|
b2e76d86
|
2019-03-19T16:52:09
|
|
Fixed Windows RT build
|
|
|
5e13087b
|
2019-01-04T22:01:14
|
|
Updated copyright for 2019
|
|
|
cca9d24c
|
2018-12-03T09:26:05
|
|
direct3d: be more aggressive about resetting invalidated cached state.
Fixes Bugzilla #4402.
|
|
|
33f78eb1
|
2018-12-03T01:58:23
|
|
direct3d: Make sure streaming textures update before being used for drawing.
Fixes Bugzilla #4402.
|
|
|
b744108a
|
2018-12-02T21:57:33
|
|
Patched to compile on C89 compilers.
|
|
|
3c936150
|
2018-12-02T20:55:57
|
|
direct3d: Release and NULL out vertex buffers on reset.
Otherwise they are irretrievably lost on window resize, etc, which makes
rendering freeze and other disasters.
Fixes Bugzilla #4358.
|
|
|
9719f89d
|
2018-11-17T12:12:29
|
|
Back out change initializing renderer blend mode incorrectly.
|
|
|
29e15ce6
|
2018-11-17T00:58:45
|
|
The default draw blendmode is SDL_BLENDMODE_NONE
|
|
|
4659e738
|
2018-11-01T12:31:45
|
|
merge fallout: Patched to compile, fixed some compiler warnings, etc.
|
|
|
fcb46813
|
2018-10-01T13:41:15
|
|
render: D3D9 doesn't need to check for stream offset support anymore.
We don't use offsets at all now. Too slow.
|
|
|
709f5ee4
|
2018-10-01T11:32:08
|
|
render: Set the D3D9 stream source once and choose offsets during draw calls.
This is _much_ faster than setting the offsets with SetStreamSource!
|
|
|
9870746b
|
2018-10-01T03:02:54
|
|
render: Patched to compile.
|
|
|
5e644cfd
|
2018-10-01T01:23:02
|
|
render: first shot at moving Direct3D 9 backend to new interface. Untested!
|
|
|
eb14b635
|
2018-05-07T19:52:25
|
|
Fixed bug 4134 - Render targets lose scale quality after minimizing a fullscreen window
Olli-Samuli Lehmus
If one creates a window with the SDL_WINDOW_FULLSCREEN_DESKTOP flag, and creates a render target with SDL_SetHint(SDL_HINT_RENDER_SCALE_QUALITY, "linear"), and afterwards sets SDL_SetHint(SDL_HINT_RENDER_SCALE_QUALITY, "nearest"), after minimizing the window, the scale quality hint is lost on the render target. Textures however do keep their interpolation modes.
|
|
|
e3cc5b2c
|
2018-01-03T10:03:25
|
|
Updated copyright for 2018
|
|
|
cac4e312
|
2017-12-08T11:34:32
|
|
Added check for failure of D3D_ActivateRenderer()
|
|
|
1a1cd8c1
|
2017-12-08T11:09:05
|
|
Fixed bug 1878 - Scaled texture draws with filtering produce wrapping artifacts.
Yuri K. Schlesner
When using texture filtering, there are filtering artifacts visible on the edges of scaled textures, where the texture filtering pulls in texels from the other side of the texture. Using clamping texture modes wouldn't completely fix this since source rectangles don't need to cover the whole texture. (See screenshot attached in next post.)
The opengl driver uses clamping on textures and so avoid this at least in the cases where the source rect is the whole texture. The direct3d driver does not and so has problems in every case. I'm not sure if it can actually completely be fixed, but at least enabling clamping for direct3d would be one step in the right direction.
|
|
|
a6a4e27a
|
2017-11-12T22:51:12
|
|
Updated SDL's YUV support, many thanks to Adrien Descamps
New functions get and set the YUV colorspace conversion mode:
SDL_SetYUVConversionMode()
SDL_GetYUVConversionMode()
SDL_GetYUVConversionModeForResolution()
SDL_ConvertPixels() converts between all supported RGB and YUV formats, with SSE acceleration for converting from planar YUV formats (YV12, NV12, etc) to common RGB/RGBA formats.
Added a new test program, testyuv, to verify correctness and speed of YUV conversion functionality.
|
|
|
30d554e3
|
2017-08-19T03:07:44
|
|
Fixed building SDL applications with Visual Studio and the clang toolset
Also fixed building 64-bit SDL with clang. 32-bit doesn't build because of the inline assembly for C runtime support.
|
|
|
c59d9923
|
2017-08-14T05:51:44
|
|
Implemented more flexible blending modes for accelerated renderers
This fixes bug 2594 - Propose new blend mode, SDL_BLENDMODE_BLEND_DSTA
blendMode = SDL_ComposeCustomBlendMode(SDL_BLENDFACTOR_SRC_ALPHA,
SDL_BLENDFACTOR_ONE_MINUS_SRC_ALPHA,
SDL_BLENDOPERATION_ADD,
SDL_BLENDFACTOR_ZERO,
SDL_BLENDFACTOR_ONE,
SDL_BLENDOPERATION_ADD);
This fixes bug 2828 - Subtractive Blending
blendMode = SDL_ComposeCustomBlendMode(SDL_BLENDFACTOR_SRC_ALPHA,
SDL_BLENDFACTOR_ONE,
SDL_BLENDOPERATION_SUBTRACT,
SDL_BLENDFACTOR_ZERO,
SDL_BLENDFACTOR_ONE,
SDL_BLENDOPERATION_SUBTRACT);
This goes partway to fixing bug 3684 - Add support for a pre-multiplied alpha blending mode
blendMode = SDL_ComposeCustomBlendMode(SDL_BLENDFACTOR_ONE,
SDL_BLENDFACTOR_ONE_MINUS_SRC_ALPHA,
SDL_BLENDOPERATION_ADD,
SDL_BLENDFACTOR_ONE,
SDL_BLENDFACTOR_ONE_MINUS_SRC_ALPHA,
SDL_BLENDOPERATION_ADD);
|
|
|
45b774e3
|
2017-01-01T18:33:28
|
|
Updated copyright for 2017
|
|
|
4ed4997c
|
2016-11-06T08:42:46
|
|
Fixed bug 2421 for D3D9 - SDL_RenderCopyEx off by one when rotating by 90 and -90
Nader Golbaz
Updated patch for direct3d renderers
|
|
|
27d4f099
|
2016-10-07T23:40:44
|
|
Implemented SDL_GetHintBoolean() to make it easier to check boolean hints
|
|
|
77305d47
|
2016-10-01T11:46:32
|
|
Fixed bug 3345 - SDL_RenderClear inconsistency with ClipRect
Simon Hug
The description of the SDL_RenderClear function in the SDL_render.h header says the following:
"This function clears the entire rendering target, ignoring the viewport."
The word "entire" implies that the clipping rectangle set with SDL_RenderSetClipRect also gets ignored. This is left somewhat ambiguous if only the viewport is mentioned. Minor thing, but let's see what the implementations actually do.
The software renderer ignores the clipping rectangle when clearing. It even has a comment on this: /* By definition the clear ignores the clip rect */
Most other render drivers (opengl, opengles, opengles2, direct3d, and psp [I assume. Can't test it.]) use the scissor test for the ClipRect and don't disable it when clearing. Clearing will only happen within the clipping rectangle for these drivers.
An exception is direct3d11 which uses a clear function that ignores the scissor test.
|
|
23af328b
|
2016-06-24T22:17:56
|
|
Fixed Bug 3147 - Windows: Crash when resizing Window since hg 1f9d57965528
Thanks for the fix, Gab!
|
|
|
42065e78
|
2016-01-02T10:10:34
|
|
Updated copyright to 2016
|
|
0e45984f
|
2015-06-21T17:33:46
|
|
Fixed crash if initialization of EGL failed but was tried again later.
The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly
uninitialized data structure if loading the library first failed. A later try to
use EGL then skipped initialization and assumed it was previously successful
because the data structure now already existed. This led to at least one crash
in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was
dereferenced to make a call to eglBindAPI().
|
|
|
38549a7b
|
2015-06-04T00:56:11
|
|
Fixed bug 2625 - Direct3D9 with SDL_TEXTUREACCESS_TARGET textures causes an application crash
Roberto
I have debugged the code checking the function calls when Direct3D is the renderer, remember that with software and OpenGL renderers, this issue is not happening.
- Create the texture:
SDL_Texture *pTex = SDL_CreateTexture(pRenderer, iFormat, SDL_TEXTUREACCESS_TARGET, pSurf->w, pSurf->h);
- Update the texture:
SDL_UpdateTexture(pTex, NULL, pSurf->pixels, pSurf->pitch);
SDL_render.c, SDL_UpdateTexture(): return renderer->UpdateTexture(renderer, texture, rect, pixels, pitch);
SDL_render_d3d.c, D3D_UpdateTexture(): if (D3D_UpdateTextureRep(data->device, &texturedata->texture, texture->format, rect->x, rect->y, rect->w, rect->h, pixels, pitch) < 0) {
SDL_render_d3d.c, D3D_UpdateTextureRep(): if (D3D_CreateStagingTexture(device, texture) < 0) {
SDL_render_d3d.c, D3D_CreateStagingTexture(): result = IDirect3DDevice9_CreateTexture(..., D3DPOOL_SYSTEMMEM, ...) --> FAIL! with INVALIDCALL code
After checking a bit the Microsoft documentation, I found this:
D3DUSAGE_RENDERTARGET can only be used with D3DPOOL_DEFAULT. (https://msdn.microsoft.com/en-us/library/windows/desktop/bb172625%28v=vs.85%29.aspx)
The call that fails, is using D3DUSAGE_RENDERTARGET with D3DPOOL_SYSTEMMEM which is unsupported, hence the INVALIDCALL return code.
|
|
|
da190975
|
2015-05-28T18:57:10
|
|
Fixed clip rectangle calculation when there is a viewport offset
|
|
|
2c4a6ea0
|
2015-05-26T06:27:46
|
|
Updated the copyright year to 2015
|
|
|
b72938c8
|
2015-04-20T12:22:44
|
|
Windows: Always set the system timer resolution to 1ms by default.
An existing hint lets apps that don't need the timer resolution changed avoid
this, to save battery, etc, but this fixes several problems in timing, audio
callbacks not firing fast enough, etc.
Fixes Bugzilla #2944.
|
|
|
fe6c797c
|
2015-04-10T23:30:31
|
|
Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.
|
|
b88ca1b4
|
2015-02-10T16:28:56
|
|
the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here.
Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture.
More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802
|
|
|
b48e54aa
|
2015-01-26T22:00:29
|
|
Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation
Jonas Kulla
The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c.
I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.
|
|
|
70438be2
|
2014-12-03T10:55:23
|
|
WinRT: fixed bug whereby SDL would override an app's default orientation
WinRT apps can set a default, preferred orientation via a .appxmanifest file.
SDL was overriding this on app startup, and making the app use all possible
orientations (landscape and portrait).
Thanks to Eric Wing for the heads up on this!
|
|
|
9c398852
|
2014-11-22T22:20:40
|
|
Corrected header file documentation comment.
|
|
24c86b55
|
2014-09-11T19:24:42
|
|
[X11] Reconcile logical keyboard state with physical state on FocusIn
since the window system doesn't do it for us like other platforms.
This prevents sticky keys and missed keys when going in and out
of focus, for example Alt would appear to stick if switching away
from an SDL app with Alt-Tab and had to be pressed again.
CR: Sam
|
|
|
de3d381c
|
2014-08-17T14:44:53
|
|
Fixed bug 2685 - SDL_RenderReadPixels() doesn't work with offscreen targets
Andreas Falkenhahn
SDL_RenderReadPixels() doesn't seem to work when trying to read pixels from a texture that has been created using SDL_TEXTUREACCESS_TARGET and has been selected as the render target using SDL_SetRenderTarget().
I am attaching a small program that demonstrates the issue. I get the following result here:
READ PIXEL RETURN: 0 --- COLOR CHECK: ff000000
But it should be:
READ PIXEL RETURN: 0 --- COLOR CHECK: ffff0000
Tested with SDL 2.0.3 on Windows 7.
|
|
|
d673d8c3
|
2014-08-16T23:17:47
|
|
Fixed bugs 2677 and 2625, made it possible to lock render targets in D3D
|
|
|
1ee96bb9
|
2014-07-07T10:26:28
|
|
Fixed mingw64 build and warnings
|
|
2748e282
|
2014-07-03T10:22:12
|
|
The YUV offset is 16 / 255, not 16 / 256
|
|
|
4fd03b95
|
2014-06-04T10:57:52
|
|
Setting the window size changes the fullscreen display mode, unless a window display mode has been set.
Testing:
* Ran testsprite2 --fullscreen, used Ctrl+ and Ctrl- to change window sizes, verified that the display mode changed as well.
|
|
|
c15e26d7
|
2014-06-04T10:57:40
|
|
Fixed crash and lost pixel data when recovering from a lost device situation (e.g. alt-tab from fullscreen)
|
|
|
49c53fd2
|
2014-05-31T11:37:12
|
|
Use D3D9Ex when available
This hopefully works around crashes in Intel D3D9 support in Windows 8.1.
|
|
|
9bc47465
|
2014-05-18T21:11:30
|
|
Changed C++ style comments.
|
|
defd90b6
|
2014-04-19T13:15:41
|
|
Render: Allow empty cliprect.
This fixes an issue where an empty cliprect is treated the same as a NULL
cliprect, causing the render backends to disable clipping.
Also adds a new API, SDL_RenderIsClipEnabled(render) that allows you to
differentiate between:
- SDL_RenderSetClipRect(render, NULL)
- SDL_Rect r = {0,0,0,0}; SDL_RenderSetClipRect(render, &r);
Fixes https://bugzilla.libsdl.org/show_bug.cgi?id=2504
|
|
|
3dcb451f
|
2014-04-09T21:29:19
|
|
Added a README file regarding WinRT support
To note, this file is currently formatted with CRLF line endings, rather than
LF, to allow the file to be viewed with Notepad.
|
|
|
2c558ca2
|
2014-03-10T17:19:19
|
|
Fixed D3D9 initialization on Windows 8, which doesn't have D3DX
|
|
|
a8f540fe
|
2014-03-09T22:48:38
|
|
Fixed renderer flags to include support for target textures after the renderer is created.
|